Merge branch 'imx/dt' into for-next

15 files changed, 163 insertions, 1 deletions

diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index f607ce520eda..7a6d21fb6e6e 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -19,18 +19,91 @@
 	memory {
 		reg = <0x80000000 0x4000000>;
 	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_fec_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "fec-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 3 0>;
+			enable-active-high;
+		};
+	};
 };
 
-&uart1 {
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio2 1 0>;
+	wp-gpios = <&gpio2 0 0>;
 	status = "okay";
 };
 
 &fec {
 	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-supply = <&reg_fec_3v3>;
+	phy-reset-gpios = <&gpio4 8 0>;
 	status = "okay";
 };
 
+&iomuxc {
+	imx25-pdk {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX25_PAD_SD1_CMD__SD1_CMD		0x80000000
+				MX25_PAD_SD1_CLK__SD1_CLK		0x80000000
+				MX25_PAD_SD1_DATA0__SD1_DATA0		0x80000000
+				MX25_PAD_SD1_DATA1__SD1_DATA1		0x80000000
+				MX25_PAD_SD1_DATA2__SD1_DATA2		0x80000000
+				MX25_PAD_SD1_DATA3__SD1_DATA3		0x80000000
+				MX25_PAD_A14__GPIO_2_0			0x80000000
+				MX25_PAD_A15__GPIO_2_1			0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
+				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
+				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
+				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
+				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
+				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
+				MX25_PAD_A17__GPIO_2_3			0x80000000
+				MX25_PAD_D12__GPIO_4_8			0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
+				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
+				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
+				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
+			>;
+		};
+	};
+};
+
 &nfc {
 	nand-on-flash-bbt;
 	status = "okay";
 };
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 32f760e24898..77bb743a37e7 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -14,6 +14,7 @@
 
 / {
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index df3b2e731835..86510ede7ee2 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -15,6 +15,7 @@
 };
 
 &cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
 	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
 		   <&gpio4 27 GPIO_ACTIVE_LOW>;
@@ -36,6 +37,12 @@
 
 &iomuxc {
 	imx27_phycore_rdk {
+		pinctrl_cspi1cs1: cspi1cs1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+			>;
+		};
+
 		pinctrl_i2c1: i2c1grp {
 			/* Add pullup to DATA line */
 			fsl,pins = <
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
index cefaa6994623..8e10aeff946e 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -251,6 +251,15 @@
 			>;
 		};
 
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX27_PAD_SSI1_FS__SSI1_FS 0x0
+				MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
+				MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
+				MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
+			>;
+		};
+
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
@@ -279,6 +288,13 @@
 	status = "okay";
 };
 
+&ssi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
 &usbotg {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg>;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 6279e0b4f768..83a82473257c 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -16,6 +16,7 @@
 
 / {
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
index 1bdec21f4533..71197b926353 100644
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -46,6 +46,14 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx35-eukrea-tlv320aic23";
+		ssi-controller = <&ssi1>;
+		fsl,mux-int-port = <1>;
+		fsl,mux-ext-port = <4>;
+	};
 };
 
 &audmux {
@@ -124,6 +132,7 @@
 };
 
 &ssi1 {
+	codec-handle = <&tlv320aic23>;
 	fsl,mode = "i2s-slave";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 88b218f8f810..e59ccb4d98e3 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -13,6 +13,7 @@
 
 / {
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 0c75fe3deb35..c24906477a98 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -17,6 +17,7 @@
 
 / {
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index e4b07d1a9a56..e508e6f9a1eb 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -19,6 +19,7 @@
 
 / {
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 80615dfa2177..5f382ea0bf5d 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -18,6 +18,7 @@
 
 / {
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 0d816d3be4b6..7a88d9ae8daa 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -105,6 +105,17 @@
 		default-brightness-level = <7>;
 		status = "okay";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		red {
+		        gpios = <&gpio1 2 0>;
+		        default-state = "on";
+		};
+	};
 };
 
 &audmux {
@@ -422,6 +433,14 @@
 			>;
 		};
 	};
+
+	gpio_leds {
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
+			>;
+		};
+	};
 };
 
 &ldb {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 4fef49f1856e..af8d28d447c8 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -16,6 +16,7 @@
 
 / {
 	aliases {
+		ethernet0 = &fec;
 		can0 = &can1;
 		can1 = &can2;
 		gpio0 = &gpio1;
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 3cb4941afeef..64774478b2d8 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -14,6 +14,7 @@
 
 / {
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index 7dd1d6ede525..f3af8ea7ef29 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -111,6 +111,13 @@
 	};
 };
 
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &fec0 {
 	phy-mode = "rmii";
 	pinctrl-names = "default";
@@ -158,6 +165,18 @@
 			>;
 		};
 
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTA7__GPIO_134	0x219d
+			>;
+		};
+
 		pinctrl_fec0: fec0grp {
 			fsl,pins = <
 				VF610_PAD_PTA6__RMII_CLKIN		0x30d1
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 804873367669..acf544eba187 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -347,6 +347,17 @@
 				status = "disabled";
 			};
 
+			esdhc1: esdhc@400b2000 {
+				compatible = "fsl,imx53-esdhc";
+				reg = <0x400b2000 0x4000>;
+				interrupts = <0 28 0x04>;
+				clocks = <&clks VF610_CLK_IPG_BUS>,
+					<&clks VF610_CLK_PLATFORM_BUS>,
+					<&clks VF610_CLK_ESDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
 			fec0: ethernet@400d0000 {
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d0000 0x1000>;