aboutsummaryrefslogtreecommitdiff
path: root/drivers/mfd/db8500-prcmu.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/db8500-prcmu.c')
-rw-r--r--drivers/mfd/db8500-prcmu.c1220
1 files changed, 886 insertions, 334 deletions
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index af8e0efedbe..ebc1e865822 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -30,6 +30,7 @@
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/regulator/db8500-prcmu.h>
#include <linux/regulator/machine.h>
+#include <asm/hardware/gic.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/db8500-regs.h>
@@ -39,11 +40,6 @@
/* Offset for the firmware version within the TCPM */
#define PRCMU_FW_VERSION_OFFSET 0xA4
-/* PRCMU project numbers, defined by PRCMU FW */
-#define PRCMU_PROJECT_ID_8500V1_0 1
-#define PRCMU_PROJECT_ID_8500V2_0 2
-#define PRCMU_PROJECT_ID_8400V2_0 3
-
/* Index of different voltages to be used when accessing AVSData */
#define PRCM_AVS_BASE 0x2FC
#define PRCM_AVS_VBB_RET (PRCM_AVS_BASE + 0x0)
@@ -137,6 +133,8 @@
#define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0)
#define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1)
#define PRCM_REQ_MB1_PLL_ON_OFF (PRCM_REQ_MB1 + 0x4)
+#define PLL_SOC0_OFF 0x1
+#define PLL_SOC0_ON 0x2
#define PLL_SOC1_OFF 0x4
#define PLL_SOC1_ON 0x8
@@ -266,6 +264,11 @@
#define WAKEUP_BIT_GPIO7 BIT(30)
#define WAKEUP_BIT_GPIO8 BIT(31)
+static struct {
+ bool valid;
+ struct prcmu_fw_version version;
+} fw_info;
+
/*
* This vector maps irq numbers to the bits in the bit field used in
* communication with the PRCMU firmware.
@@ -341,11 +344,13 @@ static struct {
* mb1_transfer - state needed for mailbox 1 communication.
* @lock: The transaction lock.
* @work: The transaction completion structure.
+ * @ape_opp: The current APE OPP.
* @ack: Reply ("acknowledge") data.
*/
static struct {
struct mutex lock;
struct completion work;
+ u8 ape_opp;
struct {
u8 header;
u8 arm_opp;
@@ -413,79 +418,102 @@ static struct {
static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
/* Spinlocks */
+static DEFINE_SPINLOCK(prcmu_lock);
static DEFINE_SPINLOCK(clkout_lock);
-static DEFINE_SPINLOCK(gpiocr_lock);
/* Global var to runtime determine TCDM base for v2 or v1 */
static __iomem void *tcdm_base;
struct clk_mgt {
- unsigned int offset;
+ void __iomem *reg;
u32 pllsw;
+ int branch;
+ bool clk38div;
+};
+
+enum {
+ PLL_RAW,
+ PLL_FIX,
+ PLL_DIV
};
static DEFINE_SPINLOCK(clk_mgt_lock);
-#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT_OFF), 0 }
+#define CLK_MGT_ENTRY(_name, _branch, _clk38div)[PRCMU_##_name] = \
+ { (PRCM_##_name##_MGT), 0 , _branch, _clk38div}
struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
- CLK_MGT_ENTRY(SGACLK),
- CLK_MGT_ENTRY(UARTCLK),
- CLK_MGT_ENTRY(MSP02CLK),
- CLK_MGT_ENTRY(MSP1CLK),
- CLK_MGT_ENTRY(I2CCLK),
- CLK_MGT_ENTRY(SDMMCCLK),
- CLK_MGT_ENTRY(SLIMCLK),
- CLK_MGT_ENTRY(PER1CLK),
- CLK_MGT_ENTRY(PER2CLK),
- CLK_MGT_ENTRY(PER3CLK),
- CLK_MGT_ENTRY(PER5CLK),
- CLK_MGT_ENTRY(PER6CLK),
- CLK_MGT_ENTRY(PER7CLK),
- CLK_MGT_ENTRY(LCDCLK),
- CLK_MGT_ENTRY(BMLCLK),
- CLK_MGT_ENTRY(HSITXCLK),
- CLK_MGT_ENTRY(HSIRXCLK),
- CLK_MGT_ENTRY(HDMICLK),
- CLK_MGT_ENTRY(APEATCLK),
- CLK_MGT_ENTRY(APETRACECLK),
- CLK_MGT_ENTRY(MCDECLK),
- CLK_MGT_ENTRY(IPI2CCLK),
- CLK_MGT_ENTRY(DSIALTCLK),
- CLK_MGT_ENTRY(DMACLK),
- CLK_MGT_ENTRY(B2R2CLK),
- CLK_MGT_ENTRY(TVCLK),
- CLK_MGT_ENTRY(SSPCLK),
- CLK_MGT_ENTRY(RNGCLK),
- CLK_MGT_ENTRY(UICCCLK),
+ CLK_MGT_ENTRY(SGACLK, PLL_DIV, false),
+ CLK_MGT_ENTRY(UARTCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(MSP02CLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(MSP1CLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(I2CCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(SDMMCCLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(SLIMCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(PER1CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(PER2CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(PER3CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(PER5CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(HDMICLK, PLL_FIX, false),
+ CLK_MGT_ENTRY(APEATCLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(APETRACECLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(MCDECLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(IPI2CCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(DSIALTCLK, PLL_FIX, false),
+ CLK_MGT_ENTRY(DMACLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(B2R2CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(TVCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(SSPCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(RNGCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(UICCCLK, PLL_FIX, false),
+};
+
+struct dsiclk {
+ u32 divsel_mask;
+ u32 divsel_shift;
+ u32 divsel;
+};
+
+static struct dsiclk dsiclk[2] = {
+ {
+ .divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK,
+ .divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT,
+ .divsel = PRCM_DSI_PLLOUT_SEL_PHI,
+ },
+ {
+ .divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK,
+ .divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT,
+ .divsel = PRCM_DSI_PLLOUT_SEL_PHI,
+ }
};
-static struct regulator *hwacc_regulator[NUM_HW_ACC];
-static struct regulator *hwacc_ret_regulator[NUM_HW_ACC];
-
-static bool hwacc_enabled[NUM_HW_ACC];
-static bool hwacc_ret_enabled[NUM_HW_ACC];
-
-static const char *hwacc_regulator_name[NUM_HW_ACC] = {
- [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp",
- [HW_ACC_SVAPIPE] = "hwacc-sva-pipe",
- [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp",
- [HW_ACC_SIAPIPE] = "hwacc-sia-pipe",
- [HW_ACC_SGA] = "hwacc-sga",
- [HW_ACC_B2R2] = "hwacc-b2r2",
- [HW_ACC_MCDE] = "hwacc-mcde",
- [HW_ACC_ESRAM1] = "hwacc-esram1",
- [HW_ACC_ESRAM2] = "hwacc-esram2",
- [HW_ACC_ESRAM3] = "hwacc-esram3",
- [HW_ACC_ESRAM4] = "hwacc-esram4",
+struct dsiescclk {
+ u32 en;
+ u32 div_mask;
+ u32 div_shift;
};
-static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = {
- [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp-ret",
- [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp-ret",
- [HW_ACC_ESRAM1] = "hwacc-esram1-ret",
- [HW_ACC_ESRAM2] = "hwacc-esram2-ret",
- [HW_ACC_ESRAM3] = "hwacc-esram3-ret",
- [HW_ACC_ESRAM4] = "hwacc-esram4-ret",
+static struct dsiescclk dsiescclk[3] = {
+ {
+ .en = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN,
+ .div_mask = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK,
+ .div_shift = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT,
+ },
+ {
+ .en = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN,
+ .div_mask = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK,
+ .div_shift = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT,
+ },
+ {
+ .en = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN,
+ .div_mask = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK,
+ .div_shift = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT,
+ }
};
/*
@@ -503,9 +531,6 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = {
/* PLLDIV=12, PLLSW=4 (PLLDDR) */
#define PRCMU_DSI_CLOCK_SETTING 0x0000008C
-/* PLLDIV=8, PLLSW=4 (PLLDDR) */
-#define PRCMU_DSI_CLOCK_SETTING_U8400 0x00000088
-
/* DPI 50000000 Hz */
#define PRCMU_DPI_CLOCK_SETTING ((1 << PRCMU_CLK_PLL_SW_SHIFT) | \
(16 << PRCMU_CLK_PLL_DIV_SHIFT))
@@ -514,9 +539,6 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = {
/* D=101, N=1, R=4, SELDIV2=0 */
#define PRCMU_PLLDSI_FREQ_SETTING 0x00040165
-/* D=70, N=1, R=3, SELDIV2=0 */
-#define PRCMU_PLLDSI_FREQ_SETTING_U8400 0x00030146
-
#define PRCMU_ENABLE_PLLDSI 0x00000001
#define PRCMU_DISABLE_PLLDSI 0x00000000
#define PRCMU_RELEASE_RESET_DSS 0x0000400C
@@ -528,30 +550,17 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = {
#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3
-static struct {
- u8 project_number;
- u8 api_version;
- u8 func_version;
- u8 errata;
-} prcmu_version;
-
-
int db8500_prcmu_enable_dsipll(void)
{
int i;
- unsigned int plldsifreq;
/* Clear DSIPLL_RESETN */
writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
/* Unclamp DSIPLL in/out */
writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
- if (prcmu_is_u8400())
- plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400;
- else
- plldsifreq = PRCMU_PLLDSI_FREQ_SETTING;
/* Set DSI PLL FREQ */
- writel(plldsifreq, PRCM_PLLDSI_FREQ);
+ writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ);
writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL);
/* Enable Escape clocks */
writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
@@ -583,12 +592,6 @@ int db8500_prcmu_disable_dsipll(void)
int db8500_prcmu_set_display_clocks(void)
{
unsigned long flags;
- unsigned int dsiclk;
-
- if (prcmu_is_u8400())
- dsiclk = PRCMU_DSI_CLOCK_SETTING_U8400;
- else
- dsiclk = PRCMU_DSI_CLOCK_SETTING;
spin_lock_irqsave(&clk_mgt_lock, flags);
@@ -596,7 +599,7 @@ int db8500_prcmu_set_display_clocks(void)
while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
cpu_relax();
- writel(dsiclk, PRCM_HDMICLK_MGT);
+ writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT);
writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT);
writel(PRCMU_DPI_CLOCK_SETTING, PRCM_LCDCLK_MGT);
@@ -608,43 +611,41 @@ int db8500_prcmu_set_display_clocks(void)
return 0;
}
-/**
- * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
- */
-void prcmu_enable_spi2(void)
+u32 db8500_prcmu_read(unsigned int reg)
+{
+ return readl(_PRCMU_BASE + reg);
+}
+
+void db8500_prcmu_write(unsigned int reg, u32 value)
{
- u32 reg;
unsigned long flags;
- spin_lock_irqsave(&gpiocr_lock, flags);
- reg = readl(PRCM_GPIOCR);
- writel(reg | PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR);
- spin_unlock_irqrestore(&gpiocr_lock, flags);
+ spin_lock_irqsave(&prcmu_lock, flags);
+ writel(value, (_PRCMU_BASE + reg));
+ spin_unlock_irqrestore(&prcmu_lock, flags);
}
-/**
- * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
- */
-void prcmu_disable_spi2(void)
+void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
{
- u32 reg;
+ u32 val;
unsigned long flags;
- spin_lock_irqsave(&gpiocr_lock, flags);
- reg = readl(PRCM_GPIOCR);
- writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR);
- spin_unlock_irqrestore(&gpiocr_lock, flags);
+ spin_lock_irqsave(&prcmu_lock, flags);
+ val = readl(_PRCMU_BASE + reg);
+ val = ((val & ~mask) | (value & mask));
+ writel(val, (_PRCMU_BASE + reg));
+ spin_unlock_irqrestore(&prcmu_lock, flags);
}
-bool prcmu_has_arm_maxopp(void)
+struct prcmu_fw_version *prcmu_get_fw_version(void)
{
- return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) &
- PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK;
+ return fw_info.valid ? &fw_info.version : NULL;
}
-bool prcmu_is_u8400(void)
+bool prcmu_has_arm_maxopp(void)
{
- return prcmu_version.project_number == PRCMU_PROJECT_ID_8400V2_0;
+ return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) &
+ PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK;
}
/**
@@ -787,6 +788,124 @@ int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
return 0;
}
+u8 db8500_prcmu_get_power_state_result(void)
+{
+ return readb(tcdm_base + PRCM_ACK_MB0_AP_PWRSTTR_STATUS);
+}
+
+/* This function decouple the gic from the prcmu */
+int db8500_prcmu_gic_decouple(void)
+{
+ u32 val = readl(PRCM_A9_MASK_REQ);
+
+ /* Set bit 0 register value to 1 */
+ writel(val | PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ,
+ PRCM_A9_MASK_REQ);
+
+ /* Make sure the register is updated */
+ readl(PRCM_A9_MASK_REQ);
+
+ /* Wait a few cycles for the gic mask completion */
+ udelay(1);
+
+ return 0;
+}
+
+/* This function recouple the gic with the prcmu */
+int db8500_prcmu_gic_recouple(void)
+{
+ u32 val = readl(PRCM_A9_MASK_REQ);
+
+ /* Set bit 0 register value to 0 */
+ writel(val & ~PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, PRCM_A9_MASK_REQ);
+
+ return 0;
+}
+
+#define PRCMU_GIC_NUMBER_REGS 5
+
+/*
+ * This function checks if there are pending irq on the gic. It only
+ * makes sense if the gic has been decoupled before with the
+ * db8500_prcmu_gic_decouple function. Disabling an interrupt only
+ * disables the forwarding of the interrupt to any CPU interface. It
+ * does not prevent the interrupt from changing state, for example
+ * becoming pending, or active and pending if it is already
+ * active. Hence, we have to check the interrupt is pending *and* is
+ * active.
+ */
+bool db8500_prcmu_gic_pending_irq(void)
+{
+ u32 pr; /* Pending register */
+ u32 er; /* Enable register */
+ void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE);
+ int i;
+
+ /* 5 registers. STI & PPI not skipped */
+ for (i = 0; i < PRCMU_GIC_NUMBER_REGS; i++) {
+
+ pr = readl_relaxed(dist_base + GIC_DIST_PENDING_SET + i * 4);
+ er = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ if (pr & er)
+ return true; /* There is a pending interrupt */
+ }
+
+ return false;
+}
+
+/*
+ * This function checks if there are pending interrupt on the
+ * prcmu which has been delegated to monitor the irqs with the
+ * db8500_prcmu_copy_gic_settings function.
+ */
+bool db8500_prcmu_pending_irq(void)
+{
+ u32 it, im;
+ int i;
+
+ for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) {
+ it = readl(PRCM_ARMITVAL31TO0 + i * 4);
+ im = readl(PRCM_ARMITMSK31TO0 + i * 4);
+ if (it & im)
+ return true; /* There is a pending interrupt */
+ }
+
+ return false;
+}
+
+/*
+ * This function checks if the specified cpu is in in WFI. It's usage
+ * makes sense only if the gic is decoupled with the db8500_prcmu_gic_decouple
+ * function. Of course passing smp_processor_id() to this function will
+ * always return false...
+ */
+bool db8500_prcmu_is_cpu_in_wfi(int cpu)
+{
+ return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 :
+ PRCM_ARM_WFI_STANDBY_WFI0;
+}
+
+/*
+ * This function copies the gic SPI settings to the prcmu in order to
+ * monitor them and abort/finish the retention/off sequence or state.
+ */
+int db8500_prcmu_copy_gic_settings(void)
+{
+ u32 er; /* Enable register */
+ void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE);
+ int i;
+
+ /* We skip the STI and PPI */
+ for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) {
+ er = readl_relaxed(dist_base +
+ GIC_DIST_ENABLE_SET + (i + 1) * 4);
+ writel(er, PRCM_ARMITMSK31TO0 + i * 4);
+ }
+
+ return 0;
+}
+
/* This function should only be called while mb0_transfer.lock is held. */
static void config_wakeups(void)
{
@@ -909,23 +1028,23 @@ int db8500_prcmu_get_arm_opp(void)
}
/**
- * prcmu_get_ddr_opp - get the current DDR OPP
+ * db8500_prcmu_get_ddr_opp - get the current DDR OPP
*
* Returns: the current DDR OPP
*/
-int prcmu_get_ddr_opp(void)
+int db8500_prcmu_get_ddr_opp(void)
{
return readb(PRCM_DDR_SUBSYS_APE_MINBW);
}
/**
- * set_ddr_opp - set the appropriate DDR OPP
+ * db8500_set_ddr_opp - set the appropriate DDR OPP
* @opp: The new DDR operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
* This function sets the operating point of the DDR.
*/
-int prcmu_set_ddr_opp(u8 opp)
+int db8500_prcmu_set_ddr_opp(u8 opp)
{
if (opp < DDR_100_OPP || opp > DDR_25_OPP)
return -EINVAL;
@@ -935,25 +1054,82 @@ int prcmu_set_ddr_opp(u8 opp)
return 0;
}
+
+/* Divide the frequency of certain clocks by 2 for APE_50_PARTLY_25_OPP. */
+static void request_even_slower_clocks(bool enable)
+{
+ void __iomem *clock_reg[] = {
+ PRCM_ACLK_MGT,
+ PRCM_DMACLK_MGT
+ };
+ unsigned long flags;
+ unsigned int i;
+
+ spin_lock_irqsave(&clk_mgt_lock, flags);
+
+ /* Grab the HW semaphore. */
+ while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+ cpu_relax();
+
+ for (i = 0; i < ARRAY_SIZE(clock_reg); i++) {
+ u32 val;
+ u32 div;
+
+ val = readl(clock_reg[i]);
+ div = (val & PRCM_CLK_MGT_CLKPLLDIV_MASK);
+ if (enable) {
+ if ((div <= 1) || (div > 15)) {
+ pr_err("prcmu: Bad clock divider %d in %s\n",
+ div, __func__);
+ goto unlock_and_return;
+ }
+ div <<= 1;
+ } else {
+ if (div <= 2)
+ goto unlock_and_return;
+ div >>= 1;
+ }
+ val = ((val & ~PRCM_CLK_MGT_CLKPLLDIV_MASK) |
+ (div & PRCM_CLK_MGT_CLKPLLDIV_MASK));
+ writel(val, clock_reg[i]);
+ }
+
+unlock_and_return:
+ /* Release the HW semaphore. */
+ writel(0, PRCM_SEM);
+
+ spin_unlock_irqrestore(&clk_mgt_lock, flags);
+}
+
/**
- * set_ape_opp - set the appropriate APE OPP
+ * db8500_set_ape_opp - set the appropriate APE OPP
* @opp: The new APE operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
* This function sets the operating point of the APE.
*/
-int prcmu_set_ape_opp(u8 opp)
+int db8500_prcmu_set_ape_opp(u8 opp)
{
int r = 0;
+ if (opp == mb1_transfer.ape_opp)
+ return 0;
+
mutex_lock(&mb1_transfer.lock);
+ if (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP)
+ request_even_slower_clocks(false);
+
+ if ((opp != APE_100_OPP) && (mb1_transfer.ape_opp != APE_100_OPP))
+ goto skip_message;
+
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
- writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
+ writeb(((opp == APE_50_PARTLY_25_OPP) ? APE_50_OPP : opp),
+ (tcdm_base + PRCM_REQ_MB1_APE_OPP));
writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb1_transfer.work);
@@ -962,17 +1138,24 @@ int prcmu_set_ape_opp(u8 opp)
(mb1_transfer.ack.ape_opp != opp))
r = -EIO;
+skip_message:
+ if ((!r && (opp == APE_50_PARTLY_25_OPP)) ||
+ (r && (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP)))
+ request_even_slower_clocks(true);
+ if (!r)
+ mb1_transfer.ape_opp = opp;
+
mutex_unlock(&mb1_transfer.lock);
return r;
}
/**
- * prcmu_get_ape_opp - get the current APE OPP
+ * db8500_prcmu_get_ape_opp - get the current APE OPP
*
* Returns: the current APE OPP
*/
-int prcmu_get_ape_opp(void)
+int db8500_prcmu_get_ape_opp(void)
{
return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_APE_OPP);
}
@@ -1056,7 +1239,9 @@ static int request_pll(u8 clock, bool enable)
{
int r = 0;
- if (clock == PRCMU_PLLSOC1)
+ if (clock == PRCMU_PLLSOC0)
+ clock = (enable ? PLL_SOC0_ON : PLL_SOC0_OFF);
+ else if (clock == PRCMU_PLLSOC1)
clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF);
else
return -EINVAL;
@@ -1081,132 +1266,6 @@ static int request_pll(u8 clock, bool enable)
}
/**
- * prcmu_set_hwacc - set the power state of a h/w accelerator
- * @hwacc_dev: The hardware accelerator (enum hw_acc_dev).
- * @state: The new power state (enum hw_acc_state).
- *
- * This function sets the power state of a hardware accelerator.
- * This function should not be called from interrupt context.
- *
- * NOTE! Deprecated, to be removed when all users switched over to use the
- * regulator framework API.
- */
-int prcmu_set_hwacc(u16 hwacc_dev, u8 state)
-{
- int r = 0;
- bool ram_retention = false;
- bool enable, enable_ret;
-
- /* check argument */
- BUG_ON(hwacc_dev >= NUM_HW_ACC);
-
- /* get state of switches */
- enable = hwacc_enabled[hwacc_dev];
- enable_ret = hwacc_ret_enabled[hwacc_dev];
-
- /* set flag if retention is possible */
- switch (hwacc_dev) {
- case HW_ACC_SVAMMDSP:
- case HW_ACC_SIAMMDSP:
- case HW_ACC_ESRAM1:
- case HW_ACC_ESRAM2:
- case HW_ACC_ESRAM3:
- case HW_ACC_ESRAM4:
- ram_retention = true;
- break;
- }
-
- /* check argument */
- BUG_ON(state > HW_ON);
- BUG_ON(state == HW_OFF_RAMRET && !ram_retention);
-
- /* modify enable flags */
- switch (state) {
- case HW_OFF:
- enable_ret = false;
- enable = false;
- break;
- case HW_ON:
- enable = true;
- break;
- case HW_OFF_RAMRET:
- enable_ret = true;
- enable = false;
- break;
- }
-
- /* get regulator (lazy) */
- if (hwacc_regulator[hwacc_dev] == NULL) {
- hwacc_regulator[hwacc_dev] = regulator_get(NULL,
- hwacc_regulator_name[hwacc_dev]);
- if (IS_ERR(hwacc_regulator[hwacc_dev])) {
- pr_err("prcmu: failed to get supply %s\n",
- hwacc_regulator_name[hwacc_dev]);
- r = PTR_ERR(hwacc_regulator[hwacc_dev]);
- goto out;
- }
- }
-
- if (ram_retention) {
- if (hwacc_ret_regulator[hwacc_dev] == NULL) {
- hwacc_ret_regulator[hwacc_dev] = regulator_get(NULL,
- hwacc_ret_regulator_name[hwacc_dev]);
- if (IS_ERR(hwacc_ret_regulator[hwacc_dev])) {
- pr_err("prcmu: failed to get supply %s\n",
- hwacc_ret_regulator_name[hwacc_dev]);
- r = PTR_ERR(hwacc_ret_regulator[hwacc_dev]);
- goto out;
- }
- }
- }
-
- /* set regulators */
- if (ram_retention) {
- if (enable_ret && !hwacc_ret_enabled[hwacc_dev]) {
- r = regulator_enable(hwacc_ret_regulator[hwacc_dev]);
- if (r < 0) {
- pr_err("prcmu_set_hwacc: ret enable failed\n");
- goto out;
- }
- hwacc_ret_enabled[hwacc_dev] = true;
- }
- }
-
- if (enable && !hwacc_enabled[hwacc_dev]) {
- r = regulator_enable(hwacc_regulator[hwacc_dev]);
- if (r < 0) {
- pr_err("prcmu_set_hwacc: enable failed\n");
- goto out;
- }
- hwacc_enabled[hwacc_dev] = true;
- }
-
- if (!enable && hwacc_enabled[hwacc_dev]) {
- r = regulator_disable(hwacc_regulator[hwacc_dev]);
- if (r < 0) {
- pr_err("prcmu_set_hwacc: disable failed\n");
- goto out;
- }
- hwacc_enabled[hwacc_dev] = false;
- }
-
- if (ram_retention) {
- if (!enable_ret && hwacc_ret_enabled[hwacc_dev]) {
- r = regulator_disable(hwacc_ret_regulator[hwacc_dev]);
- if (r < 0) {
- pr_err("prcmu_set_hwacc: ret disable failed\n");
- goto out;
- }
- hwacc_ret_enabled[hwacc_dev] = false;
- }
- }
-
-out:
- return r;
-}
-EXPORT_SYMBOL(prcmu_set_hwacc);
-
-/**
* db8500_prcmu_set_epod - set the state of a EPOD (power domain)
* @epod_id: The EPOD to set
* @epod_state: The new EPOD state
@@ -1375,7 +1434,7 @@ static int request_timclk(bool enable)
return 0;
}
-static int request_reg_clock(u8 clock, bool enable)
+static int request_clock(u8 clock, bool enable)
{
u32 val;
unsigned long flags;
@@ -1386,14 +1445,14 @@ static int request_reg_clock(u8 clock, bool enable)
while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
cpu_relax();
- val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
+ val = readl(clk_mgt[clock].reg);
if (enable) {
val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw);
} else {
clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK);
}
- writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
+ writel(val, clk_mgt[clock].reg);
/* Release the HW semaphore. */
writel(0, PRCM_SEM);
@@ -1413,7 +1472,7 @@ static int request_sga_clock(u8 clock, bool enable)
writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
}
- ret = request_reg_clock(clock, enable);
+ ret = request_clock(clock, enable);
if (!ret && !enable) {
val = readl(PRCM_CGATING_BYPASS);
@@ -1423,6 +1482,78 @@ static int request_sga_clock(u8 clock, bool enable)
return ret;
}
+static inline bool plldsi_locked(void)
+{
+ return (readl(PRCM_PLLDSI_LOCKP) &
+ (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
+ PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3)) ==
+ (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
+ PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3);
+}
+
+static int request_plldsi(bool enable)
+{
+ int r = 0;
+ u32 val;
+
+ writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
+ PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI), (enable ?
+ PRCM_MMIP_LS_CLAMP_CLR : PRCM_MMIP_LS_CLAMP_SET));
+
+ val = readl(PRCM_PLLDSI_ENABLE);
+ if (enable)
+ val |= PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
+ else
+ val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
+ writel(val, PRCM_PLLDSI_ENABLE);
+
+ if (enable) {
+ unsigned int i;
+ bool locked = plldsi_locked();
+
+ for (i = 10; !locked && (i > 0); --i) {
+ udelay(100);
+ locked = plldsi_locked();
+ }
+ if (locked) {
+ writel(PRCM_APE_RESETN_DSIPLL_RESETN,
+ PRCM_APE_RESETN_SET);
+ } else {
+ writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
+ PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI),
+ PRCM_MMIP_LS_CLAMP_SET);
+ val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
+ writel(val, PRCM_PLLDSI_ENABLE);
+ r = -EAGAIN;
+ }
+ } else {
+ writel(PRCM_APE_RESETN_DSIPLL_RESETN, PRCM_APE_RESETN_CLR);
+ }
+ return r;
+}
+
+static int request_dsiclk(u8 n, bool enable)
+{
+ u32 val;
+
+ val = readl(PRCM_DSI_PLLOUT_SEL);
+ val &= ~dsiclk[n].divsel_mask;
+ val |= ((enable ? dsiclk[n].divsel : PRCM_DSI_PLLOUT_SEL_OFF) <<
+ dsiclk[n].divsel_shift);
+ writel(val, PRCM_DSI_PLLOUT_SEL);
+ return 0;
+}
+
+static int request_dsiescclk(u8 n, bool enable)
+{
+ u32 val;
+
+ val = readl(PRCM_DSITVCLK_DIV);
+ enable ? (val |= dsiescclk[n].en) : (val &= ~dsiescclk[n].en);
+ writel(val, PRCM_DSITVCLK_DIV);
+ return 0;
+}
+
/**
* db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled.
* @clock: The clock for which the request is made.
@@ -1433,21 +1564,435 @@ static int request_sga_clock(u8 clock, bool enable)
*/
int db8500_prcmu_request_clock(u8 clock, bool enable)
{
- switch(clock) {
- case PRCMU_SGACLK:
+ if (clock == PRCMU_SGACLK)
return request_sga_clock(clock, enable);
- case PRCMU_TIMCLK:
+ else if (clock < PRCMU_NUM_REG_CLOCKS)
+ return request_clock(clock, enable);
+ else if (clock == PRCMU_TIMCLK)
return request_timclk(enable);
- case PRCMU_SYSCLK:
+ else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+ return request_dsiclk((clock - PRCMU_DSI0CLK), enable);
+ else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+ return request_dsiescclk((clock - PRCMU_DSI0ESCCLK), enable);
+ else if (clock == PRCMU_PLLDSI)
+ return request_plldsi(enable);
+ else if (clock == PRCMU_SYSCLK)
return request_sysclk(enable);
- case PRCMU_PLLSOC1:
+ else if ((clock == PRCMU_PLLSOC0) || (clock == PRCMU_PLLSOC1))
return request_pll(clock, enable);
+ else
+ return -EINVAL;
+}
+
+static unsigned long pll_rate(void __iomem *reg, unsigned long src_rate,
+ int branch)
+{
+ u64 rate;
+ u32 val;
+ u32 d;
+ u32 div = 1;
+
+ val = readl(reg);
+
+ rate = src_rate;
+ rate *= ((val & PRCM_PLL_FREQ_D_MASK) >> PRCM_PLL_FREQ_D_SHIFT);
+
+ d = ((val & PRCM_PLL_FREQ_N_MASK) >> PRCM_PLL_FREQ_N_SHIFT);
+ if (d > 1)
+ div *= d;
+
+ d = ((val & PRCM_PLL_FREQ_R_MASK) >> PRCM_PLL_FREQ_R_SHIFT);
+ if (d > 1)
+ div *= d;
+
+ if (val & PRCM_PLL_FREQ_SELDIV2)
+ div *= 2;
+
+ if ((branch == PLL_FIX) || ((branch == PLL_DIV) &&
+ (val & PRCM_PLL_FREQ_DIV2EN) &&
+ ((reg == PRCM_PLLSOC0_FREQ) ||
+ (reg == PRCM_PLLDDR_FREQ))))
+ div *= 2;
+
+ (void)do_div(rate, div);
+
+ return (unsigned long)rate;
+}
+
+#define ROOT_CLOCK_RATE 38400000
+
+static unsigned long clock_rate(u8 clock)
+{
+ u32 val;
+ u32 pllsw;
+ unsigned long rate = ROOT_CLOCK_RATE;
+
+ val = readl(clk_mgt[clock].reg);
+
+ if (val & PRCM_CLK_MGT_CLK38) {
+ if (clk_mgt[clock].clk38div && (val & PRCM_CLK_MGT_CLK38DIV))
+ rate /= 2;
+ return rate;
+ }
+
+ val |= clk_mgt[clock].pllsw;
+ pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
+
+ if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC0)
+ rate = pll_rate(PRCM_PLLSOC0_FREQ, rate, clk_mgt[clock].branch);
+ else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC1)
+ rate = pll_rate(PRCM_PLLSOC1_FREQ, rate, clk_mgt[clock].branch);
+ else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_DDR)
+ rate = pll_rate(PRCM_PLLDDR_FREQ, rate, clk_mgt[clock].branch);
+ else
+ return 0;
+
+ if ((clock == PRCMU_SGACLK) &&
+ (val & PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN)) {
+ u64 r = (rate * 10);
+
+ (void)do_div(r, 25);
+ return (unsigned long)r;
+ }
+ val &= PRCM_CLK_MGT_CLKPLLDIV_MASK;
+ if (val)
+ return rate / val;
+ else
+ return 0;
+}
+
+static unsigned long dsiclk_rate(u8 n)
+{
+ u32 divsel;
+ u32 div = 1;
+
+ divsel = readl(PRCM_DSI_PLLOUT_SEL);
+ divsel = ((divsel & dsiclk[n].divsel_mask) >> dsiclk[n].divsel_shift);
+
+ if (divsel == PRCM_DSI_PLLOUT_SEL_OFF)
+ divsel = dsiclk[n].divsel;
+
+ switch (divsel) {
+ case PRCM_DSI_PLLOUT_SEL_PHI_4:
+ div *= 2;
+ case PRCM_DSI_PLLOUT_SEL_PHI_2:
+ div *= 2;
+ case PRCM_DSI_PLLOUT_SEL_PHI:
+ return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
+ PLL_RAW) / div;
default:
- break;
+ return 0;
+ }
+}
+
+static unsigned long dsiescclk_rate(u8 n)
+{
+ u32 div;
+
+ div = readl(PRCM_DSITVCLK_DIV);
+ div = ((div & dsiescclk[n].div_mask) >> (dsiescclk[n].div_shift));
+ return clock_rate(PRCMU_TVCLK) / max((u32)1, div);
+}
+
+unsigned long prcmu_clock_rate(u8 clock)
+{
+ if (clock < PRCMU_NUM_REG_CLOCKS)
+ return clock_rate(clock);
+ else if (clock == PRCMU_TIMCLK)
+ return ROOT_CLOCK_RATE / 16;
+ else if (clock == PRCMU_SYSCLK)
+ return ROOT_CLOCK_RATE;
+ else if (clock == PRCMU_PLLSOC0)
+ return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+ else if (clock == PRCMU_PLLSOC1)
+ return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+ else if (clock == PRCMU_PLLDDR)
+ return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+ else if (clock == PRCMU_PLLDSI)
+ return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
+ PLL_RAW);
+ else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+ return dsiclk_rate(clock - PRCMU_DSI0CLK);
+ else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+ return dsiescclk_rate(clock - PRCMU_DSI0ESCCLK);
+ else
+ return 0;
+}
+
+static unsigned long clock_source_rate(u32 clk_mgt_val, int branch)
+{
+ if (clk_mgt_val & PRCM_CLK_MGT_CLK38)
+ return ROOT_CLOCK_RATE;
+ clk_mgt_val &= PRCM_CLK_MGT_CLKPLLSW_MASK;
+ if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC0)
+ return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, branch);
+ else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC1)
+ return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, branch);
+ else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_DDR)
+ return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, branch);
+ else
+ return 0;
+}
+
+static u32 clock_divider(unsigned long src_rate, unsigned long rate)
+{
+ u32 div;
+
+ div = (src_rate / rate);
+ if (div == 0)
+ return 1;
+ if (rate < (src_rate / div))
+ div++;
+ return div;
+}
+
+static long round_clock_rate(u8 clock, unsigned long rate)
+{
+ u32 val;
+ u32 div;
+ unsigned long src_rate;
+ long rounded_rate;
+
+ val = readl(clk_mgt[clock].reg);
+ src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
+ clk_mgt[clock].branch);
+ div = clock_divider(src_rate, rate);
+ if (val & PRCM_CLK_MGT_CLK38) {
+ if (clk_mgt[clock].clk38div) {
+ if (div > 2)
+ div = 2;
+ } else {
+ div = 1;
+ }
+ } else if ((clock == PRCMU_SGACLK) && (div == 3)) {
+ u64 r = (src_rate * 10);
+
+ (void)do_div(r, 25);
+ if (r <= rate)
+ return (unsigned long)r;
+ }
+ rounded_rate = (src_rate / min(div, (u32)31));
+
+ return rounded_rate;
+}
+
+#define MIN_PLL_VCO_RATE 600000000ULL
+#define MAX_PLL_VCO_RATE 1680640000ULL
+
+static long round_plldsi_rate(unsigned long rate)
+{
+ long rounded_rate = 0;
+ unsigned long src_rate;
+ unsigned long rem;
+ u32 r;
+
+ src_rate = clock_rate(PRCMU_HDMICLK);
+ rem = rate;
+
+ for (r = 7; (rem > 0) && (r > 0); r--) {
+ u64 d;
+
+ d = (r * rate);
+ (void)do_div(d, src_rate);
+ if (d < 6)
+ d = 6;
+ else if (d > 255)
+ d = 255;
+ d *= src_rate;
+ if (((2 * d) < (r * MIN_PLL_VCO_RATE)) ||
+ ((r * MAX_PLL_VCO_RATE) < (2 * d)))
+ continue;
+ (void)do_div(d, r);
+ if (rate < d) {
+ if (rounded_rate == 0)
+ rounded_rate = (long)d;
+ break;
+ }
+ if ((rate - d) < rem) {
+ rem = (rate - d);
+ rounded_rate = (long)d;
+ }
+ }
+ return rounded_rate;
+}
+
+static long round_dsiclk_rate(unsigned long rate)
+{
+ u32 div;
+ unsigned long src_rate;
+ long rounded_rate;
+
+ src_rate = pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
+ PLL_RAW);
+ div = clock_divider(src_rate, rate);
+ rounded_rate = (src_rate / ((div > 2) ? 4 : div));
+
+ return rounded_rate;
+}
+
+static long round_dsiescclk_rate(unsigned long rate)
+{
+ u32 div;
+ unsigned long src_rate;
+ long rounded_rate;
+
+ src_rate = clock_rate(PRCMU_TVCLK);
+ div = clock_divider(src_rate, rate);
+ rounded_rate = (src_rate / min(div, (u32)255));
+
+ return rounded_rate;
+}
+
+long prcmu_round_clock_rate(u8 clock, unsigned long rate)
+{
+ if (clock < PRCMU_NUM_REG_CLOCKS)
+ return round_clock_rate(clock, rate);
+ else if (clock == PRCMU_PLLDSI)
+ return round_plldsi_rate(rate);
+ else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+ return round_dsiclk_rate(rate);
+ else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+ return round_dsiescclk_rate(rate);
+ else
+ return (long)prcmu_clock_rate(clock);
+}
+
+static void set_clock_rate(u8 clock, unsigned long rate)
+{
+ u32 val;
+ u32 div;
+ unsigned long src_rate;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clk_mgt_lock, flags);
+
+ /* Grab the HW semaphore. */
+ while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+ cpu_relax();
+
+ val = readl(clk_mgt[clock].reg);
+ src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
+ clk_mgt[clock].branch);
+ div = clock_divider(src_rate, rate);
+ if (val & PRCM_CLK_MGT_CLK38) {
+ if (clk_mgt[clock].clk38div) {
+ if (div > 1)
+ val |= PRCM_CLK_MGT_CLK38DIV;
+ else
+ val &= ~PRCM_CLK_MGT_CLK38DIV;
+ }
+ } else if (clock == PRCMU_SGACLK) {
+ val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK |
+ PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN);
+ if (div == 3) {
+ u64 r = (src_rate * 10);
+
+ (void)do_div(r, 25);
+ if (r <= rate) {
+ val |= PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN;
+ div = 0;
+ }
+ }
+ val |= min(div, (u32)31);
+ } else {
+ val &= ~PRCM_CLK_MGT_CLKPLLDIV_MASK;
+ val |= min(div, (u32)31);
+ }
+ writel(val, clk_mgt[clock].reg);
+
+ /* Release the HW semaphore. */
+ writel(0, PRCM_SEM);
+
+ spin_unlock_irqrestore(&clk_mgt_lock, flags);
+}
+
+static int set_plldsi_rate(unsigned long rate)
+{
+ unsigned long src_rate;
+ unsigned long rem;
+ u32 pll_freq = 0;
+ u32 r;
+
+ src_rate = clock_rate(PRCMU_HDMICLK);
+ rem = rate;
+
+ for (r = 7; (rem > 0) && (r > 0); r--) {
+ u64 d;
+ u64 hwrate;
+
+ d = (r * rate);
+ (void)do_div(d, src_rate);
+ if (d < 6)
+ d = 6;
+ else if (d > 255)
+ d = 255;
+ hwrate = (d * src_rate);
+ if (((2 * hwrate) < (r * MIN_PLL_VCO_RATE)) ||
+ ((r * MAX_PLL_VCO_RATE) < (2 * hwrate)))
+ continue;
+ (void)do_div(hwrate, r);
+ if (rate < hwrate) {
+ if (pll_freq == 0)
+ pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) |
+ (r << PRCM_PLL_FREQ_R_SHIFT));
+ break;
+ }
+ if ((rate - hwrate) < rem) {
+ rem = (rate - hwrate);
+ pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) |
+ (r << PRCM_PLL_FREQ_R_SHIFT));
+ }
}
+ if (pll_freq == 0)
+ return -EINVAL;
+
+ pll_freq |= (1 << PRCM_PLL_FREQ_N_SHIFT);
+ writel(pll_freq, PRCM_PLLDSI_FREQ);
+
+ return 0;
+}
+
+static void set_dsiclk_rate(u8 n, unsigned long rate)
+{
+ u32 val;
+ u32 div;
+
+ div = clock_divider(pll_rate(PRCM_PLLDSI_FREQ,
+ clock_rate(PRCMU_HDMICLK), PLL_RAW), rate);
+
+ dsiclk[n].divsel = (div == 1) ? PRCM_DSI_PLLOUT_SEL_PHI :
+ (div == 2) ? PRCM_DSI_PLLOUT_SEL_PHI_2 :
+ /* else */ PRCM_DSI_PLLOUT_SEL_PHI_4;
+
+ val = readl(PRCM_DSI_PLLOUT_SEL);
+ val &= ~dsiclk[n].divsel_mask;
+ val |= (dsiclk[n].divsel << dsiclk[n].divsel_shift);
+ writel(val, PRCM_DSI_PLLOUT_SEL);
+}
+
+static void set_dsiescclk_rate(u8 n, unsigned long rate)
+{
+ u32 val;
+ u32 div;
+
+ div = clock_divider(clock_rate(PRCMU_TVCLK), rate);
+ val = readl(PRCM_DSITVCLK_DIV);
+ val &= ~dsiescclk[n].div_mask;
+ val |= (min(div, (u32)255) << dsiescclk[n].div_shift);
+ writel(val, PRCM_DSITVCLK_DIV);
+}
+
+int prcmu_set_clock_rate(u8 clock, unsigned long rate)
+{
if (clock < PRCMU_NUM_REG_CLOCKS)
- return request_reg_clock(clock, enable);
- return -EINVAL;
+ set_clock_rate(clock, rate);
+ else if (clock == PRCMU_PLLDSI)
+ return set_plldsi_rate(rate);
+ else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+ set_dsiclk_rate((clock - PRCMU_DSI0CLK), rate);
+ else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+ set_dsiescclk_rate((clock - PRCMU_DSI0ESCCLK), rate);
+ return 0;
}
int db8500_prcmu_config_esram0_deep_sleep(u8 state)
@@ -1476,7 +2021,7 @@ int db8500_prcmu_config_esram0_deep_sleep(u8 state)
return 0;
}
-int prcmu_config_hotdog(u8 threshold)
+int db8500_prcmu_config_hotdog(u8 threshold)
{
mutex_lock(&mb4_transfer.lock);
@@ -1494,7 +2039,7 @@ int prcmu_config_hotdog(u8 threshold)
return 0;
}
-int prcmu_config_hotmon(u8 low, u8 high)
+int db8500_prcmu_config_hotmon(u8 low, u8 high)
{
mutex_lock(&mb4_transfer.lock);
@@ -1533,7 +2078,7 @@ static int config_hot_period(u16 val)
return 0;
}
-int prcmu_start_temp_sense(u16 cycles32k)
+int db8500_prcmu_start_temp_sense(u16 cycles32k)
{
if (cycles32k == 0xFFFF)
return -EINVAL;
@@ -1541,7 +2086,7 @@ int prcmu_start_temp_sense(u16 cycles32k)
return config_hot_period(cycles32k);
}
-int prcmu_stop_temp_sense(void)
+int db8500_prcmu_stop_temp_sense(void)
{
return config_hot_period(0xFFFF);
}
@@ -1570,7 +2115,7 @@ static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
}
-int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
{
BUG_ON(num == 0 || num > 0xf);
return prcmu_a9wdog(MB4H_A9WDOG_CONF, num, 0, 0,
@@ -1578,17 +2123,17 @@ int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
A9WDOG_AUTO_OFF_DIS);
}
-int prcmu_enable_a9wdog(u8 id)
+int db8500_prcmu_enable_a9wdog(u8 id)
{
return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0);
}
-int prcmu_disable_a9wdog(u8 id)
+int db8500_prcmu_disable_a9wdog(u8 id)
{
return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0);
}
-int prcmu_kick_a9wdog(u8 id)
+int db8500_prcmu_kick_a9wdog(u8 id)
{
return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0);
}
@@ -1596,16 +2141,8 @@ int prcmu_kick_a9wdog(u8 id)
/*
* timeout is 28 bit, in ms.
*/
-#define MAX_WATCHDOG_TIMEOUT 131000
-int prcmu_load_a9wdog(u8 id, u32 timeout)
+int db8500_prcmu_load_a9wdog(u8 id, u32 timeout)
{
- if (timeout > MAX_WATCHDOG_TIMEOUT)
- /*
- * Due to calculation bug in prcmu fw, timeouts
- * can't be bigger than 131 seconds.
- */
- return -EINVAL;
-
return prcmu_a9wdog(MB4H_A9WDOG_LOAD,
(id & A9WDOG_ID_MASK) |
/*
@@ -1619,41 +2156,6 @@ int prcmu_load_a9wdog(u8 id, u32 timeout)
}
/**
- * prcmu_set_clock_divider() - Configure the clock divider.
- * @clock: The clock for which the request is made.
- * @divider: The clock divider. (< 32)
- *
- * This function should only be used by the clock implementation.
- * Do not use it from any other place!
- */
-int prcmu_set_clock_divider(u8 clock, u8 divider)
-{
- u32 val;
- unsigned long flags;
-
- if ((clock >= PRCMU_NUM_REG_CLOCKS) || (divider < 1) || (31 < divider))
- return -EINVAL;
-
- spin_lock_irqsave(&clk_mgt_lock, flags);
-
- /* Grab the HW semaphore. */
- while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
- cpu_relax();
-
- val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
- val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK);
- val |= (u32)divider;
- writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
-
- /* Release the HW semaphore. */
- writel(0, PRCM_SEM);
-
- spin_unlock_irqrestore(&clk_mgt_lock, flags);
-
- return 0;
-}
-
-/**
* prcmu_abb_read() - Read register value(s) from the ABB.
* @slave: The I2C slave address.
* @reg: The (start) register address.
@@ -1675,6 +2177,7 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
cpu_relax();
+ writeb(0, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5));
writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
@@ -1700,16 +2203,19 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
}
/**
- * prcmu_abb_write() - Write register value(s) to the ABB.
+ * prcmu_abb_write_masked() - Write masked register value(s) to the ABB.
* @slave: The I2C slave address.
* @reg: The (start) register address.
* @value: The value(s) to write.
+ * @mask: The mask(s) to use.
* @size: The number of registers to write.
*
- * Reads register value(s) from the ABB.
+ * Writes masked register value(s) to the ABB.
+ * For each @value, only the bits set to 1 in the corresponding @mask
+ * will be written. The other bits are not changed.
* @size has to be 1 for the current firmware version.
*/
-int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size)
{
int r;
@@ -1721,6 +2227,7 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
cpu_relax();
+ writeb(~*mask, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5));
writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
@@ -1743,6 +2250,23 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
}
/**
+ * prcmu_abb_write() - Write register value(s) to the ABB.
+ * @slave: The I2C slave address.
+ * @reg: The (start) register address.
+ * @value: The value(s) to write.
+ * @size: The number of registers to write.
+ *
+ * Writes register value(s) to the ABB.
+ * @size has to be 1 for the current firmware version.
+ */
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+ u8 mask = ~0;
+
+ return prcmu_abb_write_masked(slave, reg, value, &mask, size);
+}
+
+/**
* prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem
*/
void prcmu_ac_wake_req(void)
@@ -1850,9 +2374,9 @@ u16 db8500_prcmu_get_reset_code(void)
}
/**
- * prcmu_reset_modem - ask the PRCMU to reset modem
+ * db8500_prcmu_reset_modem - ask the PRCMU to reset modem
*/
-void prcmu_modem_reset(void)
+void db8500_prcmu_modem_reset(void)
{
mutex_lock(&mb1_transfer.lock);
@@ -2099,6 +2623,26 @@ static struct irq_chip prcmu_irq_chip = {
.irq_unmask = prcmu_irq_unmask,
};
+static char *fw_project_name(u8 project)
+{
+ switch (project) {
+ case PRCMU_FW_PROJECT_U8500:
+ return "U8500";
+ case PRCMU_FW_PROJECT_U8500_C2:
+ return "U8500 C2";
+ case PRCMU_FW_PROJECT_U9500:
+ return "U9500";
+ case PRCMU_FW_PROJECT_U9500_C2:
+ return "U9500 C2";
+ case PRCMU_FW_PROJECT_U8520:
+ return "U8520";
+ case PRCMU_FW_PROJECT_U8420:
+ return "U8420";
+ default:
+ return "Unknown";
+ }
+}
+
void __init db8500_prcmu_early_init(void)
{
unsigned int i;
@@ -2108,11 +2652,13 @@ void __init db8500_prcmu_early_init(void)
if (tcpm_base != NULL) {
u32 version;
version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET);
- prcmu_version.project_number = version & 0xFF;
- prcmu_version.api_version = (version >> 8) & 0xFF;
- prcmu_version.func_version = (version >> 16) & 0xFF;
- prcmu_version.errata = (version >> 24) & 0xFF;
- pr_info("PRCMU firmware version %d.%d.%d\n",
+ fw_info.version.project = version & 0xFF;
+ fw_info.version.api_version = (version >> 8) & 0xFF;
+ fw_info.version.func_version = (version >> 16) & 0xFF;
+ fw_info.version.errata = (version >> 24) & 0xFF;
+ fw_info.valid = true;
+ pr_info("PRCMU firmware: %s, version %d.%d.%d\n",
+ fw_project_name(fw_info.version.project),
(version >> 8) & 0xFF, (version >> 16) & 0xFF,
(version >> 24) & 0xFF);
iounmap(tcpm_base);
@@ -2130,6 +2676,7 @@ void __init db8500_prcmu_early_init(void)
init_completion(&mb0_transfer.ac_wake_work);
mutex_init(&mb1_transfer.lock);
init_completion(&mb1_transfer.work);
+ mb1_transfer.ape_opp = APE_NO_CHANGE;
mutex_init(&mb2_transfer.lock);
init_completion(&mb2_transfer.work);
spin_lock_init(&mb2_transfer.auto_pm_lock);
@@ -2154,7 +2701,7 @@ void __init db8500_prcmu_early_init(void)
}
}
-static void __init db8500_prcmu_init_clkforce(void)
+static void __init init_prcm_registers(void)
{
u32 val;
@@ -2186,19 +2733,17 @@ static struct regulator_consumer_supply db8500_vape_consumers[] = {
REGULATOR_SUPPLY("vcore", "uart1"),
REGULATOR_SUPPLY("vcore", "uart2"),
REGULATOR_SUPPLY("v-ape", "nmk-ske-keypad.0"),
+ REGULATOR_SUPPLY("v-hsi", "ste_hsi.0"),
};
static struct regulator_consumer_supply db8500_vsmps2_consumers[] = {
- /* CG2900 and CW1200 power to off-chip peripherals */
- REGULATOR_SUPPLY("gbf_1v8", "cg2900-uart.0"),
- REGULATOR_SUPPLY("wlan_1v8", "cw1200.0"),
REGULATOR_SUPPLY("musb_1v8", "ab8500-usb.0"),
/* AV8100 regulator */
REGULATOR_SUPPLY("hdmi_1v8", "0-0070"),
};
static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = {
- REGULATOR_SUPPLY("vsupply", "b2r2.0"),
+ REGULATOR_SUPPLY("vsupply", "b2r2_bus"),
REGULATOR_SUPPLY("vsupply", "mcde"),
};
@@ -2235,6 +2780,7 @@ static struct regulator_consumer_supply db8500_esram12_consumers[] = {
static struct regulator_consumer_supply db8500_esram34_consumers[] = {
REGULATOR_SUPPLY("v-esram34", "mcde"),
REGULATOR_SUPPLY("esram34", "cm_control"),
+ REGULATOR_SUPPLY("lcla_esram", "dma40.0"),
};
static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
@@ -2291,7 +2837,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
},
},
[DB8500_REGULATOR_SWITCH_SVAMMDSP] = {
- .supply_regulator = "db8500-vape",
+ /* dependency to u8500-vape is handled outside regulator framework */
.constraints = {
.name = "db8500-sva-mmdsp",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -2307,7 +2853,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
},
},
[DB8500_REGULATOR_SWITCH_SVAPIPE] = {
- .supply_regulator = "db8500-vape",
+ /* dependency to u8500-vape is handled outside regulator framework */
.constraints = {
.name = "db8500-sva-pipe",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -2316,7 +2862,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
.num_consumer_supplies = ARRAY_SIZE(db8500_svapipe_consumers),
},
[DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
- .supply_regulator = "db8500-vape",
+ /* dependency to u8500-vape is handled outside regulator framework */
.constraints = {
.name = "db8500-sia-mmdsp",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -2331,7 +2877,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
},
},
[DB8500_REGULATOR_SWITCH_SIAPIPE] = {
- .supply_regulator = "db8500-vape",
+ /* dependency to u8500-vape is handled outside regulator framework */
.constraints = {
.name = "db8500-sia-pipe",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -2359,7 +2905,10 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
.num_consumer_supplies = ARRAY_SIZE(db8500_b2r2_mcde_consumers),
},
[DB8500_REGULATOR_SWITCH_ESRAM12] = {
- .supply_regulator = "db8500-vape",
+ /*
+ * esram12 is set in retention and supplied by Vsafe when Vape is off,
+ * no need to hold Vape
+ */
.constraints = {
.name = "db8500-esram12",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -2374,7 +2923,10 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
},
},
[DB8500_REGULATOR_SWITCH_ESRAM34] = {
- .supply_regulator = "db8500-vape",
+ /*
+ * esram34 is set in retention and supplied by Vsafe when Vape is off,
+ * no need to hold Vape
+ */
.constraints = {
.name = "db8500-esram34",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -2412,7 +2964,7 @@ static int __init db8500_prcmu_probe(struct platform_device *pdev)
if (ux500_is_svp())
return -ENODEV;
- db8500_prcmu_init_clkforce();
+ init_prcm_registers();
/* Clean up the mailbox interrupts after pre-kernel code. */
writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);