/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

&spmi_bus {
	#address-cells = <1>;
	#size-cells = <0>;
	interrupt-controller;
	#interrupt-cells = <3>;

	qcom,pmi8994@2 {
		spmi-slave-container;
		reg = <0x2>;
		#address-cells = <1>;
		#size-cells = <1>;

		pmi8994_revid: qcom,revid@100 {
			compatible = "qcom,qpnp-revid";
			reg = <0x100 0x100>;
		};

		pmi8994_gpios: gpios {
			spmi-dev-container;
			compatible = "qcom,qpnp-pin";
			gpio-controller;
			#gpio-cells = <2>;
			#address-cells = <1>;
			#size-cells = <1>;
			label = "pmi8994-gpio";

			gpio@c000 {
				reg = <0xc000 0x100>;
				qcom,pin-num = <1>;
			};

			gpio@c100 {
				reg = <0xc100 0x100>;
				qcom,pin-num = <2>;
			};

			gpio@c200 {
				reg = <0xc200 0x100>;
				qcom,pin-num = <3>;
			};

			gpio@c300 {
				reg = <0xc300 0x100>;
				qcom,pin-num = <4>;
			};

			gpio@c400 {
				reg = <0xc400 0x100>;
				qcom,pin-num = <5>;
			};

			gpio@c500 {
				reg = <0xc500 0x100>;
				qcom,pin-num = <6>;
			};

			gpio@c600 {
				reg = <0xc600 0x100>;
				qcom,pin-num = <7>;
			};

			gpio@c700 {
				reg = <0xc700 0x100>;
				qcom,pin-num = <8>;
			};

			gpio@c800 {
				reg = <0xc800 0x100>;
				qcom,pin-num = <9>;
			};

			gpio@c900 {
				reg = <0xc900 0x100>;
				qcom,pin-num = <10>;
			};
		};

		pmi8994_mpps: mpps {
			spmi-dev-container;
			compatible = "qcom,qpnp-pin";
			gpio-controller;
			#gpio-cells = <2>;
			#address-cells = <1>;
			#size-cells = <1>;
			label = "pmi8994-mpp";

			mpp@a000 {
				reg = <0xa000 0x100>;
				qcom,pin-num = <1>;
			};

			mpp@a100 {
				reg = <0xa100 0x100>;
				qcom,pin-num = <2>;
			};

			mpp@a200 {
				reg = <0xa200 0x100>;
				qcom,pin-num = <3>;
			};

			mpp@a300 {
				reg = <0xa300 0x100>;
				qcom,pin-num = <4>;
			};
		};

		pmi8994_vadc: vadc@3100 {
			compatible = "qcom,qpnp-vadc";
			reg = <0x3100 0x100>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <0x2 0x31 0x0>;
			interrupt-names = "eoc-int-en-set";
			qcom,adc-bit-resolution = <15>;
			qcom,adc-vdd-reference = <1800>;
			qcom,vadc-poll-eoc;
		};

		pmi8994_charger: pmi8994_otg_supply: qcom,qpnp-smbcharger {
			spmi-dev-container;
			compatible = "qcom,qpnp-smbcharger";
			#address-cells = <1>;
			#size-cells = <1>;

			qcom,iterm-ma = <100>;
			qcom,float-voltage-mv = <4350>;
			qcom,resume-delta-mv = <200>;
			qcom,bmd-pin-src = "bpd_thm";
			qcom,dc-psy-type = "Mains";
			qcom,dc-psy-ma = <1500>;
			qcom,bms-psy-name = "bms";
			qcom,thermal-mitigation = <1500 700 600 0>;
			regulator-name = "pmi8994_otg_vreg";

			qcom,chgr@1000 {
				reg = <0x1000 0x100>;
				interrupts =	<0x2 0x10 0x0>,
						<0x2 0x10 0x1>,
						<0x2 0x10 0x2>,
						<0x2 0x10 0x3>,
						<0x2 0x10 0x4>,
						<0x2 0x10 0x5>,
						<0x2 0x10 0x6>,
						<0x2 0x10 0x7>;

				interrupt-names =	"chg-error",
							"chg-inhibit",
							"chg-prechg-sft",
							"chg-complete-chg-sft",
							"chg-p2f-thr",
							"chg-rechg-thr",
							"chg-taper-thr",
							"chg-tcc-thr";
			};

			qcom,otg@1100 {
				reg = <0x1100 0x100>;
			};

			qcom,bat-if@1200 {
				reg = <0x1200 0x100>;
				interrupts =	<0x2 0x12 0x0>,
						<0x2 0x12 0x1>,
						<0x2 0x12 0x2>,
						<0x2 0x12 0x3>,
						<0x2 0x12 0x4>,
						<0x2 0x12 0x5>,
						<0x2 0x12 0x6>,
						<0x2 0x12 0x7>;

				interrupt-names =	"batt-hot",
							"batt-warm",
							"batt-cold",
							"batt-cool",
							"batt-ov",
							"batt-low",
							"batt-missing",
							"batt-term-missing";
			};

			qcom,usb-chgpth@1300 {
				reg = <0x1300 0x100>;
				interrupts =	<0x2 0x13 0x0>,
						<0x2 0x13 0x1>,
						<0x2 0x13 0x2>,
						<0x2 0x13 0x3>,
						<0x2 0x13 0x4>,
						<0x2 0x13 0x5>,
						<0x2 0x13 0x6>;

				interrupt-names =	"usbin-uv",
							"usbin-ov",
							"usbin-src-det",
							"otg-fail",
							"otg-oc",
							"aicl-done",
							"usbid-change";
			};

			qcom,dc-chgpth@1400 {
				reg = <0x1400 0x100>;
				interrupts =	<0x2 0x14 0x0>,
						<0x2 0x14 0x1>;

				interrupt-names =	"dcin-uv",
							"dcin-ov";
			};

			qcom,chgr-misc@1600 {
				reg = <0x1600 0x100>;
				interrupts =	<0x2 0x16 0x0>,
						<0x2 0x16 0x1>,
						<0x2 0x16 0x2>,
						<0x2 0x16 0x3>,
						<0x2 0x16 0x4>,
						<0x2 0x16 0x5>;

				interrupt-names =	"power-ok",
							"temp-shutdown",
							"safety-timeout",
							"flash-fail",
							"otst2",
							"otst3";
			};
		};

		pmi8994_fg: qcom,fg {
			spmi-dev-container;
			compatible = "qcom,qpnp-fg";
			#address-cells = <1>;
			#size-cells = <1>;
			status = "okay";

			qcom,fg-soc@4000 {
				status = "okay";
				reg = <0x4000 0x100>;
				interrupts =	<0x2 0x40 0x0>,
						<0x2 0x40 0x1>,
						<0x2 0x40 0x2>,
						<0x2 0x40 0x3>,
						<0x2 0x40 0x4>,
						<0x2 0x40 0x5>,
						<0x2 0x40 0x6>,
						<0x2 0x40 0x7>;

				interrupt-names =	"high-soc",
							"low-soc",
							"full-soc",
							"empty-soc",
							"delta-soc",
							"first-est-done",
							"sw-fallbk-ocv",
							"sw-fallbk-new-battrt-sts",
							"fg-soc-irq-count";
			};

			qcom,fg-adc-vbat@4254 {
				reg = <0x4254 0x1>;
			};

			qcom,fg-adc-ibat@4255 {
				reg = <0x4255 0x1>;
			};

			qcom,fg-memif@4400 {
				status = "okay";
				reg = <0x4400 0x100>;
				interrupts =	<0x2 0x44 0x0>,
						<0x2 0x44 0x1>;

				interrupt-names =	"mem-avail",
							"data-rcvry-sug";
			};
		};
	};

	qcom,pmi8994@3 {
		spmi-slave-container;
		reg = <0x3>;
		#address-cells = <1>;
		#size-cells = <1>;

		pwm@b100 {
			compatible = "qcom,qpnp-pwm";
			reg = <0xb100 0x100>,
			      <0xb042 0x7e>;
			reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
			qcom,channel-id = <0>;
			qcom,supported-sizes = <6>, <7>, <9>;
			qcom,ramp-index = <0>;
		};

		pwm@b200 {
			compatible = "qcom,qpnp-pwm";
			reg = <0xb200 0x100>,
			      <0xb042 0x7e>;
			reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
			qcom,channel-id = <1>;
			qcom,supported-sizes = <6>, <7>, <9>;
			qcom,ramp-index = <1>;
		};

		pwm@b300 {
			compatible = "qcom,qpnp-pwm";
			reg = <0xb300 0x100>,
			      <0xb042 0x7e>;
			reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
			qcom,channel-id = <2>;
			qcom,supported-sizes = <6>, <7>, <9>;
			qcom,ramp-index = <2>;
		};

		pwm@b400 {
			compatible = "qcom,qpnp-pwm";
			reg = <0xb400 0x100>,
			      <0xb042 0x7e>;
			reg-names = "qpnp-lpg-channel-base", "qpnp-lpg-lut-base";
			qcom,channel-id = <3>;
			qcom,supported-sizes = <6>, <7>, <9>;
			qcom,ramp-index = <3>;
		};

		qcom,leds@d800 {
			compatible = "qcom,qpnp-wled";
			reg = <0xd800 0x100>,
				<0xd900 0x100>,
				<0xdc00 0x100>,
				<0xde00 0x100>;
			reg-names = "qpnp-wled-ctrl-base",
					"qpnp-wled-sink-base",
					"qpnp-wled-ibb-base",
					"qpnp-wled-lab-base";
			status = "okay";
			linux,name = "wled";
			linux,default-trigger = "bkl-trigger";
			qcom,fdbk-output = "auto";
			qcom,vref-mv = <350>;
			qcom,switch-freq-khz = <800>;
			qcom,ovp-mv = <29500>;
			qcom,ilim-ma = <980>;
			qcom,boost-duty-ns = <26>;
			qcom,mod-freq-khz = <19200>;
			qcom,dim-mode = "hybrid";
			qcom,dim-method = "linear";
			qcom,hyb-thres = <625>;
			qcom,sync-dly-us = <800>;
			qcom,fs-curr-ua = <16000>;
			qcom,en-phase-stag;
			qcom,ibb-pwrup-dly = <8>;
			qcom,led-strings-list = [00 01 02 03];
		};

		pmi8994_haptics: qcom,haptic@c000 {
			status = "disabled";
			compatible = "qcom,qpnp-haptic";
			reg = <0xc000 0x100>;
			interrupts = <0x3 0xc0 0x0>,
				     <0x3 0xc0 0x1>;
			interrupt-names = "sc-irq", "play-irq";
			qcom,play-mode = "direct";
			qcom,wave-play-rate-us = <5263>;
			qcom,actuator-type = "lra";
			qcom,wave-shape = "square";
			qcom,vmax-mv = <2000>;
			qcom,ilim-ma = <800>;
			qcom,sc-deb-cycles = <8>;
			qcom,int-pwm-freq-khz = <505>;
			qcom,brake-pattern = [00 00 03 03];
			qcom,use-play-irq;
			qcom,use-sc-irq;
			qcom,wave-samples = [3e 3e 3e 3e 3e 3e 3e 3e];
			qcom,wave-rep-cnt = <1>;
			qcom,wave-samp-rep-cnt = <1>;
		};

		qcom,leds@d000 {
			compatible = "qcom,leds-qpnp";
			reg = <0xd000 0x100>;
			label = "rgb";
			status = "okay";

			qcom,rgb_0 {
				label = "rgb";
				qcom,id = <3>;
				qcom,mode = "pwm";
				qcom,pwm-channel = <2>;
				qcom,pwm-us = <1000>;
				qcom,max-current = <12>;
				qcom,default-state = "off";
				linux,name = "red";
				linux,default-trigger =
					"battery-charging";
			};

			qcom,rgb_1 {
				label = "rgb";
				qcom,id = <4>;
				qcom,mode = "pwm";
				qcom,pwm-channel = <1>;
				qcom,pwm-us = <1000>;
				qcom,max-current = <12>;
				qcom,default-state = "off";
				linux,name = "green";
				linux,default-trigger = "battery-full";
			};

			qcom,rgb_2 {
				label = "rgb";
				qcom,id = <5>;
				qcom,mode = "pwm";
				qcom,pwm-channel = <0>;
				qcom,pwm-us = <1000>;
				qcom,max-current = <12>;
				qcom,default-state = "off";
				linux,name = "blue";
			};
		};

		qcom,leds@d300 {
			compatible = "qcom,qpnp-flash-led";
			status = "okay";
			reg = <0xd300 0x100>;
			label = "flash";
			qcom,headroom = <500>;
			qcom,startup-dly = <128>;
			qcom,clamp-curr = <200>;
			qcom,pmic-charger-support;
			qcom,self-check-enabled;
			qcom,thermal-derate-enabled;
			qcom,thermal-derate-threshold = <80>;
			qcom,thermal-derate-rate = "4_PERCENT";
			qcom,current-ramp-enabled;
			qcom,ramp_up_step = "27US";
			qcom,ramp_dn_step = "27US";
			qcom,vph-pwr-droop-enabled;
			qcom,vph-pwr-droop-threshold = <3200>;
			qcom,vph-pwr-droop-debounce-time = <10>;

			pmi8994_flash0: qcom,flash_0 {
				label = "flash";
				qcom,led-name = "led:flash_0";
				qcom,default-led-trigger =
						"flash0_trigger";
				qcom,max-current = <1000>;
				qcom,duration = <1280>;
				qcom,id = <0>;
				qcom,current = <625>;
			};

			pmi8994_flash1: qcom,flash_1 {
				label = "flash";
				qcom,led-name = "led:flash_1";
				qcom,default-led-trigger =
						"flash1_trigger";
				qcom,max-current = <1000>;
				qcom,duration = <1280>;
				qcom,id = <1>;
				qcom,current = <625>;
			};

			pmi8994_torch0: qcom,torch_0 {
				label = "torch";
				qcom,led-name = "led:torch_0";
				qcom,default-led-trigger =
						"torch0_trigger";
				qcom,max-current = <200>;
				qcom,id = <0>;
				qcom,current = <120>;
				boost-supply = <&pmi8994_boostbypass>;
				boost-voltage-max = <3600000>;
			};

			pmi8994_torch1: qcom,torch_1 {
				label = "torch";
				qcom,led-name = "led:torch_1";
				qcom,default-led-trigger =
						"torch1_trigger";
				qcom,max-current = <200>;
				qcom,id = <1>;
				qcom,current = <120>;
				boost-supply = <&pmi8994_boostbypass>;
				boost-voltage-max = <3600000>;
			};
		};
	};
};