ARM: dts: Add snapshot of MSM DT files

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>

1 files changed, 165 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/qcom/msm8994-camera-sensor-cdp.dtsi b/arch/arm64/boot/dts/qcom/msm8994-camera-sensor-cdp.dtsi
new file mode 100644
index 00000000000..38ba73eb3f4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-camera-sensor-cdp.dtsi
@@ -0,0 +1,165 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+&soc {
+	led_flash0: qcom,camera-led-flash {
+		cell-index = <0>;
+		compatible = "qcom,camera-led-flash";
+		qcom,flash-type = <1>;
+		qcom,flash-source = <&pmi8994_flash0 &pmi8994_flash1>;
+		qcom,torch-source = <&pmi8994_torch0 &pmi8994_torch1>;
+	};
+};
+&cci {
+	actuator0: qcom,actuator@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,actuator";
+		qcom,cci-master = <0>;
+		cam_vaf-supply = <&pm8994_l23>;
+		qcom,cam-vreg-name = "cam_vaf";
+		qcom,cam-vreg-type = <0>;
+		qcom,cam-vreg-min-voltage = <2800000>;
+		qcom,cam-vreg-max-voltage = <2800000>;
+		qcom,cam-vreg-op-mode = <100000>;
+	};
+
+	actuator1: qcom,actuator@1 {
+		cell-index = <1>;
+		reg = <0x1>;
+		compatible = "qcom,actuator";
+		qcom,cci-master = <0>;
+		cam_vaf-supply = <&pm8994_l23>;
+		qcom,cam-vreg-name = "cam_vaf";
+		qcom,cam-vreg-type = <0>;
+		qcom,cam-vreg-min-voltage = <2800000>;
+		qcom,cam-vreg-max-voltage = <2800000>;
+		qcom,cam-vreg-op-mode = <100000>;
+	};
+
+	qcom,camera@0 {
+		cell-index = <0>;
+		compatible = "qcom,camera";
+		reg = <0x0>;
+		qcom,csiphy-sd-index = <0>;
+		qcom,csid-sd-index = <0>;
+		qcom,mount-angle = <90>;
+		qcom,actuator-src = <&actuator0>;
+		qcom,led-flash-src = <&led_flash0>;
+		cam_vdig-supply = <&pm8994_l27>;
+		cam_vio-supply = <&pm8994_lvs1>;
+		cam_vana-supply = <&pm8994_l17>;
+		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
+		qcom,cam-vreg-type = <0 1 0>;
+		qcom,cam-vreg-min-voltage = <1050000 0 2700000>;
+		qcom,cam-vreg-max-voltage = <1050000 0 2700000>;
+		qcom,cam-vreg-op-mode = <105000 0 80000>;
+		qcom,gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_rear_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_rear_suspend>;
+		gpios = <&msm_gpio 13 0>,
+			<&msm_gpio 92 0>,
+			<&msm_gpio 91 0>;
+		qcom,gpio-reset = <1>;
+		qcom,gpio-standby = <2>;
+		qcom,gpio-req-tbl-num = <0 1 2>;
+		qcom,gpio-req-tbl-flags = <1 0 0>;
+		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
+					  "CAM_RESET0",
+					  "CAM_STANDBY0";
+		qcom,sensor-position = <0>;
+		qcom,sensor-mode = <0>;
+		qcom,cci-master = <0>;
+		status = "ok";
+		clocks = <&clock_mmss clk_mclk0_clk_src>,
+				<&clock_mmss clk_camss_mclk0_clk>;
+		clock-names = "cam_src_clk", "cam_clk";
+	};
+
+	qcom,camera@1 {
+		cell-index = <1>;
+		compatible = "qcom,camera";
+		reg = <0x1>;
+		qcom,csiphy-sd-index = <1>;
+		qcom,csid-sd-index = <1>;
+		qcom,mount-angle = <90>;
+		cam_vdig-supply = <&pm8994_l3>;
+		cam_vio-supply = <&pm8994_lvs1>;
+		cam_vana-supply = <&pm8994_l17>;
+		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
+		qcom,cam-vreg-type = <0 1 0>;
+		qcom,cam-vreg-min-voltage = <1200000 0 2700000>;
+		qcom,cam-vreg-max-voltage = <1200000 0 2700000>;
+		qcom,cam-vreg-op-mode = <105000 0 80000>;
+		qcom,gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_rear2_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_rear2_suspend>;
+		gpios = <&msm_gpio 14 0>,
+			<&msm_gpio 94 0>,
+			<&msm_gpio 93 0>;
+		qcom,gpio-reset = <1>;
+		qcom,gpio-standby = <2>;
+		qcom,gpio-req-tbl-num = <0 1 2>;
+		qcom,gpio-req-tbl-flags = <1 0 0>;
+		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
+					  "CAM_RESET1",
+					  "CAM_STANDBY1";
+		qcom,sensor-position = <0>;
+		qcom,sensor-mode = <0>;
+		qcom,cci-master = <0>;
+		status = "ok";
+		clocks = <&clock_mmss clk_mclk1_clk_src>,
+			<&clock_mmss clk_camss_mclk1_clk>;
+		clock-names = "cam_src_clk", "cam_clk";
+	};
+
+	qcom,camera@2 {
+		cell-index = <2>;
+		compatible = "qcom,camera";
+		reg = <0x02>;
+		qcom,csiphy-sd-index = <2>;
+		qcom,csid-sd-index = <2>;
+		qcom,mount-angle = <90>;
+		cam_vdig-supply = <&pm8994_l3>;
+		cam_vio-supply = <&pm8994_lvs1>;
+		cam_vana-supply = <&pm8994_l29>;
+		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
+		qcom,cam-vreg-type = <0 1 0>;
+		qcom,cam-vreg-min-voltage = <1200000 0 2800000>;
+		qcom,cam-vreg-max-voltage = <1200000 0 2800000>;
+		qcom,cam-vreg-op-mode = <105000 0 80000>;
+		qcom,gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_front_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_front_suspend>;
+		gpios = <&msm_gpio 15 0>,
+			<&msm_gpio 104 0>,
+			<&msm_gpio 105 0>;
+		qcom,gpio-reset = <1>;
+		qcom,gpio-standby = <2>;
+		qcom,gpio-req-tbl-num = <0 1 2>;
+		qcom,gpio-req-tbl-flags = <1 0 0>;
+		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
+					  "CAM_RESET2",
+					  "CAM_STANDBY2";
+		qcom,sensor-position = <1>;
+		qcom,sensor-mode = <0>;
+		qcom,cci-master = <0>;
+		status = "ok";
+		clocks = <&clock_mmss clk_mclk2_clk_src>,
+			<&clock_mmss clk_camss_mclk2_clk>;
+		clock-names = "cam_src_clk", "cam_clk";
+	};
+};