summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-05-06 23:37:55 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2021-05-06 23:37:55 -0700
commitaef511fb91b6efb2d355c2704cf979f3202d310a (patch)
treed94df6d5c0c297ade8a45594602006b04e95ad59 /Documentation
parente48661230cc35b3d0f4367eddfc19f86463ab917 (diff)
parent05665cef4b745cb46b1d1b8e96deaa25464092d3 (diff)
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - three new touchscreen drivers: Hycon HY46XX, ILITEK Lego Series, and MStar MSG2638 - a new driver for Azoteq IQS626A proximity and touch controller - addition of Amazon Game Controller to the list of devices handled by the xpad driver - Elan touchscreen driver will avoid binding to devices described as I2CHID compatible in ACPI tables - various driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (56 commits) Input: xpad - add support for Amazon Game Controller Input: ili210x - add missing negation for touch indication on ili210x MAINTAINERS: repair reference in HYCON HY46XX TOUCHSCREEN SUPPORT Input: add driver for the Hycon HY46XX touchpanel series dt-bindings: touchscreen: Add HY46XX bindings dt-bindings: Add Hycon Technology vendor prefix Input: cyttsp - flag the device properly Input: cyttsp - set abs params for ABS_MT_TOUCH_MAJOR Input: cyttsp - drop the phys path Input: cyttsp - reduce reset pulse timings Input: cyttsp - error message on boot mode exit error Input: apbps2 - remove useless variable Input: mms114 - support MMS136 Input: mms114 - convert bindings to YAML and extend Input: Add support for ILITEK Lego Series dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindings Input: add MStar MSG2638 touchscreen driver dt-bindings: input/touchscreen: add bindings for msg2638 Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-driver-input-exc30009
-rw-r--r--Documentation/devicetree/bindings/input/atmel,maxtouch.yaml32
-rw-r--r--Documentation/devicetree/bindings/input/iqs626a.yaml843
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml75
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml119
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml73
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt80
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml87
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/mms114.txt42
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml69
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml2
-rw-r--r--Documentation/input/devices/rotary-encoder.rst8
12 files changed, 1315 insertions, 124 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-input-exc3000 b/Documentation/ABI/testing/sysfs-driver-input-exc3000
index cd7c578aef2c..704434b277b0 100644
--- a/Documentation/ABI/testing/sysfs-driver-input-exc3000
+++ b/Documentation/ABI/testing/sysfs-driver-input-exc3000
@@ -15,3 +15,12 @@ Description: Reports the model identification provided by the touchscreen, fo
Access: Read
Valid values: Represented as string
+
+What: /sys/bus/i2c/devices/xxx/type
+Date: Jan 2021
+Contact: linux-input@vger.kernel.org
+Description: Reports the type identification provided by the touchscreen, for example "PCAP82H80 Series"
+
+ Access: Read
+
+ Valid values: Represented as string
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
index 8c6418f76e94..3ec579d63570 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
@@ -39,6 +39,13 @@ properties:
(active low). The line must be flagged with
GPIO_ACTIVE_LOW.
+ wake-gpios:
+ maxItems: 1
+ description:
+ Optional GPIO specifier for the touchscreen's wake pin
+ (active low). The line must be flagged with
+ GPIO_ACTIVE_LOW.
+
linux,gpio-keymap:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: |
@@ -53,6 +60,29 @@ properties:
or experiment to determine which bit corresponds to which input. Use
KEY_RESERVED for unused padding values.
+ atmel,wakeup-method:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The WAKE line is an active-low input that is used to wake up the touch
+ controller from deep-sleep mode before communication with the controller
+ could be started. This optional feature used to minimize current
+ consumption when the controller is in deep sleep mode. This feature is
+ relevant only to some controller families, like mXT1386 controller for
+ example.
+
+ The WAKE pin can be connected in one of the following ways:
+ 1) left permanently low
+ 2) connected to the I2C-compatible SCL pin
+ 3) connected to a GPIO pin on the host
+ enum:
+ - 0 # ATMEL_MXT_WAKEUP_NONE
+ - 1 # ATMEL_MXT_WAKEUP_I2C_SCL
+ - 2 # ATMEL_MXT_WAKEUP_GPIO
+ default: 0
+
+ wakeup-source:
+ type: boolean
+
required:
- compatible
- reg
@@ -63,6 +93,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/input/atmel-maxtouch.h>
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
@@ -75,6 +106,7 @@ examples:
reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
vdda-supply = <&ab8500_ldo_aux2_reg>;
vdd-supply = <&ab8500_ldo_aux5_reg>;
+ atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
};
};
diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml
new file mode 100644
index 000000000000..0cb736c541c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/iqs626a.yaml
@@ -0,0 +1,843 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/iqs626a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS626A Capacitive Touch Controller
+
+maintainers:
+ - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+ The Azoteq IQS626A is a 14-channel capacitive touch controller that features
+ additional Hall-effect and inductive sensing capabilities.
+
+ Link to datasheet: https://www.azoteq.com/
+
+allOf:
+ - $ref: touchscreen/touchscreen.yaml#
+
+properties:
+ compatible:
+ const: azoteq,iqs626a
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ azoteq,suspend-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the power mode during suspend as follows:
+ 0: Automatic (same as normal runtime, i.e. suspend/resume disabled)
+ 1: Low power (all sensing at a reduced reporting rate)
+ 2: Ultra-low power (ULP channel proximity sensing)
+ 3: Halt (no sensing)
+
+ azoteq,clk-div:
+ type: boolean
+ description: Divides the device's core clock by a factor of 4.
+
+ azoteq,ulp-enable:
+ type: boolean
+ description:
+ Permits the device to automatically enter ultra-low-power mode from low-
+ power mode.
+
+ azoteq,ulp-update:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ default: 3
+ description: |
+ Specifies the rate at which the trackpad, generic and Hall channels are
+ updated during ultra-low-power mode as follows:
+ 0: 8
+ 1: 13
+ 2: 28
+ 3: 54
+ 4: 89
+ 5: 135
+ 6: 190
+ 7: 256
+
+ azoteq,ati-band-disable:
+ type: boolean
+ description: Disables the ATI band check.
+
+ azoteq,ati-lp-only:
+ type: boolean
+ description: Limits automatic ATI to low-power mode.
+
+ azoteq,gpio3-select:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ default: 1
+ description: |
+ Selects the channel or group of channels for which the GPIO3 pin
+ represents touch state as follows:
+ 0: None
+ 1: ULP channel
+ 2: Trackpad
+ 3: Trackpad
+ 4: Generic channel 0
+ 5: Generic channel 1
+ 6: Generic channel 2
+ 7: Hall channel
+
+ azoteq,reseed-select:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the event(s) that prompt the device to reseed (i.e. reset the
+ long-term average) of an associated channel as follows:
+ 0: None
+ 1: Proximity
+ 2: Proximity or touch
+ 3: Proximity, touch or deep touch
+
+ azoteq,thresh-extend:
+ type: boolean
+ description: Multiplies all touch and deep-touch thresholds by 4.
+
+ azoteq,tracking-enable:
+ type: boolean
+ description:
+ Enables all associated channels to track their respective reference
+ channels.
+
+ azoteq,reseed-offset:
+ type: boolean
+ description:
+ Applies an 8-count offset to all long-term averages upon either ATI or
+ reseed events.
+
+ azoteq,rate-np-ms:
+ minimum: 0
+ maximum: 255
+ default: 150
+ description: Specifies the report rate (in ms) during normal-power mode.
+
+ azoteq,rate-lp-ms:
+ minimum: 0
+ maximum: 255
+ default: 150
+ description: Specifies the report rate (in ms) during low-power mode.
+
+ azoteq,rate-ulp-ms:
+ multipleOf: 16
+ minimum: 0
+ maximum: 4080
+ default: 0
+ description: Specifies the report rate (in ms) during ultra-low-power mode.
+
+ azoteq,timeout-pwr-ms:
+ multipleOf: 512
+ minimum: 0
+ maximum: 130560
+ default: 2560
+ description:
+ Specifies the length of time (in ms) to wait for an event before moving
+ from normal-power mode to low-power mode, or (if 'azoteq,ulp-enable' is
+ present) from low-power mode to ultra-low-power mode.
+
+ azoteq,timeout-lta-ms:
+ multipleOf: 512
+ minimum: 0
+ maximum: 130560
+ default: 40960
+ description:
+ Specifies the length of time (in ms) to wait before resetting the long-
+ term average of all channels. Specify the maximum timeout to disable it
+ altogether.
+
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+
+patternProperties:
+ "^ulp-0|generic-[0-2]|hall$":
+ type: object
+ description:
+ Represents a single sensing channel. A channel is active if defined and
+ inactive otherwise.
+
+ properties:
+ azoteq,ati-exclude:
+ type: boolean
+ description:
+ Prevents the channel from participating in an ATI event that is
+ manually triggered during initialization.
+
+ azoteq,reseed-disable:
+ type: boolean
+ description:
+ Prevents the channel from being reseeded if the long-term average
+ timeout (defined in 'azoteq,timeout-lta') expires.
+
+ azoteq,meas-cap-decrease:
+ type: boolean
+ description:
+ Decreases the internal measurement capacitance from 60 pF to 15 pF.
+
+ azoteq,rx-inactive:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+ default: 0
+ description: |
+ Specifies how inactive CRX pins are to be terminated as follows:
+ 0: VSS
+ 1: Floating
+ 2: VREG (generic channels only)
+
+ azoteq,linearize:
+ type: boolean
+ description:
+ Enables linearization of the channel's counts (generic and Hall
+ channels) or inverts the polarity of the channel's proximity or
+ touch states (ULP channel).
+
+ azoteq,dual-direction:
+ type: boolean
+ description:
+ Specifies that the channel's long-term average is to freeze in the
+ presence of either increasing or decreasing counts, thereby permit-
+ ting events to be reported in either direction.
+
+ azoteq,filt-disable:
+ type: boolean
+ description: Disables raw count filtering for the channel.
+
+ azoteq,ati-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ description: |
+ Specifies the channel's ATI mode as follows:
+ 0: Disabled
+ 1: Semi-partial
+ 2: Partial
+ 3: Full
+
+ The default value is a function of the channel and the device's reset
+ user interface (RUI); reference the datasheet for further information
+ about the available RUI options.
+
+ azoteq,ati-base:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [75, 100, 150, 200]
+ description:
+ Specifies the channel's ATI base. The default value is a function
+ of the channel and the device's RUI.
+
+ azoteq,ati-target:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ multipleOf: 32
+ minimum: 0
+ maximum: 2016
+ description:
+ Specifies the channel's ATI target. The default value is a function
+ of the channel and the device's RUI.
+
+ azoteq,cct-increase:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 16
+ default: 0
+ description:
+ Specifies the degree to which the channel's charge cycle time is to
+ be increased, with 0 representing no increase. The maximum value is
+ limited to 4 in the case of the ULP channel, and the property is un-
+ available entirely in the case of the Hall channel.
+
+ azoteq,proj-bias:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the bias current applied during projected-capacitance
+ sensing as follows:
+ 0: 2.5 uA
+ 1: 5 uA
+ 2: 10 uA
+ 3: 20 uA
+
+ This property is unavailable in the case of the Hall channel.
+
+ azoteq,sense-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ description: |
+ Specifies the channel's sensing frequency as follows (parenthesized
+ numbers represent the frequency if 'azoteq,clk-div' is present):
+ 0: 4 MHz (1 MHz)
+ 1: 2 MHz (500 kHz)
+ 2: 1 MHz (250 kHz)
+ 3: 500 kHz (125 kHz)
+
+ This property is unavailable in the case of the Hall channel. The
+ default value is a function of the channel and the device's RUI.
+
+ azoteq,ati-band-tighten:
+ type: boolean
+ description:
+ Tightens the ATI band from 1/8 to 1/16 of the desired target (ULP and
+ generic channels only).
+
+ azoteq,proj-enable:
+ type: boolean
+ description: Enables projected-capacitance sensing (ULP channel only).
+
+ azoteq,filt-str-np-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the raw count filter strength during normal-power mode (ULP
+ and generic channels only).
+
+ azoteq,filt-str-lp-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the raw count filter strength during low-power mode (ULP and
+ generic channels only).
+
+ azoteq,filt-str-np-lta:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the long-term average filter strength during normal-power
+ mode (ULP and generic channels only).
+
+ azoteq,filt-str-lp-lta:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the long-term average filter strength during low-power mode
+ (ULP and generic channels only).
+
+ azoteq,rx-enable:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 7
+ description:
+ Specifies the CRX pin(s) associated with the channel.
+
+ This property is unavailable in the case of the Hall channel. The
+ default value is a function of the channel and the device's RUI.
+
+ azoteq,tx-enable:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 7
+ description:
+ Specifies the TX pin(s) associated with the channel.
+
+ This property is unavailable in the case of the Hall channel. The
+ default value is a function of the channel and the device's RUI.
+
+ azoteq,local-cap-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4]
+ default: 0
+ description: |
+ Specifies the capacitance to be added to the channel as follows:
+ 0: 0 pF
+ 1: 0.5 pF
+ 2: 1.0 pF
+ 3: 1.5 pF
+ 4: 2.0 pF
+
+ This property is unavailable in the case of the ULP or Hall channels.
+
+ azoteq,sense-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 8, 9, 12, 14, 15]
+ description: |
+ Specifies the channel's sensing mode as follows:
+ 0: Self capacitance
+ 1: Projected capacitance
+ 8: Self inductance
+ 9: Mutual inductance
+ 12: External
+ 14: Hall effect
+ 15: Temperature
+
+ This property is unavailable in the case of the ULP or Hall channels.
+ The default value is a function of the channel and the device's RUI.
+
+ azoteq,tx-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the inductive sensing excitation frequency as follows
+ (parenthesized numbers represent the frequency if 'azoteq,clk-div'
+ is present):
+ 0: 16 MHz (4 MHz)
+ 1: 8 MHz (2 MHz)
+ 2: 4 MHz (1 MHz)
+ 3: 2 MHz (500 kHz)
+
+ This property is unavailable in the case of the ULP or Hall channels.
+
+ azoteq,invert-enable:
+ type: boolean
+ description:
+ Inverts the polarity of the states reported for proximity, touch and
+ deep-touch events relative to their respective thresholds (generic
+ channels only).
+
+ azoteq,comp-disable:
+ type: boolean
+ description:
+ Disables compensation for the channel (generic channels only).
+
+ azoteq,static-enable:
+ type: boolean
+ description:
+ Enables the static front-end for the channel (generic channels only).
+
+ azoteq,assoc-select:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ minItems: 1
+ maxItems: 6
+ items:
+ enum:
+ - ulp-0
+ - trackpad-3x2
+ - trackpad-3x3
+ - generic-0
+ - generic-1
+ - generic-2
+ - hall
+ description:
+ Specifies the associated channels for which the channel serves as a
+ reference channel. By default, no channels are selected. This prop-
+ erty is only available for the generic channels.
+
+ azoteq,assoc-weight:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 0
+ description:
+ Specifies the channel's impact weight if it acts as an associated
+ channel (0 = 0% impact, 255 = 200% impact). This property is only
+ available for the generic channels.
+
+ patternProperties:
+ "^event-(prox|touch|deep)(-alt)?$":
+ type: object
+ description:
+ Represents a proximity, touch or deep-touch event reported by the
+ channel in response to a decrease in counts. Node names suffixed with
+ '-alt' instead correspond to an increase in counts.
+
+ By default, the long-term average tracks an increase in counts such
+ that only events corresponding to a decrease in counts are reported
+ (refer to the datasheet for more information).
+
+ Specify 'azoteq,dual-direction' to freeze the long-term average when
+ the counts increase or decrease such that events of either direction
+ can be reported. Alternatively, specify 'azoteq,invert-enable' to in-
+ vert the polarity of the states reported by the channel.
+
+ Complementary events (e.g. event-touch and event-touch-alt) can both
+ be present and specify different key or switch codes, but not differ-
+ ent thresholds or hysteresis (if applicable).
+
+ Proximity events are unavailable in the case of the Hall channel, and
+ deep-touch events are only available for the generic channels. Unless
+ otherwise specified, default values are a function of the channel and
+ the device's RUI.
+
+ properties:
+ azoteq,thresh:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ description: Specifies the threshold for the event.
+
+ azoteq,hyst:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description:
+ Specifies the hysteresis for the event (touch and deep-touch
+ events only).
+
+ linux,code:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Numeric key or switch code associated with the event.
+
+ linux,input-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 5]
+ description:
+ Specifies whether the event is to be interpreted as a key (1) or
+ a switch (5). By default, Hall-channel events are interpreted as
+ switches and all others are interpreted as keys.
+
+ dependencies:
+ linux,input-type: ["linux,code"]
+
+ additionalProperties: false
+
+ dependencies:
+ azoteq,assoc-weight: ["azoteq,assoc-select"]
+
+ additionalProperties: false
+
+ "^trackpad-3x[2-3]$":
+ type: object
+ description:
+ Represents all channels associated with the trackpad. The channels are
+ collectively active if the trackpad is defined and inactive otherwise.
+
+ properties:
+ azoteq,ati-exclude:
+ type: boolean
+ description:
+ Prevents the trackpad channels from participating in an ATI event
+ that is manually triggered during initialization.
+
+ azoteq,reseed-disable:
+ type: boolean
+ description:
+ Prevents the trackpad channels from being reseeded if the long-term
+ average timeout (defined in 'azoteq,timeout-lta') expires.
+
+ azoteq,meas-cap-decrease:
+ type: boolean
+ description:
+ Decreases the internal measurement capacitance from 60 pF to 15 pF.
+
+ azoteq,rx-inactive:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ default: 0
+ description: |
+ Specifies how inactive CRX pins are to be terminated as follows:
+ 0: VSS
+ 1: Floating
+
+ azoteq,linearize:
+ type: boolean
+ description: Inverts the polarity of the trackpad's touch state.
+
+ azoteq,dual-direction:
+ type: boolean
+ description:
+ Specifies that the trackpad's long-term averages are to freeze in
+ the presence of either increasing or decreasing counts, thereby
+ permitting events to be reported in either direction.
+
+ azoteq,filt-disable:
+ type: boolean
+ description: Disables raw count filtering for the trackpad channels.
+
+ azoteq,ati-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the trackpad's ATI mode as follows:
+ 0: Disabled
+ 1: Semi-partial
+ 2: Partial
+ 3: Full
+
+ azoteq,ati-base:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 6
+ maxItems: 9
+ items:
+ minimum: 45
+ maximum: 300
+ default: [45, 45, 45, 45, 45, 45, 45, 45, 45]
+ description: Specifies each individual trackpad channel's ATI base.
+
+ azoteq,ati-target:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ multipleOf: 32
+ minimum: 0
+ maximum: 2016
+ default: 0
+ description: Specifies the trackpad's ATI target.
+
+ azoteq,cct-increase:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 4
+ default: 0
+ description:
+ Specifies the degree to which the trackpad's charge cycle time is to
+ be increased, with 0 representing no increase.
+
+ azoteq,proj-bias:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the bias current applied during projected-capacitance
+ sensing as follows:
+ 0: 2.5 uA
+ 1: 5 uA
+ 2: 10 uA
+ 3: 20 uA
+
+ azoteq,sense-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the trackpad's sensing frequency as follows (parenthesized
+ numbers represent the frequency if 'azoteq,clk-div' is present):
+ 0: 4 MHz (1 MHz)
+ 1: 2 MHz (500 kHz)
+ 2: 1 MHz (250 kHz)
+ 3: 500 kHz (125 kHz)
+
+ azoteq,ati-band-tighten:
+ type: boolean
+ description:
+ Tightens the ATI band from 1/8 to 1/16 of the desired target.
+
+ azoteq,thresh:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 6
+ maxItems: 9
+ items:
+ minimum: 0
+ maximum: 255
+ default: [0, 0, 0, 0, 0, 0, 0, 0, 0]
+ description:
+ Specifies each individual trackpad channel's touch threshold.
+
+ azoteq,hyst:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ default: 0
+ description: Specifies the trackpad's touch hysteresis.
+
+ azoteq,lta-update:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ default: 0
+ description: |
+ Specifies the update rate of the trackpad's long-term average during
+ ultra-low-power mode as follows:
+ 0: 2
+ 1: 4
+ 2: 8
+ 3: 16
+ 4: 32
+ 5: 64
+ 6: 128
+ 7: 255
+
+ azoteq,filt-str-trackpad:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: Specifies the trackpad coordinate filter strength.
+
+ azoteq,filt-str-np-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the raw count filter strength during normal-power mode.
+
+ azoteq,filt-str-lp-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the raw count filter strength during low-power mode.
+
+ linux,keycodes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 6
+ description: |
+ Specifies the numeric keycodes associated with each available gesture
+ in the following order (enter 0 for unused gestures):
+ 0: Positive flick or swipe in X direction
+ 1: Negative flick or swipe in X direction
+ 2: Positive flick or swipe in Y direction
+ 3: Negative flick or swipe in Y direction
+ 4: Tap
+ 5: Hold
+
+ azoteq,gesture-swipe:
+ type: boolean
+ description:
+ Directs the device to interpret axial gestures as a swipe (finger
+ remains on trackpad) instead of a flick (finger leaves trackpad).
+
+ azoteq,timeout-tap-ms:
+ multipleOf: 16
+ minimum: 0
+ maximum: 4080
+ default: 0
+ description:
+ Specifies the length of time (in ms) within which a trackpad touch
+ must be released in order to be interpreted as a tap.
+
+ azoteq,timeout-swipe-ms:
+ multipleOf: 16
+ minimum: 0
+ maximum: 4080
+ default: 0
+ description:
+ Specifies the length of time (in ms) within which an axial gesture
+ must be completed in order to be interpreted as a flick or swipe.
+
+ azoteq,thresh-swipe:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 0
+ description:
+ Specifies the number of points across which an axial gesture must
+ travel in order to be interpreted as a flick or swipe.
+
+ dependencies:
+ azoteq,gesture-swipe: ["linux,keycodes"]
+ azoteq,timeout-tap-ms: ["linux,keycodes"]
+ azoteq,timeout-swipe-ms: ["linux,keycodes"]
+ azoteq,thresh-swipe: ["linux,keycodes"]
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ iqs626a@44 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "azoteq,iqs626a";
+ reg = <0x44>;
+ interrupt-parent = <&gpio>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+ azoteq,rate-np-ms = <16>;
+ azoteq,rate-lp-ms = <160>;
+
+ azoteq,timeout-pwr-ms = <2560>;
+ azoteq,timeout-lta-ms = <32768>;
+
+ ulp-0 {
+ azoteq,meas-cap-decrease;
+
+ azoteq,ati-base = <75>;
+ azoteq,ati-target = <1024>;
+
+ azoteq,rx-enable = <2>, <3>, <4>,
+ <5>, <6>, <7>;
+
+ event-prox {
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ trackpad-3x3 {
+ azoteq,filt-str-np-cnt = <1>;
+ azoteq,filt-str-lp-cnt = <1>;
+
+ azoteq,hyst = <4>;
+ azoteq,thresh = <35>, <40>, <40>,
+ <38>, <33>, <38>,
+ <35>, <35>, <35>;
+
+ azoteq,ati-mode = <3>;
+ azoteq,ati-base = <195>, <195>, <195>,
+ <195>, <195>, <195>,
+ <195>, <195>, <195>;
+ azoteq,ati-target = <512>;
+
+ azoteq,proj-bias = <1>;
+ azoteq,sense-freq = <2>;
+
+ linux,keycodes = <KEY_VOLUMEUP>,
+ <KEY_VOLUMEDOWN>,
+ <KEY_NEXTSONG>,
+ <KEY_PREVIOUSSONG>,
+ <KEY_PLAYPAUSE>,
+ <KEY_STOPCD>;
+
+ azoteq,gesture-swipe;
+ azoteq,timeout-swipe-ms = <800>;
+ azoteq,timeout-tap-ms = <400>;
+ azoteq,thresh-swipe = <40>;
+ };
+
+ /*
+ * Preserve the default register settings for
+ * the temperature-tracking channel leveraged
+ * by reset user interface (RUI) 1.
+ *
+ * Scalar properties (e.g. ATI mode) are left
+ * untouched by simply omitting them; boolean
+ * properties must be specified explicitly as
+ * needed.
+ */
+ generic-2 {
+ azoteq,reseed-disable;
+ azoteq,meas-cap-decrease;
+ azoteq,dual-direction;
+ azoteq,comp-disable;
+ azoteq,static-enable;
+ };
+
+ hall {
+ azoteq,reseed-disable;
+ azoteq,meas-cap-decrease;
+
+ event-touch {
+ linux,code = <SW_LID>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml
new file mode 100644
index 000000000000..b5f377215c09
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/azoteq,iqs5xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
+
+maintainers:
+ - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+ The Azoteq IQS550, IQS572 and IQS525 trackpad and touchscreen controllers
+ employ projected-capacitance sensing and can track up to five independent
+ contacts.
+
+ Link to datasheet: https://www.azoteq.com/
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - azoteq,iqs550
+ - azoteq,iqs572
+ - azoteq,iqs525
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ wakeup-source: true
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@74 {
+ compatible = "azoteq,iqs550";
+ reg = <0x74>;
+ interrupt-parent = <&gpio>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+ reset-gpios = <&gpio 22 (GPIO_ACTIVE_LOW |
+ GPIO_PUSH_PULL)>;
+
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
new file mode 100644
index 000000000000..942562f1e45b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/hycon,hy46xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hycon HY46XX series touchscreen controller bindings
+
+description: |
+ There are 6 variants of the chip for various touch panel sizes and cover lens material
+ Glass: 0.3mm--4.0mm
+ PET/PMMA: 0.2mm--2.0mm
+ HY4613(B)-N048 < 6"
+ HY4614(B)-N068 7" .. 10.1"
+ HY4621-NS32 < 5"
+ HY4623-NS48 5.1" .. 7"
+ Glass: 0.3mm--8.0mm
+ PET/PMMA: 0.2mm--4.0mm
+ HY4633(B)-N048 < 6"
+ HY4635(B)-N048 < 7" .. 10.1"
+
+maintainers:
+ - Giulio Benetti <giulio.benetti@benettiengineering.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - hycon,hy4613
+ - hycon,hy4614
+ - hycon,hy4621
+ - hycon,hy4623
+ - hycon,hy4633
+ - hycon,hy4635
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ vcc-supply: true
+
+ hycon,threshold:
+ description: Allows setting the sensitivity in the range from 0 to 255.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+
+ hycon,glove-enable:
+ type: boolean
+ description: Allows enabling glove setting.
+
+ hycon,report-speed-hz:
+ description: Allows setting the report speed in Hertz.
+ minimum: 1
+ maximum: 255
+
+ hycon,noise-filter-enable:
+ type: boolean
+ description: Allows enabling power noise filter.
+
+ hycon,filter-data:
+ description: Allows setting how many samples throw before reporting touch
+ in the range from 0 to 5.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+
+ hycon,gain:
+ description: Allows setting the sensitivity distance in the range from 0 to 5.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+
+ hycon,edge-offset:
+ description: Allows setting the edge compensation in the range from 0 to 16.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 16
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+ interrupt-controller: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@1c {
+ compatible = "hycon,hy4633";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
new file mode 100644
index 000000000000..a190e7baac31
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ilitek_ts_i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek I2C Touchscreen Controller
+
+maintainers:
+ - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ilitek,ili2130
+ - ilitek,ili2131
+ - ilitek,ili2132
+ - ilitek,ili2316
+ - ilitek,ili2322
+ - ilitek,ili2323
+ - ilitek,ili2326
+ - ilitek,ili2520
+ - ilitek,ili2521
+
+ reg:
+ const: 0x41
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ wakeup-source:
+ type: boolean
+ description: touchscreen can be used as a wakeup source.
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@41 {
+ compatible = "ilitek,ili2520";
+ reg = <0x41>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ touchscreen-inverted-y;
+ wakeup-source;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt b/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt
deleted file mode 100644
index efa0820e2469..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
-
-Required properties:
-
-- compatible : Must be equal to one of the following:
- "azoteq,iqs550"
- "azoteq,iqs572"
- "azoteq,iqs525"
-
-- reg : I2C slave address for the device.
-
-- interrupts : GPIO to which the device's active-high RDY
- output is connected (see [0]).
-
-- reset-gpios : GPIO to which the device's active-low NRST
- input is connected (see [1]).
-
-Optional properties:
-
-- touchscreen-min-x : See [2].
-
-- touchscreen-min-y : See [2].
-
-- touchscreen-size-x : See [2]. If this property is omitted, the
- maximum x-coordinate is specified by the
- device's "X Resolution" register.
-
-- touchscreen-size-y : See [2]. If this property is omitted, the
- maximum y-coordinate is specified by the
- device's "Y Resolution" register.
-
-- touchscreen-max-pressure : See [2]. Pressure is expressed as the sum of
- the deltas across all channels impacted by a
- touch event. A channel's delta is calculated
- as its count value minus a reference, where
- the count value is inversely proportional to
- the channel's capacitance.
-
-- touchscreen-fuzz-x : See [2].
-
-- touchscreen-fuzz-y : See [2].
-
-- touchscreen-fuzz-pressure : See [2].
-
-- touchscreen-inverted-x : See [2]. Inversion is applied relative to that
- which may already be specified by the device's
- FLIP_X and FLIP_Y register fields.
-
-- touchscreen-inverted-y : See [2]. Inversion is applied relative to that
- which may already be specified by the device's
- FLIP_X and FLIP_Y register fields.
-
-- touchscreen-swapped-x-y : See [2]. Swapping is applied relative to that
- which may already be specified by the device's
- SWITCH_XY_AXIS register field.
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/gpio/gpio.txt
-[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
-
-Example:
-
- &i2c1 {
- /* ... */
-
- touchscreen@74 {
- compatible = "azoteq,iqs550";
- reg = <0x74>;
- interrupt-parent = <&gpio>;
- interrupts = <17 4>;
- reset-gpios = <&gpio 27 1>;
-
- touchscreen-size-x = <640>;
- touchscreen-size-y = <480>;
-
- touchscreen-max-pressure = <16000>;
- };
-
- /* ... */
- };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
new file mode 100644
index 000000000000..62366886fb3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/melfas,mms114.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Melfas MMS114 family touchscreen controller bindings
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ $nodename:
+ pattern: "^touchscreen(@.*)?$"
+
+ compatible:
+ items:
+ - enum:
+ - melfas,mms114
+ - melfas,mms134s
+ - melfas,mms136
+ - melfas,mms152
+ - melfas,mms345l
+
+ reg:
+ description: I2C address
+
+ clock-frequency:
+ description: I2C client clock frequency, defined for host
+ minimum: 100000
+ maximum: 400000
+
+ interrupts:
+ maxItems: 1
+
+ avdd-supply:
+ description: Analog power supply regulator on AVDD pin
+
+ vdd-supply:
+ description: Digital power supply regulator on VDD pin
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+ touchscreen-fuzz-pressure: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+ touchscreen-max-pressure: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@48 {
+ compatible = "melfas,mms114";
+ reg = <0x48>;
+ interrupt-parent = <&gpio>;
+ interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+ avdd-supply = <&ldo1_reg>;
+ vdd-supply = <&ldo2_reg>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+ touchscreen-fuzz-x = <10>;
+ touchscreen-fuzz-y = <10>;
+ touchscreen-fuzz-pressure = <10>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt b/Documentation/devicetree/bindings/input/touchscreen/mms114.txt
deleted file mode 100644
index 707234cfd7e6..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* MELFAS MMS114/MMS152/MMS345L touchscreen controller
-
-Required properties:
-- compatible: should be one of:
- - "melfas,mms114"
- - "melfas,mms152"
- - "melfas,mms345l"
-- reg: I2C address of the chip
-- interrupts: interrupt to which the chip is connected
-- touchscreen-size-x: See [1]
-- touchscreen-size-y: See [1]
-
-Optional properties:
-- touchscreen-fuzz-x: See [1]
-- touchscreen-fuzz-y: See [1]
-- touchscreen-fuzz-pressure: See [1]
-- touchscreen-inverted-x: See [1]
-- touchscreen-inverted-y: See [1]
-- touchscreen-swapped-x-y: See [1]
-
-[1]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
-
-Example:
-
- i2c@00000000 {
- /* ... */
-
- touchscreen@48 {
- compatible = "melfas,mms114";
- reg = <0x48>;
- interrupts = <39 0>;
- touchscreen-size-x = <720>;
- touchscreen-size-y = <1280>;
- touchscreen-fuzz-x = <10>;
- touchscreen-fuzz-y = <10>;
- touchscreen-fuzz-pressure = <10>;
- touchscreen-inverted-x;
- touchscreen-inverted-y;
- };
-
- /* ... */
- };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
new file mode 100644
index 000000000000..3a42c23faf6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/mstar,msg2638.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar msg2638 touchscreen controller Bindings
+
+maintainers:
+ - Vincent Knecht <vincent.knecht@mailoo.org>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ const: mstar,msg2638
+
+ reg:
+ const: 0x26
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ vdd-supply:
+ description: Power supply regulator for the chip
+
+ vddio-supply:
+ description: Power supply regulator for the I2C bus
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@26 {
+ compatible = "mstar,msg2638";
+ reg = <0x26>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_reset_default>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l5>;
+ touchscreen-size-x = <2048>;
+ touchscreen-size-y = <2048>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 99a72a480d32..b868cefc7c55 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -495,6 +495,8 @@ patternProperties:
description: Shenzhen Hugsun Technology Co. Ltd.
"^hwacom,.*":
description: HwaCom Systems Inc.
+ "^hycon,.*":
+ description: Hycon Technology Corp.
"^hydis,.*":
description: Hydis Technologies
"^hyundai,.*":
diff --git a/Documentation/input/devices/rotary-encoder.rst b/Documentation/input/devices/rotary-encoder.rst
index 810ae02bdaa0..5865748c13b9 100644
--- a/Documentation/input/devices/rotary-encoder.rst
+++ b/Documentation/input/devices/rotary-encoder.rst
@@ -107,13 +107,17 @@ example below:
},
};
- static const struct property_entry rotary_encoder_properties[] __initconst = {
+ static const struct property_entry rotary_encoder_properties[] = {
PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24),
PROPERTY_ENTRY_U32("linux,axis", ABS_X),
PROPERTY_ENTRY_U32("rotary-encoder,relative_axis", 0),
{ },
};
+ static const struct software_node rotary_encoder_node = {
+ .properties = rotary_encoder_properties,
+ };
+
static struct platform_device rotary_encoder_device = {
.name = "rotary-encoder",
.id = 0,
@@ -122,7 +126,7 @@ example below:
...
gpiod_add_lookup_table(&rotary_encoder_gpios);
- device_add_properties(&rotary_encoder_device, rotary_encoder_properties);
+ device_add_software_node(&rotary_encoder_device.dev, &rotary_encoder_node);
platform_device_register(&rotary_encoder_device);
...