aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/cris/Kconfig4
-rw-r--r--arch/cris/arch-v10/Kconfig12
-rw-r--r--drivers/net/irda/Kconfig2
3 files changed, 9 insertions, 9 deletions
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 17addacb169..408b055c585 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -282,8 +282,8 @@ config ETRAX_RTC
Enables drivers for the Real-Time Clock battery-backed chips on
some products. The kernel reads the time when booting, and
the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
- rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc
- device. You can check the time with cat /proc/rtc, but
+ rtc_time struct (see <file:arch/cris/include/asm/rtc.h>) on the
+ /dev/rtc device. You can check the time with cat /proc/rtc, but
normal time reading should be done using libc function time and
friends.
diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
index adc164e9933..df9a38b4f18 100644
--- a/arch/cris/arch-v10/Kconfig
+++ b/arch/cris/arch-v10/Kconfig
@@ -24,8 +24,8 @@ config ETRAX_PA_LEDS
help
The ETRAX network driver is responsible for flashing LED's when
packets arrive and are sent. It uses macros defined in
- <file:include/asm-cris/io.h>, and those macros are defined after what
- YOU choose in this option. The actual bits used are configured
+ <file:arch/cris/include/asm/io.h>, and those macros are defined after
+ what YOU choose in this option. The actual bits used are configured
separately. Select this if the LEDs are on port PA. Some products
put the leds on PB or a memory-mapped latch (CSP0) instead.
@@ -34,8 +34,8 @@ config ETRAX_PB_LEDS
help
The ETRAX network driver is responsible for flashing LED's when
packets arrive and are sent. It uses macros defined in
- <file:include/asm-cris/io.h>, and those macros are defined after what
- YOU choose in this option. The actual bits used are configured
+ <file:arch/cris/include/asm/io.h>, and those macros are defined after
+ what YOU choose in this option. The actual bits used are configured
separately. Select this if the LEDs are on port PB. Some products
put the leds on PA or a memory-mapped latch (CSP0) instead.
@@ -44,8 +44,8 @@ config ETRAX_CSP0_LEDS
help
The ETRAX network driver is responsible for flashing LED's when
packets arrive and are sent. It uses macros defined in
- <file:include/asm-cris/io.h>, and those macros are defined after what
- YOU choose in this option. The actual bits used are configured
+ <file:arch/cris/include/asm/io.h>, and those macros are defined after
+ what YOU choose in this option. The actual bits used are configured
separately. Select this if the LEDs are on a memory-mapped latch
using chip select CSP0, this is mapped at 0x90000000.
Some products put the leds on PA or PB instead.
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 25bb2a015e1..a40fab44b9a 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -183,7 +183,7 @@ config OLD_BELKIN_DONGLE
Say Y here if you want to build support for the Adaptec Airport 1000
and 2000 dongles. If you want to compile it as a module, choose
M here. Some information is contained in the comments
- at the top of <file:drivers/net/irda/old_belkin.c>.
+ at the top of <file:drivers/net/irda/old_belkin-sir.c>.
config ACT200L_DONGLE
tristate "ACTiSYS IR-200L dongle"