Merge remote-tracking branch 'imx-mxs/for-next'

66 files changed, 2594 insertions, 78 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a3db77b7d3d1..6d396a77edb5 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -364,6 +364,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-gw551x.dtb \
 	imx6dl-gw552x.dtb \
 	imx6dl-gw553x.dtb \
+	imx6dl-gw560x.dtb \
 	imx6dl-gw5903.dtb \
 	imx6dl-gw5904.dtb \
 	imx6dl-hummingboard.dtb \
@@ -409,6 +410,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-gw551x.dtb \
 	imx6q-gw552x.dtb \
 	imx6q-gw553x.dtb \
+	imx6q-gw560x.dtb \
 	imx6q-gw5903.dtb \
 	imx6q-gw5904.dtb \
 	imx6q-h100.dtb \
@@ -477,6 +479,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-cl-som-imx7.dtb \
 	imx7d-colibri-eval-v3.dtb \
 	imx7d-nitrogen7.dtb \
+	imx7d-pico.dtb \
 	imx7d-sbc-imx7.dtb \
 	imx7d-sdb.dtb \
 	imx7d-sdb-sht11.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-gw560x.dts b/arch/arm/boot/dts/imx6dl-gw560x.dts
new file mode 100644
index 000000000000..21bdfaf8df53
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw560x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw560x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X";
+	compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 8e84713f42c0..687ab911c13f 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -19,7 +19,6 @@
 
 	/* these are used by bootloader for disabling nodes */
 	aliases {
-		ethernet1 = &eth1;
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
@@ -347,10 +346,6 @@
 &pcie {
 	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
-
-	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-		compatible = "marvell,sky2";
-	};
 };
 
 &ssi1 {
diff --git a/arch/arm/boot/dts/imx6q-gw560x.dts b/arch/arm/boot/dts/imx6q-gw560x.dts
new file mode 100644
index 000000000000..735f2bbf1439
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw560x.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw560x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW560X";
+	compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index e9a5d0b8c7b0..dd33849335b2 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -125,7 +125,7 @@
 			clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
 				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
 			clock-names = "bus", "core";
-			power-domains = <&gpc 1>;
+			power-domains = <&pd_pu>;
 		};
 
 		ipu2: ipu@02800000 {
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index e8078758f26c..ad84eddb6836 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -254,6 +254,7 @@
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
+		lrclk-strength = <3>;
 	};
 
 	/* STMPE811 touch screen controller */
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index a208e7e0dc6e..5bc6ed1a5b35 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -14,7 +14,6 @@
 / {
 	/* these are used by bootloader for disabling nodes */
 	aliases {
-		ethernet1 = &eth1;
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
@@ -342,10 +341,6 @@
 	pinctrl-0 = <&pinctrl_pcie>;
 	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
-
-	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-		compatible = "marvell,sky2";
-	};
 };
 
 &pwm2 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 968fda94d14b..66fcf838e964 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -14,7 +14,6 @@
 / {
 	/* these are used by bootloader for disabling nodes */
 	aliases {
-		ethernet1 = &eth1;
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
@@ -379,10 +378,6 @@
 	pinctrl-0 = <&pinctrl_pcie>;
 	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
-
-	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-		compatible = "marvell,sky2";
-	};
 };
 
 &pwm1 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
new file mode 100644
index 000000000000..d894dde6e85d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -0,0 +1,749 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+			>;
+		default-brightness-level = <100>;
+	};
+
+	backlight-keypad {
+		compatible = "gpio-backlight";
+		gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "12P0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1p4v: regulator-vddsoc {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_soc";
+		regulator-min-microvolt = <1400000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	pca9555: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	ds1672: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	tca8418: keypad@34 {
+		compatible = "ti,tca8418";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_keypad>;
+		reg = <0x34>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0)
+			         MATRIX_KEY(0x00, 0x00, BTN_1)
+			         MATRIX_KEY(0x01, 0x01, BTN_2)
+			         MATRIX_KEY(0x01, 0x00, BTN_3)
+			         MATRIX_KEY(0x02, 0x00, BTN_4)
+			         MATRIX_KEY(0x00, 0x03, BTN_5)
+			         MATRIX_KEY(0x00, 0x02, BTN_6)
+			         MATRIX_KEY(0x01, 0x03, BTN_7)
+			         MATRIX_KEY(0x01, 0x02, BTN_8)
+			         MATRIX_KEY(0x02, 0x02, BTN_9)
+		>;
+		keypad,num-rows = <4>;
+		keypad,num-columns = <4>;
+	};
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.931) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <796551>;
+				regulator-max-microvolt = <1544827>;
+				lltc,fb-voltage-divider = <243000 261000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+				linux,phandle = <&reg_vdd_arm>;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw4 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */
+			reg_1p0v: ldo2 {
+				regulator-name = "vdd1p0";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1050000>;
+				lltc,fb-voltage-divider = <78700 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_AUD_1P8: Audio codec */
+			reg_aud_1p8v: ldo3 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts: touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			/* AUD4 */
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+			/* AUD6 */
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x130b0
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x130b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x130b0
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
+		>;
+	};
+
+	pinctrl_flexcan: flexcangrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x4001b0b0 /* DIOI2C_DIS# */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x0001b0b0 /* LVDS_TOUCH_IRQ# */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x0001b0b0 /* LVDS_BACKEN */
+		>;
+	};
+
+	pinctrl_keypad: keypadgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x0001b0b0 /* KEYPAD_IRQ# */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x0001b0b0 /* KEYPAD_LED_EN */
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b0    /* PCI_RST# */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* USBHUB_RST# */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x170f9
+			MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x170f9
+			MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x170f9
+			MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index bad3c9f9eeac..b63134e3b51a 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -408,7 +408,7 @@
 	};
 
 	rtc: rtc@68 {
-		compatible = "st,rv4162";
+		compatible = "microcrystal,rv4162";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rv4162>;
 		reg = <0x68>;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index 559da17297ef..aeaa5a6e4fcf 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -326,7 +326,7 @@
 	};
 
 	rtc@68 {
-		compatible = "st,rv4162";
+		compatible = "microcrystal,rv4162";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rv4162>;
 		reg = <0x68>;
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 82dc5744ae19..850ceadbc2cf 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -88,6 +88,7 @@
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
+		lrclk-strength = <3>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index e426faa9c243..f325411f66aa 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -156,7 +156,7 @@
 				 <&clks IMX6QDL_CLK_GPU3D_CORE>,
 				 <&clks IMX6QDL_CLK_GPU3D_SHADER>;
 			clock-names = "bus", "core", "shader";
-			power-domains = <&gpc 1>;
+			power-domains = <&pd_pu>;
 		};
 
 		gpu_2d: gpu@00134000 {
@@ -166,7 +166,7 @@
 			clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>,
 				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
 			clock-names = "bus", "core";
-			power-domains = <&gpc 1>;
+			power-domains = <&pd_pu>;
 		};
 
 		timer@00a00600 {
@@ -434,7 +434,7 @@
 				clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
 					 <&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
 				clock-names = "per", "ahb";
-				power-domains = <&gpc 1>;
+				power-domains = <&pd_pu>;
 				resets = <&src 1>;
 				iram = <&ocram>;
 			};
@@ -644,6 +644,7 @@
 					anatop-min-bit-val = <4>;
 					anatop-min-voltage = <800000>;
 					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-3p0 {
@@ -658,6 +659,7 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2625000>;
 					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-2p5 {
@@ -672,6 +674,7 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2100000>;
 					anatop-max-voltage = <2875000>;
+					anatop-enable-bit = <0>;
 				};
 
 				reg_arm: regulator-vddcore {
@@ -797,14 +800,29 @@
 				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 90 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&intc>;
-				pu-supply = <&reg_pu>;
-				clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
-					 <&clks IMX6QDL_CLK_GPU3D_SHADER>,
-					 <&clks IMX6QDL_CLK_GPU2D_CORE>,
-					 <&clks IMX6QDL_CLK_GPU2D_AXI>,
-					 <&clks IMX6QDL_CLK_OPENVG_AXI>,
-					 <&clks IMX6QDL_CLK_VPU_AXI>;
-				#power-domain-cells = <1>;
+				clocks = <&clks IMX6QDL_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+					pd_pu: power-domain@1 {
+						reg = <1>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_pu>;
+						clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+						         <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+						         <&clks IMX6QDL_CLK_GPU2D_CORE>,
+						         <&clks IMX6QDL_CLK_GPU2D_AXI>,
+						         <&clks IMX6QDL_CLK_OPENVG_AXI>,
+						         <&clks IMX6QDL_CLK_VPU_AXI>;
+					};
+				};
 			};
 
 			gpr: iomuxc-gpr@020e0000 {
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
index 59453f2ac4ba..299d863690c5 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -120,6 +120,10 @@
 		     <0 119 IRQ_TYPE_LEVEL_HIGH>;
 };
 
+&gpc {
+	compatible = "fsl,imx6qp-gpc", "fsl,imx6q-gpc";
+};
+
 &ipu1 {
 	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
 	fsl,prg = <&prg1>;
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index cc9572ea2860..3243af4a9984 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -530,6 +530,7 @@
 					anatop-min-bit-val = <4>;
 					anatop-min-voltage = <800000>;
 					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-3p0 {
@@ -544,6 +545,7 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2625000>;
 					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-2p5 {
@@ -558,6 +560,7 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2100000>;
 					anatop-max-voltage = <2850000>;
+					anatop-enable-bit = <0>;
 				};
 
 				reg_arm: regulator-vddcore {
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index 802da45aa551..ac1989e5d5ad 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -374,7 +374,7 @@
 	cap-sdio-irq;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio7>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index d71da30c9cff..c0139d7e497a 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -128,3 +128,11 @@
 		reg = <1>;
 	};
 };
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1a_reg>;
+};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 3f1416be4c36..f16b9df9d0c6 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -587,6 +587,7 @@
 					anatop-min-bit-val = <4>;
 					anatop-min-voltage = <800000>;
 					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-3p0 {
@@ -601,6 +602,7 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2625000>;
 					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-2p5 {
@@ -615,6 +617,7 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2100000>;
 					anatop-max-voltage = <2875000>;
+					anatop-enable-bit = <0>;
 				};
 
 				reg_arm: regulator-vddcore {
diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
index 51095df33a90..aec5ccce0321 100644
--- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
@@ -120,7 +120,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		compatible = "brcm,bcm4329-fmac";
 		reg = <1>;
 		interrupt-parent = <&gpio2>;
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index b9d7d2d09402..6da2b77edd46 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -542,6 +542,7 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2625000>;
 					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
 				};
 
 				reg_arm: regulator-vddcore {
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 2d87489f9105..d7753f79937a 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -43,7 +43,7 @@
 / {
 	bl: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 	};
 
 	reg_module_3v3: regulator-module-3v3 {
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index 5d98e2b5d54b..dd40e49f6c42 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -67,7 +67,7 @@
 
 	backlight-j20 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -279,7 +279,7 @@
 	status = "okay";
 
 	rtc@68 {
-		compatible = "rv4162";
+		compatible = "microcrystal,rv4162";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2_rv4162>;
 		reg = <0x68>;
diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts
new file mode 100644
index 000000000000..ebda3dffc270
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-pico.dts
@@ -0,0 +1,387 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "Technexion Pico i.MX7D Board";
+	compatible = "technexion,imx7d-pico", "fsl,imx7d";
+
+	memory {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			status = "okay";
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_vref_1v8>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pmic: pfuze3000@08 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__I2C1_SDA	0x4000007f
+			MX7D_PAD_UART1_RX_DATA__I2C1_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK	0x1f
+			MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__UART5_DCE_TX		0x79
+			MX7D_PAD_I2C4_SCL__UART5_DCE_RX		0x79
+		>;
+	};
+
+	pinctrl_usbotg1_pwr: usbotg_pwr {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__GPIO4_IO5	0x14
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 5be01a1bf840..77c400f0017a 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -52,6 +52,27 @@
 		reg = <0x80000000 0x80000000>;
 	};
 
+	spi4 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		extended_io: gpio-expander@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -328,6 +349,11 @@
 	};
 };
 
+&pcie {
+	reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
@@ -642,5 +668,13 @@
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x110b0
 		>;
+
+		pinctrl_spi4: spi4grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
+				MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
+				MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index f6dee41a05d9..f46814a7ea44 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -42,6 +42,7 @@
  */
 
 #include "imx7s.dtsi"
+#include <dt-bindings/reset/imx7-reset.h>
 
 / {
 	cpus {
@@ -127,6 +128,42 @@
 		fsl,num-rx-queues=<3>;
 		status = "disabled";
 	};
+
+	pcie: pcie@0x33800000 {
+		compatible = "fsl,imx7d-pcie", "snps,dw-pcie";
+		reg = <0x33800000 0x4000>,
+		      <0x4ff00000 0x80000>;
+		reg-names = "dbi", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
+		num-lanes = <1>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
+			 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
+			 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
+		clock-names = "pcie", "pcie_bus", "pcie_phy";
+		assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
+				  <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
+		assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
+					 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+
+		fsl,max-link-speed = <2>;
+		power-domains = <&pgc_pcie_phy>;
+		resets = <&src IMX7_RESET_PCIEPHY>,
+			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
+		reset-names = "pciephy", "apps";
+		status = "disabled";
+	};
 };
 
 &ca_funnel_ports {
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index d5237fd0fa65..8dfed85471e1 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -295,6 +295,7 @@
 	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
 	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
+	no-1-8-v;
 	fsl,tuning-step = <2>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index c4f12fd2e044..4cf6c458b583 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -42,6 +42,7 @@
  */
 
 #include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/power/imx7-power.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -119,7 +120,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
+		interrupt-parent = <&gpc>;
 		ranges;
 
 		funnel@30041000 {
@@ -301,6 +302,7 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
+			interrupt-parent = <&intc>;
 			reg = <0x31001000 0x1000>,
 			      <0x31002000 0x2000>,
 			      <0x31004000 0x2000>,
@@ -309,6 +311,7 @@
 
 		timer {
 			compatible = "arm,armv7-timer";
+			interrupt-parent = <&intc>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -488,7 +491,8 @@
 			};
 
 			gpr: iomuxc-gpr@30340000 {
-				compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
+				compatible = "fsl,imx7d-iomuxc-gpr",
+					"fsl,imx6q-iomuxc-gpr", "syscon";
 				reg = <0x30340000 0x10000>;
 			};
 
@@ -516,6 +520,7 @@
 					anatop-min-bit-val = <8>;
 					anatop-min-voltage = <800000>;
 					anatop-max-voltage = <1200000>;
+					anatop-enable-bit = <0>;
 				};
 			};
 
@@ -563,6 +568,27 @@
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				#reset-cells = <1>;
 			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx7d-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupt-controller;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <3>;
+				interrupt-parent = <&intc>;
+				#power-domain-cells = <1>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_pcie_phy: pgc-power-domain@IMX7_POWER_DOMAIN_PCIE_PHY {
+						#power-domain-cells = <0>;
+						reg = <IMX7_POWER_DOMAIN_PCIE_PHY>;
+						power-supply = <&reg_1p0d>;
+					};
+				};
+			};
 		};
 
 		aips2: aips-bus@30400000 {
@@ -609,7 +635,7 @@
 				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
 					 <&clks IMX7D_PWM1_ROOT_CLK>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -620,7 +646,7 @@
 				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
 					 <&clks IMX7D_PWM2_ROOT_CLK>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -631,7 +657,7 @@
 				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
 					 <&clks IMX7D_PWM3_ROOT_CLK>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -642,7 +668,7 @@
 				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
 					 <&clks IMX7D_PWM4_ROOT_CLK>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -934,8 +960,8 @@
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
 					<&clks IMX7D_USDHC1_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -946,8 +972,8 @@
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
 					<&clks IMX7D_USDHC2_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -958,8 +984,8 @@
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
 					<&clks IMX7D_USDHC3_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index bb6fa568b620..bf1e7e316918 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -55,6 +55,9 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
 CONFIG_ARM_IMX6Q_CPUFREQ=y
 CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 6e0f751be229..aef2b54a691c 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -8,6 +8,7 @@ CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUPS=y
 # CONFIG_UTS_NS is not set
 # CONFIG_IPC_NS is not set
 # CONFIG_PID_NS is not set
@@ -75,6 +76,7 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_MXS_LRADC=y
 CONFIG_TOUCHSCREEN_TSC2007=m
 # CONFIG_SERIO is not set
 CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
@@ -95,6 +97,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_STMP3XXX_RTC_WATCHDOG=y
+CONFIG_MFD_MXS_LRADC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
@@ -136,10 +139,9 @@ CONFIG_RTC_DRV_DS1307=m
 CONFIG_RTC_DRV_STMP=y
 CONFIG_DMADEVICES=y
 CONFIG_MXS_DMA=y
-CONFIG_STAGING=y
-CONFIG_MXS_LRADC=y
 CONFIG_IIO=y
 CONFIG_IIO_SYSFS_TRIGGER=y
+CONFIG_MXS_LRADC_ADC=y
 CONFIG_PWM=y
 CONFIG_PWM_MXS=y
 CONFIG_NVMEM=y
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 936c59d0e18b..782699e67600 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -536,6 +536,7 @@ config SOC_IMX7D
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
+	select IMX_GPCV2
 	help
 		This enables support for Freescale i.MX7 Dual processor.
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
index 17fae8112e4d..7286b1ebfd7a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree file for Freescale LS1012A Freedom Board.
  *
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPLv2 or the X11 license, at your option. Note that this dual
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index e2a93d53d3d8..8c013b54db14 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree file for Freescale LS1012A QDS Board.
  *
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPLv2 or the X11 license, at your option. Note that this dual
@@ -97,6 +97,14 @@
 	status = "okay";
 };
 
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
index ed77f6b0937b..c1a119effa61 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree file for Freescale LS1012A RDB Board.
  *
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPLv2 or the X11 license, at your option. Note that this dual
@@ -54,6 +54,19 @@
 	status = "okay";
 };
 
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index b497ac196ccc..9a2ccd86ec12 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Include file for Freescale Layerscape-1012A family SoC.
  *
- * Copyright 2016, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPLv2 or the X11 license, at your option. Note that this dual
@@ -117,12 +117,37 @@
 		#size-cells = <2>;
 		ranges;
 
+		esdhc0: esdhc@1560000 {
+			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			clocks = <&clockgen 4 0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
 		scfg: scfg@1570000 {
 			compatible = "fsl,ls1012a-scfg", "syscon";
 			reg = <0x0 0x1570000 0x0 0x10000>;
 			big-endian;
 		};
 
+		esdhc1: esdhc@1580000 {
+			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1580000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			clocks = <&clockgen 4 0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			broken-cd;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
 		crypto: crypto@1700000 {
 			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
 				     "fsl,sec-v4.0";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
new file mode 100644
index 000000000000..169e171407a6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
@@ -0,0 +1,45 @@
+/*
+ * QorIQ FMan v3 device tree nodes for ls1043
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+
+};
+
+&fman0 {
+	/* these aliases provide the FMan ports mapping */
+	enet0: ethernet@e0000 {
+	};
+
+	enet1: ethernet@e2000 {
+	};
+
+	enet2: ethernet@e4000 {
+	};
+
+	enet3: ethernet@e6000 {
+	};
+
+	enet4: ethernet@e8000 {
+	};
+
+	enet5: ethernet@ea000 {
+	};
+
+	enet6: ethernet@f0000 {
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 0989d635b558..6341281485cf 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Include file for Freescale Layerscape-1043A family SoC.
  *
- * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <Mingkai.hu@freescale.com>
  *
@@ -181,3 +181,5 @@
 		reg = <0>;
 	};
 };
+
+#include "fsl-ls1043-post.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index c37110bc1506..df5b180a95a8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Include file for Freescale Layerscape-1043A family SoC.
  *
- * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <Mingkai.hu@freescale.com>
  *
@@ -139,3 +139,76 @@
 &duart1 {
 	status = "okay";
 };
+
+#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy1>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@e2000 {
+		phy-handle = <&qsgmii_phy2>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii-txid";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii-txid";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&qsgmii_phy3>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&qsgmii_phy4>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@f0000 { /* 10GEC1 */
+		phy-handle = <&aqr105_phy>;
+		phy-connection-type = "xgmii";
+	};
+
+	mdio@fc000 {
+		rgmii_phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		rgmii_phy2: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+
+		qsgmii_phy1: ethernet-phy@4 {
+			reg = <0x4>;
+		};
+
+		qsgmii_phy2: ethernet-phy@5 {
+			reg = <0x5>;
+		};
+
+		qsgmii_phy3: ethernet-phy@6 {
+			reg = <0x6>;
+		};
+
+		qsgmii_phy4: ethernet-phy@7 {
+			reg = <0x7>;
+		};
+	};
+
+	mdio@fd000 {
+		aqr105_phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts = <0 132 4>;
+			reg = <0x1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 45cface08cbb..31fd77f82ced 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Include file for Freescale Layerscape-1043A family SoC.
  *
- * Copyright 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <Mingkai.hu@freescale.com>
  *
@@ -45,6 +45,7 @@
  */
 
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "fsl,ls1043a";
@@ -52,6 +53,17 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -106,6 +118,33 @@
 		      /* DRAM space 1, size: 2GiB DRAM */
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			compatible = "shared-dma-pool";
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+			no-map;
+		};
+
+		qman_fqd: qman-fqd {
+			compatible = "shared-dma-pool";
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+			no-map;
+		};
+
+		qman_pfdr: qman-pfdr {
+			compatible = "shared-dma-pool";
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+			no-map;
+		};
+	};
+
 	sysclk: sysclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -152,7 +191,7 @@
 		interrupts = <1 9 0xf08>;
 	};
 
-	soc {
+	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -223,6 +262,7 @@
 		ifc: ifc@1530000 {
 			compatible = "fsl,ifc", "simple-bus";
 			reg = <0x0 0x1530000 0x0 0x10000>;
+			big-endian;
 			interrupts = <0 43 0x4>;
 		};
 
@@ -333,6 +373,28 @@
 			};
 		};
 
+		qman: qman@1880000 {
+			compatible = "fsl,qman";
+			reg = <0x0 0x1880000 0x0 0x10000>;
+			interrupts = <0 45 0x4>;
+			memory-region = <&qman_fqd &qman_pfdr>;
+		};
+
+		bman: bman@1890000 {
+			compatible = "fsl,bman";
+			reg = <0x0 0x1890000 0x0 0x10000>;
+			interrupts = <0 45 0x4>;
+			memory-region = <&bman_fbpr>;
+		};
+
+		bportals: bman-portals@508000000 {
+			ranges = <0x0 0x5 0x08000000 0x8000000>;
+		};
+
+		qportals: qman-portals@500000000 {
+			ranges = <0x0 0x5 0x00000000 0x8000000>;
+		};
+
 		dspi0: dspi@2100000 {
 			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
@@ -688,3 +750,6 @@
 	};
 
 };
+
+#include "qoriq-qman-portals.dtsi"
+#include "qoriq-bman-portals.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
new file mode 100644
index 000000000000..f5017dba0f17
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
@@ -0,0 +1,48 @@
+/*
+ * QorIQ FMan v3 device tree nodes for ls1046
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+#include "qoriq-fman3-0-10g-1.dtsi"
+};
+
+&fman0 {
+	/* these aliases provide the FMan ports mapping */
+	enet0: ethernet@e0000 {
+	};
+
+	enet1: ethernet@e2000 {
+	};
+
+	enet2: ethernet@e4000 {
+	};
+
+	enet3: ethernet@e6000 {
+	};
+
+	enet4: ethernet@e8000 {
+	};
+
+	enet5: ethernet@ea000 {
+	};
+
+	enet6: ethernet@f0000 {
+	};
+
+	enet7: ethernet@f2000 {
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index 290e5b014414..434383bade0e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
  *
- * Copyright 2016, Freescale Semiconductor, Inc.
+ * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * Shaohui Xie <Shaohui.Xie@nxp.com>
  *
@@ -210,3 +210,5 @@
 		reg = <0>;
 	};
 };
+
+#include "fsl-ls1046-post.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index d1ccc000d05a..5dc2782e2a58 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
  *
- * Copyright 2016, Freescale Semiconductor, Inc.
+ * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <mingkai.hu@nxp.com>
  *
@@ -72,6 +72,14 @@
 	status = "okay";
 };
 
+&esdhc {
+	mmc-hs200-1_8v;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -148,3 +156,63 @@
 		reg = <1>;
 	};
 };
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&sgmii_phy1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&sgmii_phy2>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@f0000 { /* 10GEC1 */
+		phy-handle = <&aqr106_phy>;
+		phy-connection-type = "xgmii";
+	};
+
+	ethernet@f2000 { /* 10GEC2 */
+		fixed-link = <0 1 1000 0 0>;
+		phy-connection-type = "xgmii";
+	};
+
+	mdio@fc000 {
+		rgmii_phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		rgmii_phy2: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+
+		sgmii_phy1: ethernet-phy@3 {
+			reg = <0x3>;
+		};
+
+		sgmii_phy2: ethernet-phy@4 {
+			reg = <0x4>;
+		};
+	};
+
+	mdio@fd000 {
+		aqr106_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts = <0 131 4>;
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index f4b8b7edaf9d..c161df66a9ea 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
  *
- * Copyright 2016, Freescale Semiconductor, Inc.
+ * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <mingkai.hu@nxp.com>
  *
@@ -55,6 +55,15 @@
 
 	aliases {
 		crypto = &crypto;
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
 	};
 
 	cpus {
@@ -174,7 +183,7 @@
 					 IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	soc {
+	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -190,6 +199,7 @@
 		ifc: ifc@1530000 {
 			compatible = "fsl,ifc", "simple-bus";
 			reg = <0x0 0x1530000 0x0 0x10000>;
+			big-endian;
 			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -209,10 +219,10 @@
 		};
 
 		esdhc: esdhc@1560000 {
-			compatible = "fsl,esdhc";
+			compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <0>;
+			clocks = <&clockgen 2 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
 			big-endian;
@@ -268,6 +278,30 @@
 			};
 		};
 
+		qman: qman@1880000 {
+			compatible = "fsl,qman";
+			reg = <0x0 0x1880000 0x0 0x10000>;
+			interrupts = <0 45 0x4>;
+			memory-region = <&qman_fqd &qman_pfdr>;
+
+		};
+
+		bman: bman@1890000 {
+			compatible = "fsl,bman";
+			reg = <0x0 0x1890000 0x0 0x10000>;
+			interrupts = <0 45 0x4>;
+			memory-region = <&bman_fbpr>;
+
+		};
+
+		qportals: qman-portals@500000000 {
+			ranges = <0x0 0x5 0x00000000 0x8000000>;
+		};
+
+		bportals: bman-portals@508000000 {
+			ranges = <0x0 0x5 0x08000000 0x8000000>;
+		};
+
 		dcfg: dcfg@1ee0000 {
 			compatible = "fsl,ls1046a-dcfg", "syscon";
 			reg = <0x0 0x1ee0000 0x0 0x10000>;
@@ -594,4 +628,34 @@
 			clocks = <&clockgen 4 1>;
 		};
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			compatible = "shared-dma-pool";
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+			no-map;
+		};
+
+		qman_fqd: qman-fqd {
+			compatible = "shared-dma-pool";
+			size = <0 0x800000>;
+			alignment = <0 0x800000>;
+			no-map;
+		};
+
+		qman_pfdr: qman-pfdr {
+			compatible = "shared-dma-pool";
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+			no-map;
+		};
+	};
 };
+
+#include "qoriq-qman-portals.dtsi"
+#include "qoriq-bman-portals.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 8c3cae530f8f..30128051d0c0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -110,6 +110,30 @@
 	};
 };
 
+&ifc {
+	ranges = <0 0 0x5 0x80000000 0x08000000
+		  2 0 0x5 0x30000000 0x00010000
+		  3 0 0x5 0x20000000 0x00010000>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x2 0x0 0x10000>;
+	};
+
+	fpga: board-control@3,0 {
+		compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
+		reg = <0x3 0x0 0x0000100>;
+	};
+};
+
 &duart0 {
 	status = "okay";
 };
@@ -118,6 +142,10 @@
 	status = "okay";
 };
 
+&esdhc {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 8a04fbb25cb4..213abb72de93 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -94,6 +94,22 @@
 	};
 };
 
+&ifc {
+	ranges = <0 0 0x5 0x30000000 0x00010000
+		  2 0 0x5 0x20000000 0x00010000>;
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x0 0x0 0x10000>;
+	};
+
+	fpga: board-control@2,0 {
+		compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
+		reg = <0x2 0x0 0x0000100>;
+	};
+};
+
 &duart0 {
 	status = "okay";
 };
@@ -102,6 +118,10 @@
 	status = "okay";
 };
 
+&esdhc {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 2946fd797121..df16284ec5ec 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -44,6 +44,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "fsl,ls1088a";
@@ -61,6 +62,7 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
 			clocks = <&clockgen 1 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -89,6 +91,7 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x100>;
 			clocks = <&clockgen 1 1>;
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@101 {
@@ -153,6 +156,91 @@
 			clocks = <&sysclk>;
 		};
 
+		tmu: tmu@1f80000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f80000 0x0 0x10000>;
+			interrupts = <0 23 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+			fsl,tmu-calibration =
+				/* Calibration data group 1 */
+				<0x00000000 0x00000026
+				0x00000001 0x0000002d
+				0x00000002 0x00000032
+				0x00000003 0x00000039
+				0x00000004 0x0000003f
+				0x00000005 0x00000046
+				0x00000006 0x0000004d
+				0x00000007 0x00000054
+				0x00000008 0x0000005a
+				0x00000009 0x00000061
+				0x0000000a 0x0000006a
+				0x0000000b 0x00000071
+				/* Calibration data group 2 */
+				0x00010000 0x00000025
+				0x00010001 0x0000002c
+				0x00010002 0x00000035
+				0x00010003 0x0000003d
+				0x00010004 0x00000045
+				0x00010005 0x0000004e
+				0x00010006 0x00000057
+				0x00010007 0x00000061
+				0x00010008 0x0000006b
+				0x00010009 0x00000076
+				/* Calibration data group 3 */
+				0x00020000 0x00000029
+				0x00020001 0x00000033
+				0x00020002 0x0000003d
+				0x00020003 0x00000049
+				0x00020004 0x00000056
+				0x00020005 0x00000061
+				0x00020006 0x0000006d
+				/* Calibration data group 4 */
+				0x00030000 0x00000021
+				0x00030001 0x0000002a
+				0x00030002 0x0000003c
+				0x00030003 0x0000004e>;
+			little-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		thermal-zones {
+			cpu_thermal: cpu-thermal {
+				polling-delay-passive = <1000>;
+				polling-delay = <5000>;
+				thermal-sensors = <&tmu 0>;
+
+				trips {
+					cpu_alert: cpu-alert {
+						temperature = <85000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+
+					cpu_crit: cpu-crit {
+						temperature = <95000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&cpu_alert>;
+						cooling-device =
+							<&cpu0 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+					};
+
+					map1 {
+						trip = <&cpu_alert>;
+						cooling-device =
+							<&cpu4 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
+
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x0 0x21c0500 0x0 0x100>;
@@ -216,10 +304,6 @@
 			little-endian;
 			#address-cells = <2>;
 			#size-cells = <1>;
-
-			ranges = <0 0 0x5 0x80000000 0x08000000
-				  2 0 0x5 0x30000000 0x00010000
-				  3 0 0x5 0x20000000 0x00010000>;
 			status = "disabled";
 		};
 
@@ -263,11 +347,26 @@
 			status = "disabled";
 		};
 
+		esdhc: esdhc@2140000 {
+			compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <0 28 0x4>; /* Level high type */
+			clock-frequency = <0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
 		sata: sata@3200000 {
 			compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci";
-			reg = <0x0 0x3200000 0x0 0x10000>;
+			reg = <0x0 0x3200000 0x0 0x10000>,
+				<0x0 0x20140520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
 			interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 3>;
+			dma-coherent;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index c1e76dfca48e..ed209cd57283 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -1,7 +1,8 @@
 /*
  * Device Tree file for Freescale LS2080a QDS Board.
  *
- * Copyright (C) 2015-17, Freescale Semiconductor
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  * Bhupesh Sharma <bhupesh.sharma@freescale.com>
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index 18ad19587311..67ec3f9c81a1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -1,7 +1,8 @@
 /*
  * Device Tree file for Freescale LS2080a RDB Board.
  *
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  * Bhupesh Sharma <bhupesh.sharma@freescale.com>
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
index 290604b0a603..3ee718f0aaf8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree file for Freescale LS2080a software Simulator model
  *
- * Copyright (C) 2014-2015, Freescale Semiconductor
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
  *
  * Bhupesh Sharma <bhupesh.sharma@freescale.com>
  *
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 46a26c021421..d789c6814e6a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Include file for Freescale Layerscape-2080A family SoC.
  *
- * Copyright (C) 2014-2016, Freescale Semiconductor
+ * Copyright 2014-2016 Freescale Semiconductor, Inc.
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  * Bhupesh Sharma <bhupesh.sharma@freescale.com>
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
index ebcd6ee4da0d..4a1df5ce3229 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
@@ -1,7 +1,8 @@
 /*
  * Device Tree file for Freescale LS2088A QDS Board.
  *
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
index 5992dc130faa..a76d4b4debd1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -1,7 +1,8 @@
 /*
  * Device Tree file for Freescale LS2088A RDB Board.
  *
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index 33ce404cf7e4..5c695c658056 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -1,7 +1,8 @@
 /*
  * Device Tree Include file for Freescale Layerscape-2088A family SoC.
  *
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index 8b6204845973..b2374469a830 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -1,7 +1,8 @@
 /*
  * Device Tree file for Freescale LS2080A QDS Board.
  *
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
@@ -45,6 +46,7 @@
  */
 
 &esdhc {
+	mmc-hs200-1_8v;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 3737587ffb33..29af54be2665 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -1,7 +1,8 @@
 /*
  * Device Tree file for Freescale LS2080A RDB Board.
  *
- * Copyright (C) 2016-17, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
@@ -45,6 +46,10 @@
  */
 
 &esdhc {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index abb2fff7d162..94cdd3045037 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -1,7 +1,8 @@
 /*
  * Device Tree Include file for Freescale Layerscape-2080A family SoC.
  *
- * Copyright (C) 2016-2017, Freescale Semiconductor
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
@@ -471,7 +472,7 @@
 			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
 			interrupts = <0 28 0x4>; /* Level high type */
-			clock-frequency = <0>;	/* Updated by bootloader */
+			clocks = <&clockgen 4 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
 			little-endian;
diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
new file mode 100644
index 000000000000..c3c2be4f5072
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
@@ -0,0 +1,71 @@
+/*
+ * QorIQ BMan Portals device tree
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&bportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		/*
+		 * bootloader fix-ups are expected to provide the
+		 * "fsl,bman-portal-<hardware revision>" compatible
+		 */
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x4000000 0x4000>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x4010000 0x4000>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x4020000 0x4000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@30000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x30000 0x4000>, <0x4030000 0x4000>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@40000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x40000 0x4000>, <0x4040000 0x4000>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@50000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x50000 0x4000>, <0x4050000 0x4000>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@60000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x60000 0x4000>, <0x4060000 0x4000>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@70000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x70000 0x4000>, <0x4070000 0x4000>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@80000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x80000 0x4000>, <0x4080000 0x4000>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
new file mode 100644
index 000000000000..ecdffe731b98
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -0,0 +1,42 @@
+/*
+ * QorIQ FMan v3 10g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+	fman0_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x90000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb0000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+		pcsphy-handle = <&pcsphy6>;
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+
+		pcsphy6: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
new file mode 100644
index 000000000000..a7f6af56b6a5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -0,0 +1,42 @@
+/*
+ * QorIQ FMan v3 10g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+	fman0_rx_0x11: port@91000 {
+		cell-index = <0x11>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x91000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x31: port@b1000 {
+		cell-index = <0x31>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb1000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f2000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+		pcsphy-handle = <&pcsphy7>;
+	};
+
+	mdio@f3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf3000 0x1000>;
+
+		pcsphy7: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
new file mode 100644
index 000000000000..d600786719fb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy0>;
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+
+		pcsphy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
new file mode 100644
index 000000000000..3c0b76d43043
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ FMan v3 1g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy1>;
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+
+		pcsphy1: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
new file mode 100644
index 000000000000..89633afca26a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ FMan v3 1g port #2 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman0_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy2>;
+	};
+
+	mdio@e5000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe5000 0x1000>;
+
+		pcsphy2: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
new file mode 100644
index 000000000000..87c2b705b1f9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ FMan v3 1g port #3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman0_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy3>;
+	};
+
+	mdio@e7000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe7000 0x1000>;
+
+		pcsphy3: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
new file mode 100644
index 000000000000..8f4d74b96b67
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ FMan v3 1g port #4 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman0_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy4>;
+	};
+
+	mdio@e9000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe9000 0x1000>;
+
+		pcsphy4: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
new file mode 100644
index 000000000000..d534f770f729
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ FMan v3 1g port #5 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0d: port@8d000 {
+		cell-index = <0xd>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8d000 0x1000>;
+	};
+
+	fman0_tx_0x2d: port@ad000 {
+		cell-index = <0x2d>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xad000 0x1000>;
+	};
+
+	ethernet@ea000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-memac";
+		reg = <0xea000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy5>;
+	};
+
+	mdio@eb000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xeb000 0x1000>;
+
+		pcsphy5: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
new file mode 100644
index 000000000000..4dd06767f839
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -0,0 +1,81 @@
+/*
+ * QorIQ FMan v3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+fman0: fman@1a00000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0x0 0x0 0x1a00000 0x100000>;
+	reg = <0x0 0x1a00000 0x0 0x100000>;
+	interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x800 0x10>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x60000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	fman0_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman0_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x87000 0x1000>;
+	};
+
+	mdio0: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	xmdio0: mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+
+	ptp_timer0: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
new file mode 100644
index 000000000000..2a9aa060efda
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
@@ -0,0 +1,80 @@
+/*
+ * QorIQ QMan Portals device tree
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+ */
+
+&qportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		/*
+		 * bootloader fix-ups are expected to provide the
+		 * "fsl,bman-portal-<hardware revision>" compatible
+		 */
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x4000000 0x4000>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <0>;
+	};
+
+	qportal1: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x4010000 0x4000>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <1>;
+	};
+
+	qportal2: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x4020000 0x4000>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <2>;
+	};
+
+	qportal3: qman-portal@30000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x30000 0x4000>, <0x4030000 0x4000>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <3>;
+	};
+
+	qportal4: qman-portal@40000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x40000 0x4000>, <0x4040000 0x4000>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <4>;
+	};
+
+	qportal5: qman-portal@50000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x50000 0x4000>, <0x4050000 0x4000>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <5>;
+	};
+
+	qportal6: qman-portal@60000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x60000 0x4000>, <0x4060000 0x4000>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <6>;
+	};
+
+	qportal7: qman-portal@70000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x70000 0x4000>, <0x4070000 0x4000>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <7>;
+	};
+
+	qportal8: qman-portal@80000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x80000 0x4000>, <0x4080000 0x4000>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <8>;
+	};
+};