aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/dts')
-rw-r--r--arch/arm/dts/Makefile4
-rw-r--r--arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi91
-rw-r--r--arch/arm/dts/px30-ringneck-haikou.dts232
-rw-r--r--arch/arm/dts/px30-ringneck.dtsi382
-rw-r--r--arch/arm/dts/px30.dtsi28
-rw-r--r--arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi31
-rw-r--r--arch/arm/dts/rk3399-pinephone-pro.dts474
-rw-r--r--arch/arm/dts/rk3399-puma-haikou.dts5
-rw-r--r--arch/arm/dts/rk3399-puma.dtsi32
-rw-r--r--arch/arm/dts/rv1126-edgeble-neu2-io-u-boot.dtsi10
-rw-r--r--arch/arm/dts/rv1126-edgeble-neu2-io.dts42
-rw-r--r--arch/arm/dts/rv1126-edgeble-neu2.dtsi338
-rw-r--r--arch/arm/dts/rv1126-pinctrl.dtsi211
-rw-r--r--arch/arm/dts/rv1126-u-boot.dtsi62
-rw-r--r--arch/arm/dts/rv1126.dtsi438
15 files changed, 2374 insertions, 6 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index b3baaf482908..44256d9fa940 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -153,6 +153,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
rk3399-nanopi-r4s.dtb \
rk3399-orangepi.dtb \
rk3399-pinebook-pro.dtb \
+ rk3399-pinephone-pro.dtb \
rk3399-puma-haikou.dtb \
rk3399-roc-pc.dtb \
rk3399-roc-pc-mezzanine.dtb \
@@ -170,6 +171,9 @@ dtb-$(CONFIG_ROCKCHIP_RV1108) += \
rv1108-elgin-r1.dtb \
rv1108-evb.dtb
+dtb-$(CONFIG_ROCKCHIP_RV1126) += \
+ rv1126-edgeble-neu2-io.dtb
+
dtb-$(CONFIG_ARCH_S5P4418) += \
s5p4418-nanopi2.dtb
diff --git a/arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi b/arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi
new file mode 100644
index 000000000000..e8a34c7c1eb8
--- /dev/null
+++ b/arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "px30-u-boot.dtsi"
+
+/ {
+ config {
+ u-boot,mmc-env-offset = <0x5000>; /* @ 20KB */
+ u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
+ u-boot,boot-led = "module_led";
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ u-boot,spl-boot-order = "same-as-spl", &emmc, &sdmmc;
+ };
+};
+
+&binman {
+ simple-bin {
+ blob {
+ offset = <((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512)>;
+ };
+ };
+};
+
+&emmc_clk {
+ u-boot,dm-pre-reloc;
+};
+
+&emmc_cmd {
+ u-boot,dm-pre-reloc;
+};
+
+&emmc_bus8 {
+ u-boot,dm-pre-reloc;
+};
+
+&gpio0 {
+ u-boot,dm-pre-reloc;
+};
+
+&gpio1 {
+ u-boot,dm-pre-reloc;
+};
+
+&gpio2 {
+ u-boot,dm-pre-reloc;
+
+ /*
+ * The Qseven BIOS_DISABLE signal on the PX30-µQ7 keeps the on-module
+ * eMMC powered-down initially (in fact it keeps the reset signal
+ * asserted). BIOS_DISABLE_OVERRIDE pin allows to re-enable eMMC after
+ * the SPL has been booted from SD Card.
+ */
+ bios-disable-override-hog {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&pcfg_pull_none_8ma {
+ u-boot,dm-pre-reloc;
+};
+
+&pcfg_pull_up_8ma {
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc_bus4 {
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc_clk {
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc_cmd {
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc_det {
+ u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+ clock-frequency = <24000000>;
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/px30-ringneck-haikou.dts b/arch/arm/dts/px30-ringneck-haikou.dts
new file mode 100644
index 000000000000..08a3ad3e7ae9
--- /dev/null
+++ b/arch/arm/dts/px30-ringneck-haikou.dts
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "px30-ringneck.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Theobroma Systems PX30-uQ7 SoM on Haikou devkit";
+ compatible = "tsd,px30-ringneck-haikou", "rockchip,px30";
+
+ aliases {
+ mmc2 = &sdmmc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&haikou_keys_pin>;
+ pinctrl-names = "default";
+
+ button-batlow-n {
+ label = "BATLOW#";
+ linux,code = <KEY_BATTERY>;
+ gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+ };
+
+ button-slp-btn-n {
+ label = "SLP_BTN#";
+ linux,code = <KEY_SLEEP>;
+ gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+ };
+
+ button-wake-n {
+ label = "WAKE#";
+ linux,code = <KEY_WAKEUP>;
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ switch-lid-btn-n {
+ label = "LID_BTN#";
+ linux,code = <SW_LID>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
+
+ sd_card_led: led-1 {
+ gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc2";
+ function = LED_FUNCTION_SD;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+
+ i2s0-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "Haikou,I2S-codec";
+ simple-audio-card,mclk-fs = <512>;
+
+ simple-audio-card,codec {
+ clocks = <&sgtl5000_clk>;
+ sound-dai = <&sgtl5000>;
+ };
+
+ simple-audio-card,cpu {
+ bitclock-master;
+ frame-master;
+ sound-dai = <&i2s0_8ch>;
+ };
+ };
+
+ sgtl5000_clk: sgtl5000-oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ dc_12v: dc-12v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc3v3_baseboard: vcc3v3-baseboard-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_baseboard";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_baseboard: vcc5v0-baseboard-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_baseboard";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vdda_codec: vdda-codec-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdda_codec";
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_baseboard>;
+ };
+
+ vddd_codec: vddd-codec-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vddd_codec";
+ regulator-boot-on;
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1600000>;
+ vin-supply = <&vcc5v0_baseboard>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&sgtl5000_clk>;
+ #sound-dai-cells = <0>;
+ VDDA-supply = <&vdda_codec>;
+ VDDIO-supply = <&vcc3v3_baseboard>;
+ VDDD-supply = <&vddd_codec>;
+ };
+};
+
+&i2c3 {
+ eeprom@50 {
+ reg = <0x50>;
+ compatible = "atmel,24c01";
+ pagesize = <8>;
+ size = <128>;
+ vcc-supply = <&vcc3v3_baseboard>;
+ };
+};
+
+&i2s0_8ch {
+ status = "okay";
+};
+
+&gmac {
+ status = "okay";
+};
+
+&pinctrl {
+ haikou {
+ haikou_keys_pin: haikou-keys-pin {
+ rockchip,pins =
+ /* WAKE# */
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* SLP_BTN# */
+ <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* LID_BTN */
+ <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* BATLOW# */
+ <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* BIOS_DISABLE# */
+ <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ sd_card_led_pin: sd-card-led-pin {
+ rockchip,pins =
+ <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&sdmmc {
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ vmmc-supply = <&vcc3v3_baseboard>;
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+};
+
+&u2phy_otg {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-0 = <&uart5_xfer>;
+ status = "okay";
+};
+
+&usb20_otg {
+ status = "okay";
+};
diff --git a/arch/arm/dts/px30-ringneck.dtsi b/arch/arm/dts/px30-ringneck.dtsi
new file mode 100644
index 000000000000..12397755830b
--- /dev/null
+++ b/arch/arm/dts/px30-ringneck.dtsi
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ mmc0 = &emmc;
+ mmc1 = &sdio;
+ rtc0 = &rtc_twi;
+ rtc1 = &rk809;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-0 = <&emmc_reset>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&module_led_pin>;
+ status = "okay";
+
+ module_led: led-0 {
+ gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_HEARTBEAT;
+ linux,default-trigger = "heartbeat";
+ color = <LED_COLOR_ID_AMBER>;
+ };
+ };
+
+ vcc5v0_sys: vccsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ supports-emmc;
+ mmc-pwrseq = <&emmc_pwrseq>;
+ non-removable;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_emmc>;
+
+ status = "okay";
+};
+
+/* On-module TI DP83825I PHY but no connector, enable in carrierboard */
+&gmac {
+ snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 50000 50000>;
+ phy-supply = <&vcc_3v3>;
+ clock_in_out = "output";
+};
+
+&gpio2 {
+ /*
+ * The Qseven BIOS_DISABLE signal on the PX30-µQ7 keeps the on-module
+ * eMMC powered-down initially (in fact it keeps the reset signal
+ * asserted). BIOS_DISABLE_OVERRIDE pin allows to re-enable eMMC after
+ * the SPL has been booted from SD Card.
+ */
+ bios-disable-override-hog {
+ gpios = <RK_PB5 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "bios_disable_override";
+ gpio-hog;
+ };
+
+ /*
+ * The BIOS_DISABLE hog is a feedback pin for the actual status of the
+ * signal, ignoring the BIOS_DISABLE_OVERRIDE logic. This usually
+ * represents the state of a switch on the baseboard.
+ */
+ bios-disable-n-hog {
+ gpios = <RK_PC2 GPIO_ACTIVE_LOW>;
+ line-name = "bios_disable";
+ input;
+ gpio-hog;
+ };
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&pmic_int>;
+ pinctrl-names = "default";
+ #clock-cells = <0>;
+ clock-output-names = "xin32k";
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc_3v3>;
+ vcc6-supply = <&vcc_3v3>;
+ vcc7-supply = <&vcc_3v3>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
+ regulator-name = "vcc_3v0_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc_3v3: DCDC_REG5 {
+ regulator-name = "vcc_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-name = "vcc_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_1v0: LDO_REG3 {
+ regulator-name = "vcc_1v0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_lcd: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vcc_lcd";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_1v8_lcd: LDO_REG8 {
+ regulator-name = "vcc_1v8_lcd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG9 {
+ regulator-name = "vcca_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* SE05x is limited to Fast Mode */
+ clock-frequency = <400000>;
+
+ fan: fan@18 {
+ compatible = "ti,amc6821";
+ reg = <0x18>;
+ #cooling-cells = <2>;
+ };
+
+ rtc_twi: rtc@6f {
+ compatible = "isil,isl1208";
+ reg = <0x6f>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2s0_8ch {
+ rockchip,trcm-sync-tx-only;
+
+ pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_lrcktx
+ &i2s0_8ch_sdo0 &i2s0_8ch_sdi0>;
+};
+
+&io_domains {
+ vccio1-supply = <&vcc_3v3>;
+ vccio2-supply = <&vccio_sd>;
+ vccio3-supply = <&vcc_3v3>;
+ vccio4-supply = <&vcc_3v3>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_emmc>;
+ vccio-oscgpi-supply = <&vcc_3v3>;
+
+ status = "okay";
+};
+
+&pinctrl {
+ emmc {
+ emmc_reset: emmc-reset {
+ rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ module_led_pin: module-led-pin {
+ rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins =
+ <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc {
+ vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+};
+
+&u2phy_host {
+ status = "okay";
+};
+
+/* Mule UCAN */
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
diff --git a/arch/arm/dts/px30.dtsi b/arch/arm/dts/px30.dtsi
index 00f50b05d55a..bfa3580429d1 100644
--- a/arch/arm/dts/px30.dtsi
+++ b/arch/arm/dts/px30.dtsi
@@ -365,6 +365,28 @@
status = "disabled";
};
+ i2s0_8ch: i2s@ff060000 {
+ compatible = "rockchip,px30-i2s-tdm";
+ reg = <0x0 0xff060000 0x0 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S0_TX>, <&cru SCLK_I2S0_RX>, <&cru HCLK_I2S0>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ dmas = <&dmac 16>, <&dmac 17>;
+ dma-names = "tx", "rx";
+ rockchip,grf = <&grf>;
+ resets = <&cru SRST_I2S0_TX>, <&cru SRST_I2S0_RX>;
+ reset-names = "tx-m", "rx-m";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_sclkrx
+ &i2s0_8ch_lrcktx &i2s0_8ch_lrckrx
+ &i2s0_8ch_sdo0 &i2s0_8ch_sdi0
+ &i2s0_8ch_sdo1 &i2s0_8ch_sdi1
+ &i2s0_8ch_sdo2 &i2s0_8ch_sdi2
+ &i2s0_8ch_sdo3 &i2s0_8ch_sdi3>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
i2s1_2ch: i2s@ff070000 {
compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
reg = <0x0 0xff070000 0x0 0x1000>;
@@ -528,7 +550,7 @@
i2c0: i2c@ff180000 {
compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xff180000 0x0 0x1000>;
- clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+ clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
@@ -711,7 +733,7 @@
clock-names = "pclk", "timer";
};
- dmac: dmac@ff240000 {
+ dmac: dma-controller@ff240000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xff240000 0x0 0x4000>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -1072,7 +1094,7 @@
};
dsi: dsi@ff450000 {
- compatible = "rockchip,px30-mipi-dsi";
+ compatible = "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi";
reg = <0x0 0xff450000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_MIPI_DSI>;
diff --git a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
new file mode 100644
index 000000000000..1dad283ad052
--- /dev/null
+++ b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Peter Robinson <pbrobinson at gmail.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+
+/ {
+ chosen {
+ u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+ };
+
+ config {
+ u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */
+ };
+};
+
+&rng {
+ status = "okay";
+};
+
+&sdhci {
+ max-frequency = <25000000>;
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc {
+ max-frequency = <20000000>;
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3399-pinephone-pro.dts b/arch/arm/dts/rk3399-pinephone-pro.dts
new file mode 100644
index 000000000000..04403a76238b
--- /dev/null
+++ b/arch/arm/dts/rk3399-pinephone-pro.dts
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Martijn Braam <martijn@brixit.nl>
+ * Copyright (c) 2021 Kamil Trzciński <ayufan@ayufan.eu>
+ */
+
+/*
+ * PinePhone Pro datasheet:
+ * https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Pine64 PinePhonePro";
+ compatible = "pine64,pinephone-pro", "rockchip,rk3399";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdio0;
+ mmc1 = &sdmmc;
+ mmc2 = &sdhci;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn_pin>;
+
+ key-power {
+ debounce-interval = <20>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc3v3_sys: vcc3v3-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcca1v8_s3: vcc1v8-s3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcca1v8_s3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc3v3_sys>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc1v8_codec: vcc1v8-codec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc1v8_codec_en>;
+ regulator-name = "vcc1v8_codec";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ wifi_pwrseq: sdio-wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk818 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h_pin>;
+ /*
+ * Wait between power-on and SDIO access for CYP43455
+ * POR circuit.
+ */
+ post-power-on-delay-ms = <110>;
+ /*
+ * Wait between consecutive toggles for CYP43455 CBUCK
+ * regulator discharge.
+ */
+ power-off-delay-us = <10000>;
+
+ /* WL_REG_ON on module */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk818: pmic@1c {
+ compatible = "rockchip,rk818";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+
+ regulators {
+ vdd_cpu_l: DCDC_REG1 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <875000>;
+ regulator-max-microvolt = <975000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_center: DCDC_REG2 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG1 {
+ regulator-name = "vcca3v0_codec";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vcc3v0_touch: LDO_REG2 {
+ regulator-name = "vcc3v0_touch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vcca1v8_codec: LDO_REG3 {
+ regulator-name = "vcca1v8_codec";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ rk818_pwr_on: LDO_REG4 {
+ regulator-name = "rk818_pwr_on";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG5 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG7 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc3v3_s3: LDO_REG8 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG9 {
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc3v3_s0: SWITCH_REG {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_pin>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <875000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_pin>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <875000>;
+ regulator-max-microvolt = <975000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&cluster0_opp {
+ opp04 {
+ status = "disabled";
+ };
+
+ opp05 {
+ status = "disabled";
+ };
+};
+
+&cluster1_opp {
+ opp06 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1100000 1100000 1150000>;
+ };
+
+ opp07 {
+ status = "disabled";
+ };
+};
+
+&io_domains {
+ bt656-supply = <&vcc1v8_dvp>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vccio_sd>;
+ gpio1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&pinctrl {
+ buttons {
+ pwrbtn_pin: pwrbtn-pin {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_pin: vsel1-pin {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_pin: vsel2-pin {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h_pin: wifi-enable-h-pin {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sound {
+ vcc1v8_codec_en: vcc1v8-codec-en {
+ rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ wireless-bluetooth {
+ bt_wake_pin: bt-wake-pin {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_pin: bt-host-wake-pin {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_reset_pin: bt-reset-pin {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc3v3_sys>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&rk818 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ max-speed = <1500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/rk3399-puma-haikou.dts b/arch/arm/dts/rk3399-puma-haikou.dts
index 292bb7e80cf3..115c14c0a3c6 100644
--- a/arch/arm/dts/rk3399-puma-haikou.dts
+++ b/arch/arm/dts/rk3399-puma-haikou.dts
@@ -49,7 +49,7 @@
sgtl5000_clk: sgtl5000-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <24576000>;
+ clock-frequency = <24576000>;
};
dc_12v: dc-12v {
@@ -207,7 +207,7 @@
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
disable-wp;
- max-frequency = <150000000>;
+ max-frequency = <40000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
vmmc-supply = <&vcc3v3_baseboard>;
@@ -232,6 +232,7 @@
&usbdrd_dwc3_0 {
dr_mode = "otg";
+ extcon = <&extcon_usb3>;
status = "okay";
};
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index fb67db4619ea..aa3e21bd6c8f 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -25,6 +25,13 @@
};
};
+ extcon_usb3: extcon-usb3 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_id>;
+ };
+
clkin_gmac: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
@@ -55,7 +62,6 @@
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
- enable-active-low;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
regulator-name = "vcc5v0_host";
@@ -71,6 +77,17 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ pwm-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&cpu_b0 {
@@ -422,9 +439,22 @@
<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ usb3 {
+ usb3_id: usb3-id {
+ rockchip,pins =
+ <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&sdhci {
+ /*
+ * Signal integrity isn't great at 200MHz but 100MHz has proven stable
+ * enough.
+ */
+ max-frequency = <100000000>;
+
bus-width = <8>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
diff --git a/arch/arm/dts/rv1126-edgeble-neu2-io-u-boot.dtsi b/arch/arm/dts/rv1126-edgeble-neu2-io-u-boot.dtsi
new file mode 100644
index 000000000000..51a1617708ae
--- /dev/null
+++ b/arch/arm/dts/rv1126-edgeble-neu2-io-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+#include "rv1126-u-boot.dtsi"
+
+&sdio {
+ status = "disabled";
+};
diff --git a/arch/arm/dts/rv1126-edgeble-neu2-io.dts b/arch/arm/dts/rv1126-edgeble-neu2-io.dts
new file mode 100644
index 000000000000..dded0a12f0cd
--- /dev/null
+++ b/arch/arm/dts/rv1126-edgeble-neu2-io.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-edgeble-neu2.dtsi"
+
+/ {
+ model = "Edgeble Neu2 IO Board";
+ compatible = "edgeble,neural-compute-module-2-io",
+ "edgeble,neural-compute-module-2", "rockchip,rv1126";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+ rockchip,default-sample-phase = <90>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/rv1126-edgeble-neu2.dtsi b/arch/arm/dts/rv1126-edgeble-neu2.dtsi
new file mode 100644
index 000000000000..cc64ba4be344
--- /dev/null
+++ b/arch/arm/dts/rv1126-edgeble-neu2.dtsi
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+ compatible = "edgeble,neural-compute-module-2", "rockchip,rv1126";
+
+ aliases {
+ mmc0 = &emmc;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vccio_flash: vccio-flash-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&flash_vol_sel>;
+ regulator-name = "vccio_flash";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ sdio_pwrseq: pwrseq-sdio {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk809 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ bus-width = <8>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
+ rockchip,default-sample-phase = <90>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vccio_flash>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc_buck5>;
+ vcc6-supply = <&vcc_buck5>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ regulators {
+ vdd_npu_vepu: DCDC_REG1 {
+ regulator-name = "vdd_npu_vepu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG4 {
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_buck5: DCDC_REG5 {
+ regulator-name = "vcc_buck5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2200000>;
+ };
+ };
+
+ vcc_0v8: LDO_REG1 {
+ regulator-name = "vcc_0v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG2 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd0v8_pmu: LDO_REG3 {
+ regulator-name = "vcc0v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <800000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_dovdd: LDO_REG5 {
+ regulator-name = "vcc_dovdd";
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_dvdd: LDO_REG6 {
+ regulator-name = "vcc_dvdd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_avdd: LDO_REG7 {
+ regulator-name = "vcc_avdd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG8 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: LDO_REG9 {
+ regulator-name = "vcc3v3_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_5v0: SWITCH_REG1 {
+ regulator-name = "vcc_5v0";
+ };
+
+ vcc_3v3: SWITCH_REG2 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ bt {
+ bt_enable: bt-enable {
+ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ flash {
+ flash_vol_sel: flash-vol-sel {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ wifi {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio0-supply = <&vcc1v8_pmu>;
+ pmuio1-supply = <&vcc3v3_sys>;
+ vccio1-supply = <&vccio_flash>;
+ vccio2-supply = <&vccio_sd>;
+ vccio3-supply = <&vcc_1v8>;
+ vccio4-supply = <&vcc_dovdd>;
+ vccio5-supply = <&vcc_1v8>;
+ vccio6-supply = <&vcc_1v8>;
+ vccio7-supply = <&vcc_dovdd>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ max-frequency = <100000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+ rockchip,default-sample-phase = <90>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sys>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,qca9377-bt";
+ clocks = <&rk809 1>;
+ enable-gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; /* BT_RST */
+ max-speed = <2000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_enable>;
+ vddxo-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
diff --git a/arch/arm/dts/rv1126-pinctrl.dtsi b/arch/arm/dts/rv1126-pinctrl.dtsi
new file mode 100644
index 000000000000..28d8d29942fd
--- /dev/null
+++ b/arch/arm/dts/rv1126-pinctrl.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rockchip-pinconf.dtsi"
+
+/*
+ * This file is auto generated by pin2dts tool, please keep these code
+ * by adding changes at end of this file.
+ */
+&pinctrl {
+ emmc {
+ /omit-if-no-ref/
+ emmc_rstnout: emmc-rstnout {
+ rockchip,pins =
+ /* emmc_rstn */
+ <1 RK_PA3 2 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins =
+ /* emmc_d0 */
+ <0 RK_PC4 2 &pcfg_pull_up_drv_level_2>,
+ /* emmc_d1 */
+ <0 RK_PC5 2 &pcfg_pull_up_drv_level_2>,
+ /* emmc_d2 */
+ <0 RK_PC6 2 &pcfg_pull_up_drv_level_2>,
+ /* emmc_d3 */
+ <0 RK_PC7 2 &pcfg_pull_up_drv_level_2>,
+ /* emmc_d4 */
+ <0 RK_PD0 2 &pcfg_pull_up_drv_level_2>,
+ /* emmc_d5 */
+ <0 RK_PD1 2 &pcfg_pull_up_drv_level_2>,
+ /* emmc_d6 */
+ <0 RK_PD2 2 &pcfg_pull_up_drv_level_2>,
+ /* emmc_d7 */
+ <0 RK_PD3 2 &pcfg_pull_up_drv_level_2>;
+ };
+ /omit-if-no-ref/
+ emmc_clk: emmc-clk {
+ rockchip,pins =
+ /* emmc_clko */
+ <0 RK_PD7 2 &pcfg_pull_up_drv_level_2>;
+ };
+ /omit-if-no-ref/
+ emmc_cmd: emmc-cmd {
+ rockchip,pins =
+ /* emmc_cmd */
+ <0 RK_PD5 2 &pcfg_pull_up_drv_level_2>;
+ };
+ };
+ i2c0 {
+ /omit-if-no-ref/
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins =
+ /* i2c0_scl */
+ <0 RK_PB4 1 &pcfg_pull_none_drv_level_0_smt>,
+ /* i2c0_sda */
+ <0 RK_PB5 1 &pcfg_pull_none_drv_level_0_smt>;
+ };
+ };
+ sdmmc0 {
+ /omit-if-no-ref/
+ sdmmc0_bus4: sdmmc0-bus4 {
+ rockchip,pins =
+ /* sdmmc0_d0 */
+ <1 RK_PA4 1 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc0_d1 */
+ <1 RK_PA5 1 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc0_d2 */
+ <1 RK_PA6 1 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc0_d3 */
+ <1 RK_PA7 1 &pcfg_pull_up_drv_level_2>;
+ };
+ /omit-if-no-ref/
+ sdmmc0_clk: sdmmc0-clk {
+ rockchip,pins =
+ /* sdmmc0_clk */
+ <1 RK_PB0 1 &pcfg_pull_up_drv_level_2>;
+ };
+ /omit-if-no-ref/
+ sdmmc0_cmd: sdmmc0-cmd {
+ rockchip,pins =
+ /* sdmmc0_cmd */
+ <1 RK_PB1 1 &pcfg_pull_up_drv_level_2>;
+ };
+ /omit-if-no-ref/
+ sdmmc0_det: sdmmc0-det {
+ rockchip,pins =
+ <0 RK_PA3 1 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ sdmmc0_pwr: sdmmc0-pwr {
+ rockchip,pins =
+ <0 RK_PC0 1 &pcfg_pull_none>;
+ };
+ };
+ sdmmc1 {
+ /omit-if-no-ref/
+ sdmmc1_bus4: sdmmc1-bus4 {
+ rockchip,pins =
+ /* sdmmc1_d0 */
+ <1 RK_PB4 1 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc1_d1 */
+ <1 RK_PB5 1 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc1_d2 */
+ <1 RK_PB6 1 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc1_d3 */
+ <1 RK_PB7 1 &pcfg_pull_up_drv_level_2>;
+ };
+ /omit-if-no-ref/
+ sdmmc1_clk: sdmmc1-clk {
+ rockchip,pins =
+ /* sdmmc1_clk */
+ <1 RK_PB2 1 &pcfg_pull_up_drv_level_2>;
+ };
+ /omit-if-no-ref/
+ sdmmc1_cmd: sdmmc1-cmd {
+ rockchip,pins =
+ /* sdmmc1_cmd */
+ <1 RK_PB3 1 &pcfg_pull_up_drv_level_2>;
+ };
+ /omit-if-no-ref/
+ sdmmc1_det: sdmmc1-det {
+ rockchip,pins =
+ <1 RK_PD0 2 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ sdmmc1_pwr: sdmmc1-pwr {
+ rockchip,pins =
+ <1 RK_PD1 2 &pcfg_pull_none>;
+ };
+ };
+ uart0 {
+ /omit-if-no-ref/
+ uart0_xfer: uart0-xfer {
+ rockchip,pins =
+ /* uart0_rx */
+ <1 RK_PC2 1 &pcfg_pull_up>,
+ /* uart0_tx */
+ <1 RK_PC3 1 &pcfg_pull_up>;
+ };
+ /omit-if-no-ref/
+ uart0_ctsn: uart0-ctsn {
+ rockchip,pins =
+ <1 RK_PC1 1 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ uart0_rtsn: uart0-rtsn {
+ rockchip,pins =
+ <1 RK_PC0 1 &pcfg_pull_none>;
+ };
+ /omit-if-no-ref/
+ uart0_rtsn_gpio: uart0-rts-pin {
+ rockchip,pins =
+ <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+ uart1 {
+ /omit-if-no-ref/
+ uart1m0_xfer: uart1m0-xfer {
+ rockchip,pins =
+ /* uart1_rx_m0 */
+ <0 RK_PB7 2 &pcfg_pull_up>,
+ /* uart1_tx_m0 */
+ <0 RK_PB6 2 &pcfg_pull_up>;
+ };
+ };
+ uart2 {
+ /omit-if-no-ref/
+ uart2m1_xfer: uart2m1-xfer {
+ rockchip,pins =
+ /* uart2_rx_m1 */
+ <3 RK_PA3 1 &pcfg_pull_up>,
+ /* uart2_tx_m1 */
+ <3 RK_PA2 1 &pcfg_pull_up>;
+ };
+ };
+ uart3 {
+ /omit-if-no-ref/
+ uart3m0_xfer: uart3m0-xfer {
+ rockchip,pins =
+ /* uart3_rx_m0 */
+ <3 RK_PC7 4 &pcfg_pull_up>,
+ /* uart3_tx_m0 */
+ <3 RK_PC6 4 &pcfg_pull_up>;
+ };
+ };
+ uart4 {
+ /omit-if-no-ref/
+ uart4m0_xfer: uart4m0-xfer {
+ rockchip,pins =
+ /* uart4_rx_m0 */
+ <3 RK_PA5 4 &pcfg_pull_up>,
+ /* uart4_tx_m0 */
+ <3 RK_PA4 4 &pcfg_pull_up>;
+ };
+ };
+ uart5 {
+ /omit-if-no-ref/
+ uart5m0_xfer: uart5m0-xfer {
+ rockchip,pins =
+ /* uart5_rx_m0 */
+ <3 RK_PA7 4 &pcfg_pull_up>,
+ /* uart5_tx_m0 */
+ <3 RK_PA6 4 &pcfg_pull_up>;
+ };
+ };
+};
diff --git a/arch/arm/dts/rv1126-u-boot.dtsi b/arch/arm/dts/rv1126-u-boot.dtsi
new file mode 100644
index 000000000000..bc77037760e4
--- /dev/null
+++ b/arch/arm/dts/rv1126-u-boot.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+#include "rockchip-u-boot.dtsi"
+
+/ {
+ chosen {
+ u-boot,spl-boot-order = \
+ "same-as-spl", &emmc, &sdmmc;
+ };
+
+ dmc {
+ compatible = "rockchip,rv1126-dmc";
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&gpio0 {
+ u-boot,dm-spl;
+};
+
+&gpio1 {
+ u-boot,dm-spl;
+};
+
+&grf {
+ u-boot,dm-spl;
+};
+
+&pmu {
+ u-boot,dm-spl;
+};
+
+&pmugrf {
+ u-boot,dm-spl;
+};
+
+&xin24m {
+ u-boot,dm-spl;
+};
+
+&cru {
+ u-boot,dm-spl;
+};
+
+&pmucru {
+ u-boot,dm-spl;
+};
+
+&sdmmc {
+ u-boot,dm-spl;
+};
+
+&emmc {
+ u-boot,dm-spl;
+};
+
+&uart2 {
+ u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/rv1126.dtsi b/arch/arm/dts/rv1126.dtsi
new file mode 100644
index 000000000000..1cb43147e90b
--- /dev/null
+++ b/arch/arm/dts/rv1126.dtsi
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rockchip,rv1126-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rockchip,rv1126-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "rockchip,rv1126";
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ i2c0 = &i2c0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@f00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf00>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ };
+
+ cpu1: cpu@f01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf01>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ };
+
+ cpu2: cpu@f02 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf02>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ };
+
+ cpu3: cpu@f03 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf03>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <24000000>;
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ grf: syscon@fe000000 {
+ compatible = "rockchip,rv1126-grf", "syscon", "simple-mfd";
+ reg = <0xfe000000 0x20000>;
+ };
+
+ pmugrf: syscon@fe020000 {
+ compatible = "rockchip,rv1126-pmugrf", "syscon", "simple-mfd";
+ reg = <0xfe020000 0x1000>;
+
+ pmu_io_domains: io-domains {
+ compatible = "rockchip,rv1126-pmu-io-voltage-domain";
+ status = "disabled";
+ };
+ };
+
+ qos_emmc: qos@fe860000 {
+ compatible = "rockchip,rv1126-qos", "syscon";
+ reg = <0xfe860000 0x20>;
+ };
+
+ qos_nandc: qos@fe860080 {
+ compatible = "rockchip,rv1126-qos", "syscon";
+ reg = <0xfe860080 0x20>;
+ };
+
+ qos_sfc: qos@fe860200 {
+ compatible = "rockchip,rv1126-qos", "syscon";
+ reg = <0xfe860200 0x20>;
+ };
+
+ qos_sdio: qos@fe86c000 {
+ compatible = "rockchip,rv1126-qos", "syscon";
+ reg = <0xfe86c000 0x20>;
+ };
+
+ gic: interrupt-controller@feff0000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0xfeff1000 0x1000>,
+ <0xfeff2000 0x2000>,
+ <0xfeff4000 0x2000>,
+ <0xfeff6000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ pmu: power-management@ff3e0000 {
+ compatible = "rockchip,rv1126-pmu", "syscon", "simple-mfd";
+ reg = <0xff3e0000 0x1000>;
+
+ power: power-controller {
+ compatible = "rockchip,rv1126-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@RV1126_PD_NVM {
+ reg = <RV1126_PD_NVM>;
+ clocks = <&cru HCLK_EMMC>,
+ <&cru CLK_EMMC>,
+ <&cru HCLK_NANDC>,
+ <&cru CLK_NANDC>,
+ <&cru HCLK_SFC>,
+ <&cru HCLK_SFCXIP>,
+ <&cru SCLK_SFC>;
+ pm_qos = <&qos_emmc>,
+ <&qos_nandc>,
+ <&qos_sfc>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RV1126_PD_SDIO {
+ reg = <RV1126_PD_SDIO>;
+ clocks = <&cru HCLK_SDIO>,
+ <&cru CLK_SDIO>;
+ pm_qos = <&qos_sdio>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+
+ i2c0: i2c@ff3f0000 {
+ compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
+ reg = <0xff3f0000 0x1000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,grf = <&pmugrf>;
+ clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
+ clock-names = "i2c", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart1: serial@ff410000 {
+ compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+ reg = <0xff410000 0x100>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&pmucru SCLK_UART1>, <&pmucru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 7>, <&dmac 6>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1m0_xfer>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ pmucru: clock-controller@ff480000 {
+ compatible = "rockchip,rv1126-pmucru";
+ reg = <0xff480000 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ cru: clock-controller@ff490000 {
+ compatible = "rockchip,rv1126-cru";
+ reg = <0xff490000 0x1000>;
+ clocks = <&xin24m>;
+ clock-names = "xin24m";
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ dmac: dma-controller@ff4e0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xff4e0000 0x4000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ };
+
+ uart0: serial@ff560000 {
+ compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+ reg = <0xff560000 0x100>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 5>, <&dmac 4>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart2: serial@ff570000 {
+ compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+ reg = <0xff570000 0x100>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 9>, <&dmac 8>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m1_xfer>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@ff580000 {
+ compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+ reg = <0xff580000 0x100>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 11>, <&dmac 10>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3m0_xfer>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart4: serial@ff590000 {
+ compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+ reg = <0xff590000 0x100>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 13>, <&dmac 12>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4m0_xfer>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart5: serial@ff5a0000 {
+ compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+ reg = <0xff5a0000 0x100>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 15>, <&dmac 14>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5m0_xfer>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ saradc: adc@ff5e0000 {
+ compatible = "rockchip,rv1126-saradc", "rockchip,rk3399-saradc";
+ reg = <0xff5e0000 0x100>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ #io-channel-cells = <1>;
+ clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ resets = <&cru SRST_SARADC_P>;
+ reset-names = "saradc-apb";
+ status = "disabled";
+ };
+
+ timer0: timer@ff660000 {
+ compatible = "rockchip,rv1126-timer", "rockchip,rk3288-timer";
+ reg = <0xff660000 0x20>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_TIMER>, <&cru CLK_TIMER0>;
+ clock-names = "pclk", "timer";
+ };
+
+ emmc: mmc@ffc50000 {
+ compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0xffc50000 0x4000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_EMMC>, <&cru CLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <200000000>;
+ power-domains = <&power RV1126_PD_NVM>;
+ status = "disabled";
+ };
+
+ sdmmc: mmc@ffc60000 {
+ compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0xffc60000 0x4000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC>, <&cru CLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <200000000>;
+ status = "disabled";
+ };
+
+ sdio: mmc@ffc70000 {
+ compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0xffc70000 0x4000>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDIO>, <&cru CLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <200000000>;
+ power-domains = <&power RV1126_PD_SDIO>;
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rv1126-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmugrf>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio@ff460000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff460000 0x100>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@ff620000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff620000 0x100>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@ff630000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff630000 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@ff640000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff640000 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@ff650000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff650000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
+
+#include "rv1126-pinctrl.dtsi"
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-01 11:42:34 +0000