aboutsummaryrefslogtreecommitdiff
path: root/drivers/mfd/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/Kconfig')
-rw-r--r--drivers/mfd/Kconfig76
1 files changed, 67 insertions, 9 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f4b4dad7739..e129c820df7 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -106,6 +106,19 @@ config UCB1400_CORE
To compile this driver as a module, choose M here: the
module will be called ucb1400_core.
+config MFD_LM3533
+ tristate "LM3533 Lighting Power chip"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Say yes here to enable support for National Semiconductor / TI
+ LM3533 Lighting Power chips.
+
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the LED,
+ backlight or ambient-light-sensor functionality of the device.
+
config TPS6105X
tristate "TPS61050/61052 Boost Converters"
depends on I2C
@@ -177,8 +190,8 @@ config MFD_TPS65910
bool "TPS65910 Power Management chip"
depends on I2C=y && GPIOLIB
select MFD_CORE
- select GPIO_TPS65910
select REGMAP_I2C
+ select IRQ_DOMAIN
help
if you say yes here you get support for the TPS65910 series of
Power Management chips.
@@ -409,6 +422,19 @@ config PMIC_ADP5520
individual components like LCD backlight, LEDs, GPIOs and Kepad
under the corresponding menus.
+config MFD_MAX77693
+ bool "Maxim Semiconductor MAX77693 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Say yes here to support for Maxim Semiconductor MAX77693.
+ This is a companion Power Management IC with Flash, Haptic, Charger,
+ and MUIC(Micro USB Interface Controller) controls on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_MAX8925
bool "Maxim Semiconductor MAX8925 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS
@@ -454,9 +480,9 @@ config MFD_S5M_CORE
of the device
config MFD_WM8400
- tristate "Support Wolfson Microelectronics WM8400"
+ bool "Support Wolfson Microelectronics WM8400"
select MFD_CORE
- depends on I2C
+ depends on I2C=y
select REGMAP_I2C
help
Support for the Wolfson Microelecronics WM8400 PMIC and audio
@@ -473,6 +499,7 @@ config MFD_WM831X_I2C
select MFD_CORE
select MFD_WM831X
select REGMAP_I2C
+ select IRQ_DOMAIN
depends on I2C=y && GENERIC_HARDIRQS
help
Support for the Wolfson Microelecronics WM831x and WM832x PMICs
@@ -485,6 +512,7 @@ config MFD_WM831X_SPI
select MFD_CORE
select MFD_WM831X
select REGMAP_SPI
+ select IRQ_DOMAIN
depends on SPI_MASTER && GENERIC_HARDIRQS
help
Support for the Wolfson Microelecronics WM831x and WM832x PMICs
@@ -597,17 +625,32 @@ config MFD_MC13783
tristate
config MFD_MC13XXX
- tristate "Support Freescale MC13783 and MC13892"
- depends on SPI_MASTER
+ tristate
+ depends on SPI_MASTER || I2C
select MFD_CORE
select MFD_MC13783
help
- Support for the Freescale (Atlas) PMIC and audio CODECs
- MC13783 and MC13892.
- This driver provides common support for accessing the device,
+ Enable support for the Freescale MC13783 and MC13892 PMICs.
+ This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
+config MFD_MC13XXX_SPI
+ tristate "Freescale MC13783 and MC13892 SPI interface"
+ depends on SPI_MASTER
+ select REGMAP_SPI
+ select MFD_MC13XXX
+ help
+ Select this if your MC13xxx is connected via an SPI bus.
+
+config MFD_MC13XXX_I2C
+ tristate "Freescale MC13892 I2C interface"
+ depends on I2C
+ select REGMAP_I2C
+ select MFD_MC13XXX
+ help
+ Select this if your MC13xxx is connected via an I2C bus.
+
config ABX500_CORE
bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
default y if ARCH_U300 || ARCH_U8500
@@ -651,7 +694,7 @@ config EZX_PCAP
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
- depends on GENERIC_HARDIRQS && ABX500_CORE
+ depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
select MFD_CORE
help
Select this option to enable access to AB8500 power management
@@ -722,6 +765,16 @@ config LPC_SCH
LPC bridge function of the Intel SCH provides support for
System Management Bus and General Purpose I/O.
+config LPC_ICH
+ tristate "Intel ICH LPC"
+ depends on PCI
+ select MFD_CORE
+ help
+ The LPC bridge function of the Intel ICH provides support for
+ many functional units. This driver provides needed support for
+ other drivers to control these functions, currently GPIO and
+ watchdog.
+
config MFD_RDC321X
tristate "Support for RDC-R321x southbridge"
select MFD_CORE
@@ -854,6 +907,11 @@ config MFD_RC5T583
Additional drivers must be enabled in order to use the
different functionality of the device.
+config MFD_STA2X11
+ bool "STA2X11 multi function device support"
+ depends on STA2X11
+ select MFD_CORE
+
config MFD_ANATOP
bool "Support for Freescale i.MX on-chip ANATOP controller"
depends on SOC_IMX6Q