aboutsummaryrefslogtreecommitdiff
path: root/board/armadeus/apf27/lowlevel_init.S
blob: 4293cb1080035cf149fa7b3a6992093f79bfd53d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
/*
 * (C) Copyright 2013 Philippe Reynes <tremyfr@yahoo.fr>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <config.h>
#include <generated/asm-offsets.h>
#include <version.h>
#include <asm/macro.h>
#include <asm/arch/imx-regs.h>
#include "apf27.h"

	.macro init_aipi
	/*
	 * setup AIPI1 and AIPI2
	 */
	write32 AIPI1_PSR0, ACFG_AIPI1_PSR0_VAL
	write32 AIPI1_PSR1, ACFG_AIPI1_PSR1_VAL
	write32 AIPI2_PSR0, ACFG_AIPI2_PSR0_VAL
	write32 AIPI2_PSR1, ACFG_AIPI2_PSR1_VAL

	/* Change SDRAM signal strengh */
	ldr r0, =GPCR
	ldr r1, =ACFG_GPCR_VAL
	ldr r5, [r0]
	orr r5, r5, r1
	str r5, [r0]

	.endm /* init_aipi */

	.macro init_clock
	ldr r0, =CSCR
	/* disable MPLL/SPLL first */
	ldr r1, [r0]
	bic r1, r1, #(CSCR_MPEN|CSCR_SPEN)
	str r1, [r0]

 	/*
	 * pll clock initialization predefined in apf27.h
	 */
	write32 MPCTL0, ACFG_MPCTL0_VAL
	write32 SPCTL0, ACFG_SPCTL0_VAL

	write32 CSCR, ACFG_CSCR_VAL|CSCR_MPLL_RESTART|CSCR_SPLL_RESTART

	/*
	 * add some delay here
	 */
	mov r1, #0x1000
	1:  subs r1, r1, #0x1
	bne 1b

	/* peripheral clock divider */
	write32 PCDR0, ACFG_PCDR0_VAL
	write32 PCDR1, ACFG_PCDR1_VAL

	/* Configure PCCR0 and PCCR1 */
	write32 PCCR0, ACFG_PCCR0_VAL
	write32 PCCR1, ACFG_PCCR1_VAL

	.endm /* init_clock */

	.macro init_ddr
	/* wait for SDRAM/LPDDR ready (SDRAMRDY) */
	ldr		r0, =IMX_ESD_BASE
	ldr		r4, =ESDMISC_SDRAM_RDY
2:	ldr		r1, [r0, #ESDMISC_ROF]
	ands		r1, r1, r4
	bpl		2b

	/* LPDDR Soft Reset Mobile/Low Power DDR SDRAM. */
	ldr		r0, =IMX_ESD_BASE
	ldr		r4, =ACFG_ESDMISC_VAL
	orr		r1, r4, #ESDMISC_MDDR_DL_RST
	str		r1, [r0, #ESDMISC_ROF]

	/* Hold for more than 200ns */
	ldr		r1, =0x10000
1:	subs		r1, r1, #0x1
	bne		1b

	str		r4, [r0]

	ldr		r0, =IMX_ESD_BASE
	ldr		r1, =ACFG_SDRAM_ESDCFG_REGISTER_VAL
	str		r1, [r0, #ESDCFG0_ROF]

	ldr		r0, =IMX_ESD_BASE
	ldr		r1, =ACFG_PRECHARGE_CMD
	str		r1, [r0, #ESDCTL0_ROF]

	/* write8(0xA0001000, any value) */
	ldr		r1, =PHYS_SDRAM_1+ACFG_SDRAM_PRECHARGE_ALL_VAL
	strb		r2, [r1]

	ldr		r1, =ACFG_AUTOREFRESH_CMD
	str		r1, [r0, #ESDCTL0_ROF]

	ldr 		r4, =PHYS_SDRAM_1	/* CSD0 base address	*/

	ldr 		r6,=0x7		/* load loop counter	*/
1:	str 		r5,[r4]		/* run auto-refresh cycle to array 0 */
	subs 		r6,r6,#1
	bne 1b

	ldr		r1, =ACFG_SET_MODE_REG_CMD
	str		r1, [r0, #ESDCTL0_ROF]

	/* set standard mode register */
	ldr		r4, = PHYS_SDRAM_1+ACFG_SDRAM_MODE_REGISTER_VAL
	strb		r2, [r4]

	/* set extended mode register */
	ldr		r4, =PHYS_SDRAM_1+ACFG_SDRAM_EXT_MODE_REGISTER_VAL
	strb		r5, [r4]

	ldr		r1, =ACFG_NORMAL_RW_CMD
	str		r1, [r0, #ESDCTL0_ROF]

	/* 2nd sdram */
	ldr		r0, =IMX_ESD_BASE
	ldr		r1, =ACFG_SDRAM_ESDCFG_REGISTER_VAL
	str		r1, [r0, #ESDCFG1_ROF]

	ldr		r0, =IMX_ESD_BASE
	ldr		r1, =ACFG_PRECHARGE_CMD
	str		r1, [r0, #ESDCTL1_ROF]

	/* write8(0xB0001000, any value) */
	ldr		r1, =PHYS_SDRAM_2+ACFG_SDRAM_PRECHARGE_ALL_VAL
	strb		r2, [r1]

	ldr		r1, =ACFG_AUTOREFRESH_CMD
	str		r1, [r0, #ESDCTL1_ROF]

	ldr 		r4, =PHYS_SDRAM_2	/* CSD1 base address */

	ldr 		r6,=0x7		/* load loop counter */
1:	str 		r5,[r4]		/* run auto-refresh cycle to array 0 */
	subs 		r6,r6,#1
	bne 1b

	ldr		r1, =ACFG_SET_MODE_REG_CMD
	str		r1, [r0, #ESDCTL1_ROF]

	/* set standard mode register */
	ldr		r4, =PHYS_SDRAM_2+ACFG_SDRAM_MODE_REGISTER_VAL
	strb		r2, [r4]

	/* set extended mode register */
	ldr		r4, =PHYS_SDRAM_2+ACFG_SDRAM_EXT_MODE_REGISTER_VAL
	strb		r2, [r4]

	ldr		r1, =ACFG_NORMAL_RW_CMD
	str		r1, [r0, #ESDCTL1_ROF]
	.endm /* init_ddr */

.globl lowlevel_init
lowlevel_init:

	init_aipi
	init_clock
#ifdef CONFIG_SPL_BUILD
	init_ddr
#endif

	mov	pc, lr