diff options
| -rw-r--r-- | drivers/bcma/driver_pci.c | 124 | ||||
| -rw-r--r-- | include/linux/bcma/bcma_driver_pci.h | 85 |
2 files changed, 155 insertions, 54 deletions
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c index 4fde6254f04..fc462b4a099 100644 --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c @@ -4,6 +4,7 @@ * * Copyright 2005, Broadcom Corporation * Copyright 2006, 2007, Michael Buesch <m@bues.ch> + * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> * * Licensed under the GNU/GPL. See COPYING for details. */ @@ -18,38 +19,39 @@ static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) { - pcicore_write32(pc, 0x130, address); - pcicore_read32(pc, 0x130); - return pcicore_read32(pc, 0x134); + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); + pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); + return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); } #if 0 static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) { - pcicore_write32(pc, 0x130, address); - pcicore_read32(pc, 0x130); - pcicore_write32(pc, 0x134, data); + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); + pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); } #endif static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) { - const u16 mdio_control = 0x128; - const u16 mdio_data = 0x12C; u32 v; int i; - v = (1 << 30); /* Start of Transaction */ - v |= (1 << 28); /* Write Transaction */ - v |= (1 << 17); /* Turnaround */ - v |= (0x1F << 18); + v = BCMA_CORE_PCI_MDIODATA_START; + v |= BCMA_CORE_PCI_MDIODATA_WRITE; + v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << + BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); + v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << + BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); + v |= BCMA_CORE_PCI_MDIODATA_TA; v |= (phy << 4); - pcicore_write32(pc, mdio_data, v); + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); udelay(10); for (i = 0; i < 200; i++) { - v = pcicore_read32(pc, mdio_control); - if (v & 0x100 /* Trans complete */) + v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); + if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) break; msleep(1); } @@ -57,79 +59,84 @@ static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) { - const u16 mdio_control = 0x128; - const u16 mdio_data = 0x12C; int max_retries = 10; u16 ret = 0; u32 v; int i; - v = 0x80; /* Enable Preamble Sequence */ - v |= 0x2; /* MDIO Clock Divisor */ - pcicore_write32(pc, mdio_control, v); + /* enable mdio access to SERDES */ + v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; + v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); if (pc->core->id.rev >= 10) { max_retries = 200; bcma_pcie_mdio_set_phy(pc, device); + v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << + BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); + v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); + } else { + v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); + v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); } - v = (1 << 30); /* Start of Transaction */ - v |= (1 << 29); /* Read Transaction */ - v |= (1 << 17); /* Turnaround */ - if (pc->core->id.rev < 10) - v |= (u32)device << 22; - v |= (u32)address << 18; - pcicore_write32(pc, mdio_data, v); + v = BCMA_CORE_PCI_MDIODATA_START; + v |= BCMA_CORE_PCI_MDIODATA_READ; + v |= BCMA_CORE_PCI_MDIODATA_TA; + + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); /* Wait for the device to complete the transaction */ udelay(10); for (i = 0; i < max_retries; i++) { - v = pcicore_read32(pc, mdio_control); - if (v & 0x100 /* Trans complete */) { + v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); + if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { udelay(10); - ret = pcicore_read32(pc, mdio_data); + ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); break; } msleep(1); } - pcicore_write32(pc, mdio_control, 0); + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); return ret; } static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, u8 address, u16 data) { - const u16 mdio_control = 0x128; - const u16 mdio_data = 0x12C; int max_retries = 10; u32 v; int i; - v = 0x80; /* Enable Preamble Sequence */ - v |= 0x2; /* MDIO Clock Divisor */ - pcicore_write32(pc, mdio_control, v); + /* enable mdio access to SERDES */ + v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; + v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); if (pc->core->id.rev >= 10) { max_retries = 200; bcma_pcie_mdio_set_phy(pc, device); + v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << + BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); + v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); + } else { + v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); + v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); } - v = (1 << 30); /* Start of Transaction */ - v |= (1 << 28); /* Write Transaction */ - v |= (1 << 17); /* Turnaround */ - if (pc->core->id.rev < 10) - v |= (u32)device << 22; - v |= (u32)address << 18; + v = BCMA_CORE_PCI_MDIODATA_START; + v |= BCMA_CORE_PCI_MDIODATA_WRITE; + v |= BCMA_CORE_PCI_MDIODATA_TA; v |= data; - pcicore_write32(pc, mdio_data, v); + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); /* Wait for the device to complete the transaction */ udelay(10); for (i = 0; i < max_retries; i++) { - v = pcicore_read32(pc, mdio_control); - if (v & 0x100 /* Trans complete */) + v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); + if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) break; msleep(1); } - pcicore_write32(pc, mdio_control, 0); + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); } /************************************************** @@ -138,20 +145,29 @@ static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) { - return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; + u32 tmp; + + tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); + if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) + return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | + BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; + else + return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; } static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) { - const u8 serdes_pll_device = 0x1D; - const u8 serdes_rx_device = 0x1F; u16 tmp; - bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, - bcma_pcicore_polarity_workaround(pc)); - tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); - if (tmp & 0x4000) - bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); + bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, + BCMA_CORE_PCI_SERDES_RX_CTRL, + bcma_pcicore_polarity_workaround(pc)); + tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, + BCMA_CORE_PCI_SERDES_PLL_CTRL); + if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) + bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, + BCMA_CORE_PCI_SERDES_PLL_CTRL, + tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); } /************************************************** diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h index 3871b668caf..67ea7beff9f 100644 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -53,6 +53,35 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 +#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ +#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ +#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ +#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ +#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 +#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ +#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ +#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ +#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ +#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ +#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ +#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ +#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ +#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ +#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ +#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ +#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ +#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ +#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ +#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ +#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ @@ -72,6 +101,62 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ +/* PCIE protocol PHY diagnostic registers */ +#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ +#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ +#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ +#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ +#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ +#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ +#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ +#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ +#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ +#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ +#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ +#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ +#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ +#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ +#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ +#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ +#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ + +/* PCIE protocol DLLP diagnostic registers */ +#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ +#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ +#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ +#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) +#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ +#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ +#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ +#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ +#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ +#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ +#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ +#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ +#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ +#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ +#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ +#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ +#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ +#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ + +/* SERDES RX registers */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ +#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ +#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ +#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ + +/* SERDES PLL registers */ +#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ +#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ + /* PCIcore specific boardflags */ #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ |