aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/phy/phy-msm-usb.c
AgeCommit message (Collapse)Author
2016-02-23usb: phy: msm: Trigger USB state detection work in DRD modeIvan T. Ivanov
When working in Dual Role Device mode, USB state machine is not kicked, when host or gadget drivers are loaded. Fix this be explicitly triggering state detection on client driver load. Issue is that if the board is booted without micro usb cable and usb device attached, kernel fails to populate the usb host and device. The reason for this is that the state machine worker logic only checks for USB_DR_MODE_PERIPHERAL and USB_DR_MODE_HOST modes to run worker thread. However if the phy is configured in OTG mode it would fail to run the state machine, resulting in failure to detect for very first time. This patch fixes the issue by removing the explicit checks. Issue is noticed on Qualcomm Dragon board DB410C. [srinivas.kandagatla@linaro.org: Added more details to log] Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-03usb: phy: msm: fix error handling in probe.Srinivas Kandagatla
This driver registers for extcon events as part of its probe, but never unregisters them in case of error in the probe path. There were multiple issues noticed due to this missing error handling. One of them is random crashes if the regulators are not ready yet by the time probe is invoked. Ivan's previous attempt [1] to fix this issue, did not really address all the failure cases like regualtor/get_irq failures. [1] https://lkml.org/lkml/2015/9/7/62 Without this patch the kernel would carsh with log: ... Unable to handle kernel paging request at virtual address 17d78410 pgd = ffffffc001a5c000 [17d78410] *pgd=00000000b6806003, *pud=00000000b6806003, *pmd=0000000000000000 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.4.0+ #48 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Workqueue: deferwq deferred_probe_work_func task: ffffffc03686e900 ti: ffffffc0368b0000 task.ti: ffffffc0368b0000 PC is at raw_notifier_chain_register+0x1c/0x44 LR is at extcon_register_notifier+0x88/0xc8 pc : [<ffffffc0000da43c>] lr : [<ffffffc000606298>] pstate: 80000085 sp : ffffffc0368b3a70 x29: ffffffc0368b3a70 x28: ffffffc03680c310 x27: ffffffc035518000 x26: ffffffc035518000 x25: ffffffc03bfa20e0 x24: ffffffc035580a18 x23: 0000000000000000 x22: ffffffc035518458 x21: ffffffc0355e9a60 x20: ffffffc035518000 x19: 0000000000000000 x18: 0000000000000028 x17: 0000000000000003 x16: ffffffc0018153c8 x15: 0000000000000001 x14: ffffffc03686f0f8 x13: ffffffc03686f0f8 x12: 0000000000000003 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc03686f0f8 x8 : 0000e3872014c1a1 x7 : 0000000000000028 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000000 x3 : 00000000354fb170 x2 : 0000000017d78400 x1 : ffffffc0355e9a60 x0 : ffffffc0354fb268 Fixes: 591fc116f330 ("usb: phy: msm: Use extcon framework for VBUS and ID detection") CC: Stable <stable@vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2015-12-08usb: phy: msm: fix a possible NULL dereferenceLABBE Corentin
of_match_device could return NULL, and so cause a NULL pointer dereference later. Even if the probability of this case is very low, fixing it made static analyzers happy. Solving this with of_device_get_match_data made also code simplier. Reported-by: coverity (CID 1324133) Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-27usb: common: of_usb_get_dr_mode to usb_get_dr_modeHeikki Krogerus
By using the unified device property interface, the function can be made available for all platforms and not just the ones using DT. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-30usb: phy: msm: Add D+/D- lines route controlIvan T. Ivanov
apq8016-sbc board is using Dual SPDT USB Switch (TC7USB40MU), witch is controlled by GPIO to de/multiplex D+/D- USB lines to USB2513B Hub and uB connector. Add support for this. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29usb: phy: msm-usb: Replace deprecated API of extconChanwoo Choi
This patch removes the deprecated notifier API of extcon framwork and then use the new extcon API with the unique id to indicate the each external connector (USB, USB-HOST). Alter deprecated API as following: - extcon_register_interest() -> extcon_register_notifier() - extcon_get_cable_state(*edev, char *) -> extcon_get_cable_state_(*edev, id) Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-28usb: phy: msm: Manual PHY and LINK controller VBUS change notificationIvan T. Ivanov
VBUS is not routed to USB PHY on recent Qualcomm platforms. USB controller must see VBUS in order to pull-up DP when setting RS bit. Henc configure USB PHY and LINK registers sense VBUS and enable manual pullup on D+ line. Cc: Vamsi Krishna <vskrishn@codeaurora.org> Cc: Mayank Rana <mrana@codeaurora.org> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-28usb: phy: msm: Use extcon framework for VBUS and ID detectionIvan T. Ivanov
On recent Qualcomm platforms VBUS and ID lines are not routed to USB PHY LINK controller. Use extcon framework to receive connect and disconnect ID and VBUS notification. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-13Merge tag 'usb-4.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver updates from Greg KH: "Here's the big USB (and PHY) driver patchset for 4.1-rc1. Everything here has been in linux-next, and the full details are below in the shortlog. Nothing major, just the normal round of new drivers,api updates, and other changes, mostly in the USB gadget area, as usual" * tag 'usb-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (252 commits) drivers/usb/core: devio.c: Removed an uneeded space before tab usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resume usb: chipidea: debug: add low power mode check before print registers usb: chipidea: udc: bypass pullup DP when gadget connect in OTG fsm mode usb: core: hub: use new USB_RESUME_TIMEOUT usb: isp1760: hcd: use new USB_RESUME_TIMEOUT usb: dwc2: hcd: use new USB_RESUME_TIMEOUT usb: host: sl811: use new USB_RESUME_TIMEOUT usb: host: r8a66597: use new USB_RESUME_TIMEOUT usb: host: oxu210hp: use new USB_RESUME_TIMEOUT usb: host: fusbh200: use new USB_RESUME_TIMEOUT usb: host: fotg210: use new USB_RESUME_TIMEOUT usb: host: isp116x: use new USB_RESUME_TIMEOUT usb: musb: use new USB_RESUME_TIMEOUT usb: host: uhci: use new USB_RESUME_TIMEOUT usb: host: ehci: use new USB_RESUME_TIMEOUT usb: host: xhci: use new USB_RESUME_TIMEOUT usb: define a generic USB_RESUME_TIMEOUT macro usb: musb: dsps: fix build on i386 when COMPILE_TEST is set ehci-hub: use USB_DT_HUB ...
2015-03-18usb: phy: msm: Remove dead codeStephen Boyd
This code is no longer used now that mach-msm has been removed. Delete it. Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09usb: phy: phy-msm-usb: Rename regulator_set_optimum_modeBjorn Andersson
The function regulator_set_optimum_mode() is changing name to regulator_set_load(), so update the code accordingly. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-14Merge tag 'usb-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big set of USB and PHY patches for 3.19-rc1. The normal churn in the USB gadget area is in here, as well as xhci and other individual USB driver updates. The PHY tree is also in here, as there were dependancies on the USB tree. All of these have been in linux-next" * tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits) arm: omap3: twl: remove usb phy init data usbip: fix error handling in stub_probe() usb: gadget: udc: missing curly braces USB: mos7720: delete some unneeded code wusb: replace memset by memzero_explicit usbip: remove unneeded structure usb: xhci: fix comment for PORT_DEV_REMOVE xhci: don't use the same variable for stopped and halted rings current TD xhci: clear extra bits from slot context when setting max exit latency xhci: cleanup finish_td function USB: adutux: NULL dereferences on disconnect usb: chipidea: fix platform_no_drv_owner.cocci warnings usb: chipidea: Fixed a few typos in comments Documentation: bindings: add doc for the USB2 ChipIdea USB driver usb: chipidea: add a usb2 driver for ci13xxx usb: chipidea: fix phy handling usb: chipidea: remove duplicate dev_set_drvdata for host_start usb: chipidea: parameter 'mode' isn't needed for hw_device_reset usb: chipidea: add controller reset API usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER ...
2014-12-04USB / PM: Drop CONFIG_PM_RUNTIME from the USB coreRafael J. Wysocki
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM (or even dropped in some cases). Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code and documentation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-03usb: rename phy to usb_phy in OTGAntoine Tenart
This patch prepares the introduction of the generic PHY support in the USB OTG common functions. The USB PHY member of the OTG structure is renamed to 'usb_phy' and modifications are done in all drivers accessing it. Renaming this pointer will allow to keep the compatibility for USB PHY drivers. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03usb: move the OTG state from the USB PHY to the OTG structureAntoine Tenart
Before using the PHY framework instead of the USB PHY one, we need to move the OTG state into another place, since it won't be available when USB PHY isn't used. This patch moves the OTG state into the OTG structure, and makes all the needed modifications in the drivers using the OTG state. [ balbi@ti.com : fix build regressions with phy-tahvo.c, musb_dsps.c, phy-isp1301-omap, and chipidea's debug.c ] Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03usb: phy: phy-msm-usb: delete unnecessary 'out of memory' messagesPeter Chen
The memory subsystem has already had similar message for it. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-28USB: Remove .owner field for driverKiran Padwal
There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Reviewed-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08Merge tag 'v3.17-rc4' into nextFelipe Balbi
Merge Linux 3.17-rc4 here so we have all the latest fixes on next too. This also cleans up a few conflicts when applying patches. Signed-off-by: Felipe Balbi <balbi@ti.com> Conflicts: drivers/usb/gadget/Makefile drivers/usb/gadget/function/Makefile drivers/usb/gadget/legacy/Makefile drivers/usb/phy/phy-samsung-usb.h
2014-08-27usb: phy: msm: Make phy_reset clk and reset line optional.Srinivas Kandagatla
This patch makes the phy reset clk and reset line optional as this clk is not available on boards like IFC6410 with APQ8064. phy-reset clk is only used as argument to the mach level callbacks, so this patch adds condition before clk_get calls so that the driver wouldn't fail on SOCs which do not have this support. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-20usb: phy: msm: mark msm_otg_mode_fops staticFelipe Balbi
that declaration is only used inside this driver, marking it static. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-19usb: phy: msm: Fix return value check in msm_otg_probe()Wei Yongjun
In case of error, the function devm_ioremap_nocache() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-21Merge tag 'usb-for-v3.17' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.17 merge window Surprisingly enough, while a big set of patches, the majority is composed of cleanups (using devm_*, fixing sparse errors, moving code around, adding const, etc). The highlights are addition of new support for PLX USB338x devices, and support for USB 2.0-only configurations of the DWC3 IP core. Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-06-30usb: phy: msm: Do not do runtime pm if the phy is not idleSrinivas Kandagatla
Use case is when the phy is configured in host mode and a usb device is attached to board before bootup. On bootup, with the existing code and runtime pm enabled, the driver would decrement the pm usage count without checking the current state of the phy. This pm usage count decrement would trigger the runtime pm which than would abort the usb enumeration which was in progress. In my case a usb stick gets detected and then immediatly the driver goes to low power mode which is not correct. log: [ 1.631412] msm_hsusb_host 12520000.usb: EHCI Host Controller [ 1.636556] msm_hsusb_host 12520000.usb: new USB bus registered, assigned bus number 1 [ 1.642563] msm_hsusb_host 12520000.usb: irq 220, io mem 0x12520000 [ 1.658197] msm_hsusb_host 12520000.usb: USB 2.0 started, EHCI 1.00 [ 1.659473] hub 1-0:1.0: USB hub found [ 1.663415] hub 1-0:1.0: 1 port detected ... [ 1.973352] usb 1-1: new high-speed USB device number 2 using msm_hsusb_host [ 2.107707] usb-storage 1-1:1.0: USB Mass Storage device detected [ 2.108993] scsi0 : usb-storage 1-1:1.0 [ 2.678341] msm_otg 12520000.phy: USB in low power mode [ 3.168977] usb 1-1: USB disconnect, device number 2 This issue was detected on IFC6410 board. This patch fixes the intial runtime pm trigger by checking the phy state and decrementing the pm use count only when the phy state is IDLE. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-30usb: phy: msm: Make phy_reset clk and reset line optional.Srinivas Kandagatla
This patch makes the phy reset clk and reset line optional as this clk is not available on boards like IFC6410 with APQ8064. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-30usb: phy: msm: Make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-23usb: phy: msm: fix bug in probe()Dan Carpenter
My previous patch introduced a bug which prevented this driver from loading. devm_ioremap_resource() has a call to devm_request_mem_region() which will fail because the address space is shared between this PHY driver and CI device controller driver. Fixes: 10f0577aa5cb ('usb: phy: msm: change devm_ioremap() to devm_ioremap_resource()') Reported-by:"Ivan T. Ivanov" <iivanov@mm-sol.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-14usb: phy: msm: change devm_ioremap() to devm_ioremap_resource()Dan Carpenter
There are several issues here: 1) platform_get_resource() can return NULL and that wasn't handled. 2) We should request the memory before we remap it, and devm_ioremap_resource() does that. 3) devm_ioremap() returns a NULL but we were checking for IS_ERR(). Fixes: 6b99c68ec1f9 ('usb: phy: msm: Migrate to Managed Device Resource allocation') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-12usb: phy: msm: switch over to writel()Felipe Balbi
Remove that single instance of writel_relaxed() call which is only available on ARM architecture. This will let us build test this driver on all different architectures. Reviewed-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-12usb: phy: msm: cast to enum msm_usb_phy_typeFelipe Balbi
this solves the following build warning found when running compile tests. drivers/usb/phy/phy-msm-usb.c: In function ‘msm_otg_read_dt’: drivers/usb/phy/phy-msm-usb.c:1459:20: warning: cast from pointer \ to integer of different size [-Wpointer-to-int-cast] pdata->phy_type = (int) id->data; ^ Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Use usb_add_phy_dev() to register deviceIvan T. Ivanov
There could be more than one USB2.0 PHY's on the platform. This will allow all of them to be registered successfully. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Vote for corner of VDD CX instead of voltage of VDD CXIvan T. Ivanov
New platform uses RBCPR hardware feature, with that voting for absolute voltage of VDD CX is not required. Hence vote for corner of VDD CX which uses nominal corner voltage on VDD CX. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Cc: Mayank Rana <mrana@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Handle disconnect eventsIvan T. Ivanov
Put the transceiver in non-driving mode. Otherwise host may not detect soft-disconnection. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Select secondary PHY via TCSRTim Bird
Select the secondary PHY using the TCSR register, if phy-num=1 in the DTS (or phy_number is set in the platform data). The SOC has 2 PHYs which can be used with the OTG port, and this code allows configuring the correct one. Note: This resolves the problem I was seeing where I couldn't get the USB driver working at all on a dragonboard, from cold boot. This patch depends on patch 5/14 from Ivan's msm USB patch set. It does not use DT for the register address, as there's no evidence that this address changes between SoC versions. Signed-off-by: Tim Bird <tim.bird@sonymobile.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Fix PTS definitions for MSM USB controllerTim Bird
Fix the value used for Parallel Transceiver Select (PTS) for the MSM USB controller. This is a standard chipidea PORTSC definition, where a PHY_TYPE of 10b (<<30) is ULPI and 11b (<<30) is SERIAL. Fix the definitions and use them correctly in the driver code. Signed-off-by: Tim Bird <tim.bird@sonymobile.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Correct USB PHY Reset sequence for newer platformIvan T. Ivanov
On few legacy platforms, USB PHY is having dedicated reset clk. It is used to reset USB PHY after putting USB PHY into low power mode and for calibration of USB PHY. Putting USB PHY into low power mode is causing ulpi read/write timeout as expected. USB PHY reset clk is not available on newer platform. For 28nm PHY, reset USB PHY after resetting USB LINK. Also reset USB PHY using USB_PHY_PON bit with USB_OTG_HS_PHY_CTRL register after programming USB PHY Override registers as suggested with hardware programming guidelines. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Tim Bird <tim.bird@sonymobile.com> Cc: Mayank Rana <mrana@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Add support for secondary PHY controlIvan T. Ivanov
Allow support to use 2nd HSPHY with USB2 Core. Some platforms may have configuration to allow USB controller work with any of the two HSPHYs present. By default driver configures USB core to use primary HSPHY. Add support to allow user select 2nd HSPHY using DT parameter. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Cc: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Use reset framework for LINK and PHY resetsIvan T. Ivanov
Using reset framework eliminate need of platform specific callbacks and enable reset lines to be specified in DT files. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Add device tree support and binding informationIvan T. Ivanov
Allows controller to be specified via device tree. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Properly check result from platform_get_irq()Ivan T. Ivanov
Function return negative code on error. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Remove HSUSB prefix from regulator namesIvan T. Ivanov
Prefix did not bring any useful information. Currently none of the MSM platforms define these regulators, so it is safe to rename them. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Remove unused pclk_src_nameIvan T. Ivanov
There are no references to 'pclk_src_name' in plaform code, so it is unused. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Replace custom enum usb_mode_type with enum usb_dr_modeIvan T. Ivanov
Use enum usb_dr_mode and drop default usb_dr_mode from platform data. USB DT bindings states: dr_mode: "...In case this attribute isn't passed via DT, USB DRD controllers should default to OTG...", so remove redundand field. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Fix checkpatch.pl warningsIvan T. Ivanov
This fixes following: WARNING: quoted string split across lines WARNING: Prefer seq_puts to seq_printf Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Remove unnecessarily check for valid regulators.Ivan T. Ivanov
Whether regulators are available or not is checked at driver probe. If they are not available driver will refuse to load, so no need to check them again. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Migrate to Managed Device Resource allocationIvan T. Ivanov
Move memory, regulators, clocks and irq allocation to devm_* variants. Properly check for valid clk handles. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Enable deferred driver probingIvan T. Ivanov
Using platform_driver_probe() prevent driver from requesting probe deferral. Fix this. While at that, also switch to module_platform_driver() and remove __init annotation from probe(). Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-30usb: phy: msm: Move global regulators variables to driver stateIvan T. Ivanov
Eliminating global variables allows driver to handle multiple device instances. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-24Merge 3.14-rc4 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-20usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEPJosh Cartwright
Both the PM_RUNTIME and PM_SLEEP callbacks call into the common msm_otg_{suspend,resume} routines, however these routines are only being built when CONFIG_PM_SLEEP. In addition, msm_otg_{suspend,resume} also depends on msm_hsusb_config_vddcx(), which is only built when CONFIG_PM_SLEEP. Fix the CONFIG_PM_RUNTIME, !CONFIG_PM_SLEEP case by changing the preprocessor conditional, and moving msm_hsusb_config_vddcx(). While we're here, eliminate the CONFIG_PM conditional for setting up the dev_pm_ops. This address the following errors Russell King has hit doing randconfig builds: drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_suspend': drivers/usb/phy/phy-msm-usb.c:1691:2: error: implicit declaration of function 'msm_otg_suspend' drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_resume': drivers/usb/phy/phy-msm-usb.c:1699:2: error: implicit declaration of function 'msm_otg_resume' Cc: Ivan T. Ivanov <iivanov@mm-sol.com> Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-07usb: phy: msm: tiny leak on error in probe()Dan Carpenter
Free "motog" on error. This is more to appease the static checkers than a real worry. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 05:15:32 +0000