| Age | Commit message (Collapse) | Author |
|---|
|
This change adds a new seccomp mode which specifies the allowed system
calls dynamically. When in the new mode (13), all system calls are
checked against process-defined filters - first by system call number,
then by a filter string. If an entry exists for a given system call and
all filter predicates evaluate to true, then the task may proceed.
Otherwise, the task is killed.
Filter string parsing and evaluation is handled by the ftrace filter
engine. Related patches tweak to the perf filter trace and free
allowing the calls to be shared. Filters inherit their understanding of
types and arguments for each system call from the CONFIG_FTRACE_SYSCALLS
subsystem which already populates this information in syscall_metadata
associated enter_event (and exit_event) structures. If
CONFIG_FTRACE_SYSCALLS is not compiled in, only filter strings of "1"
will be allowed.
The net result is a process may have its system calls filtered using the
ftrace filter engine's inherent understanding of systems calls. The set
of filters is specified through the PR_SET_SECCOMP_FILTER argument in
prctl(). For example, a filterset for a process, like pdftotext, that
should only process read-only input could (roughly) look like:
sprintf(rdonly, "flags == %u", O_RDONLY|O_LARGEFILE);
type = PR_SECCOMP_FILTER_SYSCALL;
prctl(PR_SET_SECCOMP_FILTER, type, __NR_open, rdonly);
prctl(PR_SET_SECCOMP_FILTER, type, __NR__llseek, "1");
prctl(PR_SET_SECCOMP_FILTER, type, __NR_brk, "1");
prctl(PR_SET_SECCOMP_FILTER, type, __NR_close, "1");
prctl(PR_SET_SECCOMP_FILTER, type, __NR_exit_group, "1");
prctl(PR_SET_SECCOMP_FILTER, type, __NR_fstat64, "1");
prctl(PR_SET_SECCOMP_FILTER, type, __NR_mmap2, "1");
prctl(PR_SET_SECCOMP_FILTER, type, __NR_munmap, "1");
prctl(PR_SET_SECCOMP_FILTER, type, __NR_read, "1");
prctl(PR_SET_SECCOMP_FILTER, type, __NR_write, "fd == 1 || fd == 2");
prctl(PR_SET_SECCOMP, 13);
Subsequent calls to PR_SET_SECCOMP_FILTER for the same system call will
be &&'d together to ensure that attack surface may only be reduced:
prctl(PR_SET_SECCOMP_FILTER, __NR_write, "fd != 2");
With the earlier example, the active filter becomes:
"(fd == 1 || fd == 2) && (fd != 2)"
The patch also adds PR_CLEAR_SECCOMP_FILTER and PR_GET_SECCOMP_FILTER.
The latter returns the current filter for a system call to userspace:
prctl(PR_GET_SECCOMP_FILTER, type, __NR_write, buf, bufsize);
while the former clears any filters for a given system call changing it
back to a defaulty deny:
prctl(PR_CLEAR_SECCOMP_FILTER, type, __NR_write);
Note, type may be either PR_SECCOMP_FILTER_EVENT or
PR_SECCOMP_FILTER_SYSCALL. This allows for ftrace event ids to be used
in lieu of system call numbers. At present, only syscalls:sys_enter_*
event id are supported, but this allows for potential future extension
of the backend.
v11: - Use mode "13" to avoid future overlap; with comment update
- Use kref; extra memset; other clean up from msb@chromium.org
- Cleaned up Makefile object merging since locally shared symbols are gone
v10: - Note that PERF_EVENTS are also needed for ftrace filter engine support.
- Removed dependency on ftrace code changes for event_filters
(wrapping with perf_events and violating opaqueness for the filter str)
- pulled in all the hacks to get access to syscall_metadata and build
call objects for filter evaluation.
v9: - rebase on to de505e709ffb09a7382ca8e0d8c7dbb171ba5
- disallow PR_SECCOMP_FILTER_EVENT when a compat task is calling
as ftrace has no compat_syscalls awareness yet.
- return -ENOSYS when filter engine strings are used on a compat call
as there are no compat_syscalls events to reference yet.
v8: - expand parenthical use during SET_SECCOMP_FILTER to avoid operator
precedence undermining attack surface reduction (caught by
segoon@openwall.com). Opted to waste bytes on () than reparse to
avoid OP_OR precedence overriding extend_filter's intentions.
- remove more lingering references to @state
- fix incorrect compat mismatch check (anyone up for a Tested-By?)
v7: - disallow seccomp_filter inheritance across fork except when seccomp
is active. This avoids filters leaking across processes when they
are not actively in use but ensure an allowed fork/clone doesn't drop
filters.
- remove the Mode: print from show as it reflected current and not the
filters holder.
v6: - clean up minor unnecessary changes (empty lines, ordering, etc)
- fix one overly long line
- add refcount overflow BUG_ON
v5: - drop mutex usage when the task_struct is safe to access directly
v4: - move off of RCU to a read/write guarding mutex after
paulmck@linux.vnet.ibm.com's feedback (mem leak, rcu fail)
- stopped inc/dec refcounts in mutex guard sections
- added required changes to init the mutex in INIT_TASK and safely
lock around fork inheritance.
- added id_type support to the prctl interface to support using
ftrace event ids as an alternative to syscall numbers. Behavior
is identical otherwise (as per discussion with mingo@elte.hu)
v3: - always block execve calls (as per torvalds@linux-foundation.org)
- add __NR_seccomp_execve(_32) to seccomp-supporting arches
- ensure compat tasks can't reach ftrace:syscalls
- dropped new defines for seccomp modes.
- two level array instead of hlists (sugg. by olofj@chromium.org)
- added generic Kconfig entry that is not connected.
- dropped internal seccomp.h
- move prctl helpers to seccomp_filter
- killed seccomp_t typedef (as per checkpatch)
v2: - changed to use the existing syscall number ABI.
- prctl changes to minimize parsing in the kernel:
prctl(PR_SET_SECCOMP, {0 | 1 | 2 }, { 0 | ON_EXEC });
prctl(PR_SET_SECCOMP_FILTER, __NR_read, "fd == 5");
prctl(PR_CLEAR_SECCOMP_FILTER, __NR_read);
prctl(PR_GET_SECCOMP_FILTER, __NR_read, buf, bufsize);
- defined PR_SECCOMP_MODE_STRICT and ..._FILTER
- added flags
- provide a default fail syscall_nr_to_meta in ftrace
- provides fallback for unhooked system calls
- use -ENOSYS and ERR_PTR(-ENOSYS) for stubbed functionality
- added kernel/seccomp.h to share seccomp.c/seccomp_filter.c
- moved to a hlist and 4 bit hash of linked lists
- added support to operate without CONFIG_FTRACE_SYSCALLS
- moved Kconfig support next to SECCOMP
- made Kconfig entries dependent on EXPERIMENTAL
- added macros to avoid ifdefs from kernel/fork.c
- added compat task/filter matching
- drop seccomp.h inclusion in sched.h and drop seccomp_t
- added Filtering to "show" output
- added on_exec state dup'ing when enabling after a fast-path accept.
Signed-off-by: Will Drewry <wad@chromium.org>
BUG=chromium-os:14496
TEST=built in x86-alex. Out of tree commandline helper test confirms functionality works. Will check in a test into the minijail repo which can be used from autotest.
Change-Id: I901595e3399914783739d113a058d83550ddf8e2
Reviewed-on: http://gerrit.chromium.org/gerrit/4814
Reviewed-by: Sonny Rao <sonnyrao@chromium.org>
Tested-by: Will Drewry <wad@chromium.org>
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
|
|
Add a simple read-only counter to super_block that indicates deep this
is in the stack of filesystems. Previously ecryptfs was the only
stackable filesystem and it explicitly disallowed multiple layers of
itself.
Overlayfs, however, can be stacked recursively and also may be stacked
on top of ecryptfs or vice versa.
To limit the kernel stack usage we must limit the depth of the
filesystem stack. Initially the limit is set to 2.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
|
|
This reverts commit d72ccf8cb287df877221c874efb38f343f671e86.
|
|
Grub may be able to select a graphics mode and paint a splash screen
for us. If so it needs to be able to tell us it has done so. Add
support for detecting a new graphics mode selected bit in the
screen_info passed over at boot. Use this to automatically enable
vt_handoff mode.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
|
|
Introduce a new VT mode KD_TRANSPARENT which endevours to leave the current
content of the framebuffer untouched. This allows the bootloader to insert
a graphical splash and have the kernel maintain it until the OS splash
can take over. When we finally switch away (either through programs like
plymouth or manually) the content is lost and the VT reverts to text mode.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
|
|
Track pages which undergo readahead and for each record which were
actually consumed, via either read or faulted into a map. This allows
userspace readahead applications (such as ureadahead) to track which
pages in core at the end of a boot are actually required and generate an
optimal readahead pack. It also allows pack adjustment and optimisation
in parallel with readahead, allowing the pack to evolve to be accurate
as userspace paths change. The status of the pages are reported back via
the mincore() call using a newly allocated bit.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
|
|
Add a simple read-only counter to super_block that indicates deep this
is in the stack of filesystems. Previously ecryptfs was the only
stackable filesystem and it explicitly disallowed multiple layers of
itself.
Overlayfs, however, can be stacked recursively and also may be stacked
on top of ecryptfs or vice versa.
To limit the kernel stack usage we must limit the depth of the
filesystem stack. Initially the limit is set to 2.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
|
|
Overlayfs needs a private clone of the mount, so create a function for
this and export to modules.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
|
|
Add a new inode operation i_op->open(). This is for stacked
filesystems that want to return a struct file from a different
filesystem.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
|
|
This code is originally from Ingo Molnar, with some later rebasing and
fixes to respect all the randomization-disabling knobs. It provides
address randomization algorithm when NX emulation is in use in 32-bit
processes. Kees Cook pushed the brk area further away in the case of PIE
binaries landing their brk inside the CS limit.
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
|
|
This is old code with some cruft, all originally by Ingo Molnar with
much later rebasing by Fedora folks and at least one arcane fix by
Roland McGrath a few years ago. No longer uses exec-shield sysctl,
merged with disable_nx. Kees Cook fixed boottime NX reporting for various
corner cases.
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
|
|
Some application suites have external crash handlers that depend
on being able to use ptrace to generate crash reports (KDE, Wine,
Chromium, Firefox, etc). Since the inferior process has a defined
application-specific relationship with the debugger, allow the inferior
to express that relationship by declaring who can call PTRACE_ATTACH
against it. The inferior can use prctl() with PR_SET_PTRACER to allow a
specific PID and its descendants to perform the ptrace instead of only
a direct ancestor.
Signed-off-by: Kees Cook <kees.cook@canonical.com>
---
v2:
- kmalloc, spinlock init, and doc typo corrections from Tetsuo Handa.
- make sure to replace if possible on add, thanks to Eric Paris.
v3:
- make sure to use thread group leader when searching for exceptions.
v4:
- make sure to use thread group leader when creating exceptions.
v5:
- make sure to use thread group leader when deleting exceptions.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
|
|
The current LSM interface to cred_free is not sufficient for allowing
an LSM to track the life and death of a task. This patch adds the
task_free hook so that an LSM can clean up resources on task death.
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
|
|
Signed-off-by: Andy Whitcroft <apw@canonical.com>
|
|
Signed-off-by: Andy Whitcroft <apw@canonical.com>
|
|
Add compatibility for v5 network rules.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
|
|
BugLink: http://bugs.launchpad.net/bugs/586386
Some init packages such as upstart find having all of the kernel parameters
passed in useful. Currently they have to open up /proc/cmdline and
reparse that to obtain this information. Add a kernel configuration
option to enable passing of all options.
Note, enabling this option will reduce the chances that a fallback from
/sbin/init to /bin/bash or /bin/sh will succeed. Though it should be
noted that there are commonly unknown options present which would already
break this fallback. init=/bin/foo provides explicit control over options
which is unaffected by this change.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
|
|
Check to see if the machine has more than one active CPU, if it does
then it is worth starting the decode of the rootfs earlier.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
|
|
The expansion of the initramfs is completely independant of other
boot activities. The original data is already present at boot and the
filesystem is not required until we are ready to start init. It is
therefore reasonable to populate the rootfs asynchronously. Move this
processing to an async call.
This reduces kernel initialisation time (the time from bootloader to
starting userspace) by several 10ths of a second on a selection of test
hardware particularly SMP systems, although UP system also benefit.
Signed-off-by: Surbhi Palande <surbhi.palande@canonical.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
|
|
Code is required for ubuntu/compcache
Signed-off-by: Ben Collins <ben.collins@canonical.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
|
|
With a lot of small task, the softirq sched is nearly never called
when no_hz is enable. Te load_balance is mainly called with
the newly_idle mode which doesn't update the cpu_power.
Add a next_update field which ensure a maximum update period when
there is short activity
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
|
|
|
|
commit b35a35b556f5e6b7993ad0baf20173e75c09ce8c upstream.
This avoids duplicating the function in every arch gup_fast.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 1cd9f0976aa4606db8d6e3dc3edd0aca8019372a upstream.
This doesn't make much sense, and it exposes a bug in the kernel where
attempts to create a new file in an append-only directory using
O_CREAT will fail (but still leave a zero-length file). This was
discovered when xfstests #79 was generalized so it could run on all
file systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 70b50f94f1644e2aa7cb374819cfd93f3c28d725 upstream.
Michel while working on the working set estimation code, noticed that
calling get_page_unless_zero() on a random pfn_to_page(random_pfn)
wasn't safe, if the pfn ended up being a tail page of a transparent
hugepage under splitting by __split_huge_page_refcount().
He then found the problem could also theoretically materialize with
page_cache_get_speculative() during the speculative radix tree lookups
that uses get_page_unless_zero() in SMP if the radix tree page is freed
and reallocated and get_user_pages is called on it before
page_cache_get_speculative has a chance to call get_page_unless_zero().
So the best way to fix the problem is to keep page_tail->_count zero at
all times. This will guarantee that get_page_unless_zero() can never
succeed on any tail page. page_tail->_mapcount is guaranteed zero and
is unused for all tail pages of a compound page, so we can simply
account the tail page references there and transfer them to
tail_page->_count in __split_huge_page_refcount() (in addition to the
head_page->_mapcount).
While debugging this s/_count/_mapcount/ change I also noticed get_page is
called by direct-io.c on pages returned by get_user_pages. That wasn't
entirely safe because the two atomic_inc in get_page weren't atomic. As
opposed to other get_user_page users like secondary-MMU page fault to
establish the shadow pagetables would never call any superflous get_page
after get_user_page returns. It's safer to make get_page universally safe
for tail pages and to use get_page_foll() within follow_page (inside
get_user_pages()). get_page_foll() is safe to do the refcounting for tail
pages without taking any locks because it is run within PT lock protected
critical sections (PT lock for pte and page_table_lock for
pmd_trans_huge).
The standard get_page() as invoked by direct-io instead will now take
the compound_lock but still only for tail pages. The direct-io paths
are usually I/O bound and the compound_lock is per THP so very
finegrined, so there's no risk of scalability issues with it. A simple
direct-io benchmarks with all lockdep prove locking and spinlock
debugging infrastructure enabled shows identical performance and no
overhead. So it's worth it. Ideally direct-io should stop calling
get_page() on pages returned by get_user_pages(). The spinlock in
get_page() is already optimized away for no-THP builds but doing
get_page() on tail pages returned by GUP is generally a rare operation
and usually only run in I/O paths.
This new refcounting on page_tail->_mapcount in addition to avoiding new
RCU critical sections will also allow the working set estimation code to
work without any further complexity associated to the tail page
refcounting with THP.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 1fa1e7f615f4d3ae436fa319af6e4eebdd4026a8 upstream.
Since the commit below which added O_PATH support to the *at() calls, the
error return for readlink/readlinkat for the empty pathname has switched
from ENOENT to EINVAL:
commit 65cfc6722361570bfe255698d9cd4dccaf47570d
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun Mar 13 15:56:26 2011 -0400
readlinkat(), fchownat() and fstatat() with empty relative pathnames
This is both unexpected for userspace and makes readlink/readlinkat
inconsistant with all other interfaces; and inconsistant with our stated
return for these pathnames.
As the readlinkat call does not have a flags parameter we cannot use the
AT_EMPTY_PATH approach used in the other calls. Therefore expose whether
the original path is infact entry via a new user_path_at_empty() path
lookup function. Use this to determine whether to default to EINVAL or
ENOENT for failures.
Addresses http://bugs.launchpad.net/bugs/817187
[akpm@linux-foundation.org: remove unused getname_flags()]
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit f5252e009d5b87071a919221e4f6624184005368 upstream.
The /proc/vmallocinfo shows information about vmalloc allocations in
vmlist that is a linklist of vm_struct. It, however, may access pages
field of vm_struct where a page was not allocated. This results in a null
pointer access and leads to a kernel panic.
Why this happens: In __vmalloc_node_range() called from vmalloc(), newly
allocated vm_struct is added to vmlist at __get_vm_area_node() and then,
some fields of vm_struct such as nr_pages and pages are set at
__vmalloc_area_node(). In other words, it is added to vmlist before it is
fully initialized. At the same time, when the /proc/vmallocinfo is read,
it accesses the pages field of vm_struct according to the nr_pages field
at show_numa_info(). Thus, a null pointer access happens.
The patch adds the newly allocated vm_struct to the vmlist *after* it is
fully initialized. So, it can avoid accessing the pages field with
unallocated page when show_numa_info() is called.
Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 24dd85ff723f142093f44244764b9b5c152235b8 upstream.
For the !HAVE_ATOMIC_IOMAP case the stub functions did not call
pagefault_disable/_enable. The i915 driver relies on the map
actually being atomic, otherwise it can deadlock with it's own
pagefault handler in the gtt pwrite fastpath.
This is exercised by gem_mmap_gtt from the intel-gpu-toosl gem
testsuite.
v2: Chris Wilson noted the lack of an include.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38115
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 9bab0b7fbaceec47d32db51cd9e59c82fb071f5a upstream.
This adds a mechanism to resume selected IRQs during syscore_resume
instead of dpm_resume_noirq.
Under Xen we need to resume IRQs associated with IPIs early enough
that the resched IPI is unmasked and we can therefore schedule
ourselves out of the stop_machine where the suspend/resume takes
place.
This issue was introduced by 676dc3cf5bc3 "xen: Use IRQF_FORCE_RESUME".
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/1318713254.11016.52.camel@dagon.hellion.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit cbbc719fccdb8cbd87350a05c0d33167c9b79365 upstream.
The parameter's origin type is long. On an i386 architecture, it can
easily be larger than 0x80000000, causing this function to convert it
to a sign-extended u64 type.
Change the type to unsigned long so we get the correct result.
Signed-off-by: hank <pyu@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
[ build fix ]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit da92b194cc36b5dc1fbd85206aeeffd80bee0c39 upstream.
The pair of functions,
* skb_clone_tx_timestamp()
* skb_complete_tx_timestamp()
were designed to allow timestamping in PHY devices. The first
function, called during the MAC driver's hard_xmit method, identifies
PTP protocol packets, clones them, and gives them to the PHY device
driver. The PHY driver may hold onto the packet and deliver it at a
later time using the second function, which adds the packet to the
socket's error queue.
As pointed out by Johannes, nothing prevents the socket from
disappearing while the cloned packet is sitting in the PHY driver
awaiting a timestamp. This patch fixes the issue by taking a reference
on the socket for each such packet. In addition, the comments
regarding the usage of these function are expanded to highlight the
rule that PHY drivers must use skb_complete_tx_timestamp() to release
the packet, in order to release the socket reference, too.
These functions first appeared in v2.6.36.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit c1225158a8dad9e9d5eee8a17dbbd9c7cda05ab9 upstream.
The same function is used by idmap, gss and blocklayout code. Make it
generic.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 276532ba9666b36974cbe16f303fc8be99c9da17 upstream.
The Kirkwood gave an unaligned memory access error on
line 742 of drivers/usb/host/echi-hcd.c:
"ehci->last_periodic_enable = ktime_get_real();"
Signed-off-by: Harro Haan <hrhaan@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit fa90e1c935472281de314e6d7c9a37db9cbc2e4e upstream.
If tty_add_file fails at the point it is now, we have to revert all
the changes we did to the tty. It means either decrease all refcounts
if this was a tty reopen or delete the tty if it was newly allocated.
There was a try to fix this in v3.0-rc2 using tty_release in 0259894c7
(TTY: fix fail path in tty_open). But instead it introduced a NULL
dereference. It's because tty_release dereferences
filp->private_data, but that one is set even in our tty_add_file. And
when tty_add_file fails, it's still NULL/garbage. Hence tty_release
cannot be called there.
To circumvent the original leak (and the current NULL deref) we split
tty_add_file into two functions, making the latter non-failing. In
that case we may do the former early in open, where handling failures
is easy. The latter stays as it is now. So there is no change in
functionality.
The original bug (leak) was introduced by f573bd176 (tty: Remove
__GFP_NOFAIL from tty_add_file()). Thanks Dan for reporting this.
Later, we may split tty_release into more functions and call only some
of them in this fail path instead. (If at all possible.)
Introduced-in: v2.6.37-rc2
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
git://git.secretlab.ca/git/linux-2.6 into linaro-3.1
|
|
This patch adds the ability to set the device id in the AUXDATA structure for
those few device drivers that just have to have a statically defined device id.
Signed-off-by: John Bonesio <bones@secretlab.ca>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
Add an empty macro for of_match_node() that will save
some '#ifdef CONFIG_OF' for non-dt builds.
I have chosen to use a macro instead of a function to
be able to avoid defining the first parameter.
In fact, this "struct of_device_id *" first parameter
is usualy not defined as well on non-dt builds.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
Add empty of_device_is_compatible() and of_parse_phandle() for non-dt
builds to work.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
* 'for-linus' of http://people.redhat.com/agk/git/linux-dm:
dm crypt: always disable discard_zeroes_data
dm: raid fix write_mostly arg validation
dm table: avoid crash if integrity profile changes
dm: flakey fix corrupt_bio_byte error path
|
|
devicetree/next
|
|
Add a helper similar to of_property_read_u32() that handles 64-bit
integers.
v2/v3: constify device node and property name parameters.
Cc: Grant Likely <grant.likely@secretlab.ca>
Reviewed-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
* git://github.com/davem330/net:
pch_gbe: Fixed the issue on which a network freezes
pch_gbe: Fixed the issue on which PC was frozen when link was downed.
make PACKET_STATISTICS getsockopt report consistently between ring and non-ring
net: xen-netback: correctly restart Tx after a VM restore/migrate
bonding: properly stop queuing work when requested
can bcm: fix incomplete tx_setup fix
RDSRDMA: Fix cleanup of rds_iw_mr_pool
net: Documentation: Fix type of variables
ibmveth: Fix oops on request_irq failure
ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket
cxgb4: Fix EEH on IBM P7IOC
can bcm: fix tx_setup off-by-one errors
MAINTAINERS: tehuti: Alexander Indenbaum's address bounces
dp83640: reduce driver noise
ptp: fix L2 event message recognition
|
|
Add the ability to disable PCI-E MPS turning and using the BIOS
configured MPS defaults. Due to the number of issues recently
discovered on some x86 chipsets, make this the default behavior.
Also, add the option for peer to peer DMA MPS configuration. Peer to
peer DMA is outside the scope of this patch, but MPS configuration could
prevent it from working by having the MPS on one root port different
than the MPS on another. To work around this, simply make the system
wide MPS the smallest possible value (128B).
Signed-off-by: Jon Mason <mason@myri.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip
* 'irq-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
irq: Fix check for already initialized irq_domain in irq_domain_add
irq: Add declaration of irq_domain_simple_ops to irqdomain.h
* 'x86-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
x86/rtc: Don't recursively acquire rtc_lock
* 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
posix-cpu-timers: Cure SMP wobbles
sched: Fix up wchan borkage
sched/rt: Migrate equal priority tasks to available CPUs
|
|
David reported:
Attached below is a watered-down version of rt/tst-cpuclock2.c from
GLIBC. Just build it with "gcc -o test test.c -lpthread -lrt" or
similar.
Run it several times, and you will see cases where the main thread
will measure a process clock difference before and after the nanosleep
which is smaller than the cpu-burner thread's individual thread clock
difference. This doesn't make any sense since the cpu-burner thread
is part of the top-level process's thread group.
I've reproduced this on both x86-64 and sparc64 (using both 32-bit and
64-bit binaries).
For example:
[davem@boricha build-x86_64-linux]$ ./test
process: before(0.001221967) after(0.498624371) diff(497402404)
thread: before(0.000081692) after(0.498316431) diff(498234739)
self: before(0.001223521) after(0.001240219) diff(16698)
[davem@boricha build-x86_64-linux]$
The diff of 'process' should always be >= the diff of 'thread'.
I make sure to wrap the 'thread' clock measurements the most tightly
around the nanosleep() call, and that the 'process' clock measurements
are the outer-most ones.
---
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <fcntl.h>
#include <string.h>
#include <errno.h>
#include <pthread.h>
static pthread_barrier_t barrier;
static void *chew_cpu(void *arg)
{
pthread_barrier_wait(&barrier);
while (1)
__asm__ __volatile__("" : : : "memory");
return NULL;
}
int main(void)
{
clockid_t process_clock, my_thread_clock, th_clock;
struct timespec process_before, process_after;
struct timespec me_before, me_after;
struct timespec th_before, th_after;
struct timespec sleeptime;
unsigned long diff;
pthread_t th;
int err;
err = clock_getcpuclockid(0, &process_clock);
if (err)
return 1;
err = pthread_getcpuclockid(pthread_self(), &my_thread_clock);
if (err)
return 1;
pthread_barrier_init(&barrier, NULL, 2);
err = pthread_create(&th, NULL, chew_cpu, NULL);
if (err)
return 1;
err = pthread_getcpuclockid(th, &th_clock);
if (err)
return 1;
pthread_barrier_wait(&barrier);
err = clock_gettime(process_clock, &process_before);
if (err)
return 1;
err = clock_gettime(my_thread_clock, &me_before);
if (err)
return 1;
err = clock_gettime(th_clock, &th_before);
if (err)
return 1;
sleeptime.tv_sec = 0;
sleeptime.tv_nsec = 500000000;
nanosleep(&sleeptime, NULL);
err = clock_gettime(th_clock, &th_after);
if (err)
return 1;
err = clock_gettime(my_thread_clock, &me_after);
if (err)
return 1;
err = clock_gettime(process_clock, &process_after);
if (err)
return 1;
diff = process_after.tv_nsec - process_before.tv_nsec;
printf("process: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
process_before.tv_sec, process_before.tv_nsec,
process_after.tv_sec, process_after.tv_nsec, diff);
diff = th_after.tv_nsec - th_before.tv_nsec;
printf("thread: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
th_before.tv_sec, th_before.tv_nsec,
th_after.tv_sec, th_after.tv_nsec, diff);
diff = me_after.tv_nsec - me_before.tv_nsec;
printf("self: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
me_before.tv_sec, me_before.tv_nsec,
me_after.tv_sec, me_after.tv_nsec, diff);
return 0;
}
This is due to us using p->se.sum_exec_runtime in
thread_group_cputime() where we iterate the thread group and sum all
data. This does not take time since the last schedule operation (tick
or otherwise) into account. We can cure this by using
task_sched_runtime() at the cost of having to take locks.
This also means we can (and must) do away with
thread_group_sched_runtime() since the modified thread_group_cputime()
is now more accurate and would deadlock when called from
thread_group_sched_runtime().
Aside of that it makes the function safe on 32 bit systems. The old
code added t->se.sum_exec_runtime unprotected. sum_exec_runtime is a
64bit value and could be changed on another cpu at the same time.
Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1314874459.7945.22.camel@twins
Tested-by: David Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Add a macro of_match_ptr() that allows the .of_match_table
entry in the driver structures to be assigned without having
an #ifdef xxx NULL for the case that OF is not enabled
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
The IEEE 1588 standard defines two kinds of messages, event and general
messages. Event messages require time stamping, and general do not. When
using UDP transport, two separate ports are used for the two message
types.
The BPF designed to recognize event messages incorrectly classifies L2
general messages as event messages. This commit fixes the issue by
extending the filter to check the message type field for L2 PTP packets.
Event messages are be distinguished from general messages by testing
the "general" bit.
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Cc: <stable@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
That flag no longer makes sense, since we don't look up automount points
as eagerly any more. Additionally, it turns out that the NO_AUTOMOUNT
handling was buggy to begin with: it would avoid automounting even for
cases where we really *needed* to do the automount handling, and could
return ENOENT for autofs entries that hadn't been instantiated yet.
With our new non-eager automount semantics, one discussion has been
about adding a AT_AUTOMOUNT flag to vfs_fstatat (and thus the
newfstatat() and fstatat64() system calls), but it's probably not worth
it: you can always force at least directory automounting by simply
adding the final '/' to the filename, which works for *all* of the stat
family system calls, old and new.
So AT_NO_AUTOMOUNT (and thus LOOKUP_NO_AUTOMOUNT) really were just a
result of our bad default behavior.
Acked-by: Ian Kent <raven@themaw.net>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
