Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: qla2xxx, qedf, smartpqi,
  hpsa, lpfc, ufs, mpt3sas, ibmvfc and hisi_sas. Plus number of minor
  changes, spelling fixes and other trivia"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (298 commits)
  scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session()
  scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory
  scsi: qla2xxx: Fix hardirq-unsafe locking
  scsi: qla2xxx: Complain loudly about reference count underflow
  scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware
  scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures
  scsi: qla2xxx: Check the size of firmware data structures at compile time
  scsi: qla2xxx: Pass little-endian values to the firmware
  scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands
  scsi: qla2xxx: Use an on-stack completion in qla24xx_control_vp()
  scsi: qla2xxx: Make qla24xx_async_abort_cmd() static
  scsi: qla2xxx: Remove unnecessary locking from the target code
  scsi: qla2xxx: Remove qla_tgt_cmd.released
  scsi: qla2xxx: Complain if a command is released that is owned by the firmware
  scsi: qla2xxx: target: Fix offline port handling and host reset handling
  scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending()
  scsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd()
  scsi: qla2xxx: Simplify qlt_send_term_imm_notif()
  scsi: qla2xxx: Fix use-after-free issues in qla2xxx_qpair_sp_free_dma()
  scsi: qla2xxx: Fix a qla24xx_enable_msix() error path
  ...

3 files changed, 46 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
index a04a4989ec7f..02347b017abd 100644
--- a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
+++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
@@ -5,8 +5,9 @@ Each UFS controller instance should have its own node.
 Please see the ufshcd-pltfrm.txt for a list of all available properties.
 
 Required properties:
-- compatible	: Compatible list, contains the following controller:
-			"cdns,ufshc"
+- compatible	: Compatible list, contains one of the following controllers:
+			"cdns,ufshc" - Generic CDNS HCI,
+			"cdns,ufshc-m31-16nm" - CDNS UFS HC + M31 16nm PHY
 		  complemented with the JEDEC version:
 			"jedec,ufs-2.0"
 
diff --git a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt b/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt
new file mode 100644
index 000000000000..72aab8547308
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt
@@ -0,0 +1,43 @@
+* Mediatek Universal Flash Storage (UFS) Host Controller
+
+UFS nodes are defined to describe on-chip UFS hardware macro.
+Each UFS Host Controller should have its own node.
+
+To bind UFS PHY with UFS host controller, the controller node should
+contain a phandle reference to UFS M-PHY node.
+
+Required properties for UFS nodes:
+- compatible         : Compatible list, contains the following controller:
+                       "mediatek,mt8183-ufshci" for MediaTek UFS host controller
+                       present on MT81xx chipsets.
+- reg                : Address and length of the UFS register set.
+- phys               : phandle to m-phy.
+- clocks             : List of phandle and clock specifier pairs.
+- clock-names        : List of clock input name strings sorted in the same
+                       order as the clocks property. "ufs" is mandatory.
+                       "ufs": ufshci core control clock.
+- freq-table-hz      : Array of <min max> operating frequencies stored in the same
+                       order as the clocks property. If this property is not
+                       defined or a value in the array is "0" then it is assumed
+                       that the frequency is set by the parent clock or a
+                       fixed rate clock source.
+- vcc-supply         : phandle to VCC supply regulator node.
+
+Example:
+
+	ufsphy: phy@11fa0000 {
+		...
+	};
+
+	ufshci@11270000 {
+		compatible = "mediatek,mt8183-ufshci";
+		reg = <0 0x11270000 0 0x2300>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
+		phys = <&ufsphy>;
+
+		clocks = <&infracfg_ao INFRACFG_AO_UFS_CG>;
+		clock-names = "ufs";
+		freq-table-hz = <0 0>;
+
+		vcc-supply = <&mt_pmic_vemc_ldo_reg>;
+	};
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index f647c09bc62a..56bccde9953a 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -31,7 +31,6 @@ Optional properties:
 - vcc-max-microamp      : specifies max. load that can be drawn from vcc supply
 - vccq-max-microamp     : specifies max. load that can be drawn from vccq supply
 - vccq2-max-microamp    : specifies max. load that can be drawn from vccq2 supply
-- <name>-fixed-regulator : boolean property specifying that <name>-supply is a fixed regulator
 
 - clocks                : List of phandle and clock specifier pairs
 - clock-names           : List of clock input name strings sorted in the same
@@ -65,7 +64,6 @@ Example:
 		interrupts = <0 28 0>;
 
 		vdd-hba-supply = <&xxx_reg0>;
-		vdd-hba-fixed-regulator;
 		vcc-supply = <&xxx_reg1>;
 		vcc-supply-1p8;
 		vccq-supply = <&xxx_reg2>;