1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
|
/*
* Copyright (c) 2014, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&soc {
led_flash0: qcom,camera-led-flash {
cell-index = <0>;
compatible = "qcom,camera-led-flash";
qcom,flash-type = <1>;
qcom,flash-source = <&pmi8994_flash0 &pmi8994_flash1>;
qcom,torch-source = <&pmi8994_torch0 &pmi8994_torch1>;
};
};
&cci {
actuator0: qcom,actuator@0 {
cell-index = <0>;
reg = <0x0>;
compatible = "qcom,actuator";
qcom,cci-master = <0>;
cam_vaf-supply = <&pm8994_l23>;
qcom,cam-vreg-name = "cam_vaf";
qcom,cam-vreg-type = <0>;
qcom,cam-vreg-min-voltage = <2800000>;
qcom,cam-vreg-max-voltage = <2800000>;
qcom,cam-vreg-op-mode = <100000>;
};
actuator1: qcom,actuator@1 {
cell-index = <1>;
reg = <0x1>;
compatible = "qcom,actuator";
qcom,cci-master = <0>;
cam_vaf-supply = <&pm8994_l23>;
qcom,cam-vreg-name = "cam_vaf";
qcom,cam-vreg-type = <0>;
qcom,cam-vreg-min-voltage = <2800000>;
qcom,cam-vreg-max-voltage = <2800000>;
qcom,cam-vreg-op-mode = <100000>;
};
qcom,camera@0 {
cell-index = <0>;
compatible = "qcom,camera";
reg = <0x0>;
qcom,csiphy-sd-index = <0>;
qcom,csid-sd-index = <0>;
qcom,mount-angle = <90>;
qcom,actuator-src = <&actuator0>;
qcom,led-flash-src = <&led_flash0>;
cam_vdig-supply = <&pm8994_l27>;
cam_vio-supply = <&pm8994_lvs1>;
cam_vana-supply = <&pm8994_l17>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
qcom,cam-vreg-type = <0 1 0>;
qcom,cam-vreg-min-voltage = <1050000 0 2700000>;
qcom,cam-vreg-max-voltage = <1050000 0 2700000>;
qcom,cam-vreg-op-mode = <105000 0 80000>;
qcom,gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_rear_active>;
pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_rear_suspend>;
gpios = <&msm_gpio 13 0>,
<&msm_gpio 92 0>,
<&msm_gpio 91 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
"CAM_RESET0",
"CAM_STANDBY0";
qcom,sensor-position = <0>;
qcom,sensor-mode = <0>;
qcom,cci-master = <0>;
status = "ok";
clocks = <&clock_mmss clk_mclk0_clk_src>,
<&clock_mmss clk_camss_mclk0_clk>;
clock-names = "cam_src_clk", "cam_clk";
};
qcom,camera@1 {
cell-index = <1>;
compatible = "qcom,camera";
reg = <0x1>;
qcom,csiphy-sd-index = <1>;
qcom,csid-sd-index = <1>;
qcom,mount-angle = <90>;
cam_vdig-supply = <&pm8994_l3>;
cam_vio-supply = <&pm8994_lvs1>;
cam_vana-supply = <&pm8994_l17>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
qcom,cam-vreg-type = <0 1 0>;
qcom,cam-vreg-min-voltage = <1200000 0 2700000>;
qcom,cam-vreg-max-voltage = <1200000 0 2700000>;
qcom,cam-vreg-op-mode = <105000 0 80000>;
qcom,gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_rear2_active>;
pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_rear2_suspend>;
gpios = <&msm_gpio 14 0>,
<&msm_gpio 94 0>,
<&msm_gpio 93 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
"CAM_RESET1",
"CAM_STANDBY1";
qcom,sensor-position = <0>;
qcom,sensor-mode = <0>;
qcom,cci-master = <0>;
status = "ok";
clocks = <&clock_mmss clk_mclk1_clk_src>,
<&clock_mmss clk_camss_mclk1_clk>;
clock-names = "cam_src_clk", "cam_clk";
};
qcom,camera@2 {
cell-index = <2>;
compatible = "qcom,camera";
reg = <0x02>;
qcom,csiphy-sd-index = <2>;
qcom,csid-sd-index = <2>;
qcom,mount-angle = <90>;
cam_vdig-supply = <&pm8994_l3>;
cam_vio-supply = <&pm8994_lvs1>;
cam_vana-supply = <&pm8994_l29>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
qcom,cam-vreg-type = <0 1 0>;
qcom,cam-vreg-min-voltage = <1200000 0 2800000>;
qcom,cam-vreg-max-voltage = <1200000 0 2800000>;
qcom,cam-vreg-op-mode = <105000 0 80000>;
qcom,gpio-no-mux = <0>;
pinctrl-names = "cam_default", "cam_suspend";
pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_front_active>;
pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_front_suspend>;
gpios = <&msm_gpio 15 0>,
<&msm_gpio 104 0>,
<&msm_gpio 105 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_RESET2",
"CAM_STANDBY2";
qcom,sensor-position = <1>;
qcom,sensor-mode = <0>;
qcom,cci-master = <0>;
status = "ok";
clocks = <&clock_mmss clk_mclk2_clk_src>,
<&clock_mmss clk_camss_mclk2_clk>;
clock-names = "cam_src_clk", "cam_clk";
};
};
|
