diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/block/cciss.c | 79 | ||||
-rw-r--r-- | drivers/char/genrtc.c | 1 | ||||
-rw-r--r-- | drivers/char/rtc.c | 1 | ||||
-rw-r--r-- | drivers/char/sonypi.c | 1 | ||||
-rw-r--r-- | drivers/hid/hid-core.c | 2 | ||||
-rw-r--r-- | drivers/hid/hid-twinhan.c | 4 | ||||
-rw-r--r-- | drivers/hid/hidraw.c | 5 | ||||
-rw-r--r-- | drivers/md/dm.c | 16 | ||||
-rw-r--r-- | drivers/mfd/twl4030-core.c | 89 | ||||
-rw-r--r-- | drivers/mmc/host/pxamci.c | 4 | ||||
-rw-r--r-- | drivers/net/wan/c101.c | 1 | ||||
-rw-r--r-- | drivers/net/wan/n2.c | 1 | ||||
-rw-r--r-- | drivers/net/wan/pci200syn.c | 1 | ||||
-rw-r--r-- | drivers/pci/dmar.c | 13 | ||||
-rw-r--r-- | drivers/pci/hotplug/cpqphp.h | 1 | ||||
-rw-r--r-- | drivers/pci/intel-iommu.c | 82 | ||||
-rw-r--r-- | drivers/pci/pci.c | 27 | ||||
-rw-r--r-- | drivers/pci/pcie/aer/aerdrv.c | 2 | ||||
-rw-r--r-- | drivers/pci/pcie/portdrv_pci.c | 3 | ||||
-rw-r--r-- | drivers/pci/quirks.c | 32 | ||||
-rw-r--r-- | drivers/pci/setup-bus.c | 13 | ||||
-rw-r--r-- | drivers/pci/setup-res.c | 37 | ||||
-rw-r--r-- | drivers/serial/serial_core.c | 7 | ||||
-rw-r--r-- | drivers/spi/amba-pl022.c | 2 | ||||
-rw-r--r-- | drivers/usb/musb/Kconfig | 2 |
25 files changed, 257 insertions, 169 deletions
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index fb5be2d95d52..6399e5090df4 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -68,6 +68,12 @@ MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400" MODULE_VERSION("3.6.20"); MODULE_LICENSE("GPL"); +static int cciss_allow_hpsa; +module_param(cciss_allow_hpsa, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(cciss_allow_hpsa, + "Prevent cciss driver from accessing hardware known to be " + " supported by the hpsa driver"); + #include "cciss_cmd.h" #include "cciss.h" #include <linux/cciss_ioctl.h> @@ -101,8 +107,6 @@ static const struct pci_device_id cciss_pci_device_id[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B}, - {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, {0,} }; @@ -123,8 +127,6 @@ static struct board_type products[] = { {0x409D0E11, "Smart Array 6400 EM", &SA5_access}, {0x40910E11, "Smart Array 6i", &SA5_access}, {0x3225103C, "Smart Array P600", &SA5_access}, - {0x3223103C, "Smart Array P800", &SA5_access}, - {0x3234103C, "Smart Array P400", &SA5_access}, {0x3235103C, "Smart Array P400i", &SA5_access}, {0x3211103C, "Smart Array E200i", &SA5_access}, {0x3212103C, "Smart Array E200", &SA5_access}, @@ -132,6 +134,10 @@ static struct board_type products[] = { {0x3214103C, "Smart Array E200i", &SA5_access}, {0x3215103C, "Smart Array E200i", &SA5_access}, {0x3237103C, "Smart Array E500", &SA5_access}, +/* controllers below this line are also supported by the hpsa driver. */ +#define HPSA_BOUNDARY 0x3223103C + {0x3223103C, "Smart Array P800", &SA5_access}, + {0x3234103C, "Smart Array P400", &SA5_access}, {0x323D103C, "Smart Array P700m", &SA5_access}, {0x3241103C, "Smart Array P212", &SA5_access}, {0x3243103C, "Smart Array P410", &SA5_access}, @@ -140,7 +146,6 @@ static struct board_type products[] = { {0x3249103C, "Smart Array P812", &SA5_access}, {0x324A103C, "Smart Array P712m", &SA5_access}, {0x324B103C, "Smart Array P711m", &SA5_access}, - {0xFFFF103C, "Unknown Smart Array", &SA5_access}, }; /* How long to wait (in milliseconds) for board to go into simple mode */ @@ -3754,7 +3759,27 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) __u64 cfg_offset; __u32 cfg_base_addr; __u64 cfg_base_addr_index; - int i, err; + int i, prod_index, err; + + subsystem_vendor_id = pdev->subsystem_vendor; + subsystem_device_id = pdev->subsystem_device; + board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) | + subsystem_vendor_id); + + for (i = 0; i < ARRAY_SIZE(products); i++) { + /* Stand aside for hpsa driver on request */ + if (cciss_allow_hpsa && products[i].board_id == HPSA_BOUNDARY) + return -ENODEV; + if (board_id == products[i].board_id) + break; + } + prod_index = i; + if (prod_index == ARRAY_SIZE(products)) { + dev_warn(&pdev->dev, + "unrecognized board ID: 0x%08lx, ignoring.\n", + (unsigned long) board_id); + return -ENODEV; + } /* check to see if controller has been disabled */ /* BEFORE trying to enable it */ @@ -3778,11 +3803,6 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) return err; } - subsystem_vendor_id = pdev->subsystem_vendor; - subsystem_device_id = pdev->subsystem_device; - board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) | - subsystem_vendor_id); - #ifdef CCISS_DEBUG printk("command = %x\n", command); printk("irq = %x\n", pdev->irq); @@ -3868,14 +3888,9 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) * leave a little room for ioctl calls. */ c->max_commands = readl(&(c->cfgtable->CmdsOutMax)); - for (i = 0; i < ARRAY_SIZE(products); i++) { - if (board_id == products[i].board_id) { - c->product_name = products[i].product_name; - c->access = *(products[i].access); - c->nr_cmds = c->max_commands - 4; - break; - } - } + c->product_name = products[prod_index].product_name; + c->access = *(products[prod_index].access); + c->nr_cmds = c->max_commands - 4; if ((readb(&c->cfgtable->Signature[0]) != 'C') || (readb(&c->cfgtable->Signature[1]) != 'I') || (readb(&c->cfgtable->Signature[2]) != 'S') || @@ -3884,27 +3899,6 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) err = -ENODEV; goto err_out_free_res; } - /* We didn't find the controller in our list. We know the - * signature is valid. If it's an HP device let's try to - * bind to the device and fire it up. Otherwise we bail. - */ - if (i == ARRAY_SIZE(products)) { - if (subsystem_vendor_id == PCI_VENDOR_ID_HP) { - c->product_name = products[i-1].product_name; - c->access = *(products[i-1].access); - c->nr_cmds = c->max_commands - 4; - printk(KERN_WARNING "cciss: This is an unknown " - "Smart Array controller.\n" - "cciss: Please update to the latest driver " - "available from www.hp.com.\n"); - } else { - printk(KERN_WARNING "cciss: Sorry, I don't know how" - " to access the Smart Array controller %08lx\n" - , (unsigned long)board_id); - err = -ENODEV; - goto err_out_free_res; - } - } #ifdef CONFIG_X86 { /* Need to enable prefetch in the SCSI core for 6400 in x86 */ @@ -4254,7 +4248,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, mutex_init(&hba[i]->busy_shutting_down); if (cciss_pci_init(hba[i], pdev) != 0) - goto clean0; + goto clean_no_release_regions; sprintf(hba[i]->devname, "cciss%d", i); hba[i]->ctlr = i; @@ -4391,13 +4385,14 @@ clean2: clean1: cciss_destroy_hba_sysfs_entry(hba[i]); clean0: + pci_release_regions(pdev); +clean_no_release_regions: hba[i]->busy_initializing = 0; /* * Deliberately omit pci_disable_device(): it does something nasty to * Smart Array controllers that pci_enable_device does not undo */ - pci_release_regions(pdev); pci_set_drvdata(pdev, NULL); free_hba(i); return -1; diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c index aac0985a572b..31e7c91c2d9d 100644 --- a/drivers/char/genrtc.c +++ b/drivers/char/genrtc.c @@ -43,6 +43,7 @@ #define RTC_VERSION "1.07" #include <linux/module.h> +#include <linux/sched.h> #include <linux/errno.h> #include <linux/miscdevice.h> #include <linux/fcntl.h> diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c index e0d0f8b2696b..bc4ab3e54550 100644 --- a/drivers/char/rtc.c +++ b/drivers/char/rtc.c @@ -74,6 +74,7 @@ #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <linux/spinlock.h> +#include <linux/sched.h> #include <linux/sysctl.h> #include <linux/wait.h> #include <linux/bcd.h> diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index fd3dced97776..8c262aaf7c26 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -36,6 +36,7 @@ */ #include <linux/module.h> +#include <linux/sched.h> #include <linux/input.h> #include <linux/pci.h> #include <linux/init.h> diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index be34d32906bd..7d05c4bb201e 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1066,7 +1066,7 @@ EXPORT_SYMBOL_GPL(hid_report_raw_event); * @type: HID report type (HID_*_REPORT) * @data: report contents * @size: size of data parameter - * @interrupt: called from atomic? + * @interrupt: distinguish between interrupt and control transfers * * This is data entry for lower layers. */ diff --git a/drivers/hid/hid-twinhan.c b/drivers/hid/hid-twinhan.c index b05f602c051e..c40afc57fc8f 100644 --- a/drivers/hid/hid-twinhan.c +++ b/drivers/hid/hid-twinhan.c @@ -132,12 +132,12 @@ static struct hid_driver twinhan_driver = { .input_mapping = twinhan_input_mapping, }; -static int twinhan_init(void) +static int __init twinhan_init(void) { return hid_register_driver(&twinhan_driver); } -static void twinhan_exit(void) +static void __exit twinhan_exit(void) { hid_unregister_driver(&twinhan_driver); } diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index ba05275e5104..cdd136942bca 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -48,10 +48,9 @@ static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, char *report; DECLARE_WAITQUEUE(wait, current); - while (ret == 0) { - - mutex_lock(&list->read_mutex); + mutex_lock(&list->read_mutex); + while (ret == 0) { if (list->head == list->tail) { add_wait_queue(&list->hidraw->wait, &wait); set_current_state(TASK_INTERRUPTIBLE); diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 23e76fe0d359..376f1ab48a24 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -130,7 +130,7 @@ struct mapped_device { /* * A list of ios that arrived while we were suspended. */ - atomic_t pending; + atomic_t pending[2]; wait_queue_head_t wait; struct work_struct work; struct bio_list deferred; @@ -453,13 +453,14 @@ static void start_io_acct(struct dm_io *io) { struct mapped_device *md = io->md; int cpu; + int rw = bio_data_dir(io->bio); io->start_time = jiffies; cpu = part_stat_lock(); part_round_stats(cpu, &dm_disk(md)->part0); part_stat_unlock(); - dm_disk(md)->part0.in_flight = atomic_inc_return(&md->pending); + dm_disk(md)->part0.in_flight[rw] = atomic_inc_return(&md->pending[rw]); } static void end_io_acct(struct dm_io *io) @@ -479,8 +480,9 @@ static void end_io_acct(struct dm_io *io) * After this is decremented the bio must not be touched if it is * a barrier. */ - dm_disk(md)->part0.in_flight = pending = - atomic_dec_return(&md->pending); + dm_disk(md)->part0.in_flight[rw] = pending = + atomic_dec_return(&md->pending[rw]); + pending += atomic_read(&md->pending[rw^0x1]); /* nudge anyone waiting on suspend queue */ if (!pending) @@ -1785,7 +1787,8 @@ static struct mapped_device *alloc_dev(int minor) if (!md->disk) goto bad_disk; - atomic_set(&md->pending, 0); + atomic_set(&md->pending[0], 0); + atomic_set(&md->pending[1], 0); init_waitqueue_head(&md->wait); INIT_WORK(&md->work, dm_wq_work); init_waitqueue_head(&md->eventq); @@ -2088,7 +2091,8 @@ static int dm_wait_for_completion(struct mapped_device *md, int interruptible) break; } spin_unlock_irqrestore(q->queue_lock, flags); - } else if (!atomic_read(&md->pending)) + } else if (!atomic_read(&md->pending[0]) && + !atomic_read(&md->pending[1])) break; if (interruptible == TASK_INTERRUPTIBLE && diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index e424cf6d8e9e..e832e975da60 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -480,7 +480,6 @@ static int add_children(struct twl4030_platform_data *pdata, unsigned long features) { struct device *child; - struct device *usb_transceiver = NULL; if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) { child = add_child(3, "twl4030_bci", @@ -532,16 +531,61 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) } if (twl_has_usb() && pdata->usb) { + + static struct regulator_consumer_supply usb1v5 = { + .supply = "usb1v5", + }; + static struct regulator_consumer_supply usb1v8 = { + .supply = "usb1v8", + }; + static struct regulator_consumer_supply usb3v1 = { + .supply = "usb3v1", + }; + + /* First add the regulators so that they can be used by transceiver */ + if (twl_has_regulator()) { + /* this is a template that gets copied */ + struct regulator_init_data usb_fixed = { + .constraints.valid_modes_mask = + REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .constraints.valid_ops_mask = + REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }; + + child = add_regulator_linked(TWL4030_REG_VUSB1V5, + &usb_fixed, &usb1v5, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator_linked(TWL4030_REG_VUSB1V8, + &usb_fixed, &usb1v8, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator_linked(TWL4030_REG_VUSB3V1, + &usb_fixed, &usb3v1, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + } + child = add_child(0, "twl4030_usb", pdata->usb, sizeof(*pdata->usb), true, /* irq0 = USB_PRES, irq1 = USB */ pdata->irq_base + 8 + 2, pdata->irq_base + 4); + if (IS_ERR(child)) return PTR_ERR(child); /* we need to connect regulators to this transceiver */ - usb_transceiver = child; + if (twl_has_regulator() && child) { + usb1v5.dev = child; + usb1v8.dev = child; + usb3v1.dev = child; + } } if (twl_has_watchdog()) { @@ -580,47 +624,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) return PTR_ERR(child); } - if (twl_has_regulator() && usb_transceiver) { - static struct regulator_consumer_supply usb1v5 = { - .supply = "usb1v5", - }; - static struct regulator_consumer_supply usb1v8 = { - .supply = "usb1v8", - }; - static struct regulator_consumer_supply usb3v1 = { - .supply = "usb3v1", - }; - - /* this is a template that gets copied */ - struct regulator_init_data usb_fixed = { - .constraints.valid_modes_mask = - REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .constraints.valid_ops_mask = - REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }; - - usb1v5.dev = usb_transceiver; - usb1v8.dev = usb_transceiver; - usb3v1.dev = usb_transceiver; - - child = add_regulator_linked(TWL4030_REG_VUSB1V5, &usb_fixed, - &usb1v5, 1); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator_linked(TWL4030_REG_VUSB1V8, &usb_fixed, - &usb1v8, 1); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator_linked(TWL4030_REG_VUSB3V1, &usb_fixed, - &usb3v1, 1); - if (IS_ERR(child)) - return PTR_ERR(child); - } - /* maybe add LDOs that are omitted on cost-reduced parts */ if (twl_has_regulator() && !(features & TPS_SUBSET)) { child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2); diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 5e0b1529964d..b00d67319058 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -693,7 +693,7 @@ static int pxamci_probe(struct platform_device *pdev) if (gpio_is_valid(gpio_ro)) { ret = gpio_request(gpio_ro, "mmc card read only"); if (ret) { - dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_power); + dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro); goto err_gpio_ro; } gpio_direction_input(gpio_ro); @@ -701,7 +701,7 @@ static int pxamci_probe(struct platform_device *pdev) if (gpio_is_valid(gpio_cd)) { ret = gpio_request(gpio_cd, "mmc card detect"); if (ret) { - dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_power); + dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd); goto err_gpio_cd; } gpio_direction_input(gpio_cd); diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c index 9693b0fd323d..0bd898c94759 100644 --- a/drivers/net/wan/c101.c +++ b/drivers/net/wan/c101.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/capability.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/string.h> diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c index 83da596e2052..58c66819f39b 100644 --- a/drivers/net/wan/n2.c +++ b/drivers/net/wan/n2.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/capability.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/fcntl.h> diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c index a52f29c72c33..f1340faaf022 100644 --- a/drivers/net/wan/pci200syn.c +++ b/drivers/net/wan/pci200syn.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/capability.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/fcntl.h> diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 14bbaa17e2ca..22b02c6df854 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -354,6 +354,7 @@ dmar_table_print_dmar_entry(struct acpi_dmar_header *header) struct acpi_dmar_hardware_unit *drhd; struct acpi_dmar_reserved_memory *rmrr; struct acpi_dmar_atsr *atsr; + struct acpi_dmar_rhsa *rhsa; switch (header->type) { case ACPI_DMAR_TYPE_HARDWARE_UNIT: @@ -375,6 +376,12 @@ dmar_table_print_dmar_entry(struct acpi_dmar_header *header) atsr = container_of(header, struct acpi_dmar_atsr, header); printk(KERN_INFO PREFIX "ATSR flags: %#x\n", atsr->flags); break; + case ACPI_DMAR_HARDWARE_AFFINITY: + rhsa = container_of(header, struct acpi_dmar_rhsa, header); + printk(KERN_INFO PREFIX "RHSA base: %#016Lx proximity domain: %#x\n", + (unsigned long long)rhsa->base_address, + rhsa->proximity_domain); + break; } } @@ -459,9 +466,13 @@ parse_dmar_table(void) ret = dmar_parse_one_atsr(entry_header); #endif break; + case ACPI_DMAR_HARDWARE_AFFINITY: + /* We don't do anything with RHSA (yet?) */ + break; default: printk(KERN_WARNING PREFIX - "Unknown DMAR structure type\n"); + "Unknown DMAR structure type %d\n", + entry_header->type); ret = 0; /* for forward compatibility */ break; } diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h index 53836001d511..9c6a9fd26812 100644 --- a/drivers/pci/hotplug/cpqphp.h +++ b/drivers/pci/hotplug/cpqphp.h @@ -32,6 +32,7 @@ #include <asm/io.h> /* for read? and write? functions */ #include <linux/delay.h> /* for delays */ #include <linux/mutex.h> +#include <linux/sched.h> /* for signal_pending() */ #define MY_NAME "cpqphp" diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 855dd7ca47f3..b1e97e682500 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -48,6 +48,7 @@ #define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY) #define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA) +#define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e) #define IOAPIC_RANGE_START (0xfee00000) #define IOAPIC_RANGE_END (0xfeefffff) @@ -94,6 +95,7 @@ static inline unsigned long virt_to_dma_pfn(void *p) /* global iommu list, set NULL for ignored DMAR units */ static struct intel_iommu **g_iommus; +static void __init check_tylersburg_isoch(void); static int rwbf_quirk; /* @@ -1934,6 +1936,9 @@ error: } static int iommu_identity_mapping; +#define IDENTMAP_ALL 1 +#define IDENTMAP_GFX 2 +#define IDENTMAP_AZALIA 4 static int iommu_domain_identity_map(struct dmar_domain *domain, unsigned long long start, @@ -2151,8 +2156,14 @@ static int domain_add_dev_info(struct dmar_domain *domain, static int iommu_should_identity_map(struct pci_dev *pdev, int startup) { - if (iommu_identity_mapping == 2) - return IS_GFX_DEVICE(pdev); + if ((iommu_identity_mapping & IDENTMAP_AZALIA) && IS_AZALIA(pdev)) + return 1; + + if ((iommu_identity_mapping & IDENTMAP_GFX) && IS_GFX_DEVICE(pdev)) + return 1; + + if (!(iommu_identity_mapping & IDENTMAP_ALL)) + return 0; /* * We want to start off with all devices in the 1:1 domain, and @@ -2332,11 +2343,14 @@ int __init init_dmars(void) } if (iommu_pass_through) - iommu_identity_mapping = 1; + iommu_identity_mapping |= IDENTMAP_ALL; + #ifdef CONFIG_DMAR_BROKEN_GFX_WA - else - iommu_identity_mapping = 2; + iommu_identity_mapping |= IDENTMAP_GFX; #endif + + check_tylersburg_isoch(); + /* * If pass through is not set or not enabled, setup context entries for * identity mappings for rmrr, gfx, and isa and may fall back to static @@ -3670,3 +3684,61 @@ static void __devinit quirk_iommu_rwbf(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf); + +/* On Tylersburg chipsets, some BIOSes have been known to enable the + ISOCH DMAR unit for the Azalia sound device, but not give it any + TLB entries, which causes it to deadlock. Check for that. We do + this in a function called from init_dmars(), instead of in a PCI + quirk, because we don't want to print the obnoxious "BIOS broken" + message if VT-d is actually disabled. +*/ +static void __init check_tylersburg_isoch(void) +{ + struct pci_dev *pdev; + uint32_t vtisochctrl; + + /* If there's no Azalia in the system anyway, forget it. */ + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x3a3e, NULL); + if (!pdev) + return; + pci_dev_put(pdev); + + /* System Management Registers. Might be hidden, in which case + we can't do the sanity check. But that's OK, because the + known-broken BIOSes _don't_ actually hide it, so far. */ + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x342e, NULL); + if (!pdev) + return; + + if (pci_read_config_dword(pdev, 0x188, &vtisochctrl)) { + pci_dev_put(pdev); + return; + } + + pci_dev_put(pdev); + + /* If Azalia DMA is routed to the non-isoch DMAR unit, fine. */ + if (vtisochctrl & 1) + return; + + /* Drop all bits other than the number of TLB entries */ + vtisochctrl &= 0x1c; + + /* If we have the recommended number of TLB entries (16), fine. */ + if (vtisochctrl == 0x10) + return; + + /* Zero TLB entries? You get to ride the short bus to school. */ + if (!vtisochctrl) { + WARN(1, "Your BIOS is broken; DMA routed to ISOCH DMAR unit but no TLB space.\n" + "BIOS vendor: %s; Ver: %s; Product Version: %s\n", + dmi_get_system_info(DMI_BIOS_VENDOR), + dmi_get_system_info(DMI_BIOS_VERSION), + dmi_get_system_info(DMI_PRODUCT_VERSION)); + iommu_identity_mapping |= IDENTMAP_AZALIA; + return; + } + + printk(KERN_WARNING "DMAR: Recommended TLB entries for ISOCH unit is 16; your BIOS set %d\n", + vtisochctrl); +} diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6edecff0b419..4e4c295a049f 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -513,7 +513,11 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) else if (state == PCI_D2 || dev->current_state == PCI_D2) udelay(PCI_PM_D2_DELAY); - dev->current_state = state; + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); + if (dev->current_state != state && printk_ratelimit()) + dev_info(&dev->dev, "Refused to change power state, " + "currently in D%d\n", dev->current_state); /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning @@ -2542,10 +2546,10 @@ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type) /** * pci_set_vga_state - set VGA decode state on device and parents if requested - * @dev the PCI device - * @decode - true = enable decoding, false = disable decoding - * @command_bits PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY - * @change_bridge - traverse ancestors and change bridges + * @dev: the PCI device + * @decode: true = enable decoding, false = disable decoding + * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY + * @change_bridge: traverse ancestors and change bridges */ int pci_set_vga_state(struct pci_dev *dev, bool decode, unsigned int command_bits, bool change_bridge) @@ -2719,17 +2723,6 @@ int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev) return 1; } -static int __devinit pci_init(void) -{ - struct pci_dev *dev = NULL; - - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - pci_fixup_device(pci_fixup_final, dev); - } - - return 0; -} - static int __init pci_setup(char *str) { while (str) { @@ -2767,8 +2760,6 @@ static int __init pci_setup(char *str) } early_param("pci", pci_setup); -device_initcall(pci_init); - EXPORT_SYMBOL(pci_reenable_device); EXPORT_SYMBOL(pci_enable_device_io); EXPORT_SYMBOL(pci_enable_device_mem); diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index d49ecc94bd49..40c3cc5d1caf 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -53,7 +53,7 @@ static struct pci_error_handlers aer_error_handlers = { static struct pcie_port_service_driver aerdriver = { .name = "aer", - .port_type = PCIE_ANY_PORT, + .port_type = PCIE_RC_PORT, .service = PCIE_PORT_SERVICE_AER, .probe = aer_probe, diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 6df5c984a791..f635e476d632 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -30,7 +30,6 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); /* global data */ -static const char device_name[] = "pcieport-driver"; static int pcie_portdrv_restore_config(struct pci_dev *dev) { @@ -262,7 +261,7 @@ static struct pci_error_handlers pcie_portdrv_err_handler = { }; static struct pci_driver pcie_portdriver = { - .name = (char *)device_name, + .name = "pcieport", .id_table = &port_pci_ids[0], .probe = pcie_portdrv_probe, diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 6099facecd79..a790b1771f9f 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -670,6 +670,25 @@ static void __devinit quirk_vt8235_acpi(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); +/* + * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back: + * Disable fast back-to-back on the secondary bus segment + */ +static void __devinit quirk_xio2000a(struct pci_dev *dev) +{ + struct pci_dev *pdev; + u16 command; + + dev_warn(&dev->dev, "TI XIO2000a quirk detected; " + "secondary bus fast back-to-back transfers disabled\n"); + list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) { + pci_read_config_word(pdev, PCI_COMMAND, &command); + if (command & PCI_COMMAND_FAST_BACK) + pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A, + quirk_xio2000a); #ifdef CONFIG_X86_IO_APIC @@ -2572,6 +2591,19 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) } pci_do_fixups(dev, start, end); } + +static int __init pci_apply_final_quirks(void) +{ + struct pci_dev *dev = NULL; + + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + pci_fixup_device(pci_fixup_final, dev); + } + + return 0; +} + +fs_initcall_sync(pci_apply_final_quirks); #else void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} #endif diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index cb1a027eb552..0959430534b2 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -299,8 +299,17 @@ static struct resource *find_free_bus_resource(struct pci_bus *bus, unsigned lon r = bus->resource[i]; if (r == &ioport_resource || r == &iomem_resource) continue; - if (r && (r->flags & type_mask) == type && !r->parent) - return r; + if (r && (r->flags & type_mask) == type) { + if (!r->parent) + return r; + /* + * if there is no child under that, we should release + * and use it. don't need to reset it, pbus_size_* will + * set it again + */ + if (!r->child && !release_resource(r)) + return r; + } } return NULL; } diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 706f82d8111f..c54526b206b5 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -205,43 +205,6 @@ int pci_assign_resource(struct pci_dev *dev, int resno) return ret; } -#if 0 -int pci_assign_resource_fixed(struct pci_dev *dev, int resno) -{ - struct pci_bus *bus = dev->bus; - struct resource *res = dev->resource + resno; - unsigned int type_mask; - int i, ret = -EBUSY; - - type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH; - - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *r = bus->resource[i]; - if (!r) - continue; - - /* type_mask must match */ - if ((res->flags ^ r->flags) & type_mask) - continue; - - ret = request_resource(r, res); - - if (ret == 0) - break; - } - - if (ret) { - dev_err(&dev->dev, "BAR %d: can't allocate %s resource %pR\n", - resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", res); - } else if (resno < PCI_BRIDGE_RESOURCES) { - pci_update_resource(dev, resno); - } - - return ret; -} -EXPORT_SYMBOL_GPL(pci_assign_resource_fixed); -#endif - /* Sort resources by alignment */ void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head) { diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 1689bda1d13b..dcc72444e8e7 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1270,6 +1270,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp) BUG_ON(!kernel_locked()); + if (!state) + return; + uport = state->uart_port; port = &state->port; @@ -1316,9 +1319,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp) */ if (port->flags & ASYNC_INITIALIZED) { unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + spin_lock_irqsave(&uport->lock, flags); uport->ops->stop_rx(uport); - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock_irqrestore(&uport->lock, flags); /* * Before we drop DTR, make sure the UART transmitter * has completely drained; this is especially diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 958a3ffc8987..ff5bbb9c43c9 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -1826,7 +1826,7 @@ static struct amba_id pl022_ids[] = { * ST Micro derivative, this has 32bit wide * and 32 locations deep TX/RX FIFO */ - .id = 0x00108022, + .id = 0x01080022, .mask = 0xffffffff, .data = &vendor_st, }, diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 760e7271d17b..b84abd8ee8a5 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -9,7 +9,7 @@ comment "Enable Host or Gadget support to see Inventra options" # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller config USB_MUSB_HDRC depends on (USB || USB_GADGET) - depends on !SUPERH + depends on (ARM || BLACKFIN) select NOP_USB_XCEIV if ARCH_DAVINCI select TWL4030_USB if MACH_OMAP_3430SDP select NOP_USB_XCEIV if MACH_OMAP3EVM |