diff options
Diffstat (limited to 'drivers/staging/rts5139/ms.h')
| -rw-r--r-- | drivers/staging/rts5139/ms.h | 263 |
1 files changed, 263 insertions, 0 deletions
diff --git a/drivers/staging/rts5139/ms.h b/drivers/staging/rts5139/ms.h new file mode 100644 index 00000000000..f9d46d210f2 --- /dev/null +++ b/drivers/staging/rts5139/ms.h @@ -0,0 +1,263 @@ +/* Driver for Realtek RTS51xx USB card reader + * Header file + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * wwang (wei_wang@realsil.com.cn) + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + * Maintainer: + * Edwin Rong (edwin_rong@realsil.com.cn) + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + */ + +#ifndef __RTS51X_MS_H +#define __RTS51X_MS_H + +#include "rts51x_chip.h" + +#define MS_MAX_RETRY_COUNT 3 + +#define MS_EXTRA_SIZE 0x9 + +#define WRT_PRTCT 0x01 + +/* Error Code */ +#define MS_NO_ERROR 0x00 +#define MS_CRC16_ERROR 0x80 +#define MS_TO_ERROR 0x40 +#define MS_NO_CARD 0x20 +#define MS_NO_MEMORY 0x10 +#define MS_CMD_NK 0x08 +#define MS_FLASH_READ_ERROR 0x04 +#define MS_FLASH_WRITE_ERROR 0x02 +#define MS_BREQ_ERROR 0x01 +#define MS_NOT_FOUND 0x03 + +/* Transfer Protocol Command */ +#define READ_PAGE_DATA 0x02 +#define READ_REG 0x04 +#define GET_INT 0x07 +#define WRITE_PAGE_DATA 0x0D +#define WRITE_REG 0x0B +#define SET_RW_REG_ADRS 0x08 +#define SET_CMD 0x0E + +#define PRO_READ_LONG_DATA 0x02 +#define PRO_READ_SHORT_DATA 0x03 +#define PRO_READ_REG 0x04 +#define PRO_READ_QUAD_DATA 0x05 +#define PRO_GET_INT 0x07 +#define PRO_WRITE_LONG_DATA 0x0D +#define PRO_WRITE_SHORT_DATA 0x0C +#define PRO_WRITE_QUAD_DATA 0x0A +#define PRO_WRITE_REG 0x0B +#define PRO_SET_RW_REG_ADRS 0x08 +#define PRO_SET_CMD 0x0E +#define PRO_EX_SET_CMD 0x09 + +#ifdef SUPPORT_MAGIC_GATE +#define MG_GET_ID 0x40 +#define MG_SET_LID 0x41 +#define MG_GET_LEKB 0x42 +#define MG_SET_RD 0x43 +#define MG_MAKE_RMS 0x44 +#define MG_MAKE_KSE 0x45 +#define MG_SET_IBD 0x46 +#define MG_GET_IBD 0x47 +#endif + +#ifdef XC_POWERCLASS +#define XC_CHG_POWER 0x16 +#endif + +/* ++ CMD over Memory Stick */ +/* Flash CMD */ +#define BLOCK_READ 0xAA +#define BLOCK_WRITE 0x55 +#define BLOCK_END 0x33 +#define BLOCK_ERASE 0x99 +#define FLASH_STOP 0xCC + +/* Function CMD */ +#define SLEEP 0x5A +#define CLEAR_BUF 0xC3 +#define MS_RESET 0x3C +/* -- CMD over Memory Stick */ + +/* ++ CMD over Memory Stick Pro */ +/* Flash CMD */ +#define PRO_READ_DATA 0x20 +#define PRO_WRITE_DATA 0x21 +#define PRO_READ_ATRB 0x24 +#define PRO_STOP 0x25 +#define PRO_ERASE 0x26 +#define PRO_READ_2K_DATA 0x27 +#define PRO_WRITE_2K_DATA 0x28 + +/* Function CMD */ +#define PRO_FORMAT 0x10 +#define PRO_SLEEP 0x11 +/* -- CMD over Memory Stick Pro */ + +/* register inside memory stick */ +#define IntReg 0x01 +#define StatusReg0 0x02 +#define StatusReg1 0x03 + +#define SystemParm 0x10 +#define BlockAdrs 0x11 +#define CMDParm 0x14 +#define PageAdrs 0x15 + +#define OverwriteFlag 0x16 +#define ManagemenFlag 0x17 +#define LogicalAdrs 0x18 +#define ReserveArea 0x1A + +/* register inside memory pro */ +#define Pro_IntReg 0x01 +#define Pro_StatusReg 0x02 +#define Pro_TypeReg 0x04 +#define Pro_IFModeReg 0x05 +#define Pro_CatagoryReg 0x06 +#define Pro_ClassReg 0x07 + +#define Pro_SystemParm 0x10 +#define Pro_DataCount1 0x11 +#define Pro_DataCount0 0x12 +#define Pro_DataAddr3 0x13 +#define Pro_DataAddr2 0x14 +#define Pro_DataAddr1 0x15 +#define Pro_DataAddr0 0x16 + +#define Pro_TPCParm 0x17 +#define Pro_CMDParm 0x18 + +/* define for INT Register */ +#define INT_REG_CED 0x80 +#define INT_REG_ERR 0x40 +#define INT_REG_BREQ 0x20 +#define INT_REG_CMDNK 0x01 + +/* INT signal */ +#define INT_CED 0x01 +#define INT_ERR 0x02 +#define INT_BREQ 0x04 +#define INT_CMDNK 0x08 + +/* define for OverwriteFlag Register */ +#define BLOCK_BOOT 0xC0 +#define BLOCK_OK 0x80 +#define PAGE_OK 0x60 +#define DATA_COMPL 0x10 + +/* define for ManagemenFlag Register */ +#define NOT_BOOT_BLOCK 0x4 +#define NOT_TRANSLATION_TABLE 0x8 + +/* Header */ +#define HEADER_ID0 (PPBUF_BASE2) /* 0 */ +#define HEADER_ID1 (PPBUF_BASE2 + 1) /* 1 */ +/* System Entry */ +#define DISABLED_BLOCK0 (PPBUF_BASE2 + 0x170 + 4) /* 2 */ +#define DISABLED_BLOCK1 (PPBUF_BASE2 + 0x170 + 5) /* 3 */ +#define DISABLED_BLOCK2 (PPBUF_BASE2 + 0x170 + 6) /* 4 */ +#define DISABLED_BLOCK3 (PPBUF_BASE2 + 0x170 + 7) /* 5 */ +/* Boot & Attribute Information */ +#define BLOCK_SIZE_0 (PPBUF_BASE2 + 0x1a0 + 2) /* 6 */ +#define BLOCK_SIZE_1 (PPBUF_BASE2 + 0x1a0 + 3) /* 7 */ +#define BLOCK_COUNT_0 (PPBUF_BASE2 + 0x1a0 + 4) /* 8 */ +#define BLOCK_COUNT_1 (PPBUF_BASE2 + 0x1a0 + 5) /* 9 */ +#define EBLOCK_COUNT_0 (PPBUF_BASE2 + 0x1a0 + 6) /* 10 */ +#define EBLOCK_COUNT_1 (PPBUF_BASE2 + 0x1a0 + 7) /* 11 */ +#define PAGE_SIZE_0 (PPBUF_BASE2 + 0x1a0 + 8) /* 12 */ +#define PAGE_SIZE_1 (PPBUF_BASE2 + 0x1a0 + 9) /* 13 */ + +/* joey 2004-08-07 for MS check Procedure */ +#define MS_Device_Type (PPBUF_BASE2 + 0x1D8) /* 14 */ +/* end */ + +/* joey 2004-05-03 */ +#define MS_4bit_Support (PPBUF_BASE2 + 0x1D3) /* 15 */ +/* end */ + +#define setPS_NG 1 +#define setPS_Error 0 + +/* define for Pro_SystemParm Register */ +#define PARALLEL_8BIT_IF 0x40 +#define PARALLEL_4BIT_IF 0x00 +#define SERIAL_IF 0x80 + +/* define for StatusReg0 Register */ +#define BUF_FULL 0x10 +#define BUF_EMPTY 0x20 + +/* define for StatusReg1 Register */ +#define MEDIA_BUSY 0x80 +#define FLASH_BUSY 0x40 +#define DATA_ERROR 0x20 +#define STS_UCDT 0x10 +#define EXTRA_ERROR 0x08 +#define STS_UCEX 0x04 +#define FLAG_ERROR 0x02 +#define STS_UCFG 0x01 + +#define MS_SHORT_DATA_LEN 32 + +#define FORMAT_SUCCESS 0 +#define FORMAT_FAIL 1 +#define FORMAT_IN_PROGRESS 2 + +#define MS_SET_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag |= 0x80) +#define MS_CLR_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag &= 0x7F) +#define MS_TST_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag & 0x80) + +#define CHECK_MS_TRANS_FAIL(chip, retval) \ + (((retval) != STATUS_SUCCESS) || \ + (chip->rsp_buf[0] & MS_TRANSFER_ERR)) + +void mspro_polling_format_status(struct rts51x_chip *chip); +void mspro_format_sense(struct rts51x_chip *chip, unsigned int lun); + +void mspro_stop_seq_mode(struct rts51x_chip *chip); +int reset_ms_card(struct rts51x_chip *chip); +int ms_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector, + u16 sector_cnt); +int mspro_format(struct scsi_cmnd *srb, struct rts51x_chip *chip, + int short_data_len, int quick_format); +void ms_free_l2p_tbl(struct rts51x_chip *chip); +void ms_cleanup_work(struct rts51x_chip *chip); +int ms_power_off_card3v3(struct rts51x_chip *chip); +int release_ms_card(struct rts51x_chip *chip); +int ms_delay_write(struct rts51x_chip *chip); + +#ifdef SUPPORT_MAGIC_GATE + +int ms_switch_clock(struct rts51x_chip *chip); +int ms_write_bytes(struct rts51x_chip *chip, u8 tpc, u8 cnt, u8 cfg, u8 * data, + int data_len); +int ms_read_bytes(struct rts51x_chip *chip, u8 tpc, u8 cnt, u8 cfg, u8 * data, + int data_len); +int ms_set_rw_reg_addr(struct rts51x_chip *chip, u8 read_start, u8 read_cnt, + u8 write_start, u8 write_cnt); +int ms_transfer_data(struct rts51x_chip *chip, u8 trans_mode, u8 tpc, + u16 sec_cnt, u8 cfg, int mode_2k, int use_sg, void *buf, + int buf_len); +#endif + +#endif /* __RTS51X_MS_H */ |