aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2023-07-10vdpa: Allow VIRTIO_NET_F_CTRL_RX_EXTRA in SVQHawkins Jiawei
Enable SVQ with VIRTIO_NET_F_CTRL_RX_EXTRA feature. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <15ecc49975f9b8d1316ed4296879564a18abf31e.1688797728.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Restore packet receive filtering state relative with _F_CTRL_RX_EXTRA ↵Hawkins Jiawei
feature This patch refactors vhost_vdpa_net_load_rx() to restore the packet receive filtering state in relation to VIRTIO_NET_F_CTRL_RX_EXTRA feature at device's startup. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <abddc477a476f756de6e3d24c0e9f7b21c99a4c1.1688797728.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Allow VIRTIO_NET_F_CTRL_RX in SVQHawkins Jiawei
Enable SVQ with VIRTIO_NET_F_CTRL_RX feature. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <5d6173a6d7c4c514c98362b404c019f52d73b06c.1688743107.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Avoid forwarding large CVQ command failuresHawkins Jiawei
Due to the size limitation of the out buffer sent to the vdpa device, which is determined by vhost_vdpa_net_cvq_cmd_len(), excessive CVQ command is truncated in QEMU. As a result, the vdpa device rejects this flawd CVQ command. However, the problem is that, the VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command has a variable length, which may exceed vhost_vdpa_net_cvq_cmd_len() if the guest sets more than `MAC_TABLE_ENTRIES` MAC addresses for the filter table. This patch solves this problem by following steps: * Increase the out buffer size to vhost_vdpa_net_cvq_cmd_page_len(), which represents the size of the buffer that is allocated and mmaped. This ensures that everything works correctly as long as the guest sets fewer than `(vhost_vdpa_net_cvq_cmd_page_len() - sizeof(struct virtio_net_ctrl_hdr) - 2 * sizeof(struct virtio_net_ctrl_mac)) / ETH_ALEN` MAC addresses. Considering the highly unlikely scenario for the guest setting more than that number of MAC addresses for the filter table, this should work fine for the majority of cases. * If the CVQ command exceeds vhost_vdpa_net_cvq_cmd_page_len(), instead of directly sending this CVQ command, QEMU should send a VIRTIO_NET_CTRL_RX_PROMISC CVQ command to vdpa device. Addtionally, a fake VIRTIO_NET_CTRL_MAC_TABLE_SET command including (`MAC_TABLE_ENTRIES` + 1) non-multicast MAC addresses and (`MAC_TABLE_ENTRIES` + 1) multicast MAC addresses should be provided to the device model. By doing so, the vdpa device turns promiscuous mode on, aligning with the VirtIO standard. The device model marks `n->mac_table.uni_overflow` and `n->mac_table.multi_overflow`, which aligns with the state of the vdpa device. Note that the bug cannot be triggered at the moment, since VIRTIO_NET_F_CTRL_RX feature is not enabled for SVQ. Fixes: 7a7f87e94c ("vdpa: Move command buffers map to start of net device") Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <267e15e4eed2d7aeb9887f193da99a13d22a2f1d.1688743107.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Accessing CVQ header through its structureHawkins Jiawei
We can access the CVQ header through `struct virtio_net_ctrl_hdr`, instead of accessing it through a `uint8_t` pointer, which improves the code's readability and maintainability. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <cd522e06a4371e9d6b8a1c1a86f90a92401d56e8.1688743107.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Restore packet receive filtering state relative with _F_CTRL_RX featureHawkins Jiawei
This patch introduces vhost_vdpa_net_load_rx_mode() and vhost_vdpa_net_load_rx() to restore the packet receive filtering state in relation to VIRTIO_NET_F_CTRL_RX feature at device's startup. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <804cedac93e19ba3b810d52b274ca5ec11469f09.1688743107.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Restore MAC address filtering stateHawkins Jiawei
This patch refactors vhost_vdpa_net_load_mac() to restore the MAC address filtering state at device's startup. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <4b9550c14bc8c98c8f48e04dbf3d3ac41489d3fd.1688743107.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Use iovec for vhost_vdpa_net_load_cmd()Hawkins Jiawei
According to VirtIO standard, "The driver MUST follow the VIRTIO_NET_CTRL_MAC_TABLE_SET command by a le32 number, followed by that number of non-multicast MAC addresses, followed by another le32 number, followed by that number of multicast addresses." Considering that these data is not stored in contiguous memory, this patch refactors vhost_vdpa_net_load_cmd() to accept scattered data, eliminating the need for an addtional data copy or packing the data into s->cvq_cmd_out_buffer outside of vhost_vdpa_net_load_cmd(). Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <3482cc50eebd13db4140b8b5dec9d0cc25b20b1b.1688743107.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Fix possible use-after-free for VirtQueueElementHawkins Jiawei
QEMU uses vhost_handle_guest_kick() to forward guest's available buffers to the vdpa device in SVQ avail ring. In vhost_handle_guest_kick(), a `g_autofree` `elem` is used to iterate through the available VirtQueueElements. This `elem` is then passed to `svq->ops->avail_handler`, specifically to the vhost_vdpa_net_handle_ctrl_avail(). If this handler fails to process the CVQ command, vhost_handle_guest_kick() regains ownership of the `elem`, and either frees it or requeues it. Yet the problem is that, vhost_vdpa_net_handle_ctrl_avail() mistakenly frees the `elem`, even if it fails to forward the CVQ command to vdpa device. This can result in a use-after-free for the `elem` in vhost_handle_guest_kick(). This patch solves this problem by refactoring vhost_vdpa_net_handle_ctrl_avail() to only freeing the `elem` if it owns it. Fixes: bd907ae4b0 ("vdpa: manual forward CVQ buffers") Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <e3f2d7db477734afe5c6a5ab3fa8b8317514ea34.1688746840.git.yin31149@gmail.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Return -EIO if device ack is VIRTIO_NET_ERR in _load_offloads()Hawkins Jiawei
According to VirtIO standard, "The class, command and command-specific-data are set by the driver, and the device sets the ack byte. There is little it can do except issue a diagnostic if ack is not VIRTIO_NET_OK." Therefore, QEMU should stop sending the queued SVQ commands and cancel the device startup if the device's ack is not VIRTIO_NET_OK. Yet the problem is that, vhost_vdpa_net_load_offloads() returns 1 based on `*s->status != VIRTIO_NET_OK` when the device's ack is VIRTIO_NET_ERR. As a result, net->nc->info->load() also returns 1, this makes vhost_net_start_one() incorrectly assume the device state is successfully loaded by vhost_vdpa_net_load() and return 0, instead of goto `fail` label to cancel the device startup, as vhost_net_start_one() only cancels the device startup when net->nc->info->load() returns a negative value. This patch fixes this problem by returning -EIO when the device's ack is not VIRTIO_NET_OK. Fixes: 0b58d3686a ("vdpa: Add vhost_vdpa_net_load_offloads()") Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <b0396b80e96322b86f1a0b10c098fc1edd947d72.1688438055.git.yin31149@gmail.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Return -EIO if device ack is VIRTIO_NET_ERR in _load_mq()Hawkins Jiawei
According to VirtIO standard, "The class, command and command-specific-data are set by the driver, and the device sets the ack byte. There is little it can do except issue a diagnostic if ack is not VIRTIO_NET_OK." Therefore, QEMU should stop sending the queued SVQ commands and cancel the device startup if the device's ack is not VIRTIO_NET_OK. Yet the problem is that, vhost_vdpa_net_load_mq() returns 1 based on `*s->status != VIRTIO_NET_OK` when the device's ack is VIRTIO_NET_ERR. As a result, net->nc->info->load() also returns 1, this makes vhost_net_start_one() incorrectly assume the device state is successfully loaded by vhost_vdpa_net_load() and return 0, instead of goto `fail` label to cancel the device startup, as vhost_net_start_one() only cancels the device startup when net->nc->info->load() returns a negative value. This patch fixes this problem by returning -EIO when the device's ack is not VIRTIO_NET_OK. Fixes: f64c7cda69 ("vdpa: Add vhost_vdpa_net_load_mq") Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <ec515ebb0b4f56368751b9e318e245a5d994fa72.1688438055.git.yin31149@gmail.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Return -EIO if device ack is VIRTIO_NET_ERR in _load_mac()Hawkins Jiawei
According to VirtIO standard, "The class, command and command-specific-data are set by the driver, and the device sets the ack byte. There is little it can do except issue a diagnostic if ack is not VIRTIO_NET_OK." Therefore, QEMU should stop sending the queued SVQ commands and cancel the device startup if the device's ack is not VIRTIO_NET_OK. Yet the problem is that, vhost_vdpa_net_load_mac() returns 1 based on `*s->status != VIRTIO_NET_OK` when the device's ack is VIRTIO_NET_ERR. As a result, net->nc->info->load() also returns 1, this makes vhost_net_start_one() incorrectly assume the device state is successfully loaded by vhost_vdpa_net_load() and return 0, instead of goto `fail` label to cancel the device startup, as vhost_net_start_one() only cancels the device startup when net->nc->info->load() returns a negative value. This patch fixes this problem by returning -EIO when the device's ack is not VIRTIO_NET_OK. Fixes: f73c0c43ac ("vdpa: extract vhost_vdpa_net_load_mac from vhost_vdpa_net_load") Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <a21731518644abbd0c495c5b7960527c5911f80d.1688438055.git.yin31149@gmail.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-08vdpa: Sort vdpa_feature_bits array alphabeticallyHawkins Jiawei
This patch sorts the vdpa_feature_bits array alphabetically in ascending order to avoid future duplicates. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-07-08vdpa: Delete duplicated VIRTIO_NET_F_RSS in vdpa_feature_bitsHawkins Jiawei
This entry was duplicated on referenced commit. Removing it. Fixes: 402378407dbd ("vhost-vdpa: multiqueue support") Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-07-07net: socket: remove net_init_socket()Laurent Vivier
Move the file descriptor type checking before doing anything with it. If it's not usable, don't close it as it could be in use by another part of QEMU, only fail and report an error. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-07-07net: socket: move fd type checking to its own functionLaurent Vivier
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-07-07net: socket: prepare to cleanup net_init_socket()Laurent Vivier
Use directly net_socket_fd_init_stream() and net_socket_fd_init_dgram() when the socket type is already known. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-06-26vhost-vdpa: do not cleanup the vdpa/vhost-net structures if peer nic is presentAni Sinha
When a peer nic is still attached to the vdpa backend, it is too early to free up the vhost-net and vdpa structures. If these structures are freed here, then QEMU crashes when the guest is being shut down. The following call chain would result in an assertion failure since the pointer returned from vhost_vdpa_get_vhost_net() would be NULL: do_vm_stop() -> vm_state_notify() -> virtio_set_status() -> virtio_net_vhost_status() -> get_vhost_net(). Therefore, we defer freeing up the structures until at guest shutdown time when qemu_cleanup() calls net_cleanup() which then calls qemu_del_net_client() which would eventually call vhost_vdpa_cleanup() again to free up the structures. This time, the loop in net_cleanup() ensures that vhost_vdpa_cleanup() will be called one last time when all the peer nics are detached and freed. All unit tests pass with this change. CC: imammedo@redhat.com CC: jusual@redhat.com CC: mst@redhat.com Fixes: CVE-2023-3301 Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2128929 Signed-off-by: Ani Sinha <anisinha@redhat.com> Message-Id: <20230619065209.442185-1-anisinha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26vdpa: fix not using CVQ buffer in case of errorEugenio Pérez
Bug introducing when refactoring. Otherway, the guest never received the used buffer. Fixes: be4278b65fc1 ("vdpa: extract vhost_vdpa_net_cvq_add from vhost_vdpa_net_handle_ctrl_avail") Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230602173451.1917999-1-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
2023-06-26vdpa: mask _F_CTRL_GUEST_OFFLOADS for vhost vdpa devicesEugenio Pérez
QEMU does not emulate it so it must be disabled as long as the backend does not support it. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230602173328.1917385-1-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
2023-06-26vdpa: Allow VIRTIO_NET_F_CTRL_GUEST_OFFLOADS in SVQHawkins Jiawei
Enable SVQ with VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <778d642ecae6deed8a218b0e6232e4d7bb96b439.1685704856.git.yin31149@gmail.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Tested-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26vdpa: Add vhost_vdpa_net_load_offloads()Hawkins Jiawei
This patch introduces vhost_vdpa_net_load_offloads() to restore offloads state at device's startup. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <7e2b5cad9c48c917df53d80dec27dbfeb513e1a3.1685704856.git.yin31149@gmail.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Tested-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26vdpa: reuse virtio_vdev_has_feature()Hawkins Jiawei
We can use virtio_vdev_has_feature() instead of manually accessing the features. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <ff838d30206209fd865511b16ffb34cc0d5e8d8f.1685704856.git.yin31149@gmail.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Tested-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26vdpa: map shadow vrings with MAP_SHAREDEugenio Pérez
The vdpa devices that use va addresses neeeds these maps shared. Otherwise, vhost_vdpa checks will refuse to accept the maps. The mmap call will always return a page aligned address, so removing the qemu_memalign call. Keeping the ROUND_UP for the size as we still need to DMA-map them in full. Not applying fixes tag as it never worked with va devices. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230602143854.1879091-4-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26vdpa: reorder vhost_vdpa_net_cvq_cmd_page_len functionEugenio Pérez
We need to call it from resource cleanup context, as munmap needs the size of the mappings. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230602143854.1879091-3-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-26vdpa: do not block migration if device has cvq and x-svq=onEugenio Pérez
It was a mistake to forbid in all cases, as SVQ is already able to send all the CVQ messages before start forwarding data vqs. It actually caused a regression, making impossible to migrate device previously migratable. Fixes: 36e4647247f2 ("vdpa: add vhost_vdpa_net_valid_svq_features") Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230602143854.1879091-2-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
2023-06-23vdpa: move CVQ isolation check to net_init_vhost_vdpaEugenio Pérez
Evaluating it at start time instead of initialization time may make the guest capable of dynamically adding or removing migration blockers. Also, moving to initialization reduces the number of ioctls in the migration, reducing failure possibilities. As a drawback we need to check for CVQ isolation twice: one time with no MQ negotiated and another one acking it, as long as the device supports it. This is because Vring ASID / group management is based on vq indexes, but we don't know the index of CVQ before negotiating MQ. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230526153143.470745-3-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2023-06-23vdpa: return errno in vhost_vdpa_get_vring_group errorEugenio Pérez
We need to tell in the caller, as some errors are expected in a normal workflow. In particular, parent drivers in recent kernels with VHOST_BACKEND_F_IOTLB_ASID may not support vring groups. In that case, -ENOTSUP is returned. This is the case of vp_vdpa in Linux 6.2. Next patches in this series will use that information to know if it must abort or not. Also, next patches return properly an errp instead of printing with error_report. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230526153143.470745-2-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-20meson: Replace softmmu_ss -> system_ssPhilippe Mathieu-Daudé
We use the user_ss[] array to hold the user emulation sources, and the softmmu_ss[] array to hold the system emulation ones. Hold the latter in the 'system_ss[]' array for parity with user emulation. Mechanical change doing: $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-10-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-13cocoa: Fix warnings about invalid prototype declarationsPhilippe Mathieu-Daudé
Fix the following Cocoa trivial warnings: C compiler for the host machine: cc (clang 14.0.0 "Apple clang version 14.0.0 (clang-1400.0.29.202)") Objective-C compiler for the host machine: clang (clang 14.0.0) [100/334] Compiling Objective-C object libcommon.fa.p/net_vmnet-bridged.m.o net/vmnet-bridged.m:40:31: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] static char* get_valid_ifnames() ^ void [742/1436] Compiling Objective-C object libcommon.fa.p/ui_cocoa.m.o ui/cocoa.m:1937:22: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] static int cocoa_main() ^ void Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-Id: <20230425192820.34063-1-philmd@linaro.org>
2023-05-23igb: Strip the second VLAN tag for extended VLANAkihiko Odaki
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Implement Rx SCTP CSOAkihiko Odaki
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23net/eth: Always add VLAN tagAkihiko Odaki
It is possible to have another VLAN tag even if the packet is already tagged. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23net/eth: Use void pointersAkihiko Odaki
The uses of uint8_t pointers were misleading as they are never accessed as an array of octets and it even require more strict alignment to access as struct eth_header. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23net/eth: Rename eth_setup_vlan_headers_exAkihiko Odaki
The old eth_setup_vlan_headers has no user so remove it and rename eth_setup_vlan_headers_ex. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23net/net_rx_pkt: Use iovec for net_rx_pkt_set_protocols()Akihiko Odaki
igb does not properly ensure the buffer passed to net_rx_pkt_set_protocols() is contiguous for the entire L2/L3/L4 header. Allow it to pass scattered data to net_rx_pkt_set_protocols(). Fixes: 3a977deebe ("Intrdocue igb device emulation") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-18configure: add --disable-colo-proxy optionVladimir Sementsov-Ogievskiy
Add option to not build filter-rewriter and colo-compare when they are not needed. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Message-Id: <20230515130640.46035-2-vsementsov@yandex-team.ru> Signed-off-by: Juan Quintela <quintela@redhat.com>
2023-04-21vdpa: accept VIRTIO_NET_F_SPEED_DUPLEX in SVQEugenio Pérez
There is no reason to block it as it has nothing to do with the vrings. All the support of the feature comes via config space. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Suggested-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Message-Id: <20230307170018.260557-1-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-13win32: replace closesocket() with close() wrapperMarc-André Lureau
Use a close() wrapper instead, so that we don't need to worry about closesocket() vs close() anymore, let's hope. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-Id: <20230221124802.4103554-17-marcandre.lureau@redhat.com>
2023-03-13slirp: open-code qemu_socket_(un)select()Marc-André Lureau
We are about to make the QEMU socket API use file-descriptor space only, but libslirp gives us SOCKET as fd, still. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-Id: <20230221124802.4103554-14-marcandre.lureau@redhat.com>
2023-03-13slirp: unregister the win32 SOCKETMarc-André Lureau
Presumably, this is what should happen when the SOCKET is to be removed. (it probably worked until now because closesocket() does it implicitly, but we never now how the slirp library could use the SOCKET later) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-Id: <20230221124802.4103554-13-marcandre.lureau@redhat.com>
2023-03-13main-loop: remove qemu_fd_register(), win32/slirp/socket specificMarc-André Lureau
Open-code the socket registration where it's needed, to avoid artificially used or unclear generic interface. Furthermore, the following patches are going to make socket handling use FD-only inside QEMU, but we need to handle win32 SOCKET from libslirp. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-Id: <20230221124802.4103554-12-marcandre.lureau@redhat.com>
2023-03-11Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into stagingPeter Maydell
# -----BEGIN PGP SIGNATURE----- # Version: GnuPG v1 # # iQEcBAABAgAGBQJkCvgFAAoJEO8Ells5jWIRHiUH/jhydpJHIqnAPxHQAwGtmyhb # 9Z52UOzW5V6KxfZJ+bQ4RPFkS2UwcxmeadPHY4zvvJTVBLAgG3QVgP4igj8CXKCI # xRnwMgTNeu655kZQ5P/elTwdBTCJFODk7Egg/bH3H1ZiUhXBhVRhK7q/wMgtlZkZ # Kexo6txCK4d941RNzEh45ZaGhdELE+B+D7cRuQgBs/DXZtJpsyEzBbP8KYSMHuER # AXfWo0YIBYj7X3ek9D6j0pbOkB61vqtYd7W6xV4iDrJCcFBIOspJbbBb1tGCHola # AXo5/OhRmiQnp/c/HTbJIDbrj0sq/r7LxYK4zY1x7UPbewHS9R+wz+FfqSmoBF0= # =056y # -----END PGP SIGNATURE----- # gpg: Signature made Fri 10 Mar 2023 09:27:33 GMT # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * tag 'net-pull-request' of https://github.com/jasowang/qemu: (44 commits) ebpf: fix compatibility with libbpf 1.0+ docs/system/devices/igb: Add igb documentation tests/avocado: Add igb test igb: Introduce qtest for igb device tests/qtest/libqos/e1000e: Export macreg functions tests/qtest/e1000e-test: Fabricate ethernet header Intrdocue igb device emulation e1000: Split header files pcie: Introduce pcie_sriov_num_vfs net/eth: Introduce EthL4HdrProto e1000e: Implement system clock net/eth: Report if headers are actually present e1000e: Count CRC in Tx statistics e1000: Count CRC in Tx statistics e1000e: Combine rx traces MAINTAINERS: Add e1000e test files MAINTAINERS: Add Akihiko Odaki as a e1000e reviewer e1000e: Do not assert when MSI-X is disabled later hw/net/net_tx_pkt: Check the payload length hw/net/net_tx_pkt: Implement TCP segmentation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-03-10net/eth: Introduce EthL4HdrProtoAkihiko Odaki
igb, a new network device emulation, will need SCTP checksum offloading. Currently eth_get_protocols() has a bool parameter for each protocol currently it supports, but there will be a bit too many parameters if we add yet another protocol. Introduce an enum type, EthL4HdrProto to represent all L4 protocols eth_get_protocols() support with one parameter. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10net/eth: Report if headers are actually presentAkihiko Odaki
The values returned by eth_get_protocols() are used to perform RSS, checksumming and segmentation. Even when a packet signals the use of the protocols which these operations can be applied to, the headers for them may not be present because of too short packet or fragmentation, for example. In such a case, the operations cannot be applied safely. Report the presence of headers instead of whether the use of the protocols are indicated with eth_get_protocols(). This also makes corresponding changes to the callers of eth_get_protocols() to match with its new signature and to remove redundant checks for fragmentation. Fixes: 75020a7021 ("Common definitions for VMWARE devices") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10hw/net/net_tx_pkt: Implement TCP segmentationAkihiko Odaki
There was no proper implementation of TCP segmentation before this change, and net_tx_pkt relied solely on IPv4 fragmentation. Not only this is not aligned with the specification, but it also resulted in corrupted IPv6 packets. This is particularly problematic for the igb, a new proposed device implementation; igb provides loopback feature for VMDq and the feature relies on software segmentation. Implement proper TCP segmentation in net_tx_pkt to fix such a scenario. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10net: Strip virtio-net header when dumpingAkihiko Odaki
filter-dump specifiees Ethernet as PCAP LinkType, which does not expect virtio-net header. Having virtio-net header in such PCAP file breaks PCAP unconsumable. Unfortunately currently there is no LinkType for virtio-net so for now strip virtio-net header to convert the output to Ethernet. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-07vdpa net: allow VHOST_F_LOG_ALLEugenio Pérez
Since some actions move to the start function instead of init, the device features may not be the parent vdpa device's, but the one returned by vhost backend. If transition to SVQ is supported, the vhost backend will return _F_LOG_ALL to signal the device is migratable. Add VHOST_F_LOG_ALL. HW dirty page tracking can be added on top of this change if the device supports it in the future. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230303172445.1089785-14-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07vdpa: block migration if device has unsupported featuresEugenio Pérez
A vdpa net device must initialize with SVQ in order to be migratable at this moment, and initialization code verifies some conditions. If the device is not initialized with the x-svq parameter, it will not expose _F_LOG so the vhost subsystem will block VM migration from its initialization. Next patches change this, so we need to verify migration conditions differently. QEMU only supports a subset of net features in SVQ, and it cannot migrate state that cannot track or restore in the destination. Add a migration blocker if the device offers an unsupported feature. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230303172445.1089785-12-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07vdpa net: block migration if the device has CVQEugenio Pérez
Devices with CVQ need to migrate state beyond vq state. Leaving this to future series. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230303172445.1089785-11-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 11:30:56 +0000