target: rename cortex_a8 to cortex_a

Rename cortex_a8 target to use a more correct cortex_a name.
This also adds a deprecated_name var so that older scripts issue a warning
to update the target name.

cfg files have also been updated to the new target name.

Change-Id: I0eb1429c9281321efeb444b27a662a941a2ab67f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1130
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

13 files changed, 38 insertions, 33 deletions

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 2af9e60d..b1d80e4b 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -1878,14 +1878,14 @@ After setting targets, you can define a list of targets working in SMP.
 @example
 set _TARGETNAME_1 $_CHIPNAME.cpu1
 set _TARGETNAME_2 $_CHIPNAME.cpu2
-target create $_TARGETNAME_1 cortex_a8 -chain-position $_CHIPNAME.dap \
+target create $_TARGETNAME_1 cortex_a -chain-position $_CHIPNAME.dap \
 -coreid 0 -dbgbase $_DAP_DBG1
-target create $_TARGETNAME_2 cortex_a8 -chain-position $_CHIPNAME.dap \
+target create $_TARGETNAME_2 cortex_a -chain-position $_CHIPNAME.dap \
 -coreid 1 -dbgbase $_DAP_DBG2
 #define 2 targets working in smp.
 target smp $_CHIPNAME.cpu2 $_CHIPNAME.cpu1
 @end example
-In the above example on cortex_a8, 2 cpus are working in SMP.
+In the above example on cortex_a, 2 cpus are working in SMP.
 In SMP only one GDB instance is created and :
 @itemize @bullet
 @item a set of hardware breakpoint sets the same breakpoint on all targets in the list.
@@ -1896,32 +1896,32 @@ In SMP only one GDB instance is created and :
 displayed by the GDB session @pxref{usingopenocdsmpwithgdb,,Using OpenOCD SMP with GDB}.
 @end itemize
 
-The SMP behaviour can be disabled/enabled dynamically. On cortex_a8 following
+The SMP behaviour can be disabled/enabled dynamically. On cortex_a following
 command have been implemented.
 @itemize @bullet
-@item cortex_a8 smp_on : enable SMP mode, behaviour is as described above.
-@item cortex_a8 smp_off : disable SMP mode, the current target is the one
+@item cortex_a smp_on : enable SMP mode, behaviour is as described above.
+@item cortex_a smp_off : disable SMP mode, the current target is the one
 displayed in the GDB session, only this target is now controlled by GDB
 session. This behaviour is useful during system boot up.
-@item cortex_a8 smp_gdb : display/fix the core id displayed in GDB session see
+@item cortex_a smp_gdb : display/fix the core id displayed in GDB session see
 following example.
 @end itemize
 
 @example
->cortex_a8 smp_gdb
+>cortex_a smp_gdb
 gdb coreid  0 -> -1
 #0 : coreid 0 is displayed to GDB ,
 #-> -1 : next resume triggers a real resume
-> cortex_a8 smp_gdb 1
+> cortex_a smp_gdb 1
 gdb coreid  0 -> 1
 #0 :coreid 0 is displayed to GDB ,
 #->1  : next resume displays coreid 1 to GDB
 > resume
-> cortex_a8 smp_gdb
+> cortex_a smp_gdb
 gdb coreid  1 -> 1
 #1 :coreid 1 is displayed to GDB ,
 #->1 : next resume displays coreid 1 to GDB
-> cortex_a8 smp_gdb -1
+> cortex_a smp_gdb -1
 gdb coreid  1 -> -1
 #1 :coreid 1 is displayed to GDB,
 #->-1 : next resume triggers a real resume
@@ -4064,7 +4064,7 @@ At this writing, the supported CPU types and variants are:
 @item @code{arm9tdmi} -- this is an ARMv4 core
 @item @code{avr} -- implements Atmel's 8-bit AVR instruction set.
 (Support for this is preliminary and incomplete.)
-@item @code{cortex_a8} -- this is an ARMv7 core with an MMU
+@item @code{cortex_a} -- this is an ARMv7 core with an MMU
 @item @code{cortex_m} -- this is an ARMv7 core, supporting only the
 compact Thumb2 instruction set.
 @item @code{dragonite} -- resembles arm966e
@@ -7300,7 +7300,7 @@ cores @emph{except the ARM1176} use the same six bits.
 @cindex Debug Access Port
 @cindex DAP
 These commands are specific to ARM architecture v7 Debug Access Port (DAP),
-included on Cortex-M and Cortex-A8 systems.
+included on Cortex-M and Cortex-A systems.
 They are available in addition to other core-specific commands that may be available.
 
 @deffn Command {dap apid} [num]
diff --git a/src/target/cortex_a.c b/src/target/cortex_a.c
index 4d12911f..2b5510f5 100644
--- a/src/target/cortex_a.c
+++ b/src/target/cortex_a.c
@@ -2746,9 +2746,9 @@ static const struct command_registration cortex_a8_command_handlers[] = {
 		.chain = armv7a_command_handlers,
 	},
 	{
-		.name = "cortex_a8",
+		.name = "cortex_a",
 		.mode = COMMAND_ANY,
-		.help = "Cortex-A8 command group",
+		.help = "Cortex-A command group",
 		.usage = "",
 		.chain = cortex_a8_exec_command_handlers,
 	},
diff --git a/src/target/startup.tcl b/src/target/startup.tcl
index 0c72cc71..56fcbaa7 100644
--- a/src/target/startup.tcl
+++ b/src/target/startup.tcl
@@ -173,3 +173,8 @@ proc cortex_m3 args {
 	echo "DEPRECATED! use 'cortex_m' not 'cortex_m3'"
 	eval cortex_m $args
 }
+
+proc cortex_a8 args {
+	echo "DEPRECATED! use 'cortex_a' not 'cortex_a8'"
+	eval cortex_a $args
+}
diff --git a/tcl/board/icnova_imx53_sodimm.cfg b/tcl/board/icnova_imx53_sodimm.cfg
index 9ea78b9a..e37887e5 100644
--- a/tcl/board/icnova_imx53_sodimm.cfg
+++ b/tcl/board/icnova_imx53_sodimm.cfg
@@ -19,7 +19,7 @@ adapter_khz 3000
 
 $_TARGETNAME configure -event "reset-assert" {
 	echo "Reseting ...."
-	#cortex_a8 dbginit
+	#cortex_a dbginit
 }
 
 $_TARGETNAME configure -event reset-init { sodimm_init }
diff --git a/tcl/board/imx53loco.cfg b/tcl/board/imx53loco.cfg
index d9d75f49..4c8a8da1 100644
--- a/tcl/board/imx53loco.cfg
+++ b/tcl/board/imx53loco.cfg
@@ -20,7 +20,7 @@ adapter_khz 3000
 
 $_TARGETNAME configure -event "reset-assert" {
 	echo "Reseting ...."
-	#cortex_a8 dbginit
+	#cortex_a dbginit
 }
 
 $_TARGETNAME configure -event reset-init { loco_init }
diff --git a/tcl/target/am335x.cfg b/tcl/target/am335x.cfg
index 99693dc0..9a24ef00 100644
--- a/tcl/target/am335x.cfg
+++ b/tcl/target/am335x.cfg
@@ -64,13 +64,13 @@ jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100"
 # Cortex A8 target
 #
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.dap -dbgbase 0x80001000
+target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap -dbgbase 0x80001000
 
 # SRAM: 64K at 0x4030.0000; use the first 16K
 $_TARGETNAME configure -work-area-phys 0x40300000 -work-area-size 0x4000
 
 $_TARGETNAME configure -event gdb-attach {
-   cortex_a8 dbginit
+   cortex_a dbginit
    halt
 }
 
diff --git a/tcl/target/amdm37x.cfg b/tcl/target/amdm37x.cfg
index 3121e8fd..ab2ccab1 100644
--- a/tcl/target/amdm37x.cfg
+++ b/tcl/target/amdm37x.cfg
@@ -141,7 +141,7 @@ jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap"
 
 # Create the CPU target to be used with GDB:  Cortex-A8, using DAP
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.dap
+target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap
 
 # The DM37x has 64K of SRAM starting at address 0x4020_0000.  Allow the first
 # 16K to be used as a scratchpad for OpenOCD.
@@ -200,7 +200,7 @@ $_TARGETNAME configure -event gdb-attach {
 # reset sequence.
 proc amdm37x_dbginit {target} {
    # General Cortex A8 debug initialisation
-   cortex_a8 dbginit
+   cortex_a dbginit
 
    # Enable DBGEN signal.  This signal is described in the ARM v7 TRM, but
    # access to the signal appears to be implementation specific.  TI does not
diff --git a/tcl/target/imx51.cfg b/tcl/target/imx51.cfg
index 706875d3..0ee388c9 100644
--- a/tcl/target/imx51.cfg
+++ b/tcl/target/imx51.cfg
@@ -31,7 +31,7 @@ jtag newtap $_CHIPNAME SJC -irlen 5 -ircapture 0x1 -irmask 0x1f \
 
 # GDB target: Cortex-A8, using DAP
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.DAP
+target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.DAP
 
 # some TCK tycles are required to activate the DEBUG power domain
 jtag configure $_CHIPNAME.SJC -event post-reset "runtest 100"
@@ -41,7 +41,7 @@ jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP"
 
 proc imx51_dbginit {target} {
      # General Cortex A8 debug initialisation
-     cortex_a8 dbginit
+     cortex_a dbginit
 }
 
 # Slow speed to be sure it will work
diff --git a/tcl/target/imx53.cfg b/tcl/target/imx53.cfg
index 7194783e..61fabc8a 100644
--- a/tcl/target/imx53.cfg
+++ b/tcl/target/imx53.cfg
@@ -31,7 +31,7 @@ jtag newtap $_CHIPNAME SJC -irlen 5 -ircapture 0x1 -irmask 0x1f \
 
 # GDB target: Cortex-A8, using DAP
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.DAP
+target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.DAP
 
 # some TCK tycles are required to activate the DEBUG power domain
 jtag configure $_CHIPNAME.SJC -event post-reset "runtest 100"
@@ -41,7 +41,7 @@ jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP"
 
 proc imx53_dbginit {target} {
      # General Cortex A8 debug initialisation
-     cortex_a8 dbginit
+     cortex_a dbginit
 }
 
 # Slow speed to be sure it will work
diff --git a/tcl/target/omap3530.cfg b/tcl/target/omap3530.cfg
index 018363a9..0e20852c 100644
--- a/tcl/target/omap3530.cfg
+++ b/tcl/target/omap3530.cfg
@@ -36,7 +36,7 @@ jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \
 
 # GDB target: Cortex-A8, using DAP
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.dap
+target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap
 
 # SRAM: 64K at 0x4020.0000; use the first 16K
 $_TARGETNAME configure -work-area-phys 0x40200000 -work-area-size 0x4000
@@ -54,7 +54,7 @@ jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap"
 
 proc omap3_dbginit {target} {
      # General Cortex A8 debug initialisation
-     cortex_a8 dbginit
+     cortex_a dbginit
      # Enable DBGU signal for OMAP353x
      $target mww phys 0x5401d030 0x00002000
 }
diff --git a/tcl/target/omap4430.cfg b/tcl/target/omap4430.cfg
index 2e9f5543..6f3525ae 100644
--- a/tcl/target/omap4430.cfg
+++ b/tcl/target/omap4430.cfg
@@ -94,7 +94,7 @@ set _coreid 0
 set _dbgbase [expr 0x80000000 | ($_coreid << 13)]
 echo "Using dbgbase = [format 0x%x $_dbgbase]"
  
-target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.dap \
+target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap \
   -coreid 0 -dbgbase $_dbgbase
 
 # SRAM: 56KiB at 0x4030.0000
diff --git a/tcl/target/omap4460.cfg b/tcl/target/omap4460.cfg
index 5fdd654d..9c40e62d 100644
--- a/tcl/target/omap4460.cfg
+++ b/tcl/target/omap4460.cfg
@@ -94,7 +94,7 @@ set _coreid 0
 set _dbgbase [expr 0x80000000 | ($_coreid << 13)]
 echo "Using dbgbase = [format 0x%x $_dbgbase]"
 
-target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.dap \
+target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap \
   -coreid 0 -dbgbase $_dbgbase
 
 # SRAM: 56KiB at 0x4030.0000
diff --git a/tcl/target/u8500.cfg b/tcl/target/u8500.cfg
index 348058c6..66fc075c 100644
--- a/tcl/target/u8500.cfg
+++ b/tcl/target/u8500.cfg
@@ -19,12 +19,12 @@ proc ocd_gdb_restart {target_id} {
 	global _SMP
     targets $_TARGETNAME_1
 	if { [expr ($_SMP == 1)] } {
-	cortex_a8 smp_off
+	cortex_a smp_off
 	}
 	rst_run
 	halt
 	if { [expr ($_SMP == 1)]} {
-	cortex_a8 smp_on
+	cortex_a smp_on
 	}
 }
 
@@ -202,7 +202,7 @@ if { [info exists DAP_DBG2] } {
 	set _DAP_DBG2 0x801AA000 
 }
 
-target create $_TARGETNAME_1 cortex_a8 -chain-position $_CHIPNAME.dap -dbgbase $_DAP_DBG1 -coreid 0 -rtos linux
+target create $_TARGETNAME_1 cortex_a -chain-position $_CHIPNAME.dap -dbgbase $_DAP_DBG1 -coreid 0 -rtos linux
 
 $_TARGETNAME_1 configure -event gdb-attach {
 	halt
@@ -217,7 +217,7 @@ global _TARGETNAME_2
 set _TARGETNAME_2 $TARGETNAME_2
 }
 
-target create $_TARGETNAME_2 cortex_a8 -chain-position $_CHIPNAME.dap -dbgbase $_DAP_DBG2 -coreid 1 -rtos linux
+target create $_TARGETNAME_2 cortex_a -chain-position $_CHIPNAME.dap -dbgbase $_DAP_DBG2 -coreid 1 -rtos linux
 
 $_TARGETNAME_2 configure -event gdb-attach {
 	halt