summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-05-14mm, slub: move slub_debug static key enabling outside slab_mutexVlastimil Babka
Paul E. McKenney reported [1] that commit 1f0723a4c0df ("mm, slub: enable slub_debug static key when creating cache with explicit debug flags") results in the lockdep complaint: ====================================================== WARNING: possible circular locking dependency detected 5.12.0+ #15 Not tainted ------------------------------------------------------ rcu_torture_sta/109 is trying to acquire lock: ffffffff96063cd0 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_enable+0x9/0x20 but task is already holding lock: ffffffff96173c28 (slab_mutex){+.+.}-{3:3}, at: kmem_cache_create_usercopy+0x2d/0x250 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (slab_mutex){+.+.}-{3:3}: lock_acquire+0xb9/0x3a0 __mutex_lock+0x8d/0x920 slub_cpu_dead+0x15/0xf0 cpuhp_invoke_callback+0x17a/0x7c0 cpuhp_invoke_callback_range+0x3b/0x80 _cpu_down+0xdf/0x2a0 cpu_down+0x2c/0x50 device_offline+0x82/0xb0 remove_cpu+0x1a/0x30 torture_offline+0x80/0x140 torture_onoff+0x147/0x260 kthread+0x10a/0x140 ret_from_fork+0x22/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: check_prev_add+0x8f/0xbf0 __lock_acquire+0x13f0/0x1d80 lock_acquire+0xb9/0x3a0 cpus_read_lock+0x21/0xa0 static_key_enable+0x9/0x20 __kmem_cache_create+0x38d/0x430 kmem_cache_create_usercopy+0x146/0x250 kmem_cache_create+0xd/0x10 rcu_torture_stats+0x79/0x280 kthread+0x10a/0x140 ret_from_fork+0x22/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(slab_mutex); lock(cpu_hotplug_lock); lock(slab_mutex); lock(cpu_hotplug_lock); *** DEADLOCK *** 1 lock held by rcu_torture_sta/109: #0: ffffffff96173c28 (slab_mutex){+.+.}-{3:3}, at: kmem_cache_create_usercopy+0x2d/0x250 stack backtrace: CPU: 3 PID: 109 Comm: rcu_torture_sta Not tainted 5.12.0+ #15 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: dump_stack+0x6d/0x89 check_noncircular+0xfe/0x110 ? lock_is_held_type+0x98/0x110 check_prev_add+0x8f/0xbf0 __lock_acquire+0x13f0/0x1d80 lock_acquire+0xb9/0x3a0 ? static_key_enable+0x9/0x20 ? mark_held_locks+0x49/0x70 cpus_read_lock+0x21/0xa0 ? static_key_enable+0x9/0x20 static_key_enable+0x9/0x20 __kmem_cache_create+0x38d/0x430 kmem_cache_create_usercopy+0x146/0x250 ? rcu_torture_stats_print+0xd0/0xd0 kmem_cache_create+0xd/0x10 rcu_torture_stats+0x79/0x280 ? rcu_torture_stats_print+0xd0/0xd0 kthread+0x10a/0x140 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 This is because there's one order of locking from the hotplug callbacks: lock(cpu_hotplug_lock); // from hotplug machinery itself lock(slab_mutex); // in e.g. slab_mem_going_offline_callback() And commit 1f0723a4c0df made the reverse sequence possible: lock(slab_mutex); // in kmem_cache_create_usercopy() lock(cpu_hotplug_lock); // kmem_cache_open() -> static_key_enable() The simplest fix is to move static_key_enable() to a place before slab_mutex is taken. That means kmem_cache_create_usercopy() in mm/slab_common.c which is not ideal for SLUB-specific code, but the #ifdef CONFIG_SLUB_DEBUG makes it at least self-contained and obvious. [1] https://lore.kernel.org/lkml/20210502171827.GA3670492@paulmck-ThinkPad-P17-Gen-1/ Link: https://lkml.kernel.org/r/20210504120019.26791-1-vbabka@suse.cz Fixes: 1f0723a4c0df ("mm, slub: enable slub_debug static key when creating cache with explicit debug flags") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Paul E. McKenney <paulmck@kernel.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-14mm/hugetlb: fix cow where page writtable in childPeter Xu
When rework early cow of pinned hugetlb pages, we moved huge_ptep_get() upper but overlooked a side effect that the huge_ptep_get() will fetch the pte after wr-protection. After moving it upwards, we need explicit wr-protect of child pte or we will keep the write bit set in the child process, which could cause data corrution where the child can write to the original page directly. This issue can also be exposed by "memfd_test hugetlbfs" kselftest. Link: https://lkml.kernel.org/r/20210503234356.9097-3-peterx@redhat.com Fixes: 4eae4efa2c299 ("hugetlb: do early cow when page pinned on src mm") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-14mm/hugetlb: fix F_SEAL_FUTURE_WRITEPeter Xu
Patch series "mm/hugetlb: Fix issues on file sealing and fork", v2. Hugh reported issue with F_SEAL_FUTURE_WRITE not applied correctly to hugetlbfs, which I can easily verify using the memfd_test program, which seems that the program is hardly run with hugetlbfs pages (as by default shmem). Meanwhile I found another probably even more severe issue on that hugetlb fork won't wr-protect child cow pages, so child can potentially write to parent private pages. Patch 2 addresses that. After this series applied, "memfd_test hugetlbfs" should start to pass. This patch (of 2): F_SEAL_FUTURE_WRITE is missing for hugetlb starting from the first day. There is a test program for that and it fails constantly. $ ./memfd_test hugetlbfs memfd-hugetlb: CREATE memfd-hugetlb: BASIC memfd-hugetlb: SEAL-WRITE memfd-hugetlb: SEAL-FUTURE-WRITE mmap() didn't fail as expected Aborted (core dumped) I think it's probably because no one is really running the hugetlbfs test. Fix it by checking FUTURE_WRITE also in hugetlbfs_file_mmap() as what we do in shmem_mmap(). Generalize a helper for that. Link: https://lkml.kernel.org/r/20210503234356.9097-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210503234356.9097-2-peterx@redhat.com Fixes: ab3948f58ff84 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd") Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: Hugh Dickins <hughd@google.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-15Merge tag 'drm-msm-fixes-2021-05-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes - dsi regression fix - dma-buf pinning fix - displayport fixes - llc fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGuqLZDAEJwUFKb6m+h3kyxgjDEKa3DPA1fHA69vxbXH=g@mail.gmail.com
2021-05-14Merge tag 'trace-v5.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Fix trace_check_vprintf() for %.*s The sanity check of all strings being read from the ring buffer to make sure they are in safe memory space did not account for the %.*s notation having another parameter to process (the length). Add that to the check" * tag 'trace-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Handle %.*s in trace_check_vprintf()
2021-05-15Merge tag 'drm-intel-fixes-2021-05-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.13-rc2: - Fix active callback alignment annotations and subsequent crashes - Retract link training strategy to slow and wide, again - Avoid division by zero on gen2 - Use correct width reads for C0DRB3/C1DRB3 registers - Fix double free in pdp allocation failure path - Fix HDMI 2.1 PCON downstream caps check Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87a6oxu9ao.fsf@intel.com
2021-05-14Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "Fixes and cpucaps.h automatic generation: - Generate cpucaps.h at build time rather than carrying lots of #defines. Merged at -rc1 to avoid some conflicts during the merge window. - Initialise RGSR_EL1.SEED in __cpu_setup() as it may be left as 0 out of reset and the IRG instruction would not function as expected if only the architected pseudorandom number generator is implemented. - Fix potential race condition in __sync_icache_dcache() where the PG_dcache_clean page flag is set before the actual cache maintenance. - Fix header include in BTI kselftests" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache() arm64: tools: Add __ASM_CPUCAPS_H to the endif in cpucaps.h arm64: mte: initialize RGSR_EL1.SEED in __cpu_setup kselftest/arm64: Add missing stddef.h include to BTI tests arm64: Generate cpucaps.h
2021-05-14Merge tag 'f2fs-5.13-rc1-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs fixes from Jaegeuk Kim: "This fixes some critical bugs such as memory leak in compression flows, kernel panic when handling errors, and swapon failure due to newly added condition check" * tag 'f2fs-5.13-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: return EINVAL for hole cases in swap file f2fs: avoid swapon failure by giving a warning first f2fs: compress: fix to assign cc.cluster_idx correctly f2fs: compress: fix race condition of overwrite vs truncate f2fs: compress: fix to free compress page correctly f2fs: support iflag change given the mask f2fs: avoid null pointer access when handling IPU error
2021-05-14Merge tag 'drm-fixes-2021-05-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Not much here, mostly amdgpu fixes, with a couple of radeon, and a cosmetic vc4. Two MAINTAINERS file updates also. amdgpu: - Fixes for flexible array conversions - Fix sysfs attribute init - Harvesting fixes - VCN CG/PG fixes for Picasso radeon: - Fixes for flexible array conversions - Fix for flickering on Oland with multiple 4K displays vc4: - drop unused function" * tag 'drm-fixes-2021-05-14' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: update vcn1.0 Non-DPG suspend sequence drm/amdgpu: set vcn mgcg flag for picasso drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected drm/amdgpu: update the method for harvest IP for specific SKU drm/amdgpu: add judgement when add ip blocks (v2) drm/amd/display: Initialize attribute for hdcp_srm sysfs file drm/amd/pm: Fix out-of-bounds bug drm/radeon/si_dpm: Fix SMU power state load drm/radeon/ni_dpm: Fix booting bug MAINTAINERS: Update address for Emma Anholt MAINTAINERS: Update my e-mail drm/vc4: remove unused function drm/ttm: Do not add non-system domain BO into swap list
2021-05-14arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache()Catalin Marinas
To ensure that instructions are observable in a new mapping, the arm64 set_pte_at() implementation cleans the D-cache and invalidates the I-cache to the PoU. As an optimisation, this is only done on executable mappings and the PG_dcache_clean page flag is set to avoid future cache maintenance on the same page. When two different processes map the same page (e.g. private executable file or shared mapping) there's a potential race on checking and setting PG_dcache_clean via set_pte_at() -> __sync_icache_dcache(). While on the fault paths the page is locked (PG_locked), mprotect() does not take the page lock. The result is that one process may see the PG_dcache_clean flag set but the I/D cache maintenance not yet performed. Avoid test_and_set_bit(PG_dcache_clean) in favour of separate test_bit() and set_bit(). In the rare event of a race, the cache maintenance is done twice. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Steven Price <steven.price@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210514095001.13236-1-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-05-14block/partitions/efi.c: Fix the efi_partition() kernel-doc headerBart Van Assche
Fix the following kernel-doc warning: block/partitions/efi.c:685: warning: wrong kernel-doc identifier on line: * efi_partition(struct parsed_partitions *state) Cc: Alexander Viro <viro@math.psu.edu> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210513171708.8391-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-14blk-mq: Swap two calls in blk_mq_exit_queue()Bart Van Assche
If a tag set is shared across request queues (e.g. SCSI LUNs) then the block layer core keeps track of the number of active request queues in tags->active_queues. blk_mq_tag_busy() and blk_mq_tag_idle() update that atomic counter if the hctx flag BLK_MQ_F_TAG_QUEUE_SHARED is set. Make sure that blk_mq_exit_queue() calls blk_mq_tag_idle() before that flag is cleared by blk_mq_del_queue_tag_set(). Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Fixes: 0d2602ca30e4 ("blk-mq: improve support for shared tags maps") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210513171529.7977-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-14blk-mq: plug request for shared sbitmapMing Lei
In case of shared sbitmap, request won't be held in plug list any more sine commit 32bc15afed04 ("blk-mq: Facilitate a shared sbitmap per tagset"), this way makes request merge from flush plug list & batching submission not possible, so cause performance regression. Yanhui reports performance regression when running sequential IO test(libaio, 16 jobs, 8 depth for each job) in VM, and the VM disk is emulated with image stored on xfs/megaraid_sas. Fix the issue by recovering original behavior to allow to hold request in plug list. Cc: Yanhui Ma <yama@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: kashyap.desai@broadcom.com Fixes: 32bc15afed04 ("blk-mq: Facilitate a shared sbitmap per tagset") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210514022052.1047665-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-14xen/swiotlb: check if the swiotlb has already been initializedStefano Stabellini
xen_swiotlb_init calls swiotlb_late_init_with_tbl, which fails with -ENOMEM if the swiotlb has already been initialized. Add an explicit check io_tlb_default_mem != NULL at the beginning of xen_swiotlb_init. If the swiotlb is already initialized print a warning and return -EEXIST. On x86, the error propagates. On ARM, we don't actually need a special swiotlb buffer (yet), any buffer would do. So ignore the error and continue. CC: boris.ostrovsky@oracle.com CC: jgross@suse.com Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrvsky@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210512201823.1963-3-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-05-14arm64: do not set SWIOTLB_NO_FORCE when swiotlb is requiredChristoph Hellwig
Although SWIOTLB_NO_FORCE is meant to allow later calls to swiotlb_init, today dma_direct_map_page returns error if SWIOTLB_NO_FORCE. For now, without a larger overhaul of SWIOTLB_NO_FORCE, the best we can do is to avoid setting SWIOTLB_NO_FORCE in mem_init when we know that it is going to be required later (e.g. Xen requires it). CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: catalin.marinas@arm.com CC: will@kernel.org CC: linux-arm-kernel@lists.infradead.org Fixes: 2726bf3ff252 ("swiotlb: Make SWIOTLB_NO_FORCE perform no allocation") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20210512201823.1963-2-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-05-14xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.hStefano Stabellini
Move xen_swiotlb_detect to a static inline function to make it available to !CONFIG_XEN builds. CC: boris.ostrovsky@oracle.com CC: jgross@suse.com Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210512201823.1963-1-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-05-14clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86Vitaly Kuznetsov
Mohammed reports (https://bugzilla.kernel.org/show_bug.cgi?id=213029) the commit e4ab4658f1cf ("clocksource/drivers/hyper-v: Handle vDSO differences inline") broke vDSO on x86. The problem appears to be that VDSO_CLOCKMODE_HVCLOCK is an enum value in 'enum vdso_clock_mode' and '#ifdef VDSO_CLOCKMODE_HVCLOCK' branch evaluates to false (it is not a define). Use a dedicated HAVE_VDSO_CLOCKMODE_HVCLOCK define instead. Fixes: e4ab4658f1cf ("clocksource/drivers/hyper-v: Handle vDSO differences inline") Reported-by: Mohammed Gamal <mgamal@redhat.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20210513073246.1715070-1-vkuznets@redhat.com
2021-05-14io_uring: increase max number of reg buffersPavel Begunkov
Since recent changes instead of storing a large array of struct io_mapped_ubuf, we store pointers to them, that is 4 times slimmer and we should not to so worry about restricting max number of registererd buffer slots, increase the limit 4 times. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/d3dee1da37f46da416aa96a16bf9e5094e10584d.1620990371.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-14io_uring: further remove sqpoll limits on opcodesPavel Begunkov
There are three types of requests that left disabled for sqpoll, namely epoll ctx, statx, and resources update. Since SQPOLL task is now closely mimics a userspace thread, remove the restrictions. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/909b52d70c45636d8d7897582474ea5aab5eed34.1620990306.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-14io_uring: fix ltout double free on completion racePavel Begunkov
Always remove linked timeout on io_link_timeout_fn() from the master request link list, otherwise we may get use-after-free when first io_link_timeout_fn() puts linked timeout in the fail path, and then will be found and put on master's free. Cc: stable@vger.kernel.org # 5.10+ Fixes: 90cd7e424969d ("io_uring: track link timeout's master explicitly") Reported-and-tested-by: syzbot+5a864149dd970b546223@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/69c46bf6ce37fec4fdcd98f0882e18eb07ce693a.1620990121.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-14powerpc/64e/interrupt: Fix nvgprs being clobberedNicholas Piggin
Some interrupt handlers have an "extra" that saves 1 or 2 registers (r14, r15) in the paca save area and makes them available to use by the handler. The change to always save nvgprs in exception handlers lead to some interrupt handlers saving those scratch r14 / r15 registers into the interrupt frame's GPR saves, which get restored on interrupt exit. Fix this by always reloading those scratch registers from paca before the EXCEPTION_COMMON that saves nvgprs. Fixes: 4228b2c3d20e ("powerpc/64e/interrupt: always save nvgprs on interrupt") Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210514044008.1955783-1-npiggin@gmail.com
2021-05-14powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabledNicholas Piggin
scv support introduced the notion of code that implicitly soft-masks irqs due to the instruction addresses. This is required because scv enters the kernel with MSR[EE]=1. If a NMI (including soft-NMI) interrupt hits when we are implicitly soft-masked then its regs->softe does not reflect this because it is derived from the explicit soft mask state (paca->irq_soft_mask). This makes arch_irq_disabled_regs(regs) return false. This can trigger a warning in the soft-NMI watchdog code (shown below). Fix it by having NMI interrupts set regs->softe to disabled in case of interrupting an implicit soft-masked region. ------------[ cut here ]------------ WARNING: CPU: 41 PID: 1103 at arch/powerpc/kernel/watchdog.c:259 soft_nmi_interrupt+0x3e4/0x5f0 CPU: 41 PID: 1103 Comm: (spawn) Not tainted NIP: c000000000039534 LR: c000000000039234 CTR: c000000000009a00 REGS: c000007fffbcf940 TRAP: 0700 Not tainted MSR: 9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR: 22042482 XER: 200400ad CFAR: c000000000039260 IRQMASK: 3 GPR00: c000000000039204 c000007fffbcfbe0 c000000001d6c300 0000000000000003 GPR04: 00007ffffa45d078 0000000000000000 0000000000000008 0000000000000020 GPR08: 0000007ffd4e0000 0000000000000000 c000007ffffceb00 7265677368657265 GPR12: 9000000000009033 c000007ffffceb00 00000f7075bf4480 000000000000002a GPR16: 00000f705745a528 00007ffffa45ddd8 00000f70574d0008 0000000000000000 GPR20: 00000f7075c58d70 00000f7057459c38 0000000000000001 0000000000000040 GPR24: 0000000000000000 0000000000000029 c000000001dae058 0000000000000029 GPR28: 0000000000000000 0000000000000800 0000000000000009 c000007fffbcfd60 NIP [c000000000039534] soft_nmi_interrupt+0x3e4/0x5f0 LR [c000000000039234] soft_nmi_interrupt+0xe4/0x5f0 Call Trace: [c000007fffbcfbe0] [c000000000039204] soft_nmi_interrupt+0xb4/0x5f0 (unreliable) [c000007fffbcfcf0] [c00000000000c0e8] soft_nmi_common+0x138/0x1c4 --- interrupt: 900 at end_real_trampolines+0x0/0x1000 NIP: c000000000003000 LR: 00007ca426adb03c CTR: 900000000280f033 REGS: c000007fffbcfd60 TRAP: 0900 MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44042482 XER: 200400ad CFAR: 00007ca426946020 IRQMASK: 0 GPR00: 00000000000000ad 00007ffffa45d050 00007ca426b07f00 0000000000000035 GPR04: 00007ffffa45d078 0000000000000000 0000000000000008 0000000000000020 GPR08: 0000000000000000 0000000000100000 0000000010000000 00007ffffa45d110 GPR12: 0000000000000001 00007ca426d4e680 00000f7075bf4480 000000000000002a GPR16: 00000f705745a528 00007ffffa45ddd8 00000f70574d0008 0000000000000000 GPR20: 00000f7075c58d70 00000f7057459c38 0000000000000001 0000000000000040 GPR24: 0000000000000000 00000f7057473f68 0000000000000003 000000000000041b GPR28: 00007ffffa45d4c4 0000000000000035 0000000000000000 00000f7057473f68 NIP [c000000000003000] end_real_trampolines+0x0/0x1000 LR [00007ca426adb03c] 0x7ca426adb03c --- interrupt: 900 Instruction dump: 60000000 60000000 60420000 38600001 482b3ae5 60000000 e93f0138 a36d0008 7daa6b78 71290001 7f7907b4 4082fd34 <0fe00000> 4bfffd2c 60420000 ea6100a8 ---[ end trace dc75f67d819779da ]--- Fixes: 118178e62e2e ("powerpc: move NMI entry/exit code into wrapper") Reported-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210503111708.758261-1-npiggin@gmail.com
2021-05-14powerpc/64s: Fix stf mitigation patching w/strict RWX & hashMichael Ellerman
The stf entry barrier fallback is unsafe to execute in a semi-patched state, which can happen when enabling/disabling the mitigation with strict kernel RWX enabled and using the hash MMU. See the previous commit for more details. Fix it by changing the order in which we patch the instructions. Note the stf barrier fallback is only used on Power6 or earlier. Fixes: bd573a81312f ("powerpc/mm/64s: Allow STRICT_KERNEL_RWX again") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210513140800.1391706-2-mpe@ellerman.id.au
2021-05-14powerpc/64s: Fix entry flush patching w/strict RWX & hashMichael Ellerman
The entry flush mitigation can be enabled/disabled at runtime. When this happens it results in the kernel patching its own instructions to enable/disable the mitigation sequence. With strict kernel RWX enabled instruction patching happens via a secondary mapping of the kernel text, so that we don't have to make the primary mapping writable. With the hash MMU this leads to a hash fault, which causes us to execute the exception entry which contains the entry flush mitigation. This means we end up executing the entry flush in a semi-patched state, ie. after we have patched the first instruction but before we patch the second or third instruction of the sequence. On machines with updated firmware the entry flush is a series of special nops, and it's safe to to execute in a semi-patched state. However when using the fallback flush the sequence is mflr/branch/mtlr, and so it's not safe to execute if we have patched out the mflr but not the other two instructions. Doing so leads to us corrputing LR, leading to an oops, for example: # echo 0 > /sys/kernel/debug/powerpc/entry_flush kernel tried to execute exec-protected page (c000000002971000) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0xc000000002971000 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 0 PID: 2215 Comm: bash Not tainted 5.13.0-rc1-00010-gda3bb206c9ce #1 NIP: c000000002971000 LR: c000000002971000 CTR: c000000000120c40 REGS: c000000013243840 TRAP: 0400 Not tainted (5.13.0-rc1-00010-gda3bb206c9ce) MSR: 8000000010009033 <SF,EE,ME,IR,DR,RI,LE> CR: 48428482 XER: 00000000 ... NIP 0xc000000002971000 LR 0xc000000002971000 Call Trace: do_patch_instruction+0xc4/0x340 (unreliable) do_entry_flush_fixups+0x100/0x3b0 entry_flush_set+0x50/0xe0 simple_attr_write+0x160/0x1a0 full_proxy_write+0x8c/0x110 vfs_write+0xf0/0x340 ksys_write+0x84/0x140 system_call_exception+0x164/0x2d0 system_call_common+0xec/0x278 The simplest fix is to change the order in which we patch the instructions, so that the sequence is always safe to execute. For the non-fallback flushes it doesn't matter what order we patch in. Fixes: bd573a81312f ("powerpc/mm/64s: Allow STRICT_KERNEL_RWX again") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210513140800.1391706-1-mpe@ellerman.id.au
2021-05-14powerpc/64s: Fix crashes when toggling entry flush barrierMichael Ellerman
The entry flush mitigation can be enabled/disabled at runtime via a debugfs file (entry_flush), which causes the kernel to patch itself to enable/disable the relevant mitigations. However depending on which mitigation we're using, it may not be safe to do that patching while other CPUs are active. For example the following crash: sleeper[15639]: segfault (11) at c000000000004c20 nip c000000000004c20 lr c000000000004c20 Shows that we returned to userspace with a corrupted LR that points into the kernel, due to executing the partially patched call to the fallback entry flush (ie. we missed the LR restore). Fix it by doing the patching under stop machine. The CPUs that aren't doing the patching will be spinning in the core of the stop machine logic. That is currently sufficient for our purposes, because none of the patching we do is to that code or anywhere in the vicinity. Fixes: f79643787e0a ("powerpc/64s: flush L1D on kernel entry") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210506044959.1298123-2-mpe@ellerman.id.au
2021-05-14powerpc/64s: Fix crashes when toggling stf barrierMichael Ellerman
The STF (store-to-load forwarding) barrier mitigation can be enabled/disabled at runtime via a debugfs file (stf_barrier), which causes the kernel to patch itself to enable/disable the relevant mitigations. However depending on which mitigation we're using, it may not be safe to do that patching while other CPUs are active. For example the following crash: User access of kernel address (c00000003fff5af0) - exploit attempt? (uid: 0) segfault (11) at c00000003fff5af0 nip 7fff8ad12198 lr 7fff8ad121f8 code 1 code: 40820128 e93c00d0 e9290058 7c292840 40810058 38600000 4bfd9a81 e8410018 code: 2c030006 41810154 3860ffb6 e9210098 <e94d8ff0> 7d295279 39400000 40820a3c Shows that we returned to userspace without restoring the user r13 value, due to executing the partially patched STF exit code. Fix it by doing the patching under stop machine. The CPUs that aren't doing the patching will be spinning in the core of the stop machine logic. That is currently sufficient for our purposes, because none of the patching we do is to that code or anywhere in the vicinity. Fixes: a048a07d7f45 ("powerpc/64s: Add support for a store forwarding barrier at kernel entry/exit") Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210506044959.1298123-1-mpe@ellerman.id.au
2021-05-14Merge tag 'amd-drm-fixes-5.13-2021-05-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.13-2021-05-13: amdgpu: - Fixes for flexible array conversions - Fix sysfs attribute init - Harvesting fixes - VCN CG/PG fixes for Picasso radeon: - Fixes for flexible array conversions - Fix for flickering on Oland with multiple 4K displays Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210513163228.3963-1-alexander.deucher@amd.com
2021-05-14Merge tag 'drm-misc-fixes-2021-05-13' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Remove an unused function and a MAINTAINERS update. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210513133617.xq77wwrehpuh7yn2@hendrix
2021-05-13Merge tag 'pm-5.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These close a coverage gap in the intel_pstate driver and fix runtime PM child count imbalance related to interactions with system-wide suspend. Specifics: - Make intel_pstate work as expected on systems where the platform firmware enables HWP even though the HWP EPP support is not advertised (Rafael Wysocki). - Fix possible runtime PM child count imbalance that may occur if other runtime PM functions are called after invoking pm_runtime_force_suspend() and before pm_runtime_force_resume() is called (Tony Lindgren)" * tag 'pm-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: runtime: Fix unpaired parent child_count for force_resume cpufreq: intel_pstate: Use HWP if enabled by platform firmware
2021-05-13Merge tag 'acpi-5.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert an unnecessary revert of an ACPI power management commit, add a missing device ID to one of the lists and fix a possible memory leak in an error path. Specifics: - Revert a revert of a recent ACPI power management change that does not need to be reverted after all (Rafael Wysocki). - Add missing fan device ID to the list of device IDs for which the devices should not be put into the ACPI PM domain (Sumeet Pawnikar). - Fix possible memory leak in an error path in the ACPI device enumeration code (Christophe JAILLET)" * tag 'acpi-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Add ACPI ID of Alder Lake Fan ACPI: scan: Fix a memory leak in an error handling path Revert "Revert "ACPI: scan: Turn off unused power resources during initialization""
2021-05-13Merge branch 'acpi-pm'Rafael J. Wysocki
* acpi-pm: ACPI: PM: Add ACPI ID of Alder Lake Fan Revert "Revert "ACPI: scan: Turn off unused power resources during initialization""
2021-05-13Merge branch 'pm-core'Rafael J. Wysocki
* pm-core: PM: runtime: Fix unpaired parent child_count for force_resume
2021-05-13tracing: Handle %.*s in trace_check_vprintf()Steven Rostedt (VMware)
If a trace event uses the %*.s notation, the trace_check_vprintf() will fail and will warn about a bad processing of strings, because it does not take into account the length field when processing the star (*) part. Have it handle this case as well. Link: https://lore.kernel.org/linux-nfs/238C0E2D-C2A4-4578-ADD2-C565B3B99842@oracle.com/ Reported-by: Chuck Lever III <chuck.lever@oracle.com> Fixes: 9a6944fee68e2 ("tracing: Add a verifier to check string pointers for trace events") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-05-13Merge branch 'resizex' (patches from Maciej)Linus Torvalds
Merge VT_RESIZEX fixes from Maciej Rozycki: "I got to the bottom of the issue with VT_RESIZEX recently discussed and came up with this small patch series, fixing an additional issue that I originally thought might be broken VGA hardware emulation with my laptop, which however turned out to be intertwined with the original problem and also a regression introduced somewhat later. The fix for that because the first patch, and then to make backporting feasible I had to put a revert of the offending change from last September next, followed by a proper fix for the framebuffer issue that change had tried to address. See individual change descriptions for details. These have been verified with true VGA hardware (a Trident TVGA8900 ISA video adapter) using various combinations of `svgatextmode' and `setfont' command invocations to change both the VT size and the font size, and also switching between the text console and X11, both by starting/stopping the X server and by switching between VTs. All this to ensure bringing the behaviour of VGA text console back to correct operation as it used to be with Linux 2.6.18" * emailed patches from Maciej W. Rozycki <macro@orcam.me.uk>: vt: Fix character height handling with VT_RESIZEX vt_ioctl: Revert VT_RESIZEX parameter handling removal vgacon: Record video mode changes with VT_RESIZEX
2021-05-13vt: Fix character height handling with VT_RESIZEXMaciej W. Rozycki
Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-13vt_ioctl: Revert VT_RESIZEX parameter handling removalMaciej W. Rozycki
Revert the removal of code handling extra VT_RESIZEX ioctl's parameters beyond those that VT_RESIZE supports, fixing a functional regression causing `svgatextmode' not to resize the VT anymore. As a consequence of the reverted change when the video adapter is reprogrammed from the original say 80x25 text mode using a 9x16 character cell (720x400 pixel resolution) to say 80x37 text mode and the same character cell (720x592 pixel resolution), the VT geometry does not get updated and only upper two thirds of the screen are used for the VT, and the lower part remains blank. The proportions change according to text mode geometries chosen. Revert the change verbatim then, bringing back previous VT resizing. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-13vgacon: Record video mode changes with VT_RESIZEXMaciej W. Rozycki
Fix an issue with VGA console font size changes made after the initial video text mode has been changed with a user tool like `svgatextmode' calling the VT_RESIZEX ioctl. As it stands in that case the original screen geometry continues being used to validate further VT resizing. Consequently when the video adapter is firstly reprogrammed from the original say 80x25 text mode using a 9x16 character cell (720x400 pixel resolution) to say 80x37 text mode and the same character cell (720x592 pixel resolution), and secondly the CRTC character cell updated to 9x8 (by loading a suitable font with the KD_FONT_OP_SET request of the KDFONTOP ioctl), the VT geometry does not get further updated from 80x37 and only upper half of the screen is used for the VT, with the lower half showing rubbish corresponding to whatever happens to be there in the video memory that maps to that part of the screen. Of course the proportions change according to text mode geometries and font sizes chosen. Address the problem then, by updating the text mode geometry defaults rather than checking against them whenever the VT is resized via a user ioctl. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: e400b6ec4ede ("vt/vgacon: Check if screen resize request comes from userspace") Cc: stable@vger.kernel.org # v2.6.24+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-13Merge tag 'nvme-5.13-2021-05-13' of git://git.infradead.org/nvme into block-5.13Jens Axboe
Pull NVMe fixes from Christoph: "nvme fix for Linux 5.13 - correct the check for using the inline bio in nvmet (Chaitanya Kulkarni) - demote unsupported command warnings (Chaitanya Kulkarni) - fix corruption due to double initializing ANA state (me, Hou Pu) - reset ns->file when open fails (Daniel Wagner) - fix a NULL deref when SEND is completed with error in nvmet-rdma (Michal Kalderon)" * tag 'nvme-5.13-2021-05-13' of git://git.infradead.org/nvme: nvmet: use new ana_log_size instead the old one nvmet: seset ns->file when open fails nvmet: demote fabrics cmd parse err msg to debug nvmet: use helper to remove the duplicate code nvmet: demote discovery cmd parse err msg to debug nvmet-rdma: Fix NULL deref when SEND is completed with error nvmet: fix inline bio check for passthru nvmet: fix inline bio check for bdev-ns nvme-multipath: fix double initialization of ANA state
2021-05-13Merge tag 'hwmon-for-v5.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix bugs/regressions in adm9240, ltc2992, pmbus/fsp-3y, and occ drivers, plus a minor cleanup in the corsair-psu driver" * tag 'hwmon-for-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (adm9240) Fix writes into inX_max attributes hwmon: (ltc2992) Put fwnode in error case during ->probe() hwmon: (pmbus/fsp-3y) Fix FSP-3Y YH-5151E non-compliant vout encoding hwmon: (occ) Fix poll rate limiting hwmon: (corsair-psu) Remove unneeded semicolons
2021-05-13arm64: tools: Add __ASM_CPUCAPS_H to the endif in cpucaps.hMark Brown
Anshuman suggested this. Suggested-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210513151819.12526-1-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-05-13drm/amdgpu: update vcn1.0 Non-DPG suspend sequenceSathishkumar S
update suspend register settings in Non-DPG mode. Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-13drm/amdgpu: set vcn mgcg flag for picassoSathishkumar S
enable vcn mgcg flag for picasso. Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-13drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors ↵Kai-Heng Feng
are connected Screen flickers rapidly when two 4K 60Hz monitors are in use. This issue doesn't happen when one monitor is 4K 60Hz (pixelclock 594MHz) and another one is 4K 30Hz (pixelclock 297MHz). The issue is gone after setting "power_dpm_force_performance_level" to "high". Following the indication, we found that the issue occurs when sclk is too low. So resolve the issue by disabling sclk switching when there are two monitors requires high pixelclock (> 297MHz). v2: - Only apply the fix to Oland. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-05-13drm/amdgpu: update the method for harvest IP for specific SKULikun Gao
Update the method of disabling VCN IP for specific SKU for navi1x ASIC, it will judge whether should add the related IP at the function of amdgpu_device_ip_block_add(). Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-13drm/amdgpu: add judgement when add ip blocks (v2)Likun GAO
Judgement whether to add an sw ip according to the harvest info. v2: fix indentation (Alex) Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-13drm/amd/display: Initialize attribute for hdcp_srm sysfs fileDavid Ward
It is stored in dynamically allocated memory, so sysfs_bin_attr_init() must be called to initialize it. (Note: "initialization" only sets the .attr.key member in this struct; it does not change the value of any other members.) Otherwise, when CONFIG_DEBUG_LOCK_ALLOC=y this message appears during boot: BUG: key ffff9248900cd148 has not been registered! Fixes: 9037246bb2da ("drm/amd/display: Add sysfs interface for set/get srm") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1586 Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: David Ward <david.ward@gatech.edu> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-05-13drm/amd/pm: Fix out-of-bounds bugGustavo A. R. Silva
Create new structure SISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels and ACPIState.levels are never actually used as flexible arrays. Those arrays can be used as simple objects of type SISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead. Currently, the code fails because flexible array _levels_ in struct SISLANDS_SMC_SWSTATE doesn't allow for code that accesses the first element of initialState.levels and ACPIState.levels arrays: drivers/gpu/drm/amd/pm/powerplay/si_dpm.c: 4820: table->initialState.levels[0].mclk.vDLL_CNTL = 4821: cpu_to_be32(si_pi->clock_registers.dll_cntl); ... 5021: table->ACPIState.levels[0].mclk.vDLL_CNTL = 5022: cpu_to_be32(dll_cntl); because such element cannot be accessed without previously allocating enough dynamic memory for it to exist (which never actually happens). So, there is an out-of-bounds bug in this case. That's why struct SISLANDS_SMC_SWSTATE should only be used as type for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is created as type for objects initialState, ACPIState and ULVState. Also, with the change from one-element array to flexible-array member in commit 0e1aa13ca3ff ("drm/amd/pm: Replace one-element array with flexible-array in struct SISLANDS_SMC_SWSTATE"), the size of dpmLevels in struct SISLANDS_SMC_STATETABLE should be fixed to be SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1. Fixes: 0e1aa13ca3ff ("drm/amd/pm: Replace one-element array with flexible-array in struct SISLANDS_SMC_SWSTATE") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-13drm/radeon/si_dpm: Fix SMU power state loadGustavo A. R. Silva
Create new structure SISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels and ACPIState.levels are never actually used as flexible arrays. Those arrays can be used as simple objects of type SISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead. Currently, the code fails because flexible array _levels_ in struct SISLANDS_SMC_SWSTATE doesn't allow for code that access the first element of initialState.levels and ACPIState.levels arrays: 4353 table->initialState.levels[0].mclk.vDLL_CNTL = 4354 cpu_to_be32(si_pi->clock_registers.dll_cntl); ... 4555 table->ACPIState.levels[0].mclk.vDLL_CNTL = 4556 cpu_to_be32(dll_cntl); because such element cannot exist without previously allocating any dynamic memory for it (which never actually happens). That's why struct SISLANDS_SMC_SWSTATE should only be used as type for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is created as type for objects initialState, ACPIState and ULVState. Also, with the change from one-element array to flexible-array member in commit 96e27e8d919e ("drm/radeon/si_dpm: Replace one-element array with flexible-array in struct SISLANDS_SMC_SWSTATE"), the size of dpmLevels in struct SISLANDS_SMC_STATETABLE should be fixed to be SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of SISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1583 Fixes: 96e27e8d919e ("drm/radeon/si_dpm: Replace one-element array with flexible-array in struct SISLANDS_SMC_SWSTATE") Cc: stable@vger.kernel.org Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-13drm/radeon/ni_dpm: Fix booting bugGustavo A. R. Silva
Create new structure NISLANDS_SMC_SWSTATE_SINGLE, as initialState.levels and ACPIState.levels are never actually used as flexible arrays. Those arrays can be used as simple objects of type NISLANDS_SMC_HW_PERFORMANCE_LEVEL, instead. Currently, the code fails because flexible array _levels_ in struct NISLANDS_SMC_SWSTATE doesn't allow for code that access the first element of initialState.levels and ACPIState.levels arrays: drivers/gpu/drm/radeon/ni_dpm.c: 1690 table->initialState.levels[0].mclk.vMPLL_AD_FUNC_CNTL = 1691 cpu_to_be32(ni_pi->clock_registers.mpll_ad_func_cntl); ... 1903: table->ACPIState.levels[0].mclk.vMPLL_AD_FUNC_CNTL = cpu_to_be32(mpll_ad_func_cntl); 1904: table->ACPIState.levels[0].mclk.vMPLL_AD_FUNC_CNTL_2 = cpu_to_be32(mpll_ad_func_cntl_2); because such element cannot exist without previously allocating any dynamic memory for it (which never actually happens). That's why struct NISLANDS_SMC_SWSTATE should only be used as type for object driverState and new struct SISLANDS_SMC_SWSTATE_SINGLE is created as type for objects initialState, ACPIState and ULVState. Also, with the change from one-element array to flexible-array member in commit 434fb1e7444a ("drm/radeon/nislands_smc.h: Replace one-element array with flexible-array member in struct NISLANDS_SMC_SWSTATE"), the size of dpmLevels in struct NISLANDS_SMC_STATETABLE should be fixed to be NISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE instead of NISLANDS_MAX_SMC_PERFORMANCE_LEVELS_PER_SWSTATE - 1. Bug: https://lore.kernel.org/dri-devel/3eedbe78-1fbd-4763-a7f3-ac5665e76a4a@xenosoft.de/ Fixes: 434fb1e7444a ("drm/radeon/nislands_smc.h: Replace one-element array with flexible-array member in struct NISLANDS_SMC_SWSTATE") Cc: stable@vger.kernel.org Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Link: https://lore.kernel.org/dri-devel/9bb5fcbd-daf5-1669-b3e7-b8624b3c36f9@xenosoft.de/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-13nvmet: use new ana_log_size instead the old oneHou Pu
The new ana_log_size should be used instead of the old one. Or kernel NULL pointer dereference will happen like below: [ 38.957849][ T69] BUG: kernel NULL pointer dereference, address: 000000000000003c [ 38.975550][ T69] #PF: supervisor write access in kernel mode [ 38.975955][ T69] #PF: error_code(0x0002) - not-present page [ 38.976905][ T69] PGD 0 P4D 0 [ 38.979388][ T69] Oops: 0002 [#1] SMP NOPTI [ 38.980488][ T69] CPU: 0 PID: 69 Comm: kworker/0:2 Not tainted 5.12.0+ #54 [ 38.981254][ T69] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 38.982502][ T69] Workqueue: events nvme_loop_execute_work [ 38.985219][ T69] RIP: 0010:memcpy_orig+0x68/0x10f [ 38.986203][ T69] Code: 83 c2 20 eb 44 48 01 d6 48 01 d7 48 83 ea 20 0f 1f 00 48 83 ea 20 4c 8b 46 f8 4c 8b 4e f0 4c 8b 56 e8 4c 8b 5e e0 48 8d 76 e0 <4c> 89 47 f8 4c 89 4f f0 4c 89 57 e8 4c 89 5f e0 48 8d 7f e0 73 d2 [ 38.987677][ T69] RSP: 0018:ffffc900001b7d48 EFLAGS: 00000287 [ 38.987996][ T69] RAX: 0000000000000020 RBX: 0000000000000024 RCX: 0000000000000010 [ 38.988327][ T69] RDX: ffffffffffffffe4 RSI: ffff8881084bc004 RDI: 0000000000000044 [ 38.988620][ T69] RBP: 0000000000000024 R08: 0000000100000000 R09: 0000000000000000 [ 38.988991][ T69] R10: 0000000100000000 R11: 0000000000000001 R12: 0000000000000024 [ 38.989289][ T69] R13: ffff8881084bc000 R14: 0000000000000000 R15: 0000000000000024 [ 38.989845][ T69] FS: 0000000000000000(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 [ 38.990234][ T69] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 38.990490][ T69] CR2: 000000000000003c CR3: 00000001085b2000 CR4: 00000000000006f0 [ 38.991105][ T69] Call Trace: [ 38.994157][ T69] sg_copy_buffer+0xb8/0xf0 [ 38.995357][ T69] nvmet_copy_to_sgl+0x48/0x6d [ 38.995565][ T69] nvmet_execute_get_log_page_ana+0xd4/0x1cb [ 38.995792][ T69] nvmet_execute_get_log_page+0xc9/0x146 [ 38.995992][ T69] nvme_loop_execute_work+0x3e/0x44 [ 38.996181][ T69] process_one_work+0x1c3/0x3c0 [ 38.996393][ T69] worker_thread+0x44/0x3d0 [ 38.996600][ T69] ? cancel_delayed_work+0x90/0x90 [ 38.996804][ T69] kthread+0xf7/0x130 [ 38.996961][ T69] ? kthread_create_worker_on_cpu+0x70/0x70 [ 38.997171][ T69] ret_from_fork+0x22/0x30 [ 38.997705][ T69] Modules linked in: [ 38.998741][ T69] CR2: 000000000000003c [ 39.000104][ T69] ---[ end trace e719927b609d0fa0 ]--- Fixes: 5e1f689913a4 ("nvme-multipath: fix double initialization of ANA state") Signed-off-by: Hou Pu <houpu.main@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 13:10:37 +0000