aboutsummaryrefslogtreecommitdiff
path: root/drivers/mailbox
AgeCommit message (Collapse)Author
2019-03-11mailbox: imx: keep MU irq working during suspend/resumeAnson Huang
During noirq suspend phase, mailbox MU irq will be masked but many drivers still need to communicate with system controller firmware via mailbox, if MU irq is masked, it will cause RPC timeout as below: [ 23.372103] imx-scu scu: RPC send msg timeout Setting MU irq to be wakeup source is NOT working as GIC driver does NOT have .irq_set_wake implemented, so to support suspend/resume, just make imx mailbox driver NOT suspend, since MU is always a wakeup source on i.MX platforms with system controller inside, and its power/clock is maintained by system controller, mailbox driver no need to manage them. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-03-06mailbox: ZynqMP IPI mailbox controllerWendy Liang
This patch is to introduce ZynqMP IPI mailbox controller driver to use the ZynqMP IPI block as mailboxes. Signed-off-by: Wendy Liang <wendy.liang@xilinx.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-03-06mailbox: stm32-ipcc: remove useless device_init_wakeup callFabien Dessenne
If the "wakeup-source" property does not exist there is no need to call device_init_wakeup("false") at probe. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-03-06mailbox: stm32-ipcc: do not enable wakeup source by defaultFabien Dessenne
By default do not enable the wakeup source. This lets the userspace application decide whether the wakeup source shall be enabled or not. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-03-06mailbox: mailbox-test: fix null pointer if no mmioFabien Dessenne
Fix null pointer issue if resource_size is called with no ioresource. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-03-06mailbox: mailbox-test: fix debugfs in multi-instancesFabien Dessenne
Create one debug entry directory per instance to support the multi instantiation. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-03-06mailbox: tegra-hsp: mark suspend function as __maybe_unusedArnd Bergmann
We get a warning about this being unused when CONFIG_PM is disabled: drivers/mailbox/tegra-hsp.c:782:12: error: 'tegra_hsp_resume' defined but not used [-Werror=unused-function] Fixes: 9a63f0f40599 ("mailbox: tegra-hsp: Add suspend/resume support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-02-18mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush timeout issueRayagonda Kokatanur
RING_CONTROL reg was not written due to wrong address, hence all the subsequent ring flush was timing out. Fixes: a371c10ea4b3 ("mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-02-18mailbox: Export mbox_flush()Thierry Reding
The mbox_flush() function can be used by drivers that are built as modules, so the function needs to be exported. Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: tegra-hsp: Use device-managed registration APIThierry Reding
In order to get rid of a lot of cleanup boilerplate code, use the device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: tegra-hsp: use devm_kstrdup_const()Bartosz Golaszewski
Use devm_kstrdup_const() in the tegra-hsp driver. This mostly serves as an example of how to use this new routine to shrink driver code. Also use devm_kzalloc() instead of regular kzalloc() to shrink the driver even more. Doorbell objects are only removed in the driver's remove callback so it's safe to convert all memory allocations to devres. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: tegra-hsp: Add suspend/resume supportThierry Reding
Upon resuming from a system sleep state, the interrupts for all active shared mailboxes need to be reenabled, otherwise they will not work. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: tegra-hsp: Add support for shared mailboxesThierry Reding
The Tegra HSP block supports 'shared mailboxes' that are simple 32-bit registers consisting of a FULL bit in MSB position and 31 bits of data. The hardware can be configured to trigger interrupts when a mailbox is empty or full. Add support for these shared mailboxes to the HSP driver. The initial use for the mailboxes is the Tegra Combined UART. For this purpose, we use interrupts to receive data, and spinning to wait for the transmit mailbox to be emptied to minimize unnecessary overhead. Based on work by Mikko Perttunen <mperttunen@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: Allow multiple controllers per deviceMikko Perttunen
Look through the whole controller list when mapping device tree phandles to controllers instead of stopping at the first one. Each controller is intended to only contain one kind of mailbox, but some devices (like Tegra HSP) implement multiple kinds and use the same device tree node for all of them. As such, we need to allow multiple mbox_controllers per device tree node. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: Support blocking transfers in atomic contextThierry Reding
The mailbox framework supports blocking transfers via completions for clients that can sleep. In order to support blocking transfers in cases where the transmission is not permitted to sleep, add a new ->flush() callback that controller drivers can implement to busy loop until the transmission has been completed. A new mbox_flush() function can be called by mailbox consumers in atomic context to make sure a transfer has completed. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: ti-msgmgr: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: stm32-ipcc: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: rockchip: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: qcom-apcs: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: platform-mhu: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: omap: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: mtk-cmdq: Remove needless devm_kfree() callsThierry Reding
Memory allocated through device-managed functions doesn't need to be explicitly freed, so these calls can be removed. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: mtk-cmdq: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: xgene-slimpro: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: sti: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: altera: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: imx: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: hi6220: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: hi3660: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Tested-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: bcm-pdc: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: bcm-flexrm: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: bcm2835: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: arm-mhu: Use device-managed registration APIThierry Reding
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: Add device-managed registration functionsThierry Reding
Add device-managed equivalents of the mbox_controller_register() and mbox_controller_unregister() functions that can be used to have the devres infrastructure automatically unregister mailbox controllers on driver probe failure or driver removal. This can help remove a lot of boiler plate code from drivers. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-12mailbox: bcm2835: Switch to SPDX identifierStefan Wahren
Adopt the SPDX license identifier headers to ease license compliance management. Cc: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-12mailbox: ti-msgmgr: Off by one in ti_msgmgr_of_xlate()Dan Carpenter
The > comparison should be >= or we access one element beyond the end of the array. (The inst->qinsts[] array is allocated in the ti_msgmgr_probe() function and it has ->num_valid_queues elements.) Fixes: a2b79838b891 ("mailbox: ti-msgmgr: Add support for Secure Proxy") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-12mailbox: Hi3660: Fixup mailbox state machine malfunction issueKevin Wangtao
Current mailbox driver of Hi3660 release the mailbox directly before sending a new message which may cause last message lost and next message sending doesn't take effect actually. This patch fixs this issue by following the right progress below, each time before sending a message, mailbox driver will check whether the mailbox is in ready state, if last message has been acknowledged, the mailbox driver will clear the ack state to turn the mailbox to ready state again. Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com> Reviewed-and-tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-12mailbox: hi3660: constify mbox_chan_ops structureJulia Lawall
The mbox_chan_ops structure can be const as it is only stored in the ops field of an mbox_controller structure and this field is const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-10-29Merge tag 'mailbox-v4.20' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - convert print users to use the %pOFn format specifier - enable ti-msgmr driver for the K3 platform as well - add QCS404 to compatible list of QCOM's APCS IPC driver - minor spelling fixes toogle -> toggle - kzalloc failure catch in Mediatek driver * tag 'mailbox-v4.20' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: mediatek: Add check for possible failure of kzalloc mailbox: bcm-flexrm-mailbox: fix spelling mistake "toogle" -> "toggle" mailbox: qcom: Add QCS404 APPS Global compatible drivers: mailbox: Make ti-msgmr driver depend on ARCH_K3 mailbox: Convert to using %pOFn instead of device_node.name
2018-09-29mailbox: mediatek: Add check for possible failure of kzallocHoulong Wei
The patch 623a6143a845("mailbox: mediatek: Add Mediatek CMDQ driver") introduce the following static checker warning: drivers/mailbox/mtk-cmdq-mailbox.c:366 cmdq_mbox_send_data() error: potential null dereference 'task'. (kzalloc returns null) Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Houlong Wei <houlong.wei@mediatek.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29mailbox: bcm-flexrm-mailbox: fix spelling mistake "toogle" -> "toggle"Colin Ian King
Trivial fix to spelling mistake in function name flexrm_flip_header_toogle, rename it to flexrm_flip_header_toggle. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29mailbox: qcom: Add QCS404 APPS Global compatibleBjorn Andersson
Add support for the QCS404 APPS Global block with IPC register at offset 8. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29drivers: mailbox: Make ti-msgmr driver depend on ARCH_K3Nishanth Menon
ti-msgmr driver can support K3 platforms as well. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29mailbox: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-10mailbox: PCC: handle parse errorDavid Arcari
acpi_pcc_probe() calls acpi_table_parse_entries_array() but fails to check for an error return. This in turn can result in calling kcalloc() with a negative count as well as emitting the following misleading erorr message: [ 2.642015] Could not allocate space for PCC mbox channels Fixes: 8f8027c5f935 (mailbox: PCC: erroneous error message when parsing ACPI PCCT) Signed-off-by: David Arcari <darcari@redhat.com> Reviewed-by: Al Stone <ahs3@redhat.com> Cc: 4.18+ <stable@vger.kernel.org> # 4.18+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-15mailbox: Add support for i.MX messaging unitOleksij Rempel
The i.MX Messaging Unit is a two side block which allows applications implement communication over this sides. The MU includes the following features: - Messaging control by interrupts or by polling - Four general-purpose interrupt requests reflected to the other side - Three general-purpose flags reflected to the other side - Four receive registers with maskable interrupt - Four transmit registers with maskable interrupt Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-15mailbox: add MODULE_LICENSE() for mtk-cmdq-mailbox.cRandy Dunlap
Fix missing MODULE_LICENSE() in mtk-cmdq-mailbox.c: WARNING: modpost: missing MODULE_LICENSE() in drivers/mailbox/mtk-cmdq-mailbox.o Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: <linux-mediatek@lists.infradead.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Houlong Wei <houlong.wei@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: mediatek: Add Mediatek CMDQ driverHoulong Wei
This patch is first version of Mediatek Command Queue(CMDQ) driver. The CMDQ is used to help write registers with critical time limitation, such as updating display configuration during the vblank. It controls Global Command Engine (GCE) hardware to achieve this requirement. Currently, CMDQ only supports display related hardwares, but we expect it can be extended to other hardwares for future requirements. Signed-off-by: Houlong Wei <houlong.wei@mediatek.com> Signed-off-by: HS Liao <hs.liao@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Add support for Secure ProxyNishanth Menon
Secure Proxy is another communication scheme in Texas Instrument's devices intended to provide an unique communication path from various processors in the System on Chip(SoC) to a central System Controller. Secure proxy is, in effect, an evolution of current generation Message Manager hardware block found in K2G devices. However the following changes have taken place: Secure Proxy instance exposes "threads" or "proxies" which is primary representation of "a" communication channel. Each thread is preconfigured by System controller configuration based on SoC usage requirements. Secure proxy by itself represents a single "queue" of communication but allows the proxies to be independently operated. Each Secure proxy thread can uniquely have their own error and threshold interrupts allowing for more fine control of IRQ handling. Provide the driver support for Secure Proxy and thread instances. NOTE: Secure proxy configuration is only done by System Controller, hence these are assumed to be pre-configured instances. See AM65x Technical Reference Manual (SPRUID7, April 2018) for further details: http://www.ti.com/lit/pdf/spruid7 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Move the memory region name to descriptorNishanth Menon
For newer generation of the hardware, the naming of the region is decided at integration level and there could be additional regions as well. Hence move the region naming to be described from compatible descriptor. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>