aboutsummaryrefslogtreecommitdiff
path: root/fs/btrfs/async-thread.c
AgeCommit message (Collapse)Author
2010-05-25Btrfs: don't walk around with task->state != TASK_RUNNINGChris Mason
Yan Zheng noticed two places we were doing a lot of work without task->state set to TASK_RUNNING. This sets the state properly after we get ready to sleep but decide not to. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-10-05Btrfs: fix deadlock on async thread startupChris Mason
The btrfs async worker threads are used for a wide variety of things, including processing bio end_io functions. This means that when the endio threads aren't running, the rest of the FS isn't able to do the final processing required to clear PageWriteback. The endio threads also try to exit as they become idle and start more as the work piles up. The problem is that starting more threads means kthreadd may need to allocate ram, and that allocation may wait until the global number of writeback pages on the system is below a certain limit. The result of that throttling is that end IO threads wait on kthreadd, who is waiting on IO to end, which will never happen. This commit fixes the deadlock by handing off thread startup to a dedicated thread. It also fixes a bug where the on-demand thread creation was creating far too many threads because it didn't take into account threads being started by other procs. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-15Btrfs: Fix async thread shutdown raceChris Mason
It was possible for an async worker thread to be selected to receive a new work item, but exit before the work item was actually placed into that thread's work list. This commit fixes the race by incrementing the num_pending counter earlier, and making sure to check the number of pending work items before a thread exits. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-15Btrfs: fix worker thread double spin_lock_irqChris Mason
The exit-on-idle code for async worker threads was incorrectly calling spin_lock_irq with interrupts already off. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-15Btrfs: fix async worker startup raceChris Mason
After a new worker thread starts, it is placed into the list of idle threads. But, this may race with a check for idle done by the worker thread itself, resulting in a double list_add operation. This fix adds a check to make sure the idle thread addition is done properly. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11Btrfs: reduce worker thread spin_lock_irq hold timesChris Mason
This changes the btrfs worker threads to batch work items into a local list. It allows us to pull work items in large chunks and significantly reduces the number of times we need to take the worker thread spinlock. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11Btrfs: keep irqs on more often in the worker threadsChris Mason
The btrfs worker thread spinlock was being used both for the queueing of IO and for the processing of ordered events. The ordered events never happen from end_io handlers, and so they don't need to use the _irq version of spinlocks. This adds a dedicated lock to the ordered lists so they don't have to run with irqs off. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-11Btrfs: Allow worker threads to exit when idleChris Mason
The Btrfs worker threads don't currently die off after they have been idle for a while, leading to a lot of threads sitting around doing nothing for each mount. Also, they are unable to start atomically (from end_io hanlders). This commit reworks the worker threads so they can be started from end_io handlers (just setting a flag that asks for a thread to be added at a later date) and so they can exit if they have been idle for a long time. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-07-22Btrfs: convert nested spin_lock_irqsave to spin_lockJulia Lawall
If spin_lock_irqsave is called twice in a row with the same second argument, the interrupt state at the point of the second call overwrites the value saved by the first call. Indeed, the second call does not need to save the interrupt state, so it is changed to a simple spin_lock. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-07-02Btrfs: fix use after free in btrfs_start_workers fail pathJiri Slaby
worker memory is already freed on one fail path in btrfs_start_workers, but is still dereferenced. Switch the dereference and kfree. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10Btrfs: init worker struct fields before kthread-runShin Hong
This patch fixes a bug which may result race condition between btrfs_start_workers() and worker_loop(). btrfs_start_workers() executed in a parent thread writes on workers->worker and worker_loop() in a child thread reads workers->worker. However, there is no synchronization enforcing the order of two operations. This patch makes btrfs_start_workers() fill workers->worker before it starts a child thread with worker_loop() Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-20Btrfs: add a priority queue to the async thread helpersChris Mason
Btrfs is using WRITE_SYNC_PLUG to send down synchronous IOs with a higher priority. But, the checksumming helper threads prevent it from being fully effective. There are two problems. First, a big queue of pending checksumming will delay the synchronous IO behind other lower priority writes. Second, the checksumming uses an ordered async work queue. The ordering makes sure that IOs are sent to the block layer in the same order they are sent to the checksumming threads. Usually this gives us less seeky IO. But, when we start mixing IO priorities, the lower priority IO can delay the higher priority IO. This patch solves both problems by adding a high priority list to the async helper threads, and a new btrfs_set_work_high_prio(), which is used to make put a new async work item onto the higher priority list. The ordering is still done on high priority IO, but all of the high priority bios are ordered separately from the low priority bios. This ordering is purely an IO optimization, it is not involved in data or metadata integrity. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02Btrfs: remove unused ftrace includeJim Owens
Signed-off-by: jim owens <jowens@hp.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02Btrfs: fix race in worker_loopAmit Gud
Need to check kthread_should_stop after schedule_timeout() before calling schedule(). This causes threads to sleep with potentially no one to wake them up causing mount(2) to hang in btrfs_stop_workers waiting for threads to stop. Signed-off-by: Amit Gud <gud@ksu.edu> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04Btrfs: async threads should try harder to find workChris Mason
Tracing shows the delay between when an async thread goes to sleep and when more work is added is often very short. This commit adds a little bit of delay and extra checking to the code right before we schedule out. It allows more work to be added to the worker without requiring notifications from other procs. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-04Btrfs: Catch missed bios in the async bio submission threadChris Mason
The async bio submission thread was missing some bios that were added after it had decided there was no work left to do. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-21Btrfs: removed unused #include <version.h>'sHuang Weiyi
Removed unused #include <version.h>'s in btrfs Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-05Btrfs: Fix checkpatch.pl warningsChris Mason
There were many, most are fixed now. struct-funcs.c generates some warnings but these are bogus. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-11-12Btrfs: Check kthread_should_stop() before schedule() in worker_loopyanhai zhu
In worker_loop(), the func should check whether it has been requested to stop before it decides to schedule out. Otherwise if the stop request(also the last wake_up()) sent by btrfs_stop_workers() happens when worker_loop() running after the "while" judgement and before schedule(), woker_loop() will schedule away and never be woken up, which will also cause btrfs_stop_workers() wait forever. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-11-06Btrfs: Add ordered async work queuesChris Mason
Btrfs uses kernel threads to create async work queues for cpu intensive operations such as checksumming and decompression. These work well, but they make it difficult to keep IO order intact. A single writepages call from pdflush or fsync will turn into a number of bios, and each bio is checksummed in parallel. Once the checksum is computed, the bio is sent down to the disk, and since we don't control the order in which the parallel operations happen, they might go down to the disk in almost any order. The code deals with this somewhat by having deep work queues for a single kernel thread, making it very likely that a single thread will process all the bios for a single inode. This patch introduces an explicitly ordered work queue. As work structs are placed into the queue they are put onto the tail of a list. They have three callbacks: ->func (cpu intensive processing here) ->ordered_func (order sensitive processing here) ->ordered_free (free the work struct, all processing is done) The work struct has three callbacks. The func callback does the cpu intensive work, and when it completes the work struct is marked as done. Every time a work struct completes, the list is checked to see if the head is marked as done. If so the ordered_func callback is used to do the order sensitive processing and the ordered_free callback is used to do any cleanup. Then we loop back and check the head of the list again. This patch also changes the checksumming code to use the ordered workqueues. One a 4 drive array, it increases streaming writes from 280MB/s to 350MB/s. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-30Btrfs: fix multi-device code to use raid policies set by mkfsChris Mason
When reading in block groups, a global mask of the available raid policies should be adjusted based on the types of block groups found on disk. This global mask is then used to decide which raid policy to use for new block groups. The recent allocator changes dropped the call that updated the global mask, making all the block groups allocated at run time single striped onto a single drive. This also fixes the async worker threads to set any thread that uses the requeue mechanism as busy. This allows us to avoid blocking on get_request_wait for the async bio submission threads. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-29Btrfs: add and improve commentsChris Mason
This improves the comments at the top of many functions. It didn't dive into the guts of functions because I was trying to avoid merging problems with the new allocator and back reference work. extent-tree.c and volumes.c were both skipped, and there is definitely more work todo in cleaning and commenting the code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Remove Btrfs compat code for older kernelsChris Mason
Btrfs had compatibility code for kernels back to 2.6.18. These have been removed, and will be maintained in a separate backport git tree from now on. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Lower contention on the csum mutexChris Mason
This takes the csum mutex deeper in the call chain and releases it more often. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Wait for kernel threads to make progress during async submissionChris Mason
Before this change, btrfs would use a bdi congestion function to make sure there weren't too many pending async checksum work items. This change makes the process creating async work items wait instead, leading to fewer congestion returns from the bdi. This improves pdflush background_writeout scanning. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Give all the worker threads descriptive namesChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Fix streaming read performance with checksumming onChris Mason
Large streaming reads make for large bios, which means each entry on the list async work queues represents a large amount of data. IO congestion throttling on the device was kicking in before the async worker threads decided a single thread was busy and needed some help. The end result was that a streaming read would result in a single CPU running at 100% instead of balancing the work off to other CPUs. This patch also changes the pre-IO checksum lookup done by reads to work on a per-bio basis instead of a per-page. This results in many extra btree lookups on large streaming reads. Doing the checksum lookup right before bio submit allows us to reuse searches while processing adjacent offsets. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: async-thread: fix possible memory leakLi Zefan
When kthread_run() returns failure, this worker hasn't been added to the list, so btrfs_stop_workers() won't free it. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Worker thread optimizationsChris Mason
This changes the worker thread pool to maintain a list of idle threads, avoiding a complex search for a good thread to wake up. Threads have two states: idle - we try to reuse the last thread used in hopes of improving the batching ratios busy - each time a new work item is added to a busy task, the task is rotated to the end of the line. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Add backport for the kthread work on kernels older than 2.6.20Chris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Add async worker threads for pre and post IO checksummingChris Mason
Btrfs has been using workqueues to spread the checksumming load across other CPUs in the system. But, workqueues only schedule work on the same CPU that queued the work, giving them a limited benefit for systems with higher CPU counts. This code adds a generic facility to schedule work with pools of kthreads, and changes the bio submission code to queue bios up. The queueing is important to make sure large numbers of procs on the system don't turn streaming workloads into random workloads by sending IO down concurrently. The end result of all of this is much higher performance (and CPU usage) when doing checksumming on large machines. Two worker pools are created, one for writes and one for endio processing. The two could deadlock if we tried to service both from a single pool. Signed-off-by: Chris Mason <chris.mason@oracle.com>