summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/PCI/pci-error-recovery.rst8
-rw-r--r--Documentation/PCI/pci.rst9
-rw-r--r--Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml8
-rw-r--r--Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt12
-rw-r--r--Documentation/devicetree/bindings/pci/pci.txt4
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie.txt15
-rw-r--r--Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml94
-rw-r--r--Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml113
-rw-r--r--Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml99
9 files changed, 330 insertions, 32 deletions
diff --git a/Documentation/PCI/pci-error-recovery.rst b/Documentation/PCI/pci-error-recovery.rst
index 9fa49a6ece85..84ceebb08cac 100644
--- a/Documentation/PCI/pci-error-recovery.rst
+++ b/Documentation/PCI/pci-error-recovery.rst
@@ -79,7 +79,7 @@ This structure has the form::
struct pci_error_handlers
{
- int (*error_detected)(struct pci_dev *dev, enum pci_channel_state);
+ int (*error_detected)(struct pci_dev *dev, pci_channel_state_t);
int (*mmio_enabled)(struct pci_dev *dev);
int (*slot_reset)(struct pci_dev *dev);
void (*resume)(struct pci_dev *dev);
@@ -87,11 +87,11 @@ This structure has the form::
The possible channel states are::
- enum pci_channel_state {
+ typedef enum {
pci_channel_io_normal, /* I/O channel is in normal state */
pci_channel_io_frozen, /* I/O to channel is blocked */
pci_channel_io_perm_failure, /* PCI card is dead */
- };
+ } pci_channel_state_t;
Possible return values are::
@@ -348,7 +348,7 @@ STEP 6: Permanent Failure
-------------------------
A "permanent failure" has occurred, and the platform cannot recover
the device. The platform will call error_detected() with a
-pci_channel_state value of pci_channel_io_perm_failure.
+pci_channel_state_t value of pci_channel_io_perm_failure.
The device driver should, at this point, assume the worst. It should
cancel all pending I/O, refuse all new I/O, returning -EIO to
diff --git a/Documentation/PCI/pci.rst b/Documentation/PCI/pci.rst
index c35b187d5479..814b40f8360b 100644
--- a/Documentation/PCI/pci.rst
+++ b/Documentation/PCI/pci.rst
@@ -17,7 +17,7 @@ PCI device drivers.
A more complete resource is the third edition of "Linux Device Drivers"
by Jonathan Corbet, Alessandro Rubini, and Greg Kroah-Hartman.
LDD3 is available for free (under Creative Commons License) from:
-http://lwn.net/Kernel/LDD3/.
+https://lwn.net/Kernel/LDD3/.
However, keep in mind that all documents are subject to "bit rot".
Refer to the source code if things are not working as described here.
@@ -214,7 +214,7 @@ the PCI device by calling pci_enable_device(). This will:
problem and unlikely to get fixed soon.
This has been discussed before but not changed as of 2.6.19:
- http://lkml.org/lkml/2006/3/2/194
+ https://lore.kernel.org/r/20060302180025.GC28895@flint.arm.linux.org.uk/
pci_set_master() will enable DMA by setting the bus master bit
@@ -514,9 +514,8 @@ your driver if they're helpful, or just use plain hex constants.
The device IDs are arbitrary hex numbers (vendor controlled) and normally used
only in a single location, the pci_device_id table.
-Please DO submit new vendor/device IDs to http://pci-ids.ucw.cz/.
-There are mirrors of the pci.ids file at http://pciids.sourceforge.net/
-and https://github.com/pciutils/pciids.
+Please DO submit new vendor/device IDs to https://pci-ids.ucw.cz/.
+There's a mirror of the pci.ids file at https://github.com/pciutils/pciids.
Obsolete functions
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
index 84a8f095d031..6d67067843bf 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
@@ -18,13 +18,12 @@ properties:
const: cdns,cdns-pcie-host
reg:
- maxItems: 3
+ maxItems: 2
reg-names:
items:
- const: reg
- const: cfg
- - const: mem
msi-parent: true
@@ -49,9 +48,8 @@ examples:
device-id = <0x0200>;
reg = <0x0 0xfb000000 0x0 0x01000000>,
- <0x0 0x41000000 0x0 0x00001000>,
- <0x0 0x40000000 0x0 0x04000000>;
- reg-names = "reg", "cfg", "mem";
+ <0x0 0x41000000 0x0 0x00001000>;
+ reg-names = "reg", "cfg";
ranges = <0x02000000 0x0 0x42000000 0x0 0x42000000 0x0 0x1000000>,
<0x01000000 0x0 0x43000000 0x0 0x43000000 0x0 0x0010000>;
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
index 7939bca47861..d099f3476ccc 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -112,28 +112,16 @@ Power supplies for Tegra124:
- Required:
- avddio-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
- dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
- - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
- supply 1.05 V.
- hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
Must supply 3.3 V.
- - hvdd-pex-pll-e-supply: High-voltage supply for PLLE (shared with USB3).
- Must supply 3.3 V.
- vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
supply 2.8-3.3 V.
- - avdd-pll-erefe-supply: Power supply for PLLE (shared with USB3). Must
- supply 1.05 V.
Power supplies for Tegra210:
- Required:
- - avdd-pll-uerefe-supply: Power supply for PLLE (shared with USB3). Must
- supply 1.05 V.
- hvddio-pex-supply: High-voltage supply for PCIe I/O and PCIe output
clocks. Must supply 1.8 V.
- dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
- - dvdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
- supply 1.05 V.
- - hvdd-pex-pll-e-supply: High-voltage supply for PLLE (shared with USB3).
- Must supply 3.3 V.
- vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
supply 1.8 V.
diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt
index 29bcbd88f457..6a8f2874a24d 100644
--- a/Documentation/devicetree/bindings/pci/pci.txt
+++ b/Documentation/devicetree/bindings/pci/pci.txt
@@ -1,12 +1,12 @@
PCI bus bridges have standardized Device Tree bindings:
PCI Bus Binding to: IEEE Std 1275-1994
-http://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf
+https://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf
And for the interrupt mapping part:
Open Firmware Recommended Practice: Interrupt Mapping
-http://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf
+https://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf
Additionally to the properties specified in the above standards a host bridge
driver implementation may support the following properties:
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 981b4de12807..02bc81bb8b2d 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -5,6 +5,7 @@
Value type: <stringlist>
Definition: Value should contain
- "qcom,pcie-ipq8064" for ipq8064
+ - "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065
- "qcom,pcie-apq8064" for apq8064
- "qcom,pcie-apq8084" for apq8084
- "qcom,pcie-msm8996" for msm8996 or apq8096
@@ -90,6 +91,8 @@
Definition: Should contain the following entries
- "core" Clocks the pcie hw block
- "phy" Clocks the pcie PHY block
+ - "aux" Clocks the pcie AUX block
+ - "ref" Clocks the pcie ref block
- clock-names:
Usage: required for apq8084/ipq4019
Value type: <stringlist>
@@ -177,6 +180,7 @@
- "pwr" PWR reset
- "ahb" AHB reset
- "phy_ahb" PHY AHB reset
+ - "ext" EXT reset
- reset-names:
Usage: required for ipq8074
@@ -277,14 +281,17 @@
<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc PCIE_A_CLK>,
<&gcc PCIE_H_CLK>,
- <&gcc PCIE_PHY_CLK>;
- clock-names = "core", "iface", "phy";
+ <&gcc PCIE_PHY_CLK>,
+ <&gcc PCIE_AUX_CLK>,
+ <&gcc PCIE_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
resets = <&gcc PCIE_ACLK_RESET>,
<&gcc PCIE_HCLK_RESET>,
<&gcc PCIE_POR_RESET>,
<&gcc PCIE_PCI_RESET>,
- <&gcc PCIE_PHY_RESET>;
- reset-names = "axi", "ahb", "por", "pci", "phy";
+ <&gcc PCIE_PHY_RESET>,
+ <&gcc PCIE_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
pinctrl-0 = <&pcie_pins_default>;
pinctrl-names = "default";
};
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
new file mode 100644
index 000000000000..cfe25cface21
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-ep.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI J721E PCI EP (PCIe Wrapper)
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+ - $ref: "cdns-pcie-ep.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - ti,j721e-pcie-ep
+
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: intd_cfg
+ - const: user_cfg
+ - const: reg
+ - const: mem
+
+ ti,syscon-pcie-ctrl:
+ description: Phandle to the SYSCON entry required for configuring PCIe mode
+ and link speed.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: clock-specifier to represent input to the PCIe
+
+ clock-names:
+ items:
+ - const: fck
+
+ dma-coherent:
+ description: Indicates that the PCIe IP block can ensure the coherency
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - ti,syscon-pcie-ctrl
+ - max-link-speed
+ - num-lanes
+ - power-domains
+ - clocks
+ - clock-names
+ - cdns,max-outbound-regions
+ - dma-coherent
+ - max-functions
+ - phys
+ - phy-names
+
+examples:
+ - |
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie0_ep: pcie-ep@d000000 {
+ compatible = "ti,j721e-pcie-ep";
+ reg = <0x00 0x02900000 0x00 0x1000>,
+ <0x00 0x02907000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x10000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 239 1>;
+ clock-names = "fck";
+ cdns,max-outbound-regions = <16>;
+ max-functions = /bits/ 8 <6>;
+ dma-coherent;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
new file mode 100644
index 000000000000..d7b60487c6c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI J721E PCI Host (PCIe Wrapper)
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+ - $ref: "cdns-pcie-host.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - ti,j721e-pcie-host
+
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: intd_cfg
+ - const: user_cfg
+ - const: reg
+ - const: cfg
+
+ ti,syscon-pcie-ctrl:
+ description: Phandle to the SYSCON entry required for configuring PCIe mode
+ and link speed.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: clock-specifier to represent input to the PCIe
+
+ clock-names:
+ items:
+ - const: fck
+
+ vendor-id:
+ const: 0x104c
+
+ device-id:
+ const: 0xb00d
+
+ msi-map: true
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - ti,syscon-pcie-ctrl
+ - max-link-speed
+ - num-lanes
+ - power-domains
+ - clocks
+ - clock-names
+ - vendor-id
+ - device-id
+ - msi-map
+ - dma-coherent
+ - dma-ranges
+ - ranges
+ - reset-gpios
+ - phys
+ - phy-names
+
+examples:
+ - |
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie0_rc: pcie@2900000 {
+ compatible = "ti,j721e-pcie-host";
+ reg = <0x00 0x02900000 0x00 0x1000>,
+ <0x00 0x02907000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x10000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 239 1>;
+ clock-names = "fck";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xf>;
+ vendor-id = <0x104c>;
+ device-id = <0xb00d>;
+ msi-map = <0x0 &gic_its 0x0 0x10000>;
+ dma-coherent;
+ reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ ranges = <0x01000000 0x0 0x10001000 0x00 0x10001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x10011000 0x00 0x10011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
new file mode 100644
index 000000000000..a2bbc0eb7220
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xilinx-versal-cpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CPM Host Controller device tree for Xilinx Versal SoCs
+
+maintainers:
+ - Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ const: xlnx,versal-cpm-host-1.00
+
+ reg:
+ items:
+ - description: Configuration space region and bridge registers.
+ - description: CPM system level control and status registers.
+
+ reg-names:
+ items:
+ - const: cfg
+ - const: cpm_slcr
+
+ interrupts:
+ maxItems: 1
+
+ msi-map:
+ description:
+ Maps a Requester ID to an MSI controller and associated MSI sideband data.
+
+ ranges:
+ maxItems: 2
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupt-controller:
+ description: Interrupt controller node for handling legacy PCI interrupts.
+ type: object
+ properties:
+ "#address-cells":
+ const: 0
+ "#interrupt-cells":
+ const: 1
+ "interrupt-controller": true
+ additionalProperties: false
+
+required:
+ - reg
+ - reg-names
+ - "#interrupt-cells"
+ - interrupts
+ - interrupt-parent
+ - interrupt-map
+ - interrupt-map-mask
+ - bus-range
+ - msi-map
+ - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+ - |
+
+ versal {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cpm_pcie: pcie@fca10000 {
+ compatible = "xlnx,versal-cpm-host-1.00";
+ device_type = "pci";
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ interrupts = <0 72 4>;
+ interrupt-parent = <&gic>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc_0 0>,
+ <0 0 0 2 &pcie_intc_0 1>,
+ <0 0 0 3 &pcie_intc_0 2>,
+ <0 0 0 4 &pcie_intc_0 3>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+ <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
+ msi-map = <0x0 &its_gic 0x0 0x10000>;
+ reg = <0x6 0x00000000 0x0 0x10000000>,
+ <0x0 0xfca10000 0x0 0x1000>;
+ reg-names = "cfg", "cpm_slcr";
+ pcie_intc_0: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+ };