Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "New core SoC-specific changes.

  New platforms:
   * Introduction of a vendor, Hisilicon, and one of their SoCs with
     some random numerical product name.
   * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m,
     i.e. !MMU).
   * Marvell Berlin series of SoCs, which include the one in Chromecast.
   * MOXA platform support, ARM9-based platform used mostly in
     industrial products
   * Support for Freescale's i.MX50 SoC.

  Other work:
   * Renesas work for new platforms and drivers, and conversion over to
     more multiplatform-friendly device registration schemes.
   * SMP support for Allwinner sunxi platforms.
   * ... plus a bunch of other stuff across various platforms"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits)
  ARM: tegra: fix tegra_powergate_sequence_power_up() inline
  ARM: msm_defconfig: Update for multi-platform
  ARM: msm: Move MSM's DT based hardware to multi-platform support
  ARM: msm: Only build timer.c if required
  ARM: msm: Only build clock.c on proc_comm based platforms
  ARM: ux500: Enable system suspend with WFI support
  ARM: ux500: turn on PRINTK_TIME in u8500_defconfig
  ARM: shmobile: r8a7790: Fix I2C controller names
  ARM: msm: Simplify ARCH_MSM_DT config
  ARM: msm: Add support for MSM8974 SoC
  ARM: sunxi: select ARM_PSCI
  MAINTAINERS: Update Allwinner sunXi maintainer files
  ARM: sunxi: Select RESET_CONTROLLER
  ARM: imx: improve the comment of CCM lpm SW workaround
  ARM: imx: improve status check of clock gate
  ARM: imx: add necessary interface for pfd
  ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100
  ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support
  ARM: imx: Add cpu frequency scaling support
  ARM i.MX35: Add devicetree support.
  ...

2 files changed, 15 insertions, 29 deletions

diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
index 29da84e183f4..42b823cd2d22 100644
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@@ -43,6 +43,14 @@
 #define IMX35_UART_BASE_ADDR(n)	IMX35_UART##n##_BASE_ADDR
 #define IMX35_UART_BASE(n)	IMX35_UART_BASE_ADDR(n)
 
+#define IMX50_UART1_BASE_ADDR	0x53fbc000
+#define IMX50_UART2_BASE_ADDR	0x53fc0000
+#define IMX50_UART3_BASE_ADDR	0x5000c000
+#define IMX50_UART4_BASE_ADDR	0x53ff0000
+#define IMX50_UART5_BASE_ADDR	0x63f90000
+#define IMX50_UART_BASE_ADDR(n)	IMX50_UART##n##_BASE_ADDR
+#define IMX50_UART_BASE(n)	IMX50_UART_BASE_ADDR(n)
+
 #define IMX51_UART1_BASE_ADDR	0x73fbc000
 #define IMX51_UART2_BASE_ADDR	0x73fc0000
 #define IMX51_UART3_BASE_ADDR	0x7000c000
@@ -85,6 +93,8 @@
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX31)
 #elif defined(CONFIG_DEBUG_IMX35_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX35)
+#elif defined(CONFIG_DEBUG_IMX50_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX50)
 #elif defined(CONFIG_DEBUG_IMX51_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX51)
 #elif defined(CONFIG_DEBUG_IMX53_UART)
diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S
index be6a720dd183..f98763f0bc17 100644
--- a/arch/arm/include/debug/tegra.S
+++ b/arch/arm/include/debug/tegra.S
@@ -46,10 +46,10 @@
 #define TEGRA_APB_MISC_GP_HIDREV	(TEGRA_APB_MISC_BASE + 0x804)
 
 /*
- * Must be 1MB-aligned since a 1MB mapping is used early on.
+ * Must be section-aligned since a section mapping is used early on.
  * Must not overlap with regions in mach-tegra/io.c:tegra_io_desc[].
  */
-#define UART_VIRTUAL_BASE		0xfe100000
+#define UART_VIRTUAL_BASE		0xfe800000
 
 #define checkuart(rp, rv, lhu, bit, uart) \
 		/* Load address of CLK_RST register */ \
@@ -156,28 +156,6 @@
 92:		and	\rv, \rp, #0xffffff	@ offset within 1MB section
 		add	\rv, \rv, #UART_VIRTUAL_BASE
 		str	\rv, [\tmp, #8]		@ Store in tegra_uart_virt
-		movw	\rv, #TEGRA_APB_MISC_GP_HIDREV & 0xffff
-		movt	\rv, #TEGRA_APB_MISC_GP_HIDREV >> 16
-		ldr	\rv, [\rv, #0]		@ Load HIDREV
-		ubfx	\rv, \rv, #8, #8	@ 15:8 are SoC version
-		cmp	\rv, #0x20		@ Tegra20?
-		moveq	\rv, #0x75		@ Tegra20 divisor
-		movne	\rv, #0xdd		@ Tegra30 divisor
-		str	\rv, [\tmp, #12]	@ Save divisor to scratch
-		/* uart[UART_LCR] = UART_LCR_WLEN8 | UART_LCR_DLAB; */
-		mov	\rv, #UART_LCR_WLEN8 | UART_LCR_DLAB
-		str	\rv, [\rp, #UART_LCR << UART_SHIFT]
-		/* uart[UART_DLL] = div & 0xff; */
-		ldr	\rv, [\tmp, #12]
-		and	\rv, \rv, #0xff
-		str	\rv, [\rp, #UART_DLL << UART_SHIFT]
-		/* uart[UART_DLM] = div >> 8; */
-		ldr	\rv, [\tmp, #12]
-		lsr	\rv, \rv, #8
-		str	\rv, [\rp, #UART_DLM << UART_SHIFT]
-		/* uart[UART_LCR] = UART_LCR_WLEN8; */
-		mov	\rv, #UART_LCR_WLEN8
-		str	\rv, [\rp, #UART_LCR << UART_SHIFT]
 		b	100f
 
 		.align
@@ -205,8 +183,8 @@
 		cmp	\rx, #0
 		beq	1002f
 1001:		ldrb	\rd, [\rx, #UART_LSR << UART_SHIFT]
-		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
-		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		and	\rd, \rd, #UART_LSR_THRE
+		teq	\rd, #UART_LSR_THRE
 		bne	1001b
 1002:
 		.endm
@@ -225,7 +203,7 @@
 /*
  * Storage for the state maintained by the macros above.
  *
- * In the kernel proper, this data is located in arch/arm/mach-tegra/common.c.
+ * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c.
  * That's because this header is included from multiple files, and we only
  * want a single copy of the data. In particular, the UART probing code above
  * assumes it's running using physical addresses. This is true when this file
@@ -247,6 +225,4 @@ tegra_uart_config:
 	.word 0
 	/* Debug UART virtual address */
 	.word 0
-	/* Scratch space for debug macro */
-	.word 0
 #endif