diff options
Diffstat (limited to 'Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts')
| -rw-r--r-- | Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts | 336 |
1 files changed, 0 insertions, 336 deletions
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts deleted file mode 100644 index e8139224..00000000 --- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-db.dts +++ /dev/null @@ -1,336 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * Device Tree file for Marvell Armada 8040 Development board platform
- */
-
-#include "armada-8040.dtsi"
-
-#define GPIO_ACTIVE_HIGH 0
-#define GPIO_ACTIVE_LOW 1
-
-/ {
- model = "Marvell Armada 8040 DB board";
- compatible = "marvell,armada8040-db", "marvell,armada8040",
- "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- aliases {
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp0_eth2;
- ethernet2 = &cp1_eth0;
- ethernet3 = &cp1_eth1;
- };
-
- cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
- compatible = "regulator-fixed";
- regulator-name = "cp0-usb3h0-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
- };
-
- cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
- compatible = "regulator-fixed";
- regulator-name = "cp0-usb3h1-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
- };
-
- cp0_usb3_0_phy: cp0-usb3-0-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp0_reg_usb3_0_vbus>;
- };
-
- cp0_usb3_1_phy: cp0-usb3-1-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp0_reg_usb3_1_vbus>;
- };
-
- cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus {
- compatible = "regulator-fixed";
- regulator-name = "cp1-usb3h0-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
- };
-
- cp1_usb3_0_phy: cp1-usb3-0-phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&cp1_reg_usb3_0_vbus>;
- };
-};
-
-&i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-};
-
-&spi0 {
- status = "okay";
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x200000>;
- };
- partition@400000 {
- label = "Filesystem";
- reg = <0x200000 0xce0000>;
- };
- };
- };
-};
-
-/* Accessible over the mini-USB CON9 connector on the main board */
-&uart0 {
- status = "okay";
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-/* CON6 on CP0 expansion */
-&cp0_pcie0 {
- status = "okay";
-};
-
-/* CON5 on CP0 expansion */
-&cp0_pcie2 {
- status = "okay";
-};
-
-&cp0_i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-
- /* U31 */
- expander0: pca9555@21 {
- compatible = "nxp,pca9555";
- pinctrl-names = "default";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x21>;
- };
-
- /* U25 */
- expander1: pca9555@25 {
- compatible = "nxp,pca9555";
- pinctrl-names = "default";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x25>;
- };
-
-};
-
-/* CON4 on CP0 expansion */
-&cp0_sata0 {
- status = "okay";
-};
-
-/* CON9 on CP0 expansion */
-&cp0_usb3_0 {
- usb-phy = <&cp0_usb3_0_phy>;
- status = "okay";
-};
-
-/* CON10 on CP0 expansion */
-&cp0_usb3_1 {
- usb-phy = <&cp0_usb3_1_phy>;
- status = "okay";
-};
-
-&cp0_mdio {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-&cp0_eth0 {
- status = "okay";
- phy-mode = "10gbase-kr";
-
- fixed-link {
- speed = <10000>;
- full-duplex;
- };
-};
-
-&cp0_eth2 {
- status = "okay";
- phy = <&phy1>;
- phy-mode = "rgmii-id";
-};
-
-/* CON6 on CP1 expansion */
-&cp1_pcie0 {
- status = "okay";
-};
-
-/* CON7 on CP1 expansion */
-&cp1_pcie1 {
- status = "okay";
-};
-
-/* CON5 on CP1 expansion */
-&cp1_pcie2 {
- status = "okay";
-};
-
-&cp1_i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-};
-
-&cp1_spi1 {
- status = "disabled";
-
- spi-flash@0 {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- compatible = "jedec,spi-nor";
- reg = <0x0>;
- spi-max-frequency = <20000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "Boot";
- reg = <0x0 0x200000>;
- };
- partition@200000 {
- label = "Filesystem";
- reg = <0x200000 0xd00000>;
- };
- partition@f00000 {
- label = "Boot_2nd";
- reg = <0xf00000 0x100000>;
- };
- };
- };
-};
-
-/*
- * Proper NAND usage will require DPR-76 to be in position 1-2, which disables
- * MDIO signal of CP1.
- */
-&cp1_nand_controller {
- pinctrl-0 = <&nand_pins>, <&nand_rb>;
- pinctrl-names = "default";
-
- nand@0 {
- reg = <0>;
- nand-rb = <0>;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x200000>;
- };
- partition@200000 {
- label = "Linux";
- reg = <0x200000 0xe00000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
- };
- };
-};
-
-/* CON4 on CP1 expansion */
-&cp1_sata0 {
- status = "okay";
-};
-
-/* CON9 on CP1 expansion */
-&cp1_usb3_0 {
- usb-phy = <&cp1_usb3_0_phy>;
- status = "okay";
-};
-
-/* CON10 on CP1 expansion */
-&cp1_usb3_1 {
- status = "okay";
-};
-
-&cp1_mdio {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-&cp1_ethernet {
- status = "okay";
-};
-
-&cp1_eth0 {
- status = "okay";
- phy-mode = "10gbase-kr";
-
- fixed-link {
- speed = <10000>;
- full-duplex;
- };
-};
-
-&cp1_eth1 {
- status = "okay";
- phy = <&phy0>;
- phy-mode = "rgmii-id";
-};
-
-&ap_sdhci0 {
- status = "okay";
- bus-width = <4>;
- non-removable;
-};
-
-&cp0_sdhci0 {
- status = "okay";
- bus-width = <8>;
- non-removable;
-};
|