Minimum files for lt-omap package creation

7 files changed, 7203 insertions, 0 deletions

diff --git a/debian.linaro/ci/rr-cache/13732fc78bd4b94f04af9e96cda9d28c4986f4a5/postimage b/debian.linaro/ci/rr-cache/13732fc78bd4b94f04af9e96cda9d28c4986f4a5/postimage
new file mode 100644
index 0000000..4fd9171
--- /dev/null
+++ b/debian.linaro/ci/rr-cache/13732fc78bd4b94f04af9e96cda9d28c4986f4a5/postimage
@@ -0,0 +1,1577 @@
+VERSION = 3
+PATCHLEVEL = 1
+SUBLEVEL = 4
+EXTRAVERSION =
+NAME = "Divemaster Edition"
+
+# *DOCUMENTATION*
+# To see a list of typical targets execute "make help"
+# More info can be located in ./README
+# Comments in this file are targeted only to the developer, do not
+# expect to learn how to build the kernel reading this file.
+
+# Do not:
+# o  use make's built-in rules and variables
+#    (this increases performance and avoids hard-to-debug behaviour);
+# o  print "Entering directory ...";
+MAKEFLAGS += -rR --no-print-directory
+
+# Avoid funny character set dependencies
+unexport LC_ALL
+LC_COLLATE=C
+LC_NUMERIC=C
+export LC_COLLATE LC_NUMERIC
+
+# We are using a recursive build, so we need to do a little thinking
+# to get the ordering right.
+#
+# Most importantly: sub-Makefiles should only ever modify files in
+# their own directory. If in some directory we have a dependency on
+# a file in another dir (which doesn't happen often, but it's often
+# unavoidable when linking the built-in.o targets which finally
+# turn into vmlinux), we will call a sub make in that other dir, and
+# after that we are sure that everything which is in that other dir
+# is now up to date.
+#
+# The only cases where we need to modify files which have global
+# effects are thus separated out and done before the recursive
+# descending is started. They are now explicitly listed as the
+# prepare rule.
+
+# To put more focus on warnings, be less verbose as default
+# Use 'make V=1' to see the full commands
+
+ifeq ("$(origin V)", "command line")
+  KBUILD_VERBOSE = $(V)
+endif
+ifndef KBUILD_VERBOSE
+  KBUILD_VERBOSE = 0
+endif
+
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "Documentation/sparse.txt" for more details, including
+# where to get the "sparse" utility.
+
+ifeq ("$(origin C)", "command line")
+  KBUILD_CHECKSRC = $(C)
+endif
+ifndef KBUILD_CHECKSRC
+  KBUILD_CHECKSRC = 0
+endif
+
+# Use make M=dir to specify directory of external module to build
+# Old syntax make ... SUBDIRS=$PWD is still supported
+# Setting the environment variable KBUILD_EXTMOD take precedence
+ifdef SUBDIRS
+  KBUILD_EXTMOD ?= $(SUBDIRS)
+endif
+
+ifeq ("$(origin M)", "command line")
+  KBUILD_EXTMOD := $(M)
+endif
+
+# kbuild supports saving output files in a separate directory.
+# To locate output files in a separate directory two syntaxes are supported.
+# In both cases the working directory must be the root of the kernel src.
+# 1) O=
+# Use "make O=dir/to/store/output/files/"
+#
+# 2) Set KBUILD_OUTPUT
+# Set the environment variable KBUILD_OUTPUT to point to the directory
+# where the output files shall be placed.
+# export KBUILD_OUTPUT=dir/to/store/output/files/
+# make
+#
+# The O= assignment takes precedence over the KBUILD_OUTPUT environment
+# variable.
+
+
+# KBUILD_SRC is set on invocation of make in OBJ directory
+# KBUILD_SRC is not intended to be used by the regular user (for now)
+ifeq ($(KBUILD_SRC),)
+
+# OK, Make called in directory where kernel src resides
+# Do we want to locate output files in a separate directory?
+ifeq ("$(origin O)", "command line")
+  KBUILD_OUTPUT := $(O)
+endif
+
+ifeq ("$(origin W)", "command line")
+  export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
+endif
+
+# That's our default target when none is given on the command line
+PHONY := _all
+_all:
+
+# Cancel implicit rules on top Makefile
+$(CURDIR)/Makefile Makefile: ;
+
+ifneq ($(KBUILD_OUTPUT),)
+# Invoke a second make in the output directory, passing relevant variables
+# check that the output directory actually exists
+saved-output := $(KBUILD_OUTPUT)
+KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
+$(if $(KBUILD_OUTPUT),, \
+     $(error output directory "$(saved-output)" does not exist))
+
+PHONY += $(MAKECMDGOALS) sub-make
+
+$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
+	$(Q)@:
+
+sub-make: FORCE
+	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
+	KBUILD_SRC=$(CURDIR) \
+	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
+	$(filter-out _all sub-make,$(MAKECMDGOALS))
+
+# Leave processing to above invocation of make
+skip-makefile := 1
+endif # ifneq ($(KBUILD_OUTPUT),)
+endif # ifeq ($(KBUILD_SRC),)
+
+# We process the rest of the Makefile if this is the final invocation of make
+ifeq ($(skip-makefile),)
+
+# If building an external module we do not care about the all: rule
+# but instead _all depend on modules
+PHONY += all
+ifeq ($(KBUILD_EXTMOD),)
+_all: all
+else
+_all: modules
+endif
+
+srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
+objtree		:= $(CURDIR)
+src		:= $(srctree)
+obj		:= $(objtree)
+
+VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
+
+export srctree objtree VPATH
+
+
+# SUBARCH tells the usermode build what the underlying arch is.  That is set
+# first, and if a usermode build is happening, the "ARCH=um" on the command
+# line overrides the setting of ARCH below.  If a native build is happening,
+# then ARCH is assigned, getting whatever value it gets normally, and 
+# SUBARCH is subsequently ignored.
+
+SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
+				  -e s/arm.*/arm/ -e s/sa110/arm/ \
+				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
+				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+				  -e s/sh[234].*/sh/ )
+
+# Cross compiling and selecting different set of gcc/bin-utils
+# ---------------------------------------------------------------------------
+#
+# When performing cross compilation for other architectures ARCH shall be set
+# to the target architecture. (See arch/* for the possibilities).
+# ARCH can be set during invocation of make:
+# make ARCH=ia64
+# Another way is to have ARCH set in the environment.
+# The default ARCH is the host where make is executed.
+
+# CROSS_COMPILE specify the prefix used for all executables used
+# during compilation. Only gcc and related bin-utils executables
+# are prefixed with $(CROSS_COMPILE).
+# CROSS_COMPILE can be set on the command line
+# make CROSS_COMPILE=ia64-linux-
+# Alternatively CROSS_COMPILE can be set in the environment.
+# A third alternative is to store a setting in .config so that plain
+# "make" in the configured kernel build directory always uses that.
+# Default value for CROSS_COMPILE is not to prefix executables
+# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
+export KBUILD_BUILDHOST := $(SUBARCH)
+ARCH		?= $(SUBARCH)
+CROSS_COMPILE	?= $(CONFIG_CROSS_COMPILE:"%"=%)
+
+# Architecture as present in compile.h
+UTS_MACHINE 	:= $(ARCH)
+SRCARCH 	:= $(ARCH)
+
+# Additional ARCH settings for x86
+ifeq ($(ARCH),i386)
+        SRCARCH := x86
+endif
+ifeq ($(ARCH),x86_64)
+        SRCARCH := x86
+endif
+
+# Additional ARCH settings for sparc
+ifeq ($(ARCH),sparc32)
+       SRCARCH := sparc
+endif
+ifeq ($(ARCH),sparc64)
+       SRCARCH := sparc
+endif
+
+# Additional ARCH settings for sh
+ifeq ($(ARCH),sh64)
+       SRCARCH := sh
+endif
+
+# Additional ARCH settings for tile
+ifeq ($(ARCH),tilepro)
+       SRCARCH := tile
+endif
+ifeq ($(ARCH),tilegx)
+       SRCARCH := tile
+endif
+
+# Where to locate arch specific headers
+hdr-arch  := $(SRCARCH)
+
+ifeq ($(ARCH),m68knommu)
+       hdr-arch  := m68k
+endif
+
+KCONFIG_CONFIG	?= .config
+export KCONFIG_CONFIG
+
+# SHELL used by kbuild
+CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+	  else if [ -x /bin/bash ]; then echo /bin/bash; \
+	  else echo sh; fi ; fi)
+
+HOSTCC       = gcc
+HOSTCXX      = g++
+HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCXXFLAGS = -O2
+
+# Decide whether to build built-in, modular, or both.
+# Normally, just do built-in.
+
+KBUILD_MODULES :=
+KBUILD_BUILTIN := 1
+
+#	If we have only "make modules", don't compile built-in objects.
+#	When we're building modules with modversions, we need to consider
+#	the built-in objects during the descend as well, in order to
+#	make sure the checksums are up to date before we record them.
+
+ifeq ($(MAKECMDGOALS),modules)
+  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
+endif
+
+#	If we have "make <whatever> modules", compile modules
+#	in addition to whatever we do anyway.
+#	Just "make" or "make all" shall build modules as well
+
+ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
+  KBUILD_MODULES := 1
+endif
+
+ifeq ($(MAKECMDGOALS),)
+  KBUILD_MODULES := 1
+endif
+
+export KBUILD_MODULES KBUILD_BUILTIN
+export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
+
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+#         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+#         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed. 
+# If it is set to "silent_", nothing will be printed at all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+#	$(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+
+ifeq ($(KBUILD_VERBOSE),1)
+  quiet =
+  Q =
+else
+  quiet=quiet_
+  Q = @
+endif
+
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
+
+ifneq ($(findstring s,$(MAKEFLAGS)),)
+  quiet=silent_
+endif
+
+export quiet Q KBUILD_VERBOSE
+
+
+# Look for make include files relative to root of kernel src
+MAKEFLAGS += --include-dir=$(srctree)
+
+# We need some generic definitions (do not try to remake the file).
+$(srctree)/scripts/Kbuild.include: ;
+include $(srctree)/scripts/Kbuild.include
+
+# Make variables (CC, etc...)
+
+AS		= $(CROSS_COMPILE)as
+LD		= $(CROSS_COMPILE)ld
+CC		= $(CROSS_COMPILE)gcc
+CPP		= $(CC) -E
+AR		= $(CROSS_COMPILE)ar
+NM		= $(CROSS_COMPILE)nm
+STRIP		= $(CROSS_COMPILE)strip
+OBJCOPY		= $(CROSS_COMPILE)objcopy
+OBJDUMP		= $(CROSS_COMPILE)objdump
+AWK		= awk
+GENKSYMS	= scripts/genksyms/genksyms
+INSTALLKERNEL  := installkernel
+DEPMOD		= /sbin/depmod
+KALLSYMS	= scripts/kallsyms
+PERL		= perl
+CHECK		= sparse
+
+CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
+		  -Wbitwise -Wno-return-void $(CF)
+CFLAGS_MODULE   =
+AFLAGS_MODULE   =
+LDFLAGS_MODULE  =
+CFLAGS_KERNEL	=
+AFLAGS_KERNEL	=
+CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage
+
+# Prefer linux-backports-modules
+ifneq ($(KBUILD_SRC),)
+ifneq ($(shell if test -e $(KBUILD_OUTPUT)/ubuntu-build; then echo yes; fi),yes)
+UBUNTUINCLUDE := -I/usr/src/linux-headers-lbm-$(KERNELRELEASE)
+endif
+endif
+
+# Use LINUXINCLUDE when you must reference the include/ directory.
+# Needed to be compatible with the O= option
+LINUXINCLUDE    := $(UBUNTUINCLUDE) -I$(srctree)/arch/$(hdr-arch)/include \
+                   -Iarch/$(hdr-arch)/include/generated -Iinclude \
+                   $(if $(KBUILD_SRC), -I$(srctree)/include) \
+                   -include $(srctree)/include/linux/kconfig.h
+
+# UBUNTU: Include our third party driver stuff too
+LINUXINCLUDE   += -Iubuntu/include $(if $(KBUILD_SRC),-I$(srctree)/ubuntu/include)
+
+KBUILD_CPPFLAGS := -D__KERNEL__ -D__linux_kernel__
+
+KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
+		   -fno-strict-aliasing -fno-common \
+		   -Werror-implicit-function-declaration \
+		   -Wno-format-security \
+		   -fno-delete-null-pointer-checks
+KBUILD_AFLAGS_KERNEL :=
+KBUILD_CFLAGS_KERNEL :=
+KBUILD_AFLAGS   := -D__ASSEMBLY__
+KBUILD_AFLAGS_MODULE  := -DMODULE
+KBUILD_CFLAGS_MODULE  := -DMODULE
+KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
+
+# Read KERNELRELEASE from include/config/kernel.release (if it exists)
+KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
+
+export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
+export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
+export CPP AR NM STRIP OBJCOPY OBJDUMP
+export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
+export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
+
+export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
+export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
+export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
+export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
+export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
+export KBUILD_ARFLAGS
+
+# When compiling out-of-tree modules, put MODVERDIR in the module
+# tree rather than in the kernel tree. The kernel tree might
+# even be read-only.
+export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
+
+# Files to ignore in find ... statements
+
+RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
+
+# ===========================================================================
+# Rules shared between *config targets and build targets
+
+# Basic helpers built in scripts/
+PHONY += scripts_basic
+scripts_basic:
+	$(Q)$(MAKE) $(build)=scripts/basic
+	$(Q)rm -f .tmp_quiet_recordmcount
+
+# To avoid any implicit rule to kick in, define an empty command.
+scripts/basic/%: scripts_basic ;
+
+PHONY += outputmakefile
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
+outputmakefile:
+ifneq ($(KBUILD_SRC),)
+	$(Q)ln -fsn $(srctree) source
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
+	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
+endif
+
+# Support for using generic headers in asm-generic
+PHONY += asm-generic
+asm-generic:
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
+	            obj=arch/$(SRCARCH)/include/generated/asm
+
+# To make sure we do not include .config for any of the *config targets
+# catch them early, and hand them over to scripts/kconfig/Makefile
+# It is allowed to specify more targets when calling make, including
+# mixing *config targets and build targets.
+# For example 'make oldconfig all'.
+# Detect when mixed targets is specified, and make a second invocation
+# of make so .config is not included in this case either (for *config).
+
+no-dot-config-targets := clean mrproper distclean \
+			 cscope gtags TAGS tags help %docs check% coccicheck \
+			 include/linux/version.h headers_% \
+			 kernelversion %src-pkg
+
+config-targets := 0
+mixed-targets  := 0
+dot-config     := 1
+
+ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
+	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
+		dot-config := 0
+	endif
+endif
+
+ifeq ($(KBUILD_EXTMOD),)
+        ifneq ($(filter config %config,$(MAKECMDGOALS)),)
+                config-targets := 1
+                ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
+                        mixed-targets := 1
+                endif
+        endif
+endif
+
+ifeq ($(mixed-targets),1)
+# ===========================================================================
+# We're called with mixed targets (*config and build targets).
+# Handle them one by one.
+
+%:: FORCE
+	$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
+
+else
+ifeq ($(config-targets),1)
+# ===========================================================================
+# *config targets only - make sure prerequisites are updated, and descend
+# in scripts/kconfig to make the *config target
+
+# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
+# KBUILD_DEFCONFIG may point out an alternative default configuration
+# used for 'make defconfig'
+include $(srctree)/arch/$(SRCARCH)/Makefile
+export KBUILD_DEFCONFIG KBUILD_KCONFIG
+
+config: scripts_basic outputmakefile FORCE
+	$(Q)mkdir -p include/linux include/config
+	$(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+%config: scripts_basic outputmakefile FORCE
+	$(Q)mkdir -p include/linux include/config
+	$(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+else
+# ===========================================================================
+# Build targets only - this includes vmlinux, arch specific targets, clean
+# targets and others. In general all targets except *config targets.
+
+ifeq ($(KBUILD_EXTMOD),)
+# Additional helpers built in scripts/
+# Carefully list dependencies so we do not try to build scripts twice
+# in parallel
+PHONY += scripts
+scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
+	$(Q)$(MAKE) $(build)=$(@)
+
+# Objects we will link into vmlinux / subdirs we need to visit
+init-y		:= init/
+drivers-y	:= drivers/ sound/ firmware/ ubuntu/
+net-y		:= net/
+libs-y		:= lib/
+core-y		:= usr/
+endif # KBUILD_EXTMOD
+
+ifeq ($(dot-config),1)
+# Read in config
+-include include/config/auto.conf
+
+ifeq ($(KBUILD_EXTMOD),)
+# Read in dependencies to all Kconfig* files, make sure to run
+# oldconfig if changes are detected.
+-include include/config/auto.conf.cmd
+
+# To avoid any implicit rule to kick in, define an empty command
+$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
+
+# If .config is newer than include/config/auto.conf, someone tinkered
+# with it and forgot to run make oldconfig.
+# if auto.conf.cmd is missing then we are probably in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
+	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
+else
+# external modules needs include/generated/autoconf.h and include/config/auto.conf
+# but do not care if they are up-to-date. Use auto.conf to trigger the test
+PHONY += include/config/auto.conf
+
+include/config/auto.conf:
+	$(Q)test -e include/generated/autoconf.h -a -e $@ || (		\
+	echo;								\
+	echo "  ERROR: Kernel configuration is invalid.";		\
+	echo "         include/generated/autoconf.h or $@ are missing.";\
+	echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";	\
+	echo;								\
+	/bin/false)
+
+endif # KBUILD_EXTMOD
+
+else
+# Dummy target needed, because used as prerequisite
+include/config/auto.conf: ;
+endif # $(dot-config)
+
+# The all: target is the default when no target is given on the
+# command line.
+# This allow a user to issue only 'make' to build a kernel including modules
+# Defaults to vmlinux, but the arch makefile usually adds further targets
+all: vmlinux
+
+ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+KBUILD_CFLAGS	+= -Os
+else
+KBUILD_CFLAGS	+= -O2
+endif
+
+include $(srctree)/arch/$(SRCARCH)/Makefile
+
+ifneq ($(CONFIG_FRAME_WARN),0)
+KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
+endif
+
+# Force gcc to behave correct even for buggy distributions
+ifndef CONFIG_CC_STACKPROTECTOR
+KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
+endif
+
+# This warning generated too much noise in a regular build.
+# Use make W=1 to enable this warning (see scripts/Makefile.build)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
+ifdef CONFIG_FRAME_POINTER
+KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
+else
+# Some targets (ARM with Thumb2, for example), can't be built with frame
+# pointers.  For those, we don't have FUNCTION_TRACER automatically
+# select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
+# incompatible with -fomit-frame-pointer with current GCC, so we don't use
+# -fomit-frame-pointer with FUNCTION_TRACER.
+ifndef CONFIG_FUNCTION_TRACER
+KBUILD_CFLAGS	+= -fomit-frame-pointer
+endif
+endif
+
+ifdef CONFIG_DEBUG_INFO
+KBUILD_CFLAGS	+= -g
+KBUILD_AFLAGS	+= -gdwarf-2
+endif
+
+ifdef CONFIG_DEBUG_INFO_REDUCED
+KBUILD_CFLAGS 	+= $(call cc-option, -femit-struct-debug-baseonly)
+endif
+
+ifdef CONFIG_FUNCTION_TRACER
+KBUILD_CFLAGS	+= -pg
+ifdef CONFIG_DYNAMIC_FTRACE
+	ifdef CONFIG_HAVE_C_RECORDMCOUNT
+		BUILD_C_RECORDMCOUNT := y
+		export BUILD_C_RECORDMCOUNT
+	endif
+endif
+endif
+
+# We trigger additional mismatches with less inlining
+ifdef CONFIG_DEBUG_SECTION_MISMATCH
+KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
+endif
+
+# arch Makefile may override CC so keep this after arch Makefile is included
+NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+CHECKFLAGS     += $(NOSTDINC_FLAGS)
+
+# warn about C99 declaration after statement
+KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+
+# disable pointer signed / unsigned warnings in gcc 4.0
+KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
+
+# disable invalid "can't wrap" optimizations for signed / pointers
+KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
+
+# conserve stack if available
+KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
+
+# use the deterministic mode of AR if available
+KBUILD_ARFLAGS := $(call ar-option,D)
+
+# check for 'asm goto'
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
+	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
+endif
+
+# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
+# But warn user when we do so
+warn-assign = \
+$(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")
+
+ifneq ($(KCPPFLAGS),)
+        $(call warn-assign,CPPFLAGS)
+        KBUILD_CPPFLAGS += $(KCPPFLAGS)
+endif
+ifneq ($(KAFLAGS),)
+        $(call warn-assign,AFLAGS)
+        KBUILD_AFLAGS += $(KAFLAGS)
+endif
+ifneq ($(KCFLAGS),)
+        $(call warn-assign,CFLAGS)
+        KBUILD_CFLAGS += $(KCFLAGS)
+endif
+
+# Use --build-id when available.
+LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
+			      $(call cc-ldoption, -Wl$(comma)--build-id,))
+KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
+LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
+
+ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
+LDFLAGS_vmlinux	+= $(call ld-option, -X,)
+endif
+
+# Default kernel image to build when no specific target is given.
+# KBUILD_IMAGE may be overruled on the command line or
+# set in the environment
+# Also any assignments in arch/$(ARCH)/Makefile take precedence over
+# this default value
+export KBUILD_IMAGE ?= vmlinux
+
+#
+# INSTALL_PATH specifies where to place the updated kernel and system map
+# images. Default is /boot, but you can set it to other values
+export	INSTALL_PATH ?= /boot
+
+#
+# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
+# relocations required by build roots.  This is not defined in the
+# makefile but the argument can be passed to make if needed.
+#
+
+MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
+export MODLIB
+
+#
+#  INSTALL_MOD_STRIP, if defined, will cause modules to be
+#  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
+#  the default option --strip-debug will be used.  Otherwise,
+#  INSTALL_MOD_STRIP value will be used as the options to the strip command.
+
+ifdef INSTALL_MOD_STRIP
+ifeq ($(INSTALL_MOD_STRIP),1)
+mod_strip_cmd = $(STRIP) --strip-debug
+else
+mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
+endif # INSTALL_MOD_STRIP=1
+else
+mod_strip_cmd = true
+endif # INSTALL_MOD_STRIP
+export mod_strip_cmd
+
+
+ifeq ($(KBUILD_EXTMOD),)
+core-y		+= kernel/ mm/ fs/ ipc/ security/ crypto/ block/
+
+vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
+		     $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
+		     $(net-y) $(net-m) $(libs-y) $(libs-m)))
+
+vmlinux-alldirs	:= $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
+		     $(init-n) $(init-) \
+		     $(core-n) $(core-) $(drivers-n) $(drivers-) \
+		     $(net-n)  $(net-)  $(libs-n)    $(libs-))))
+
+init-y		:= $(patsubst %/, %/built-in.o, $(init-y))
+core-y		:= $(patsubst %/, %/built-in.o, $(core-y))
+drivers-y	:= $(patsubst %/, %/built-in.o, $(drivers-y))
+net-y		:= $(patsubst %/, %/built-in.o, $(net-y))
+libs-y1		:= $(patsubst %/, %/lib.a, $(libs-y))
+libs-y2		:= $(patsubst %/, %/built-in.o, $(libs-y))
+libs-y		:= $(libs-y1) $(libs-y2)
+
+# Build vmlinux
+# ---------------------------------------------------------------------------
+# vmlinux is built from the objects selected by $(vmlinux-init) and
+# $(vmlinux-main). Most are built-in.o files from top-level directories
+# in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
+# Ordering when linking is important, and $(vmlinux-init) must be first.
+#
+# vmlinux
+#   ^
+#   |
+#   +-< $(vmlinux-init)
+#   |   +--< init/version.o + more
+#   |
+#   +--< $(vmlinux-main)
+#   |    +--< driver/built-in.o mm/built-in.o + more
+#   |
+#   +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
+#
+# vmlinux version (uname -v) cannot be updated during normal
+# descending-into-subdirs phase since we do not yet know if we need to
+# update vmlinux.
+# Therefore this step is delayed until just before final link of vmlinux -
+# except in the kallsyms case where it is done just before adding the
+# symbols to the kernel.
+#
+# System.map is generated to document addresses of all kernel symbols
+
+vmlinux-init := $(head-y) $(init-y)
+vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
+vmlinux-all  := $(vmlinux-init) $(vmlinux-main)
+vmlinux-lds  := arch/$(SRCARCH)/kernel/vmlinux.lds
+export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
+
+# Rule to link vmlinux - also used during CONFIG_KALLSYMS
+# May be overridden by arch/$(ARCH)/Makefile
+quiet_cmd_vmlinux__ ?= LD      $@
+      cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
+      -T $(vmlinux-lds) $(vmlinux-init)                          \
+      --start-group $(vmlinux-main) --end-group                  \
+      $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^)
+
+# Generate new vmlinux version
+quiet_cmd_vmlinux_version = GEN     .version
+      cmd_vmlinux_version = set -e;                     \
+	if [ ! -r .version ]; then			\
+	  rm -f .version;				\
+	  echo 1 >.version;				\
+	else						\
+	  mv .version .old_version;			\
+	  expr 0$$(cat .old_version) + 1 >.version;	\
+	fi;						\
+	$(MAKE) $(build)=init
+
+# Generate System.map
+quiet_cmd_sysmap = SYSMAP
+      cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
+
+# Link of vmlinux
+# If CONFIG_KALLSYMS is set .version is already updated
+# Generate System.map and verify that the content is consistent
+# Use + in front of the vmlinux_version rule to silent warning with make -j2
+# First command is ':' to allow us to use + in front of the rule
+define rule_vmlinux__
+	:
+	$(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
+
+	$(call cmd,vmlinux__)
+	$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
+
+	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
+	  echo '  $($(quiet)cmd_sysmap)  System.map' &&)                     \
+	$(cmd_sysmap) $@ System.map;                                         \
+	if [ $$? -ne 0 ]; then                                               \
+		rm -f $@;                                                    \
+		/bin/false;                                                  \
+	fi;
+	$(verify_kallsyms)
+endef
+
+
+ifdef CONFIG_KALLSYMS
+# Generate section listing all symbols and add it into vmlinux $(kallsyms.o)
+# It's a three stage process:
+# o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
+#   empty
+#   Running kallsyms on that gives us .tmp_kallsyms1.o with
+#   the right size - vmlinux version (uname -v) is updated during this step
+# o .tmp_vmlinux2 now has a __kallsyms section of the right size,
+#   but due to the added section, some addresses have shifted.
+#   From here, we generate a correct .tmp_kallsyms2.o
+# o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
+# o Verify that the System.map from vmlinux matches the map from
+#   .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
+# o If 'make KALLSYMS_EXTRA_PASS=1" was used, do an extra pass using
+#   .tmp_vmlinux3 and .tmp_kallsyms3.o.  This is only meant as a
+#   temporary bypass to allow the kernel to be built while the
+#   maintainers work out what went wrong with kallsyms.
+
+last_kallsyms := 2
+
+ifdef KALLSYMS_EXTRA_PASS
+ifneq ($(KALLSYMS_EXTRA_PASS),0)
+last_kallsyms := 3
+endif
+endif
+
+kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
+
+define verify_kallsyms
+	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
+	  echo '  $($(quiet)cmd_sysmap)  .tmp_System.map' &&)                \
+	  $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
+	$(Q)cmp -s System.map .tmp_System.map ||                             \
+		(echo Inconsistent kallsyms data;                            \
+		 echo This is a bug - please report about it;                \
+		 echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround;      \
+		 rm .tmp_kallsyms* ; /bin/false )
+endef
+
+# Update vmlinux version before link
+# Use + in front of this rule to silent warning about make -j1
+# First command is ':' to allow us to use + in front of this rule
+cmd_ksym_ld = $(cmd_vmlinux__)
+define rule_ksym_ld
+	: 
+	+$(call cmd,vmlinux_version)
+	$(call cmd,vmlinux__)
+	$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
+endef
+
+# Generate .S file with all kernel symbols
+quiet_cmd_kallsyms = KSYM    $@
+      cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
+                     $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
+
+.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
+	$(call if_changed_dep,as_o_S)
+
+.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
+	$(call cmd,kallsyms)
+
+# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
+.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
+	$(call if_changed_rule,ksym_ld)
+
+.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
+	$(call if_changed,vmlinux__)
+
+.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
+	$(call if_changed,vmlinux__)
+
+# Needs to visit scripts/ before $(KALLSYMS) can be used.
+$(KALLSYMS): scripts ;
+
+# Generate some data for debugging strange kallsyms problems
+debug_kallsyms: .tmp_map$(last_kallsyms)
+
+.tmp_map%: .tmp_vmlinux% FORCE
+	($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
+
+.tmp_map3: .tmp_map2
+
+.tmp_map2: .tmp_map1
+
+endif # ifdef CONFIG_KALLSYMS
+
+# Do modpost on a prelinked vmlinux. The finally linked vmlinux has
+# relevant sections renamed as per the linker script.
+quiet_cmd_vmlinux-modpost = LD      $@
+      cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@                          \
+	 $(vmlinux-init) --start-group $(vmlinux-main) --end-group             \
+	 $(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
+define rule_vmlinux-modpost
+	:
+	+$(call cmd,vmlinux-modpost)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
+	$(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd
+endef
+
+# vmlinux image - including updated kernel symbols
+vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o $(kallsyms.o) FORCE
+ifdef CONFIG_HEADERS_CHECK
+	$(Q)$(MAKE) -f $(srctree)/Makefile headers_check
+endif
+ifdef CONFIG_SAMPLES
+	$(Q)$(MAKE) $(build)=samples
+endif
+ifdef CONFIG_BUILD_DOCSRC
+	$(Q)$(MAKE) $(build)=Documentation
+endif
+	$(call vmlinux-modpost)
+	$(call if_changed_rule,vmlinux__)
+	$(Q)rm -f .old_version
+
+# build vmlinux.o first to catch section mismatch errors early
+ifdef CONFIG_KALLSYMS
+.tmp_vmlinux1: vmlinux.o
+endif
+
+modpost-init := $(filter-out init/built-in.o, $(vmlinux-init))
+vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE
+	$(call if_changed_rule,vmlinux-modpost)
+
+# The actual objects are generated when descending, 
+# make sure no implicit rule kicks in
+$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
+
+# Handle descending into subdirectories listed in $(vmlinux-dirs)
+# Preset locale variables to speed up the build process. Limit locale
+# tweaks to this spot to avoid wrong language settings when running
+# make menuconfig etc.
+# Error messages still appears in the original language
+
+PHONY += $(vmlinux-dirs)
+$(vmlinux-dirs): prepare scripts
+	$(Q)$(MAKE) $(build)=$@
+
+# Store (new) KERNELRELASE string in include/config/kernel.release
+include/config/kernel.release: include/config/auto.conf FORCE
+	$(Q)rm -f $@
+	$(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
+
+
+# Things we need to do before we recursively start building the kernel
+# or the modules are listed in "prepare".
+# A multi level approach is used. prepareN is processed before prepareN-1.
+# archprepare is used in arch Makefiles and when processed asm symlink,
+# version.h and scripts_basic is processed / created.
+
+# Listed in dependency order
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
+
+# prepare3 is used to check if we are building in a separate output directory,
+# and if so do:
+# 1) Check that make has not been executed in the kernel src $(srctree)
+prepare3: include/config/kernel.release
+ifneq ($(KBUILD_SRC),)
+	@$(kecho) '  Using $(srctree) as source for kernel'
+	$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
+		echo "  $(srctree) is not clean, please run 'make mrproper'";\
+		echo "  in the '$(srctree)' directory.";\
+		/bin/false; \
+	fi;
+endif
+
+# prepare2 creates a makefile if using a separate output directory
+prepare2: prepare3 outputmakefile asm-generic
+
+prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
+                   include/config/auto.conf
+	$(cmd_crmodverdir)
+
+archprepare: prepare1 scripts_basic
+
+prepare0: archprepare FORCE
+	$(Q)$(MAKE) $(build)=.
+	$(Q)$(MAKE) $(build)=. missing-syscalls
+
+# All the preparing..
+prepare: prepare0
+
+# Generate some files
+# ---------------------------------------------------------------------------
+
+# KERNELRELEASE can change from a few different places, meaning version.h
+# needs to be updated, so this check is forced on all builds
+
+uts_len := 64
+define filechk_utsrelease.h
+	if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
+	  echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
+	  exit 1;                                                         \
+	fi;                                                               \
+	(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
+endef
+
+define filechk_version.h
+	(echo \#define LINUX_VERSION_CODE $(shell                             \
+	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL));    \
+	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
+endef
+
+include/linux/version.h: $(srctree)/Makefile FORCE
+	$(call filechk,version.h)
+
+include/generated/utsrelease.h: include/config/kernel.release FORCE
+	$(call filechk,utsrelease.h)
+
+PHONY += headerdep
+headerdep:
+	$(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
+	$(srctree)/scripts/headerdep.pl -I$(srctree)/include
+
+# ---------------------------------------------------------------------------
+
+PHONY += depend dep
+depend dep:
+	@echo '*** Warning: make $@ is unnecessary now.'
+
+# ---------------------------------------------------------------------------
+# Firmware install
+INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
+export INSTALL_FW_PATH
+
+PHONY += firmware_install
+firmware_install: FORCE
+	@mkdir -p $(objtree)/firmware
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
+
+# ---------------------------------------------------------------------------
+# Kernel headers
+
+#Default location for installed headers
+export INSTALL_HDR_PATH = $(objtree)/usr
+
+hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+
+# If we do an all arch process set dst to asm-$(hdr-arch)
+hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
+
+PHONY += __headers
+__headers: include/linux/version.h scripts_basic asm-generic FORCE
+	$(Q)$(MAKE) $(build)=scripts build_unifdef
+
+PHONY += headers_install_all
+headers_install_all:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
+
+PHONY += headers_install
+headers_install: __headers
+	$(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \
+	$(error Headers not exportable for the $(SRCARCH) architecture))
+	$(Q)$(MAKE) $(hdr-inst)=include
+	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst)
+
+PHONY += headers_check_all
+headers_check_all: headers_install_all
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
+
+PHONY += headers_check
+headers_check: headers_install
+	$(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
+	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1
+
+# ---------------------------------------------------------------------------
+# Modules
+
+ifdef CONFIG_MODULES
+
+# By default, build modules as well
+
+all: modules
+
+#	Build modules
+#
+#	A module can be listed more than once in obj-m resulting in
+#	duplicate lines in modules.order files.  Those are removed
+#	using awk while concatenating to the final file.
+
+PHONY += modules
+modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
+	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
+	@$(kecho) '  Building modules, stage 2.';
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
+
+modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
+	$(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
+
+%/modules.builtin: include/config/auto.conf
+	$(Q)$(MAKE) $(modbuiltin)=$*
+
+
+# Target to prepare building external modules
+PHONY += modules_prepare
+modules_prepare: prepare scripts
+
+# Target to install modules
+PHONY += modules_install
+modules_install: _modinst_ _modinst_post
+
+PHONY += _modinst_
+_modinst_:
+	@rm -rf $(MODLIB)/kernel
+	@rm -f $(MODLIB)/source
+	@mkdir -p $(MODLIB)/kernel
+	@ln -s $(srctree) $(MODLIB)/source
+	@if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
+		rm -f $(MODLIB)/build ; \
+		ln -s $(objtree) $(MODLIB)/build ; \
+	fi
+	@cp -f $(objtree)/modules.order $(MODLIB)/
+	@cp -f $(objtree)/modules.builtin $(MODLIB)/
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+
+# This depmod is only for convenience to give the initial
+# boot a modules.dep even before / is mounted read-write.  However the
+# boot script depmod is the master version.
+PHONY += _modinst_post
+_modinst_post: _modinst_
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
+	$(call cmd,depmod)
+
+else # CONFIG_MODULES
+
+# Modules not configured
+# ---------------------------------------------------------------------------
+
+modules modules_install: FORCE
+	@echo
+	@echo "The present kernel configuration has modules disabled."
+	@echo "Type 'make config' and enable loadable module support."
+	@echo "Then build a kernel with module support enabled."
+	@echo
+	@exit 1
+
+endif # CONFIG_MODULES
+
+###
+# Cleaning is done on three levels.
+# make clean     Delete most generated files
+#                Leave enough to build external modules
+# make mrproper  Delete the current configuration, and all generated files
+# make distclean Remove editor backup files, patch leftover files and the like
+
+# Directories & files removed with 'make clean'
+CLEAN_DIRS  += $(MODVERDIR)
+CLEAN_FILES +=	vmlinux System.map \
+                .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
+
+# Directories & files removed with 'make mrproper'
+MRPROPER_DIRS  += include/config usr/include include/generated          \
+                  arch/*/include/generated
+MRPROPER_FILES += .config .config.old .version .old_version             \
+                  include/linux/version.h                               \
+		  Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
+
+# clean - Delete most, but leave enough to build external modules
+#
+clean: rm-dirs  := $(CLEAN_DIRS)
+clean: rm-files := $(CLEAN_FILES)
+clean-dirs      := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation)
+
+PHONY += $(clean-dirs) clean archclean
+$(clean-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+clean: archclean
+
+# mrproper - Delete all generated files, including .config
+#
+mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
+mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
+mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
+
+PHONY += $(mrproper-dirs) mrproper archmrproper
+$(mrproper-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
+
+mrproper: clean archmrproper $(mrproper-dirs)
+	$(call cmd,rmdirs)
+	$(call cmd,rmfiles)
+
+# distclean
+#
+PHONY += distclean
+
+distclean: mrproper
+	@find $(srctree) $(RCS_FIND_IGNORE) \
+		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
+		-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
+		-o -name '.*.rej' -o -size 0 \
+		-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
+		-type f -print | xargs rm -f
+
+
+# Packaging of the kernel to various formats
+# ---------------------------------------------------------------------------
+# rpm target kept for backward compatibility
+package-dir	:= $(srctree)/scripts/package
+
+%src-pkg: FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+%pkg: include/config/kernel.release FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+rpm: include/config/kernel.release FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+
+
+# Brief documentation of the typical targets used
+# ---------------------------------------------------------------------------
+
+boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
+boards := $(notdir $(boards))
+board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
+board-dirs := $(sort $(notdir $(board-dirs:/=)))
+
+help:
+	@echo  'Cleaning targets:'
+	@echo  '  clean		  - Remove most generated files but keep the config and'
+	@echo  '                    enough build support to build external modules'
+	@echo  '  mrproper	  - Remove all generated files + config + various backup files'
+	@echo  '  distclean	  - mrproper + remove editor backup and patch files'
+	@echo  ''
+	@echo  'Configuration targets:'
+	@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
+	@echo  ''
+	@echo  'Other generic targets:'
+	@echo  '  all		  - Build all targets marked with [*]'
+	@echo  '* vmlinux	  - Build the bare kernel'
+	@echo  '* modules	  - Build all modules'
+	@echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
+	@echo  '  firmware_install- Install all firmware to INSTALL_FW_PATH'
+	@echo  '                    (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
+	@echo  '  dir/            - Build all files in dir and below'
+	@echo  '  dir/file.[oisS] - Build specified target only'
+	@echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
+	@echo  '                    (requires a recent binutils and recent build (System.map))'
+	@echo  '  dir/file.ko     - Build module including final link'
+	@echo  '  modules_prepare - Set up for building external modules'
+	@echo  '  tags/TAGS	  - Generate tags file for editors'
+	@echo  '  cscope	  - Generate cscope index'
+	@echo  '  gtags           - Generate GNU GLOBAL index'
+	@echo  '  kernelrelease	  - Output the release version string'
+	@echo  '  kernelversion	  - Output the version stored in Makefile'
+	@echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
+	 echo  '                    (default: $(INSTALL_HDR_PATH))'; \
+	 echo  ''
+	@echo  'Static analysers'
+	@echo  '  checkstack      - Generate a list of stack hogs'
+	@echo  '  namespacecheck  - Name space analysis on compiled kernel'
+	@echo  '  versioncheck    - Sanity check on version.h usage'
+	@echo  '  includecheck    - Check for duplicate included header files'
+	@echo  '  export_report   - List the usages of all exported symbols'
+	@echo  '  headers_check   - Sanity check on exported headers'
+	@echo  '  headerdep       - Detect inclusion cycles in headers'
+	@$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
+	@echo  ''
+	@echo  'Kernel packaging:'
+	@$(MAKE) $(build)=$(package-dir) help
+	@echo  ''
+	@echo  'Documentation targets:'
+	@$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
+	@echo  ''
+	@echo  'Architecture specific targets ($(SRCARCH)):'
+	@$(if $(archhelp),$(archhelp),\
+		echo '  No architecture specific help defined for $(SRCARCH)')
+	@echo  ''
+	@$(if $(boards), \
+		$(foreach b, $(boards), \
+		printf "  %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
+		echo '')
+	@$(if $(board-dirs), \
+		$(foreach b, $(board-dirs), \
+		printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
+		printf "  %-16s - Show all of the above\\n" help-boards; \
+		echo '')
+
+	@echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
+	@echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
+	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
+	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
+	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
+	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
+	@echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
+	@echo  '		1: warnings which may be relevant and do not occur too often'
+	@echo  '		2: warnings which occur quite often but may still be relevant'
+	@echo  '		3: more obscure warnings, can most likely be ignored'
+	@echo  '		Multiple levels can be combined with W=12 or W=123'
+	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
+	@echo  ''
+	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
+	@echo  'For further info see the ./README file'
+
+
+help-board-dirs := $(addprefix help-,$(board-dirs))
+
+help-boards: $(help-board-dirs)
+
+boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))
+
+$(help-board-dirs): help-%:
+	@echo  'Architecture specific targets ($(SRCARCH) $*):'
+	@$(if $(boards-per-dir), \
+		$(foreach b, $(boards-per-dir), \
+		printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
+		echo '')
+
+
+# Documentation targets
+# ---------------------------------------------------------------------------
+%docs: scripts_basic FORCE
+	$(Q)$(MAKE) $(build)=scripts build_docproc
+	$(Q)$(MAKE) $(build)=Documentation/DocBook $@
+
+else # KBUILD_EXTMOD
+
+###
+# External module support.
+# When building external modules the kernel used as basis is considered
+# read-only, and no consistency checks are made and the make
+# system is not used on the basis kernel. If updates are required
+# in the basis kernel ordinary make commands (without M=...) must
+# be used.
+#
+# The following are the only valid targets when building external
+# modules.
+# make M=dir clean     Delete all automatically generated files
+# make M=dir modules   Make all modules in specified dir
+# make M=dir	       Same as 'make M=dir modules'
+# make M=dir modules_install
+#                      Install the modules built in the module directory
+#                      Assumes install directory is already created
+
+# We are always building modules
+KBUILD_MODULES := 1
+PHONY += crmodverdir
+crmodverdir:
+	$(cmd_crmodverdir)
+
+PHONY += $(objtree)/Module.symvers
+$(objtree)/Module.symvers:
+	@test -e $(objtree)/Module.symvers || ( \
+	echo; \
+	echo "  WARNING: Symbol version dump $(objtree)/Module.symvers"; \
+	echo "           is missing; modules will have no dependencies and modversions."; \
+	echo )
+
+module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
+PHONY += $(module-dirs) modules
+$(module-dirs): crmodverdir $(objtree)/Module.symvers
+	$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
+
+modules: $(module-dirs)
+	@$(kecho) '  Building modules, stage 2.';
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+PHONY += modules_install
+modules_install: _emodinst_ _emodinst_post
+
+install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
+PHONY += _emodinst_
+_emodinst_:
+	$(Q)mkdir -p $(MODLIB)/$(install-dir)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+
+PHONY += _emodinst_post
+_emodinst_post: _emodinst_
+	$(call cmd,depmod)
+
+clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
+
+PHONY += $(clean-dirs) clean
+$(clean-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+clean:	rm-dirs := $(MODVERDIR)
+clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
+
+help:
+	@echo  '  Building external modules.'
+	@echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
+	@echo  ''
+	@echo  '  modules         - default target, build the module(s)'
+	@echo  '  modules_install - install the module'
+	@echo  '  clean           - remove generated files in module directory only'
+	@echo  ''
+
+# Dummies...
+PHONY += prepare scripts
+prepare: ;
+scripts: ;
+endif # KBUILD_EXTMOD
+
+clean: $(clean-dirs)
+	$(call cmd,rmdirs)
+	$(call cmd,rmfiles)
+	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
+		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
+		-o -name '*.symtypes' -o -name 'modules.order' \
+		-o -name modules.builtin -o -name '.tmp_*.o.*' \
+		-o -name '*.gcno' \) -type f -print | xargs rm -f
+
+# Generate tags for editors
+# ---------------------------------------------------------------------------
+quiet_cmd_tags = GEN     $@
+      cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
+
+tags TAGS cscope gtags: FORCE
+	$(call cmd,tags)
+
+# Scripts to check various things for consistency
+# ---------------------------------------------------------------------------
+
+PHONY += includecheck versioncheck coccicheck namespacecheck export_report
+
+includecheck:
+	find $(srctree)/* $(RCS_FIND_IGNORE) \
+		-name '*.[hcS]' -type f -print | sort \
+		| xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
+
+versioncheck:
+	find $(srctree)/* $(RCS_FIND_IGNORE) \
+		-name '*.[hcS]' -type f -print | sort \
+		| xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
+
+coccicheck:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
+
+namespacecheck:
+	$(PERL) $(srctree)/scripts/namespace.pl
+
+export_report:
+	$(PERL) $(srctree)/scripts/export_report.pl
+
+endif #ifeq ($(config-targets),1)
+endif #ifeq ($(mixed-targets),1)
+
+PHONY += checkstack kernelrelease kernelversion
+
+# UML needs a little special treatment here.  It wants to use the host
+# toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
+# else wants $(ARCH), including people doing cross-builds, which means
+# that $(SUBARCH) doesn't work here.
+ifeq ($(ARCH), um)
+CHECKSTACK_ARCH := $(SUBARCH)
+else
+CHECKSTACK_ARCH := $(ARCH)
+endif
+checkstack:
+	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
+	$(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
+
+kernelrelease:
+	@echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+
+kernelversion:
+	@echo $(KERNELVERSION)
+
+# Single targets
+# ---------------------------------------------------------------------------
+# Single targets are compatible with:
+# - build with mixed source and output
+# - build with separate output dir 'make O=...'
+# - external modules
+#
+#  target-dir => where to store outputfile
+#  build-dir  => directory in kernel source tree to use
+
+ifeq ($(KBUILD_EXTMOD),)
+        build-dir  = $(patsubst %/,%,$(dir $@))
+        target-dir = $(dir $@)
+else
+        zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
+        build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
+        target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
+endif
+
+%.s: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.i: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.lst: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.s: %.S prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.S prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.symtypes: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+
+# Modules
+/: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+	$(build)=$(build-dir)
+%/: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+	$(build)=$(build-dir)
+%.ko: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
+	$(build)=$(build-dir) $(@:.ko=.o)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+# FIXME Should go into a make.lib or something 
+# ===========================================================================
+
+quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
+      cmd_rmdirs = rm -rf $(rm-dirs)
+
+quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
+      cmd_rmfiles = rm -f $(rm-files)
+
+# Run depmod only if we have System.map and depmod is executable
+quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
+      cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
+                   $(KERNELRELEASE)
+
+# Create temporary dir for module support files
+# clean it up only when building all modules
+cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
+                  $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
+
+a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
+	  $(KBUILD_AFLAGS_KERNEL)                              \
+	  $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \
+	  $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
+
+quiet_cmd_as_o_S = AS      $@
+cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<
+
+# read all saved command lines
+
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
+
+ifneq ($(cmd_files),)
+  $(cmd_files): ;	# Do not try to update included dependency files
+  include $(cmd_files)
+endif
+
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
+# Usage:
+# $(Q)$(MAKE) $(clean)=dir
+clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+
+endif	# skip-makefile
+
+PHONY += FORCE
+FORCE:
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable so we can use it in if_changed and friends.
+.PHONY: $(PHONY)
diff --git a/debian.linaro/ci/rr-cache/13732fc78bd4b94f04af9e96cda9d28c4986f4a5/preimage b/debian.linaro/ci/rr-cache/13732fc78bd4b94f04af9e96cda9d28c4986f4a5/preimage
new file mode 100644
index 0000000..fb5f3c0
--- /dev/null
+++ b/debian.linaro/ci/rr-cache/13732fc78bd4b94f04af9e96cda9d28c4986f4a5/preimage
@@ -0,0 +1,1581 @@
+VERSION = 3
+PATCHLEVEL = 1
+SUBLEVEL = 4
+EXTRAVERSION =
+NAME = "Divemaster Edition"
+
+# *DOCUMENTATION*
+# To see a list of typical targets execute "make help"
+# More info can be located in ./README
+# Comments in this file are targeted only to the developer, do not
+# expect to learn how to build the kernel reading this file.
+
+# Do not:
+# o  use make's built-in rules and variables
+#    (this increases performance and avoids hard-to-debug behaviour);
+# o  print "Entering directory ...";
+MAKEFLAGS += -rR --no-print-directory
+
+# Avoid funny character set dependencies
+unexport LC_ALL
+LC_COLLATE=C
+LC_NUMERIC=C
+export LC_COLLATE LC_NUMERIC
+
+# We are using a recursive build, so we need to do a little thinking
+# to get the ordering right.
+#
+# Most importantly: sub-Makefiles should only ever modify files in
+# their own directory. If in some directory we have a dependency on
+# a file in another dir (which doesn't happen often, but it's often
+# unavoidable when linking the built-in.o targets which finally
+# turn into vmlinux), we will call a sub make in that other dir, and
+# after that we are sure that everything which is in that other dir
+# is now up to date.
+#
+# The only cases where we need to modify files which have global
+# effects are thus separated out and done before the recursive
+# descending is started. They are now explicitly listed as the
+# prepare rule.
+
+# To put more focus on warnings, be less verbose as default
+# Use 'make V=1' to see the full commands
+
+ifeq ("$(origin V)", "command line")
+  KBUILD_VERBOSE = $(V)
+endif
+ifndef KBUILD_VERBOSE
+  KBUILD_VERBOSE = 0
+endif
+
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "Documentation/sparse.txt" for more details, including
+# where to get the "sparse" utility.
+
+ifeq ("$(origin C)", "command line")
+  KBUILD_CHECKSRC = $(C)
+endif
+ifndef KBUILD_CHECKSRC
+  KBUILD_CHECKSRC = 0
+endif
+
+# Use make M=dir to specify directory of external module to build
+# Old syntax make ... SUBDIRS=$PWD is still supported
+# Setting the environment variable KBUILD_EXTMOD take precedence
+ifdef SUBDIRS
+  KBUILD_EXTMOD ?= $(SUBDIRS)
+endif
+
+ifeq ("$(origin M)", "command line")
+  KBUILD_EXTMOD := $(M)
+endif
+
+# kbuild supports saving output files in a separate directory.
+# To locate output files in a separate directory two syntaxes are supported.
+# In both cases the working directory must be the root of the kernel src.
+# 1) O=
+# Use "make O=dir/to/store/output/files/"
+#
+# 2) Set KBUILD_OUTPUT
+# Set the environment variable KBUILD_OUTPUT to point to the directory
+# where the output files shall be placed.
+# export KBUILD_OUTPUT=dir/to/store/output/files/
+# make
+#
+# The O= assignment takes precedence over the KBUILD_OUTPUT environment
+# variable.
+
+
+# KBUILD_SRC is set on invocation of make in OBJ directory
+# KBUILD_SRC is not intended to be used by the regular user (for now)
+ifeq ($(KBUILD_SRC),)
+
+# OK, Make called in directory where kernel src resides
+# Do we want to locate output files in a separate directory?
+ifeq ("$(origin O)", "command line")
+  KBUILD_OUTPUT := $(O)
+endif
+
+ifeq ("$(origin W)", "command line")
+  export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
+endif
+
+# That's our default target when none is given on the command line
+PHONY := _all
+_all:
+
+# Cancel implicit rules on top Makefile
+$(CURDIR)/Makefile Makefile: ;
+
+ifneq ($(KBUILD_OUTPUT),)
+# Invoke a second make in the output directory, passing relevant variables
+# check that the output directory actually exists
+saved-output := $(KBUILD_OUTPUT)
+KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
+$(if $(KBUILD_OUTPUT),, \
+     $(error output directory "$(saved-output)" does not exist))
+
+PHONY += $(MAKECMDGOALS) sub-make
+
+$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
+	$(Q)@:
+
+sub-make: FORCE
+	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
+	KBUILD_SRC=$(CURDIR) \
+	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
+	$(filter-out _all sub-make,$(MAKECMDGOALS))
+
+# Leave processing to above invocation of make
+skip-makefile := 1
+endif # ifneq ($(KBUILD_OUTPUT),)
+endif # ifeq ($(KBUILD_SRC),)
+
+# We process the rest of the Makefile if this is the final invocation of make
+ifeq ($(skip-makefile),)
+
+# If building an external module we do not care about the all: rule
+# but instead _all depend on modules
+PHONY += all
+ifeq ($(KBUILD_EXTMOD),)
+_all: all
+else
+_all: modules
+endif
+
+srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
+objtree		:= $(CURDIR)
+src		:= $(srctree)
+obj		:= $(objtree)
+
+VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
+
+export srctree objtree VPATH
+
+
+# SUBARCH tells the usermode build what the underlying arch is.  That is set
+# first, and if a usermode build is happening, the "ARCH=um" on the command
+# line overrides the setting of ARCH below.  If a native build is happening,
+# then ARCH is assigned, getting whatever value it gets normally, and 
+# SUBARCH is subsequently ignored.
+
+SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
+				  -e s/arm.*/arm/ -e s/sa110/arm/ \
+				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
+				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+				  -e s/sh[234].*/sh/ )
+
+# Cross compiling and selecting different set of gcc/bin-utils
+# ---------------------------------------------------------------------------
+#
+# When performing cross compilation for other architectures ARCH shall be set
+# to the target architecture. (See arch/* for the possibilities).
+# ARCH can be set during invocation of make:
+# make ARCH=ia64
+# Another way is to have ARCH set in the environment.
+# The default ARCH is the host where make is executed.
+
+# CROSS_COMPILE specify the prefix used for all executables used
+# during compilation. Only gcc and related bin-utils executables
+# are prefixed with $(CROSS_COMPILE).
+# CROSS_COMPILE can be set on the command line
+# make CROSS_COMPILE=ia64-linux-
+# Alternatively CROSS_COMPILE can be set in the environment.
+# A third alternative is to store a setting in .config so that plain
+# "make" in the configured kernel build directory always uses that.
+# Default value for CROSS_COMPILE is not to prefix executables
+# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
+export KBUILD_BUILDHOST := $(SUBARCH)
+ARCH		?= $(SUBARCH)
+CROSS_COMPILE	?= $(CONFIG_CROSS_COMPILE:"%"=%)
+
+# Architecture as present in compile.h
+UTS_MACHINE 	:= $(ARCH)
+SRCARCH 	:= $(ARCH)
+
+# Additional ARCH settings for x86
+ifeq ($(ARCH),i386)
+        SRCARCH := x86
+endif
+ifeq ($(ARCH),x86_64)
+        SRCARCH := x86
+endif
+
+# Additional ARCH settings for sparc
+ifeq ($(ARCH),sparc32)
+       SRCARCH := sparc
+endif
+ifeq ($(ARCH),sparc64)
+       SRCARCH := sparc
+endif
+
+# Additional ARCH settings for sh
+ifeq ($(ARCH),sh64)
+       SRCARCH := sh
+endif
+
+# Additional ARCH settings for tile
+ifeq ($(ARCH),tilepro)
+       SRCARCH := tile
+endif
+ifeq ($(ARCH),tilegx)
+       SRCARCH := tile
+endif
+
+# Where to locate arch specific headers
+hdr-arch  := $(SRCARCH)
+
+ifeq ($(ARCH),m68knommu)
+       hdr-arch  := m68k
+endif
+
+KCONFIG_CONFIG	?= .config
+export KCONFIG_CONFIG
+
+# SHELL used by kbuild
+CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+	  else if [ -x /bin/bash ]; then echo /bin/bash; \
+	  else echo sh; fi ; fi)
+
+HOSTCC       = gcc
+HOSTCXX      = g++
+HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCXXFLAGS = -O2
+
+# Decide whether to build built-in, modular, or both.
+# Normally, just do built-in.
+
+KBUILD_MODULES :=
+KBUILD_BUILTIN := 1
+
+#	If we have only "make modules", don't compile built-in objects.
+#	When we're building modules with modversions, we need to consider
+#	the built-in objects during the descend as well, in order to
+#	make sure the checksums are up to date before we record them.
+
+ifeq ($(MAKECMDGOALS),modules)
+  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
+endif
+
+#	If we have "make <whatever> modules", compile modules
+#	in addition to whatever we do anyway.
+#	Just "make" or "make all" shall build modules as well
+
+ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
+  KBUILD_MODULES := 1
+endif
+
+ifeq ($(MAKECMDGOALS),)
+  KBUILD_MODULES := 1
+endif
+
+export KBUILD_MODULES KBUILD_BUILTIN
+export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
+
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+#         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+#         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed. 
+# If it is set to "silent_", nothing will be printed at all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+#	$(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+
+ifeq ($(KBUILD_VERBOSE),1)
+  quiet =
+  Q =
+else
+  quiet=quiet_
+  Q = @
+endif
+
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
+
+ifneq ($(findstring s,$(MAKEFLAGS)),)
+  quiet=silent_
+endif
+
+export quiet Q KBUILD_VERBOSE
+
+
+# Look for make include files relative to root of kernel src
+MAKEFLAGS += --include-dir=$(srctree)
+
+# We need some generic definitions (do not try to remake the file).
+$(srctree)/scripts/Kbuild.include: ;
+include $(srctree)/scripts/Kbuild.include
+
+# Make variables (CC, etc...)
+
+AS		= $(CROSS_COMPILE)as
+LD		= $(CROSS_COMPILE)ld
+CC		= $(CROSS_COMPILE)gcc
+CPP		= $(CC) -E
+AR		= $(CROSS_COMPILE)ar
+NM		= $(CROSS_COMPILE)nm
+STRIP		= $(CROSS_COMPILE)strip
+OBJCOPY		= $(CROSS_COMPILE)objcopy
+OBJDUMP		= $(CROSS_COMPILE)objdump
+AWK		= awk
+GENKSYMS	= scripts/genksyms/genksyms
+INSTALLKERNEL  := installkernel
+DEPMOD		= /sbin/depmod
+KALLSYMS	= scripts/kallsyms
+PERL		= perl
+CHECK		= sparse
+
+CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
+		  -Wbitwise -Wno-return-void $(CF)
+CFLAGS_MODULE   =
+AFLAGS_MODULE   =
+LDFLAGS_MODULE  =
+CFLAGS_KERNEL	=
+AFLAGS_KERNEL	=
+CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage
+
+# Prefer linux-backports-modules
+ifneq ($(KBUILD_SRC),)
+ifneq ($(shell if test -e $(KBUILD_OUTPUT)/ubuntu-build; then echo yes; fi),yes)
+UBUNTUINCLUDE := -I/usr/src/linux-headers-lbm-$(KERNELRELEASE)
+endif
+endif
+
+# Use LINUXINCLUDE when you must reference the include/ directory.
+# Needed to be compatible with the O= option
+LINUXINCLUDE    := $(UBUNTUINCLUDE) -I$(srctree)/arch/$(hdr-arch)/include \
+                   -Iarch/$(hdr-arch)/include/generated -Iinclude \
+                   $(if $(KBUILD_SRC), -I$(srctree)/include) \
+                   -include $(srctree)/include/linux/kconfig.h
+
+<<<<<<<
+# UBUNTU: Include our third party driver stuff too
+LINUXINCLUDE   += -Iubuntu/include $(if $(KBUILD_SRC),-I$(srctree)/ubuntu/include)
+
+KBUILD_CPPFLAGS := -D__KERNEL__
+=======
+KBUILD_CPPFLAGS := -D__KERNEL__ -D__linux_kernel__
+>>>>>>>
+
+KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
+		   -fno-strict-aliasing -fno-common \
+		   -Werror-implicit-function-declaration \
+		   -Wno-format-security \
+		   -fno-delete-null-pointer-checks
+KBUILD_AFLAGS_KERNEL :=
+KBUILD_CFLAGS_KERNEL :=
+KBUILD_AFLAGS   := -D__ASSEMBLY__
+KBUILD_AFLAGS_MODULE  := -DMODULE
+KBUILD_CFLAGS_MODULE  := -DMODULE
+KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
+
+# Read KERNELRELEASE from include/config/kernel.release (if it exists)
+KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
+
+export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
+export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
+export CPP AR NM STRIP OBJCOPY OBJDUMP
+export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
+export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
+
+export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
+export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
+export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
+export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
+export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
+export KBUILD_ARFLAGS
+
+# When compiling out-of-tree modules, put MODVERDIR in the module
+# tree rather than in the kernel tree. The kernel tree might
+# even be read-only.
+export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
+
+# Files to ignore in find ... statements
+
+RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
+
+# ===========================================================================
+# Rules shared between *config targets and build targets
+
+# Basic helpers built in scripts/
+PHONY += scripts_basic
+scripts_basic:
+	$(Q)$(MAKE) $(build)=scripts/basic
+	$(Q)rm -f .tmp_quiet_recordmcount
+
+# To avoid any implicit rule to kick in, define an empty command.
+scripts/basic/%: scripts_basic ;
+
+PHONY += outputmakefile
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
+outputmakefile:
+ifneq ($(KBUILD_SRC),)
+	$(Q)ln -fsn $(srctree) source
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
+	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
+endif
+
+# Support for using generic headers in asm-generic
+PHONY += asm-generic
+asm-generic:
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
+	            obj=arch/$(SRCARCH)/include/generated/asm
+
+# To make sure we do not include .config for any of the *config targets
+# catch them early, and hand them over to scripts/kconfig/Makefile
+# It is allowed to specify more targets when calling make, including
+# mixing *config targets and build targets.
+# For example 'make oldconfig all'.
+# Detect when mixed targets is specified, and make a second invocation
+# of make so .config is not included in this case either (for *config).
+
+no-dot-config-targets := clean mrproper distclean \
+			 cscope gtags TAGS tags help %docs check% coccicheck \
+			 include/linux/version.h headers_% \
+			 kernelversion %src-pkg
+
+config-targets := 0
+mixed-targets  := 0
+dot-config     := 1
+
+ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
+	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
+		dot-config := 0
+	endif
+endif
+
+ifeq ($(KBUILD_EXTMOD),)
+        ifneq ($(filter config %config,$(MAKECMDGOALS)),)
+                config-targets := 1
+                ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
+                        mixed-targets := 1
+                endif
+        endif
+endif
+
+ifeq ($(mixed-targets),1)
+# ===========================================================================
+# We're called with mixed targets (*config and build targets).
+# Handle them one by one.
+
+%:: FORCE
+	$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
+
+else
+ifeq ($(config-targets),1)
+# ===========================================================================
+# *config targets only - make sure prerequisites are updated, and descend
+# in scripts/kconfig to make the *config target
+
+# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
+# KBUILD_DEFCONFIG may point out an alternative default configuration
+# used for 'make defconfig'
+include $(srctree)/arch/$(SRCARCH)/Makefile
+export KBUILD_DEFCONFIG KBUILD_KCONFIG
+
+config: scripts_basic outputmakefile FORCE
+	$(Q)mkdir -p include/linux include/config
+	$(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+%config: scripts_basic outputmakefile FORCE
+	$(Q)mkdir -p include/linux include/config
+	$(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+else
+# ===========================================================================
+# Build targets only - this includes vmlinux, arch specific targets, clean
+# targets and others. In general all targets except *config targets.
+
+ifeq ($(KBUILD_EXTMOD),)
+# Additional helpers built in scripts/
+# Carefully list dependencies so we do not try to build scripts twice
+# in parallel
+PHONY += scripts
+scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
+	$(Q)$(MAKE) $(build)=$(@)
+
+# Objects we will link into vmlinux / subdirs we need to visit
+init-y		:= init/
+drivers-y	:= drivers/ sound/ firmware/ ubuntu/
+net-y		:= net/
+libs-y		:= lib/
+core-y		:= usr/
+endif # KBUILD_EXTMOD
+
+ifeq ($(dot-config),1)
+# Read in config
+-include include/config/auto.conf
+
+ifeq ($(KBUILD_EXTMOD),)
+# Read in dependencies to all Kconfig* files, make sure to run
+# oldconfig if changes are detected.
+-include include/config/auto.conf.cmd
+
+# To avoid any implicit rule to kick in, define an empty command
+$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
+
+# If .config is newer than include/config/auto.conf, someone tinkered
+# with it and forgot to run make oldconfig.
+# if auto.conf.cmd is missing then we are probably in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
+	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
+else
+# external modules needs include/generated/autoconf.h and include/config/auto.conf
+# but do not care if they are up-to-date. Use auto.conf to trigger the test
+PHONY += include/config/auto.conf
+
+include/config/auto.conf:
+	$(Q)test -e include/generated/autoconf.h -a -e $@ || (		\
+	echo;								\
+	echo "  ERROR: Kernel configuration is invalid.";		\
+	echo "         include/generated/autoconf.h or $@ are missing.";\
+	echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";	\
+	echo;								\
+	/bin/false)
+
+endif # KBUILD_EXTMOD
+
+else
+# Dummy target needed, because used as prerequisite
+include/config/auto.conf: ;
+endif # $(dot-config)
+
+# The all: target is the default when no target is given on the
+# command line.
+# This allow a user to issue only 'make' to build a kernel including modules
+# Defaults to vmlinux, but the arch makefile usually adds further targets
+all: vmlinux
+
+ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+KBUILD_CFLAGS	+= -Os
+else
+KBUILD_CFLAGS	+= -O2
+endif
+
+include $(srctree)/arch/$(SRCARCH)/Makefile
+
+ifneq ($(CONFIG_FRAME_WARN),0)
+KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
+endif
+
+# Force gcc to behave correct even for buggy distributions
+ifndef CONFIG_CC_STACKPROTECTOR
+KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
+endif
+
+# This warning generated too much noise in a regular build.
+# Use make W=1 to enable this warning (see scripts/Makefile.build)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
+ifdef CONFIG_FRAME_POINTER
+KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
+else
+# Some targets (ARM with Thumb2, for example), can't be built with frame
+# pointers.  For those, we don't have FUNCTION_TRACER automatically
+# select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
+# incompatible with -fomit-frame-pointer with current GCC, so we don't use
+# -fomit-frame-pointer with FUNCTION_TRACER.
+ifndef CONFIG_FUNCTION_TRACER
+KBUILD_CFLAGS	+= -fomit-frame-pointer
+endif
+endif
+
+ifdef CONFIG_DEBUG_INFO
+KBUILD_CFLAGS	+= -g
+KBUILD_AFLAGS	+= -gdwarf-2
+endif
+
+ifdef CONFIG_DEBUG_INFO_REDUCED
+KBUILD_CFLAGS 	+= $(call cc-option, -femit-struct-debug-baseonly)
+endif
+
+ifdef CONFIG_FUNCTION_TRACER
+KBUILD_CFLAGS	+= -pg
+ifdef CONFIG_DYNAMIC_FTRACE
+	ifdef CONFIG_HAVE_C_RECORDMCOUNT
+		BUILD_C_RECORDMCOUNT := y
+		export BUILD_C_RECORDMCOUNT
+	endif
+endif
+endif
+
+# We trigger additional mismatches with less inlining
+ifdef CONFIG_DEBUG_SECTION_MISMATCH
+KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
+endif
+
+# arch Makefile may override CC so keep this after arch Makefile is included
+NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+CHECKFLAGS     += $(NOSTDINC_FLAGS)
+
+# warn about C99 declaration after statement
+KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+
+# disable pointer signed / unsigned warnings in gcc 4.0
+KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
+
+# disable invalid "can't wrap" optimizations for signed / pointers
+KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
+
+# conserve stack if available
+KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
+
+# use the deterministic mode of AR if available
+KBUILD_ARFLAGS := $(call ar-option,D)
+
+# check for 'asm goto'
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
+	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
+endif
+
+# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
+# But warn user when we do so
+warn-assign = \
+$(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")
+
+ifneq ($(KCPPFLAGS),)
+        $(call warn-assign,CPPFLAGS)
+        KBUILD_CPPFLAGS += $(KCPPFLAGS)
+endif
+ifneq ($(KAFLAGS),)
+        $(call warn-assign,AFLAGS)
+        KBUILD_AFLAGS += $(KAFLAGS)
+endif
+ifneq ($(KCFLAGS),)
+        $(call warn-assign,CFLAGS)
+        KBUILD_CFLAGS += $(KCFLAGS)
+endif
+
+# Use --build-id when available.
+LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
+			      $(call cc-ldoption, -Wl$(comma)--build-id,))
+KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
+LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
+
+ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
+LDFLAGS_vmlinux	+= $(call ld-option, -X,)
+endif
+
+# Default kernel image to build when no specific target is given.
+# KBUILD_IMAGE may be overruled on the command line or
+# set in the environment
+# Also any assignments in arch/$(ARCH)/Makefile take precedence over
+# this default value
+export KBUILD_IMAGE ?= vmlinux
+
+#
+# INSTALL_PATH specifies where to place the updated kernel and system map
+# images. Default is /boot, but you can set it to other values
+export	INSTALL_PATH ?= /boot
+
+#
+# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
+# relocations required by build roots.  This is not defined in the
+# makefile but the argument can be passed to make if needed.
+#
+
+MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
+export MODLIB
+
+#
+#  INSTALL_MOD_STRIP, if defined, will cause modules to be
+#  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
+#  the default option --strip-debug will be used.  Otherwise,
+#  INSTALL_MOD_STRIP value will be used as the options to the strip command.
+
+ifdef INSTALL_MOD_STRIP
+ifeq ($(INSTALL_MOD_STRIP),1)
+mod_strip_cmd = $(STRIP) --strip-debug
+else
+mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
+endif # INSTALL_MOD_STRIP=1
+else
+mod_strip_cmd = true
+endif # INSTALL_MOD_STRIP
+export mod_strip_cmd
+
+
+ifeq ($(KBUILD_EXTMOD),)
+core-y		+= kernel/ mm/ fs/ ipc/ security/ crypto/ block/
+
+vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
+		     $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
+		     $(net-y) $(net-m) $(libs-y) $(libs-m)))
+
+vmlinux-alldirs	:= $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
+		     $(init-n) $(init-) \
+		     $(core-n) $(core-) $(drivers-n) $(drivers-) \
+		     $(net-n)  $(net-)  $(libs-n)    $(libs-))))
+
+init-y		:= $(patsubst %/, %/built-in.o, $(init-y))
+core-y		:= $(patsubst %/, %/built-in.o, $(core-y))
+drivers-y	:= $(patsubst %/, %/built-in.o, $(drivers-y))
+net-y		:= $(patsubst %/, %/built-in.o, $(net-y))
+libs-y1		:= $(patsubst %/, %/lib.a, $(libs-y))
+libs-y2		:= $(patsubst %/, %/built-in.o, $(libs-y))
+libs-y		:= $(libs-y1) $(libs-y2)
+
+# Build vmlinux
+# ---------------------------------------------------------------------------
+# vmlinux is built from the objects selected by $(vmlinux-init) and
+# $(vmlinux-main). Most are built-in.o files from top-level directories
+# in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
+# Ordering when linking is important, and $(vmlinux-init) must be first.
+#
+# vmlinux
+#   ^
+#   |
+#   +-< $(vmlinux-init)
+#   |   +--< init/version.o + more
+#   |
+#   +--< $(vmlinux-main)
+#   |    +--< driver/built-in.o mm/built-in.o + more
+#   |
+#   +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
+#
+# vmlinux version (uname -v) cannot be updated during normal
+# descending-into-subdirs phase since we do not yet know if we need to
+# update vmlinux.
+# Therefore this step is delayed until just before final link of vmlinux -
+# except in the kallsyms case where it is done just before adding the
+# symbols to the kernel.
+#
+# System.map is generated to document addresses of all kernel symbols
+
+vmlinux-init := $(head-y) $(init-y)
+vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
+vmlinux-all  := $(vmlinux-init) $(vmlinux-main)
+vmlinux-lds  := arch/$(SRCARCH)/kernel/vmlinux.lds
+export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
+
+# Rule to link vmlinux - also used during CONFIG_KALLSYMS
+# May be overridden by arch/$(ARCH)/Makefile
+quiet_cmd_vmlinux__ ?= LD      $@
+      cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
+      -T $(vmlinux-lds) $(vmlinux-init)                          \
+      --start-group $(vmlinux-main) --end-group                  \
+      $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^)
+
+# Generate new vmlinux version
+quiet_cmd_vmlinux_version = GEN     .version
+      cmd_vmlinux_version = set -e;                     \
+	if [ ! -r .version ]; then			\
+	  rm -f .version;				\
+	  echo 1 >.version;				\
+	else						\
+	  mv .version .old_version;			\
+	  expr 0$$(cat .old_version) + 1 >.version;	\
+	fi;						\
+	$(MAKE) $(build)=init
+
+# Generate System.map
+quiet_cmd_sysmap = SYSMAP
+      cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
+
+# Link of vmlinux
+# If CONFIG_KALLSYMS is set .version is already updated
+# Generate System.map and verify that the content is consistent
+# Use + in front of the vmlinux_version rule to silent warning with make -j2
+# First command is ':' to allow us to use + in front of the rule
+define rule_vmlinux__
+	:
+	$(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
+
+	$(call cmd,vmlinux__)
+	$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
+
+	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
+	  echo '  $($(quiet)cmd_sysmap)  System.map' &&)                     \
+	$(cmd_sysmap) $@ System.map;                                         \
+	if [ $$? -ne 0 ]; then                                               \
+		rm -f $@;                                                    \
+		/bin/false;                                                  \
+	fi;
+	$(verify_kallsyms)
+endef
+
+
+ifdef CONFIG_KALLSYMS
+# Generate section listing all symbols and add it into vmlinux $(kallsyms.o)
+# It's a three stage process:
+# o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
+#   empty
+#   Running kallsyms on that gives us .tmp_kallsyms1.o with
+#   the right size - vmlinux version (uname -v) is updated during this step
+# o .tmp_vmlinux2 now has a __kallsyms section of the right size,
+#   but due to the added section, some addresses have shifted.
+#   From here, we generate a correct .tmp_kallsyms2.o
+# o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
+# o Verify that the System.map from vmlinux matches the map from
+#   .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
+# o If 'make KALLSYMS_EXTRA_PASS=1" was used, do an extra pass using
+#   .tmp_vmlinux3 and .tmp_kallsyms3.o.  This is only meant as a
+#   temporary bypass to allow the kernel to be built while the
+#   maintainers work out what went wrong with kallsyms.
+
+last_kallsyms := 2
+
+ifdef KALLSYMS_EXTRA_PASS
+ifneq ($(KALLSYMS_EXTRA_PASS),0)
+last_kallsyms := 3
+endif
+endif
+
+kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
+
+define verify_kallsyms
+	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
+	  echo '  $($(quiet)cmd_sysmap)  .tmp_System.map' &&)                \
+	  $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
+	$(Q)cmp -s System.map .tmp_System.map ||                             \
+		(echo Inconsistent kallsyms data;                            \
+		 echo This is a bug - please report about it;                \
+		 echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround;      \
+		 rm .tmp_kallsyms* ; /bin/false )
+endef
+
+# Update vmlinux version before link
+# Use + in front of this rule to silent warning about make -j1
+# First command is ':' to allow us to use + in front of this rule
+cmd_ksym_ld = $(cmd_vmlinux__)
+define rule_ksym_ld
+	: 
+	+$(call cmd,vmlinux_version)
+	$(call cmd,vmlinux__)
+	$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
+endef
+
+# Generate .S file with all kernel symbols
+quiet_cmd_kallsyms = KSYM    $@
+      cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
+                     $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
+
+.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
+	$(call if_changed_dep,as_o_S)
+
+.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
+	$(call cmd,kallsyms)
+
+# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
+.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
+	$(call if_changed_rule,ksym_ld)
+
+.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
+	$(call if_changed,vmlinux__)
+
+.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
+	$(call if_changed,vmlinux__)
+
+# Needs to visit scripts/ before $(KALLSYMS) can be used.
+$(KALLSYMS): scripts ;
+
+# Generate some data for debugging strange kallsyms problems
+debug_kallsyms: .tmp_map$(last_kallsyms)
+
+.tmp_map%: .tmp_vmlinux% FORCE
+	($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
+
+.tmp_map3: .tmp_map2
+
+.tmp_map2: .tmp_map1
+
+endif # ifdef CONFIG_KALLSYMS
+
+# Do modpost on a prelinked vmlinux. The finally linked vmlinux has
+# relevant sections renamed as per the linker script.
+quiet_cmd_vmlinux-modpost = LD      $@
+      cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@                          \
+	 $(vmlinux-init) --start-group $(vmlinux-main) --end-group             \
+	 $(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
+define rule_vmlinux-modpost
+	:
+	+$(call cmd,vmlinux-modpost)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
+	$(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd
+endef
+
+# vmlinux image - including updated kernel symbols
+vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o $(kallsyms.o) FORCE
+ifdef CONFIG_HEADERS_CHECK
+	$(Q)$(MAKE) -f $(srctree)/Makefile headers_check
+endif
+ifdef CONFIG_SAMPLES
+	$(Q)$(MAKE) $(build)=samples
+endif
+ifdef CONFIG_BUILD_DOCSRC
+	$(Q)$(MAKE) $(build)=Documentation
+endif
+	$(call vmlinux-modpost)
+	$(call if_changed_rule,vmlinux__)
+	$(Q)rm -f .old_version
+
+# build vmlinux.o first to catch section mismatch errors early
+ifdef CONFIG_KALLSYMS
+.tmp_vmlinux1: vmlinux.o
+endif
+
+modpost-init := $(filter-out init/built-in.o, $(vmlinux-init))
+vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE
+	$(call if_changed_rule,vmlinux-modpost)
+
+# The actual objects are generated when descending, 
+# make sure no implicit rule kicks in
+$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
+
+# Handle descending into subdirectories listed in $(vmlinux-dirs)
+# Preset locale variables to speed up the build process. Limit locale
+# tweaks to this spot to avoid wrong language settings when running
+# make menuconfig etc.
+# Error messages still appears in the original language
+
+PHONY += $(vmlinux-dirs)
+$(vmlinux-dirs): prepare scripts
+	$(Q)$(MAKE) $(build)=$@
+
+# Store (new) KERNELRELASE string in include/config/kernel.release
+include/config/kernel.release: include/config/auto.conf FORCE
+	$(Q)rm -f $@
+	$(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
+
+
+# Things we need to do before we recursively start building the kernel
+# or the modules are listed in "prepare".
+# A multi level approach is used. prepareN is processed before prepareN-1.
+# archprepare is used in arch Makefiles and when processed asm symlink,
+# version.h and scripts_basic is processed / created.
+
+# Listed in dependency order
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
+
+# prepare3 is used to check if we are building in a separate output directory,
+# and if so do:
+# 1) Check that make has not been executed in the kernel src $(srctree)
+prepare3: include/config/kernel.release
+ifneq ($(KBUILD_SRC),)
+	@$(kecho) '  Using $(srctree) as source for kernel'
+	$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
+		echo "  $(srctree) is not clean, please run 'make mrproper'";\
+		echo "  in the '$(srctree)' directory.";\
+		/bin/false; \
+	fi;
+endif
+
+# prepare2 creates a makefile if using a separate output directory
+prepare2: prepare3 outputmakefile asm-generic
+
+prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
+                   include/config/auto.conf
+	$(cmd_crmodverdir)
+
+archprepare: prepare1 scripts_basic
+
+prepare0: archprepare FORCE
+	$(Q)$(MAKE) $(build)=.
+	$(Q)$(MAKE) $(build)=. missing-syscalls
+
+# All the preparing..
+prepare: prepare0
+
+# Generate some files
+# ---------------------------------------------------------------------------
+
+# KERNELRELEASE can change from a few different places, meaning version.h
+# needs to be updated, so this check is forced on all builds
+
+uts_len := 64
+define filechk_utsrelease.h
+	if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
+	  echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
+	  exit 1;                                                         \
+	fi;                                                               \
+	(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
+endef
+
+define filechk_version.h
+	(echo \#define LINUX_VERSION_CODE $(shell                             \
+	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL));    \
+	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
+endef
+
+include/linux/version.h: $(srctree)/Makefile FORCE
+	$(call filechk,version.h)
+
+include/generated/utsrelease.h: include/config/kernel.release FORCE
+	$(call filechk,utsrelease.h)
+
+PHONY += headerdep
+headerdep:
+	$(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
+	$(srctree)/scripts/headerdep.pl -I$(srctree)/include
+
+# ---------------------------------------------------------------------------
+
+PHONY += depend dep
+depend dep:
+	@echo '*** Warning: make $@ is unnecessary now.'
+
+# ---------------------------------------------------------------------------
+# Firmware install
+INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
+export INSTALL_FW_PATH
+
+PHONY += firmware_install
+firmware_install: FORCE
+	@mkdir -p $(objtree)/firmware
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
+
+# ---------------------------------------------------------------------------
+# Kernel headers
+
+#Default location for installed headers
+export INSTALL_HDR_PATH = $(objtree)/usr
+
+hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+
+# If we do an all arch process set dst to asm-$(hdr-arch)
+hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
+
+PHONY += __headers
+__headers: include/linux/version.h scripts_basic asm-generic FORCE
+	$(Q)$(MAKE) $(build)=scripts build_unifdef
+
+PHONY += headers_install_all
+headers_install_all:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
+
+PHONY += headers_install
+headers_install: __headers
+	$(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \
+	$(error Headers not exportable for the $(SRCARCH) architecture))
+	$(Q)$(MAKE) $(hdr-inst)=include
+	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst)
+
+PHONY += headers_check_all
+headers_check_all: headers_install_all
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
+
+PHONY += headers_check
+headers_check: headers_install
+	$(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
+	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1
+
+# ---------------------------------------------------------------------------
+# Modules
+
+ifdef CONFIG_MODULES
+
+# By default, build modules as well
+
+all: modules
+
+#	Build modules
+#
+#	A module can be listed more than once in obj-m resulting in
+#	duplicate lines in modules.order files.  Those are removed
+#	using awk while concatenating to the final file.
+
+PHONY += modules
+modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
+	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
+	@$(kecho) '  Building modules, stage 2.';
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
+
+modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
+	$(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
+
+%/modules.builtin: include/config/auto.conf
+	$(Q)$(MAKE) $(modbuiltin)=$*
+
+
+# Target to prepare building external modules
+PHONY += modules_prepare
+modules_prepare: prepare scripts
+
+# Target to install modules
+PHONY += modules_install
+modules_install: _modinst_ _modinst_post
+
+PHONY += _modinst_
+_modinst_:
+	@rm -rf $(MODLIB)/kernel
+	@rm -f $(MODLIB)/source
+	@mkdir -p $(MODLIB)/kernel
+	@ln -s $(srctree) $(MODLIB)/source
+	@if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
+		rm -f $(MODLIB)/build ; \
+		ln -s $(objtree) $(MODLIB)/build ; \
+	fi
+	@cp -f $(objtree)/modules.order $(MODLIB)/
+	@cp -f $(objtree)/modules.builtin $(MODLIB)/
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+
+# This depmod is only for convenience to give the initial
+# boot a modules.dep even before / is mounted read-write.  However the
+# boot script depmod is the master version.
+PHONY += _modinst_post
+_modinst_post: _modinst_
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
+	$(call cmd,depmod)
+
+else # CONFIG_MODULES
+
+# Modules not configured
+# ---------------------------------------------------------------------------
+
+modules modules_install: FORCE
+	@echo
+	@echo "The present kernel configuration has modules disabled."
+	@echo "Type 'make config' and enable loadable module support."
+	@echo "Then build a kernel with module support enabled."
+	@echo
+	@exit 1
+
+endif # CONFIG_MODULES
+
+###
+# Cleaning is done on three levels.
+# make clean     Delete most generated files
+#                Leave enough to build external modules
+# make mrproper  Delete the current configuration, and all generated files
+# make distclean Remove editor backup files, patch leftover files and the like
+
+# Directories & files removed with 'make clean'
+CLEAN_DIRS  += $(MODVERDIR)
+CLEAN_FILES +=	vmlinux System.map \
+                .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
+
+# Directories & files removed with 'make mrproper'
+MRPROPER_DIRS  += include/config usr/include include/generated          \
+                  arch/*/include/generated
+MRPROPER_FILES += .config .config.old .version .old_version             \
+                  include/linux/version.h                               \
+		  Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
+
+# clean - Delete most, but leave enough to build external modules
+#
+clean: rm-dirs  := $(CLEAN_DIRS)
+clean: rm-files := $(CLEAN_FILES)
+clean-dirs      := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation)
+
+PHONY += $(clean-dirs) clean archclean
+$(clean-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+clean: archclean
+
+# mrproper - Delete all generated files, including .config
+#
+mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
+mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
+mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
+
+PHONY += $(mrproper-dirs) mrproper archmrproper
+$(mrproper-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
+
+mrproper: clean archmrproper $(mrproper-dirs)
+	$(call cmd,rmdirs)
+	$(call cmd,rmfiles)
+
+# distclean
+#
+PHONY += distclean
+
+distclean: mrproper
+	@find $(srctree) $(RCS_FIND_IGNORE) \
+		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
+		-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
+		-o -name '.*.rej' -o -size 0 \
+		-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
+		-type f -print | xargs rm -f
+
+
+# Packaging of the kernel to various formats
+# ---------------------------------------------------------------------------
+# rpm target kept for backward compatibility
+package-dir	:= $(srctree)/scripts/package
+
+%src-pkg: FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+%pkg: include/config/kernel.release FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+rpm: include/config/kernel.release FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+
+
+# Brief documentation of the typical targets used
+# ---------------------------------------------------------------------------
+
+boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
+boards := $(notdir $(boards))
+board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
+board-dirs := $(sort $(notdir $(board-dirs:/=)))
+
+help:
+	@echo  'Cleaning targets:'
+	@echo  '  clean		  - Remove most generated files but keep the config and'
+	@echo  '                    enough build support to build external modules'
+	@echo  '  mrproper	  - Remove all generated files + config + various backup files'
+	@echo  '  distclean	  - mrproper + remove editor backup and patch files'
+	@echo  ''
+	@echo  'Configuration targets:'
+	@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
+	@echo  ''
+	@echo  'Other generic targets:'
+	@echo  '  all		  - Build all targets marked with [*]'
+	@echo  '* vmlinux	  - Build the bare kernel'
+	@echo  '* modules	  - Build all modules'
+	@echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
+	@echo  '  firmware_install- Install all firmware to INSTALL_FW_PATH'
+	@echo  '                    (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
+	@echo  '  dir/            - Build all files in dir and below'
+	@echo  '  dir/file.[oisS] - Build specified target only'
+	@echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
+	@echo  '                    (requires a recent binutils and recent build (System.map))'
+	@echo  '  dir/file.ko     - Build module including final link'
+	@echo  '  modules_prepare - Set up for building external modules'
+	@echo  '  tags/TAGS	  - Generate tags file for editors'
+	@echo  '  cscope	  - Generate cscope index'
+	@echo  '  gtags           - Generate GNU GLOBAL index'
+	@echo  '  kernelrelease	  - Output the release version string'
+	@echo  '  kernelversion	  - Output the version stored in Makefile'
+	@echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
+	 echo  '                    (default: $(INSTALL_HDR_PATH))'; \
+	 echo  ''
+	@echo  'Static analysers'
+	@echo  '  checkstack      - Generate a list of stack hogs'
+	@echo  '  namespacecheck  - Name space analysis on compiled kernel'
+	@echo  '  versioncheck    - Sanity check on version.h usage'
+	@echo  '  includecheck    - Check for duplicate included header files'
+	@echo  '  export_report   - List the usages of all exported symbols'
+	@echo  '  headers_check   - Sanity check on exported headers'
+	@echo  '  headerdep       - Detect inclusion cycles in headers'
+	@$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
+	@echo  ''
+	@echo  'Kernel packaging:'
+	@$(MAKE) $(build)=$(package-dir) help
+	@echo  ''
+	@echo  'Documentation targets:'
+	@$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
+	@echo  ''
+	@echo  'Architecture specific targets ($(SRCARCH)):'
+	@$(if $(archhelp),$(archhelp),\
+		echo '  No architecture specific help defined for $(SRCARCH)')
+	@echo  ''
+	@$(if $(boards), \
+		$(foreach b, $(boards), \
+		printf "  %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
+		echo '')
+	@$(if $(board-dirs), \
+		$(foreach b, $(board-dirs), \
+		printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
+		printf "  %-16s - Show all of the above\\n" help-boards; \
+		echo '')
+
+	@echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
+	@echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
+	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
+	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
+	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
+	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
+	@echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
+	@echo  '		1: warnings which may be relevant and do not occur too often'
+	@echo  '		2: warnings which occur quite often but may still be relevant'
+	@echo  '		3: more obscure warnings, can most likely be ignored'
+	@echo  '		Multiple levels can be combined with W=12 or W=123'
+	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
+	@echo  ''
+	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
+	@echo  'For further info see the ./README file'
+
+
+help-board-dirs := $(addprefix help-,$(board-dirs))
+
+help-boards: $(help-board-dirs)
+
+boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))
+
+$(help-board-dirs): help-%:
+	@echo  'Architecture specific targets ($(SRCARCH) $*):'
+	@$(if $(boards-per-dir), \
+		$(foreach b, $(boards-per-dir), \
+		printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
+		echo '')
+
+
+# Documentation targets
+# ---------------------------------------------------------------------------
+%docs: scripts_basic FORCE
+	$(Q)$(MAKE) $(build)=scripts build_docproc
+	$(Q)$(MAKE) $(build)=Documentation/DocBook $@
+
+else # KBUILD_EXTMOD
+
+###
+# External module support.
+# When building external modules the kernel used as basis is considered
+# read-only, and no consistency checks are made and the make
+# system is not used on the basis kernel. If updates are required
+# in the basis kernel ordinary make commands (without M=...) must
+# be used.
+#
+# The following are the only valid targets when building external
+# modules.
+# make M=dir clean     Delete all automatically generated files
+# make M=dir modules   Make all modules in specified dir
+# make M=dir	       Same as 'make M=dir modules'
+# make M=dir modules_install
+#                      Install the modules built in the module directory
+#                      Assumes install directory is already created
+
+# We are always building modules
+KBUILD_MODULES := 1
+PHONY += crmodverdir
+crmodverdir:
+	$(cmd_crmodverdir)
+
+PHONY += $(objtree)/Module.symvers
+$(objtree)/Module.symvers:
+	@test -e $(objtree)/Module.symvers || ( \
+	echo; \
+	echo "  WARNING: Symbol version dump $(objtree)/Module.symvers"; \
+	echo "           is missing; modules will have no dependencies and modversions."; \
+	echo )
+
+module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
+PHONY += $(module-dirs) modules
+$(module-dirs): crmodverdir $(objtree)/Module.symvers
+	$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
+
+modules: $(module-dirs)
+	@$(kecho) '  Building modules, stage 2.';
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+PHONY += modules_install
+modules_install: _emodinst_ _emodinst_post
+
+install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
+PHONY += _emodinst_
+_emodinst_:
+	$(Q)mkdir -p $(MODLIB)/$(install-dir)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+
+PHONY += _emodinst_post
+_emodinst_post: _emodinst_
+	$(call cmd,depmod)
+
+clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
+
+PHONY += $(clean-dirs) clean
+$(clean-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+clean:	rm-dirs := $(MODVERDIR)
+clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
+
+help:
+	@echo  '  Building external modules.'
+	@echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
+	@echo  ''
+	@echo  '  modules         - default target, build the module(s)'
+	@echo  '  modules_install - install the module'
+	@echo  '  clean           - remove generated files in module directory only'
+	@echo  ''
+
+# Dummies...
+PHONY += prepare scripts
+prepare: ;
+scripts: ;
+endif # KBUILD_EXTMOD
+
+clean: $(clean-dirs)
+	$(call cmd,rmdirs)
+	$(call cmd,rmfiles)
+	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
+		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
+		-o -name '*.symtypes' -o -name 'modules.order' \
+		-o -name modules.builtin -o -name '.tmp_*.o.*' \
+		-o -name '*.gcno' \) -type f -print | xargs rm -f
+
+# Generate tags for editors
+# ---------------------------------------------------------------------------
+quiet_cmd_tags = GEN     $@
+      cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
+
+tags TAGS cscope gtags: FORCE
+	$(call cmd,tags)
+
+# Scripts to check various things for consistency
+# ---------------------------------------------------------------------------
+
+PHONY += includecheck versioncheck coccicheck namespacecheck export_report
+
+includecheck:
+	find $(srctree)/* $(RCS_FIND_IGNORE) \
+		-name '*.[hcS]' -type f -print | sort \
+		| xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
+
+versioncheck:
+	find $(srctree)/* $(RCS_FIND_IGNORE) \
+		-name '*.[hcS]' -type f -print | sort \
+		| xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
+
+coccicheck:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
+
+namespacecheck:
+	$(PERL) $(srctree)/scripts/namespace.pl
+
+export_report:
+	$(PERL) $(srctree)/scripts/export_report.pl
+
+endif #ifeq ($(config-targets),1)
+endif #ifeq ($(mixed-targets),1)
+
+PHONY += checkstack kernelrelease kernelversion
+
+# UML needs a little special treatment here.  It wants to use the host
+# toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
+# else wants $(ARCH), including people doing cross-builds, which means
+# that $(SUBARCH) doesn't work here.
+ifeq ($(ARCH), um)
+CHECKSTACK_ARCH := $(SUBARCH)
+else
+CHECKSTACK_ARCH := $(ARCH)
+endif
+checkstack:
+	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
+	$(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
+
+kernelrelease:
+	@echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+
+kernelversion:
+	@echo $(KERNELVERSION)
+
+# Single targets
+# ---------------------------------------------------------------------------
+# Single targets are compatible with:
+# - build with mixed source and output
+# - build with separate output dir 'make O=...'
+# - external modules
+#
+#  target-dir => where to store outputfile
+#  build-dir  => directory in kernel source tree to use
+
+ifeq ($(KBUILD_EXTMOD),)
+        build-dir  = $(patsubst %/,%,$(dir $@))
+        target-dir = $(dir $@)
+else
+        zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
+        build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
+        target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
+endif
+
+%.s: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.i: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.lst: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.s: %.S prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.S prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.symtypes: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+
+# Modules
+/: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+	$(build)=$(build-dir)
+%/: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+	$(build)=$(build-dir)
+%.ko: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
+	$(build)=$(build-dir) $(@:.ko=.o)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+# FIXME Should go into a make.lib or something 
+# ===========================================================================
+
+quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
+      cmd_rmdirs = rm -rf $(rm-dirs)
+
+quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
+      cmd_rmfiles = rm -f $(rm-files)
+
+# Run depmod only if we have System.map and depmod is executable
+quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
+      cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
+                   $(KERNELRELEASE)
+
+# Create temporary dir for module support files
+# clean it up only when building all modules
+cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
+                  $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
+
+a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
+	  $(KBUILD_AFLAGS_KERNEL)                              \
+	  $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \
+	  $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
+
+quiet_cmd_as_o_S = AS      $@
+cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<
+
+# read all saved command lines
+
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
+
+ifneq ($(cmd_files),)
+  $(cmd_files): ;	# Do not try to update included dependency files
+  include $(cmd_files)
+endif
+
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
+# Usage:
+# $(Q)$(MAKE) $(clean)=dir
+clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+
+endif	# skip-makefile
+
+PHONY += FORCE
+FORCE:
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable so we can use it in if_changed and friends.
+.PHONY: $(PHONY)
diff --git a/debian.linaro/ci/rr-cache/13732fc78bd4b94f04af9e96cda9d28c4986f4a5/thisimage b/debian.linaro/ci/rr-cache/13732fc78bd4b94f04af9e96cda9d28c4986f4a5/thisimage
new file mode 100644
index 0000000..fb5f3c0
--- /dev/null
+++ b/debian.linaro/ci/rr-cache/13732fc78bd4b94f04af9e96cda9d28c4986f4a5/thisimage
@@ -0,0 +1,1581 @@
+VERSION = 3
+PATCHLEVEL = 1
+SUBLEVEL = 4
+EXTRAVERSION =
+NAME = "Divemaster Edition"
+
+# *DOCUMENTATION*
+# To see a list of typical targets execute "make help"
+# More info can be located in ./README
+# Comments in this file are targeted only to the developer, do not
+# expect to learn how to build the kernel reading this file.
+
+# Do not:
+# o  use make's built-in rules and variables
+#    (this increases performance and avoids hard-to-debug behaviour);
+# o  print "Entering directory ...";
+MAKEFLAGS += -rR --no-print-directory
+
+# Avoid funny character set dependencies
+unexport LC_ALL
+LC_COLLATE=C
+LC_NUMERIC=C
+export LC_COLLATE LC_NUMERIC
+
+# We are using a recursive build, so we need to do a little thinking
+# to get the ordering right.
+#
+# Most importantly: sub-Makefiles should only ever modify files in
+# their own directory. If in some directory we have a dependency on
+# a file in another dir (which doesn't happen often, but it's often
+# unavoidable when linking the built-in.o targets which finally
+# turn into vmlinux), we will call a sub make in that other dir, and
+# after that we are sure that everything which is in that other dir
+# is now up to date.
+#
+# The only cases where we need to modify files which have global
+# effects are thus separated out and done before the recursive
+# descending is started. They are now explicitly listed as the
+# prepare rule.
+
+# To put more focus on warnings, be less verbose as default
+# Use 'make V=1' to see the full commands
+
+ifeq ("$(origin V)", "command line")
+  KBUILD_VERBOSE = $(V)
+endif
+ifndef KBUILD_VERBOSE
+  KBUILD_VERBOSE = 0
+endif
+
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "Documentation/sparse.txt" for more details, including
+# where to get the "sparse" utility.
+
+ifeq ("$(origin C)", "command line")
+  KBUILD_CHECKSRC = $(C)
+endif
+ifndef KBUILD_CHECKSRC
+  KBUILD_CHECKSRC = 0
+endif
+
+# Use make M=dir to specify directory of external module to build
+# Old syntax make ... SUBDIRS=$PWD is still supported
+# Setting the environment variable KBUILD_EXTMOD take precedence
+ifdef SUBDIRS
+  KBUILD_EXTMOD ?= $(SUBDIRS)
+endif
+
+ifeq ("$(origin M)", "command line")
+  KBUILD_EXTMOD := $(M)
+endif
+
+# kbuild supports saving output files in a separate directory.
+# To locate output files in a separate directory two syntaxes are supported.
+# In both cases the working directory must be the root of the kernel src.
+# 1) O=
+# Use "make O=dir/to/store/output/files/"
+#
+# 2) Set KBUILD_OUTPUT
+# Set the environment variable KBUILD_OUTPUT to point to the directory
+# where the output files shall be placed.
+# export KBUILD_OUTPUT=dir/to/store/output/files/
+# make
+#
+# The O= assignment takes precedence over the KBUILD_OUTPUT environment
+# variable.
+
+
+# KBUILD_SRC is set on invocation of make in OBJ directory
+# KBUILD_SRC is not intended to be used by the regular user (for now)
+ifeq ($(KBUILD_SRC),)
+
+# OK, Make called in directory where kernel src resides
+# Do we want to locate output files in a separate directory?
+ifeq ("$(origin O)", "command line")
+  KBUILD_OUTPUT := $(O)
+endif
+
+ifeq ("$(origin W)", "command line")
+  export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
+endif
+
+# That's our default target when none is given on the command line
+PHONY := _all
+_all:
+
+# Cancel implicit rules on top Makefile
+$(CURDIR)/Makefile Makefile: ;
+
+ifneq ($(KBUILD_OUTPUT),)
+# Invoke a second make in the output directory, passing relevant variables
+# check that the output directory actually exists
+saved-output := $(KBUILD_OUTPUT)
+KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
+$(if $(KBUILD_OUTPUT),, \
+     $(error output directory "$(saved-output)" does not exist))
+
+PHONY += $(MAKECMDGOALS) sub-make
+
+$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
+	$(Q)@:
+
+sub-make: FORCE
+	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
+	KBUILD_SRC=$(CURDIR) \
+	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
+	$(filter-out _all sub-make,$(MAKECMDGOALS))
+
+# Leave processing to above invocation of make
+skip-makefile := 1
+endif # ifneq ($(KBUILD_OUTPUT),)
+endif # ifeq ($(KBUILD_SRC),)
+
+# We process the rest of the Makefile if this is the final invocation of make
+ifeq ($(skip-makefile),)
+
+# If building an external module we do not care about the all: rule
+# but instead _all depend on modules
+PHONY += all
+ifeq ($(KBUILD_EXTMOD),)
+_all: all
+else
+_all: modules
+endif
+
+srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
+objtree		:= $(CURDIR)
+src		:= $(srctree)
+obj		:= $(objtree)
+
+VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
+
+export srctree objtree VPATH
+
+
+# SUBARCH tells the usermode build what the underlying arch is.  That is set
+# first, and if a usermode build is happening, the "ARCH=um" on the command
+# line overrides the setting of ARCH below.  If a native build is happening,
+# then ARCH is assigned, getting whatever value it gets normally, and 
+# SUBARCH is subsequently ignored.
+
+SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
+				  -e s/arm.*/arm/ -e s/sa110/arm/ \
+				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
+				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+				  -e s/sh[234].*/sh/ )
+
+# Cross compiling and selecting different set of gcc/bin-utils
+# ---------------------------------------------------------------------------
+#
+# When performing cross compilation for other architectures ARCH shall be set
+# to the target architecture. (See arch/* for the possibilities).
+# ARCH can be set during invocation of make:
+# make ARCH=ia64
+# Another way is to have ARCH set in the environment.
+# The default ARCH is the host where make is executed.
+
+# CROSS_COMPILE specify the prefix used for all executables used
+# during compilation. Only gcc and related bin-utils executables
+# are prefixed with $(CROSS_COMPILE).
+# CROSS_COMPILE can be set on the command line
+# make CROSS_COMPILE=ia64-linux-
+# Alternatively CROSS_COMPILE can be set in the environment.
+# A third alternative is to store a setting in .config so that plain
+# "make" in the configured kernel build directory always uses that.
+# Default value for CROSS_COMPILE is not to prefix executables
+# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
+export KBUILD_BUILDHOST := $(SUBARCH)
+ARCH		?= $(SUBARCH)
+CROSS_COMPILE	?= $(CONFIG_CROSS_COMPILE:"%"=%)
+
+# Architecture as present in compile.h
+UTS_MACHINE 	:= $(ARCH)
+SRCARCH 	:= $(ARCH)
+
+# Additional ARCH settings for x86
+ifeq ($(ARCH),i386)
+        SRCARCH := x86
+endif
+ifeq ($(ARCH),x86_64)
+        SRCARCH := x86
+endif
+
+# Additional ARCH settings for sparc
+ifeq ($(ARCH),sparc32)
+       SRCARCH := sparc
+endif
+ifeq ($(ARCH),sparc64)
+       SRCARCH := sparc
+endif
+
+# Additional ARCH settings for sh
+ifeq ($(ARCH),sh64)
+       SRCARCH := sh
+endif
+
+# Additional ARCH settings for tile
+ifeq ($(ARCH),tilepro)
+       SRCARCH := tile
+endif
+ifeq ($(ARCH),tilegx)
+       SRCARCH := tile
+endif
+
+# Where to locate arch specific headers
+hdr-arch  := $(SRCARCH)
+
+ifeq ($(ARCH),m68knommu)
+       hdr-arch  := m68k
+endif
+
+KCONFIG_CONFIG	?= .config
+export KCONFIG_CONFIG
+
+# SHELL used by kbuild
+CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+	  else if [ -x /bin/bash ]; then echo /bin/bash; \
+	  else echo sh; fi ; fi)
+
+HOSTCC       = gcc
+HOSTCXX      = g++
+HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCXXFLAGS = -O2
+
+# Decide whether to build built-in, modular, or both.
+# Normally, just do built-in.
+
+KBUILD_MODULES :=
+KBUILD_BUILTIN := 1
+
+#	If we have only "make modules", don't compile built-in objects.
+#	When we're building modules with modversions, we need to consider
+#	the built-in objects during the descend as well, in order to
+#	make sure the checksums are up to date before we record them.
+
+ifeq ($(MAKECMDGOALS),modules)
+  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
+endif
+
+#	If we have "make <whatever> modules", compile modules
+#	in addition to whatever we do anyway.
+#	Just "make" or "make all" shall build modules as well
+
+ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
+  KBUILD_MODULES := 1
+endif
+
+ifeq ($(MAKECMDGOALS),)
+  KBUILD_MODULES := 1
+endif
+
+export KBUILD_MODULES KBUILD_BUILTIN
+export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
+
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+#         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+#         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed. 
+# If it is set to "silent_", nothing will be printed at all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+#	$(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+
+ifeq ($(KBUILD_VERBOSE),1)
+  quiet =
+  Q =
+else
+  quiet=quiet_
+  Q = @
+endif
+
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
+
+ifneq ($(findstring s,$(MAKEFLAGS)),)
+  quiet=silent_
+endif
+
+export quiet Q KBUILD_VERBOSE
+
+
+# Look for make include files relative to root of kernel src
+MAKEFLAGS += --include-dir=$(srctree)
+
+# We need some generic definitions (do not try to remake the file).
+$(srctree)/scripts/Kbuild.include: ;
+include $(srctree)/scripts/Kbuild.include
+
+# Make variables (CC, etc...)
+
+AS		= $(CROSS_COMPILE)as
+LD		= $(CROSS_COMPILE)ld
+CC		= $(CROSS_COMPILE)gcc
+CPP		= $(CC) -E
+AR		= $(CROSS_COMPILE)ar
+NM		= $(CROSS_COMPILE)nm
+STRIP		= $(CROSS_COMPILE)strip
+OBJCOPY		= $(CROSS_COMPILE)objcopy
+OBJDUMP		= $(CROSS_COMPILE)objdump
+AWK		= awk
+GENKSYMS	= scripts/genksyms/genksyms
+INSTALLKERNEL  := installkernel
+DEPMOD		= /sbin/depmod
+KALLSYMS	= scripts/kallsyms
+PERL		= perl
+CHECK		= sparse
+
+CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
+		  -Wbitwise -Wno-return-void $(CF)
+CFLAGS_MODULE   =
+AFLAGS_MODULE   =
+LDFLAGS_MODULE  =
+CFLAGS_KERNEL	=
+AFLAGS_KERNEL	=
+CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage
+
+# Prefer linux-backports-modules
+ifneq ($(KBUILD_SRC),)
+ifneq ($(shell if test -e $(KBUILD_OUTPUT)/ubuntu-build; then echo yes; fi),yes)
+UBUNTUINCLUDE := -I/usr/src/linux-headers-lbm-$(KERNELRELEASE)
+endif
+endif
+
+# Use LINUXINCLUDE when you must reference the include/ directory.
+# Needed to be compatible with the O= option
+LINUXINCLUDE    := $(UBUNTUINCLUDE) -I$(srctree)/arch/$(hdr-arch)/include \
+                   -Iarch/$(hdr-arch)/include/generated -Iinclude \
+                   $(if $(KBUILD_SRC), -I$(srctree)/include) \
+                   -include $(srctree)/include/linux/kconfig.h
+
+<<<<<<<
+# UBUNTU: Include our third party driver stuff too
+LINUXINCLUDE   += -Iubuntu/include $(if $(KBUILD_SRC),-I$(srctree)/ubuntu/include)
+
+KBUILD_CPPFLAGS := -D__KERNEL__
+=======
+KBUILD_CPPFLAGS := -D__KERNEL__ -D__linux_kernel__
+>>>>>>>
+
+KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
+		   -fno-strict-aliasing -fno-common \
+		   -Werror-implicit-function-declaration \
+		   -Wno-format-security \
+		   -fno-delete-null-pointer-checks
+KBUILD_AFLAGS_KERNEL :=
+KBUILD_CFLAGS_KERNEL :=
+KBUILD_AFLAGS   := -D__ASSEMBLY__
+KBUILD_AFLAGS_MODULE  := -DMODULE
+KBUILD_CFLAGS_MODULE  := -DMODULE
+KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
+
+# Read KERNELRELEASE from include/config/kernel.release (if it exists)
+KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
+
+export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
+export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
+export CPP AR NM STRIP OBJCOPY OBJDUMP
+export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
+export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
+
+export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
+export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
+export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
+export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
+export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
+export KBUILD_ARFLAGS
+
+# When compiling out-of-tree modules, put MODVERDIR in the module
+# tree rather than in the kernel tree. The kernel tree might
+# even be read-only.
+export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
+
+# Files to ignore in find ... statements
+
+RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
+
+# ===========================================================================
+# Rules shared between *config targets and build targets
+
+# Basic helpers built in scripts/
+PHONY += scripts_basic
+scripts_basic:
+	$(Q)$(MAKE) $(build)=scripts/basic
+	$(Q)rm -f .tmp_quiet_recordmcount
+
+# To avoid any implicit rule to kick in, define an empty command.
+scripts/basic/%: scripts_basic ;
+
+PHONY += outputmakefile
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
+outputmakefile:
+ifneq ($(KBUILD_SRC),)
+	$(Q)ln -fsn $(srctree) source
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
+	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
+endif
+
+# Support for using generic headers in asm-generic
+PHONY += asm-generic
+asm-generic:
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
+	            obj=arch/$(SRCARCH)/include/generated/asm
+
+# To make sure we do not include .config for any of the *config targets
+# catch them early, and hand them over to scripts/kconfig/Makefile
+# It is allowed to specify more targets when calling make, including
+# mixing *config targets and build targets.
+# For example 'make oldconfig all'.
+# Detect when mixed targets is specified, and make a second invocation
+# of make so .config is not included in this case either (for *config).
+
+no-dot-config-targets := clean mrproper distclean \
+			 cscope gtags TAGS tags help %docs check% coccicheck \
+			 include/linux/version.h headers_% \
+			 kernelversion %src-pkg
+
+config-targets := 0
+mixed-targets  := 0
+dot-config     := 1
+
+ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
+	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
+		dot-config := 0
+	endif
+endif
+
+ifeq ($(KBUILD_EXTMOD),)
+        ifneq ($(filter config %config,$(MAKECMDGOALS)),)
+                config-targets := 1
+                ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
+                        mixed-targets := 1
+                endif
+        endif
+endif
+
+ifeq ($(mixed-targets),1)
+# ===========================================================================
+# We're called with mixed targets (*config and build targets).
+# Handle them one by one.
+
+%:: FORCE
+	$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
+
+else
+ifeq ($(config-targets),1)
+# ===========================================================================
+# *config targets only - make sure prerequisites are updated, and descend
+# in scripts/kconfig to make the *config target
+
+# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
+# KBUILD_DEFCONFIG may point out an alternative default configuration
+# used for 'make defconfig'
+include $(srctree)/arch/$(SRCARCH)/Makefile
+export KBUILD_DEFCONFIG KBUILD_KCONFIG
+
+config: scripts_basic outputmakefile FORCE
+	$(Q)mkdir -p include/linux include/config
+	$(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+%config: scripts_basic outputmakefile FORCE
+	$(Q)mkdir -p include/linux include/config
+	$(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+else
+# ===========================================================================
+# Build targets only - this includes vmlinux, arch specific targets, clean
+# targets and others. In general all targets except *config targets.
+
+ifeq ($(KBUILD_EXTMOD),)
+# Additional helpers built in scripts/
+# Carefully list dependencies so we do not try to build scripts twice
+# in parallel
+PHONY += scripts
+scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
+	$(Q)$(MAKE) $(build)=$(@)
+
+# Objects we will link into vmlinux / subdirs we need to visit
+init-y		:= init/
+drivers-y	:= drivers/ sound/ firmware/ ubuntu/
+net-y		:= net/
+libs-y		:= lib/
+core-y		:= usr/
+endif # KBUILD_EXTMOD
+
+ifeq ($(dot-config),1)
+# Read in config
+-include include/config/auto.conf
+
+ifeq ($(KBUILD_EXTMOD),)
+# Read in dependencies to all Kconfig* files, make sure to run
+# oldconfig if changes are detected.
+-include include/config/auto.conf.cmd
+
+# To avoid any implicit rule to kick in, define an empty command
+$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
+
+# If .config is newer than include/config/auto.conf, someone tinkered
+# with it and forgot to run make oldconfig.
+# if auto.conf.cmd is missing then we are probably in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
+	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
+else
+# external modules needs include/generated/autoconf.h and include/config/auto.conf
+# but do not care if they are up-to-date. Use auto.conf to trigger the test
+PHONY += include/config/auto.conf
+
+include/config/auto.conf:
+	$(Q)test -e include/generated/autoconf.h -a -e $@ || (		\
+	echo;								\
+	echo "  ERROR: Kernel configuration is invalid.";		\
+	echo "         include/generated/autoconf.h or $@ are missing.";\
+	echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";	\
+	echo;								\
+	/bin/false)
+
+endif # KBUILD_EXTMOD
+
+else
+# Dummy target needed, because used as prerequisite
+include/config/auto.conf: ;
+endif # $(dot-config)
+
+# The all: target is the default when no target is given on the
+# command line.
+# This allow a user to issue only 'make' to build a kernel including modules
+# Defaults to vmlinux, but the arch makefile usually adds further targets
+all: vmlinux
+
+ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+KBUILD_CFLAGS	+= -Os
+else
+KBUILD_CFLAGS	+= -O2
+endif
+
+include $(srctree)/arch/$(SRCARCH)/Makefile
+
+ifneq ($(CONFIG_FRAME_WARN),0)
+KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
+endif
+
+# Force gcc to behave correct even for buggy distributions
+ifndef CONFIG_CC_STACKPROTECTOR
+KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
+endif
+
+# This warning generated too much noise in a regular build.
+# Use make W=1 to enable this warning (see scripts/Makefile.build)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
+ifdef CONFIG_FRAME_POINTER
+KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
+else
+# Some targets (ARM with Thumb2, for example), can't be built with frame
+# pointers.  For those, we don't have FUNCTION_TRACER automatically
+# select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
+# incompatible with -fomit-frame-pointer with current GCC, so we don't use
+# -fomit-frame-pointer with FUNCTION_TRACER.
+ifndef CONFIG_FUNCTION_TRACER
+KBUILD_CFLAGS	+= -fomit-frame-pointer
+endif
+endif
+
+ifdef CONFIG_DEBUG_INFO
+KBUILD_CFLAGS	+= -g
+KBUILD_AFLAGS	+= -gdwarf-2
+endif
+
+ifdef CONFIG_DEBUG_INFO_REDUCED
+KBUILD_CFLAGS 	+= $(call cc-option, -femit-struct-debug-baseonly)
+endif
+
+ifdef CONFIG_FUNCTION_TRACER
+KBUILD_CFLAGS	+= -pg
+ifdef CONFIG_DYNAMIC_FTRACE
+	ifdef CONFIG_HAVE_C_RECORDMCOUNT
+		BUILD_C_RECORDMCOUNT := y
+		export BUILD_C_RECORDMCOUNT
+	endif
+endif
+endif
+
+# We trigger additional mismatches with less inlining
+ifdef CONFIG_DEBUG_SECTION_MISMATCH
+KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
+endif
+
+# arch Makefile may override CC so keep this after arch Makefile is included
+NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+CHECKFLAGS     += $(NOSTDINC_FLAGS)
+
+# warn about C99 declaration after statement
+KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+
+# disable pointer signed / unsigned warnings in gcc 4.0
+KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
+
+# disable invalid "can't wrap" optimizations for signed / pointers
+KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
+
+# conserve stack if available
+KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
+
+# use the deterministic mode of AR if available
+KBUILD_ARFLAGS := $(call ar-option,D)
+
+# check for 'asm goto'
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
+	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
+endif
+
+# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
+# But warn user when we do so
+warn-assign = \
+$(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")
+
+ifneq ($(KCPPFLAGS),)
+        $(call warn-assign,CPPFLAGS)
+        KBUILD_CPPFLAGS += $(KCPPFLAGS)
+endif
+ifneq ($(KAFLAGS),)
+        $(call warn-assign,AFLAGS)
+        KBUILD_AFLAGS += $(KAFLAGS)
+endif
+ifneq ($(KCFLAGS),)
+        $(call warn-assign,CFLAGS)
+        KBUILD_CFLAGS += $(KCFLAGS)
+endif
+
+# Use --build-id when available.
+LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
+			      $(call cc-ldoption, -Wl$(comma)--build-id,))
+KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
+LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
+
+ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
+LDFLAGS_vmlinux	+= $(call ld-option, -X,)
+endif
+
+# Default kernel image to build when no specific target is given.
+# KBUILD_IMAGE may be overruled on the command line or
+# set in the environment
+# Also any assignments in arch/$(ARCH)/Makefile take precedence over
+# this default value
+export KBUILD_IMAGE ?= vmlinux
+
+#
+# INSTALL_PATH specifies where to place the updated kernel and system map
+# images. Default is /boot, but you can set it to other values
+export	INSTALL_PATH ?= /boot
+
+#
+# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
+# relocations required by build roots.  This is not defined in the
+# makefile but the argument can be passed to make if needed.
+#
+
+MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
+export MODLIB
+
+#
+#  INSTALL_MOD_STRIP, if defined, will cause modules to be
+#  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
+#  the default option --strip-debug will be used.  Otherwise,
+#  INSTALL_MOD_STRIP value will be used as the options to the strip command.
+
+ifdef INSTALL_MOD_STRIP
+ifeq ($(INSTALL_MOD_STRIP),1)
+mod_strip_cmd = $(STRIP) --strip-debug
+else
+mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
+endif # INSTALL_MOD_STRIP=1
+else
+mod_strip_cmd = true
+endif # INSTALL_MOD_STRIP
+export mod_strip_cmd
+
+
+ifeq ($(KBUILD_EXTMOD),)
+core-y		+= kernel/ mm/ fs/ ipc/ security/ crypto/ block/
+
+vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
+		     $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
+		     $(net-y) $(net-m) $(libs-y) $(libs-m)))
+
+vmlinux-alldirs	:= $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
+		     $(init-n) $(init-) \
+		     $(core-n) $(core-) $(drivers-n) $(drivers-) \
+		     $(net-n)  $(net-)  $(libs-n)    $(libs-))))
+
+init-y		:= $(patsubst %/, %/built-in.o, $(init-y))
+core-y		:= $(patsubst %/, %/built-in.o, $(core-y))
+drivers-y	:= $(patsubst %/, %/built-in.o, $(drivers-y))
+net-y		:= $(patsubst %/, %/built-in.o, $(net-y))
+libs-y1		:= $(patsubst %/, %/lib.a, $(libs-y))
+libs-y2		:= $(patsubst %/, %/built-in.o, $(libs-y))
+libs-y		:= $(libs-y1) $(libs-y2)
+
+# Build vmlinux
+# ---------------------------------------------------------------------------
+# vmlinux is built from the objects selected by $(vmlinux-init) and
+# $(vmlinux-main). Most are built-in.o files from top-level directories
+# in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
+# Ordering when linking is important, and $(vmlinux-init) must be first.
+#
+# vmlinux
+#   ^
+#   |
+#   +-< $(vmlinux-init)
+#   |   +--< init/version.o + more
+#   |
+#   +--< $(vmlinux-main)
+#   |    +--< driver/built-in.o mm/built-in.o + more
+#   |
+#   +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
+#
+# vmlinux version (uname -v) cannot be updated during normal
+# descending-into-subdirs phase since we do not yet know if we need to
+# update vmlinux.
+# Therefore this step is delayed until just before final link of vmlinux -
+# except in the kallsyms case where it is done just before adding the
+# symbols to the kernel.
+#
+# System.map is generated to document addresses of all kernel symbols
+
+vmlinux-init := $(head-y) $(init-y)
+vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
+vmlinux-all  := $(vmlinux-init) $(vmlinux-main)
+vmlinux-lds  := arch/$(SRCARCH)/kernel/vmlinux.lds
+export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
+
+# Rule to link vmlinux - also used during CONFIG_KALLSYMS
+# May be overridden by arch/$(ARCH)/Makefile
+quiet_cmd_vmlinux__ ?= LD      $@
+      cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
+      -T $(vmlinux-lds) $(vmlinux-init)                          \
+      --start-group $(vmlinux-main) --end-group                  \
+      $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^)
+
+# Generate new vmlinux version
+quiet_cmd_vmlinux_version = GEN     .version
+      cmd_vmlinux_version = set -e;                     \
+	if [ ! -r .version ]; then			\
+	  rm -f .version;				\
+	  echo 1 >.version;				\
+	else						\
+	  mv .version .old_version;			\
+	  expr 0$$(cat .old_version) + 1 >.version;	\
+	fi;						\
+	$(MAKE) $(build)=init
+
+# Generate System.map
+quiet_cmd_sysmap = SYSMAP
+      cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
+
+# Link of vmlinux
+# If CONFIG_KALLSYMS is set .version is already updated
+# Generate System.map and verify that the content is consistent
+# Use + in front of the vmlinux_version rule to silent warning with make -j2
+# First command is ':' to allow us to use + in front of the rule
+define rule_vmlinux__
+	:
+	$(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
+
+	$(call cmd,vmlinux__)
+	$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
+
+	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
+	  echo '  $($(quiet)cmd_sysmap)  System.map' &&)                     \
+	$(cmd_sysmap) $@ System.map;                                         \
+	if [ $$? -ne 0 ]; then                                               \
+		rm -f $@;                                                    \
+		/bin/false;                                                  \
+	fi;
+	$(verify_kallsyms)
+endef
+
+
+ifdef CONFIG_KALLSYMS
+# Generate section listing all symbols and add it into vmlinux $(kallsyms.o)
+# It's a three stage process:
+# o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
+#   empty
+#   Running kallsyms on that gives us .tmp_kallsyms1.o with
+#   the right size - vmlinux version (uname -v) is updated during this step
+# o .tmp_vmlinux2 now has a __kallsyms section of the right size,
+#   but due to the added section, some addresses have shifted.
+#   From here, we generate a correct .tmp_kallsyms2.o
+# o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
+# o Verify that the System.map from vmlinux matches the map from
+#   .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
+# o If 'make KALLSYMS_EXTRA_PASS=1" was used, do an extra pass using
+#   .tmp_vmlinux3 and .tmp_kallsyms3.o.  This is only meant as a
+#   temporary bypass to allow the kernel to be built while the
+#   maintainers work out what went wrong with kallsyms.
+
+last_kallsyms := 2
+
+ifdef KALLSYMS_EXTRA_PASS
+ifneq ($(KALLSYMS_EXTRA_PASS),0)
+last_kallsyms := 3
+endif
+endif
+
+kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
+
+define verify_kallsyms
+	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
+	  echo '  $($(quiet)cmd_sysmap)  .tmp_System.map' &&)                \
+	  $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
+	$(Q)cmp -s System.map .tmp_System.map ||                             \
+		(echo Inconsistent kallsyms data;                            \
+		 echo This is a bug - please report about it;                \
+		 echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround;      \
+		 rm .tmp_kallsyms* ; /bin/false )
+endef
+
+# Update vmlinux version before link
+# Use + in front of this rule to silent warning about make -j1
+# First command is ':' to allow us to use + in front of this rule
+cmd_ksym_ld = $(cmd_vmlinux__)
+define rule_ksym_ld
+	: 
+	+$(call cmd,vmlinux_version)
+	$(call cmd,vmlinux__)
+	$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
+endef
+
+# Generate .S file with all kernel symbols
+quiet_cmd_kallsyms = KSYM    $@
+      cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
+                     $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
+
+.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
+	$(call if_changed_dep,as_o_S)
+
+.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
+	$(call cmd,kallsyms)
+
+# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
+.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
+	$(call if_changed_rule,ksym_ld)
+
+.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
+	$(call if_changed,vmlinux__)
+
+.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
+	$(call if_changed,vmlinux__)
+
+# Needs to visit scripts/ before $(KALLSYMS) can be used.
+$(KALLSYMS): scripts ;
+
+# Generate some data for debugging strange kallsyms problems
+debug_kallsyms: .tmp_map$(last_kallsyms)
+
+.tmp_map%: .tmp_vmlinux% FORCE
+	($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
+
+.tmp_map3: .tmp_map2
+
+.tmp_map2: .tmp_map1
+
+endif # ifdef CONFIG_KALLSYMS
+
+# Do modpost on a prelinked vmlinux. The finally linked vmlinux has
+# relevant sections renamed as per the linker script.
+quiet_cmd_vmlinux-modpost = LD      $@
+      cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@                          \
+	 $(vmlinux-init) --start-group $(vmlinux-main) --end-group             \
+	 $(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
+define rule_vmlinux-modpost
+	:
+	+$(call cmd,vmlinux-modpost)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
+	$(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd
+endef
+
+# vmlinux image - including updated kernel symbols
+vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o $(kallsyms.o) FORCE
+ifdef CONFIG_HEADERS_CHECK
+	$(Q)$(MAKE) -f $(srctree)/Makefile headers_check
+endif
+ifdef CONFIG_SAMPLES
+	$(Q)$(MAKE) $(build)=samples
+endif
+ifdef CONFIG_BUILD_DOCSRC
+	$(Q)$(MAKE) $(build)=Documentation
+endif
+	$(call vmlinux-modpost)
+	$(call if_changed_rule,vmlinux__)
+	$(Q)rm -f .old_version
+
+# build vmlinux.o first to catch section mismatch errors early
+ifdef CONFIG_KALLSYMS
+.tmp_vmlinux1: vmlinux.o
+endif
+
+modpost-init := $(filter-out init/built-in.o, $(vmlinux-init))
+vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE
+	$(call if_changed_rule,vmlinux-modpost)
+
+# The actual objects are generated when descending, 
+# make sure no implicit rule kicks in
+$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
+
+# Handle descending into subdirectories listed in $(vmlinux-dirs)
+# Preset locale variables to speed up the build process. Limit locale
+# tweaks to this spot to avoid wrong language settings when running
+# make menuconfig etc.
+# Error messages still appears in the original language
+
+PHONY += $(vmlinux-dirs)
+$(vmlinux-dirs): prepare scripts
+	$(Q)$(MAKE) $(build)=$@
+
+# Store (new) KERNELRELASE string in include/config/kernel.release
+include/config/kernel.release: include/config/auto.conf FORCE
+	$(Q)rm -f $@
+	$(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
+
+
+# Things we need to do before we recursively start building the kernel
+# or the modules are listed in "prepare".
+# A multi level approach is used. prepareN is processed before prepareN-1.
+# archprepare is used in arch Makefiles and when processed asm symlink,
+# version.h and scripts_basic is processed / created.
+
+# Listed in dependency order
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
+
+# prepare3 is used to check if we are building in a separate output directory,
+# and if so do:
+# 1) Check that make has not been executed in the kernel src $(srctree)
+prepare3: include/config/kernel.release
+ifneq ($(KBUILD_SRC),)
+	@$(kecho) '  Using $(srctree) as source for kernel'
+	$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
+		echo "  $(srctree) is not clean, please run 'make mrproper'";\
+		echo "  in the '$(srctree)' directory.";\
+		/bin/false; \
+	fi;
+endif
+
+# prepare2 creates a makefile if using a separate output directory
+prepare2: prepare3 outputmakefile asm-generic
+
+prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
+                   include/config/auto.conf
+	$(cmd_crmodverdir)
+
+archprepare: prepare1 scripts_basic
+
+prepare0: archprepare FORCE
+	$(Q)$(MAKE) $(build)=.
+	$(Q)$(MAKE) $(build)=. missing-syscalls
+
+# All the preparing..
+prepare: prepare0
+
+# Generate some files
+# ---------------------------------------------------------------------------
+
+# KERNELRELEASE can change from a few different places, meaning version.h
+# needs to be updated, so this check is forced on all builds
+
+uts_len := 64
+define filechk_utsrelease.h
+	if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
+	  echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
+	  exit 1;                                                         \
+	fi;                                                               \
+	(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
+endef
+
+define filechk_version.h
+	(echo \#define LINUX_VERSION_CODE $(shell                             \
+	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL));    \
+	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
+endef
+
+include/linux/version.h: $(srctree)/Makefile FORCE
+	$(call filechk,version.h)
+
+include/generated/utsrelease.h: include/config/kernel.release FORCE
+	$(call filechk,utsrelease.h)
+
+PHONY += headerdep
+headerdep:
+	$(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
+	$(srctree)/scripts/headerdep.pl -I$(srctree)/include
+
+# ---------------------------------------------------------------------------
+
+PHONY += depend dep
+depend dep:
+	@echo '*** Warning: make $@ is unnecessary now.'
+
+# ---------------------------------------------------------------------------
+# Firmware install
+INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
+export INSTALL_FW_PATH
+
+PHONY += firmware_install
+firmware_install: FORCE
+	@mkdir -p $(objtree)/firmware
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
+
+# ---------------------------------------------------------------------------
+# Kernel headers
+
+#Default location for installed headers
+export INSTALL_HDR_PATH = $(objtree)/usr
+
+hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
+
+# If we do an all arch process set dst to asm-$(hdr-arch)
+hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
+
+PHONY += __headers
+__headers: include/linux/version.h scripts_basic asm-generic FORCE
+	$(Q)$(MAKE) $(build)=scripts build_unifdef
+
+PHONY += headers_install_all
+headers_install_all:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
+
+PHONY += headers_install
+headers_install: __headers
+	$(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \
+	$(error Headers not exportable for the $(SRCARCH) architecture))
+	$(Q)$(MAKE) $(hdr-inst)=include
+	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst)
+
+PHONY += headers_check_all
+headers_check_all: headers_install_all
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
+
+PHONY += headers_check
+headers_check: headers_install
+	$(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
+	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1
+
+# ---------------------------------------------------------------------------
+# Modules
+
+ifdef CONFIG_MODULES
+
+# By default, build modules as well
+
+all: modules
+
+#	Build modules
+#
+#	A module can be listed more than once in obj-m resulting in
+#	duplicate lines in modules.order files.  Those are removed
+#	using awk while concatenating to the final file.
+
+PHONY += modules
+modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
+	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
+	@$(kecho) '  Building modules, stage 2.';
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
+
+modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
+	$(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
+
+%/modules.builtin: include/config/auto.conf
+	$(Q)$(MAKE) $(modbuiltin)=$*
+
+
+# Target to prepare building external modules
+PHONY += modules_prepare
+modules_prepare: prepare scripts
+
+# Target to install modules
+PHONY += modules_install
+modules_install: _modinst_ _modinst_post
+
+PHONY += _modinst_
+_modinst_:
+	@rm -rf $(MODLIB)/kernel
+	@rm -f $(MODLIB)/source
+	@mkdir -p $(MODLIB)/kernel
+	@ln -s $(srctree) $(MODLIB)/source
+	@if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
+		rm -f $(MODLIB)/build ; \
+		ln -s $(objtree) $(MODLIB)/build ; \
+	fi
+	@cp -f $(objtree)/modules.order $(MODLIB)/
+	@cp -f $(objtree)/modules.builtin $(MODLIB)/
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+
+# This depmod is only for convenience to give the initial
+# boot a modules.dep even before / is mounted read-write.  However the
+# boot script depmod is the master version.
+PHONY += _modinst_post
+_modinst_post: _modinst_
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
+	$(call cmd,depmod)
+
+else # CONFIG_MODULES
+
+# Modules not configured
+# ---------------------------------------------------------------------------
+
+modules modules_install: FORCE
+	@echo
+	@echo "The present kernel configuration has modules disabled."
+	@echo "Type 'make config' and enable loadable module support."
+	@echo "Then build a kernel with module support enabled."
+	@echo
+	@exit 1
+
+endif # CONFIG_MODULES
+
+###
+# Cleaning is done on three levels.
+# make clean     Delete most generated files
+#                Leave enough to build external modules
+# make mrproper  Delete the current configuration, and all generated files
+# make distclean Remove editor backup files, patch leftover files and the like
+
+# Directories & files removed with 'make clean'
+CLEAN_DIRS  += $(MODVERDIR)
+CLEAN_FILES +=	vmlinux System.map \
+                .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
+
+# Directories & files removed with 'make mrproper'
+MRPROPER_DIRS  += include/config usr/include include/generated          \
+                  arch/*/include/generated
+MRPROPER_FILES += .config .config.old .version .old_version             \
+                  include/linux/version.h                               \
+		  Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
+
+# clean - Delete most, but leave enough to build external modules
+#
+clean: rm-dirs  := $(CLEAN_DIRS)
+clean: rm-files := $(CLEAN_FILES)
+clean-dirs      := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation)
+
+PHONY += $(clean-dirs) clean archclean
+$(clean-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+clean: archclean
+
+# mrproper - Delete all generated files, including .config
+#
+mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
+mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
+mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
+
+PHONY += $(mrproper-dirs) mrproper archmrproper
+$(mrproper-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
+
+mrproper: clean archmrproper $(mrproper-dirs)
+	$(call cmd,rmdirs)
+	$(call cmd,rmfiles)
+
+# distclean
+#
+PHONY += distclean
+
+distclean: mrproper
+	@find $(srctree) $(RCS_FIND_IGNORE) \
+		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
+		-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
+		-o -name '.*.rej' -o -size 0 \
+		-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
+		-type f -print | xargs rm -f
+
+
+# Packaging of the kernel to various formats
+# ---------------------------------------------------------------------------
+# rpm target kept for backward compatibility
+package-dir	:= $(srctree)/scripts/package
+
+%src-pkg: FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+%pkg: include/config/kernel.release FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+rpm: include/config/kernel.release FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+
+
+# Brief documentation of the typical targets used
+# ---------------------------------------------------------------------------
+
+boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
+boards := $(notdir $(boards))
+board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
+board-dirs := $(sort $(notdir $(board-dirs:/=)))
+
+help:
+	@echo  'Cleaning targets:'
+	@echo  '  clean		  - Remove most generated files but keep the config and'
+	@echo  '                    enough build support to build external modules'
+	@echo  '  mrproper	  - Remove all generated files + config + various backup files'
+	@echo  '  distclean	  - mrproper + remove editor backup and patch files'
+	@echo  ''
+	@echo  'Configuration targets:'
+	@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
+	@echo  ''
+	@echo  'Other generic targets:'
+	@echo  '  all		  - Build all targets marked with [*]'
+	@echo  '* vmlinux	  - Build the bare kernel'
+	@echo  '* modules	  - Build all modules'
+	@echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
+	@echo  '  firmware_install- Install all firmware to INSTALL_FW_PATH'
+	@echo  '                    (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
+	@echo  '  dir/            - Build all files in dir and below'
+	@echo  '  dir/file.[oisS] - Build specified target only'
+	@echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
+	@echo  '                    (requires a recent binutils and recent build (System.map))'
+	@echo  '  dir/file.ko     - Build module including final link'
+	@echo  '  modules_prepare - Set up for building external modules'
+	@echo  '  tags/TAGS	  - Generate tags file for editors'
+	@echo  '  cscope	  - Generate cscope index'
+	@echo  '  gtags           - Generate GNU GLOBAL index'
+	@echo  '  kernelrelease	  - Output the release version string'
+	@echo  '  kernelversion	  - Output the version stored in Makefile'
+	@echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
+	 echo  '                    (default: $(INSTALL_HDR_PATH))'; \
+	 echo  ''
+	@echo  'Static analysers'
+	@echo  '  checkstack      - Generate a list of stack hogs'
+	@echo  '  namespacecheck  - Name space analysis on compiled kernel'
+	@echo  '  versioncheck    - Sanity check on version.h usage'
+	@echo  '  includecheck    - Check for duplicate included header files'
+	@echo  '  export_report   - List the usages of all exported symbols'
+	@echo  '  headers_check   - Sanity check on exported headers'
+	@echo  '  headerdep       - Detect inclusion cycles in headers'
+	@$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
+	@echo  ''
+	@echo  'Kernel packaging:'
+	@$(MAKE) $(build)=$(package-dir) help
+	@echo  ''
+	@echo  'Documentation targets:'
+	@$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
+	@echo  ''
+	@echo  'Architecture specific targets ($(SRCARCH)):'
+	@$(if $(archhelp),$(archhelp),\
+		echo '  No architecture specific help defined for $(SRCARCH)')
+	@echo  ''
+	@$(if $(boards), \
+		$(foreach b, $(boards), \
+		printf "  %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
+		echo '')
+	@$(if $(board-dirs), \
+		$(foreach b, $(board-dirs), \
+		printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
+		printf "  %-16s - Show all of the above\\n" help-boards; \
+		echo '')
+
+	@echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
+	@echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
+	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
+	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
+	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
+	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
+	@echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
+	@echo  '		1: warnings which may be relevant and do not occur too often'
+	@echo  '		2: warnings which occur quite often but may still be relevant'
+	@echo  '		3: more obscure warnings, can most likely be ignored'
+	@echo  '		Multiple levels can be combined with W=12 or W=123'
+	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
+	@echo  ''
+	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
+	@echo  'For further info see the ./README file'
+
+
+help-board-dirs := $(addprefix help-,$(board-dirs))
+
+help-boards: $(help-board-dirs)
+
+boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))
+
+$(help-board-dirs): help-%:
+	@echo  'Architecture specific targets ($(SRCARCH) $*):'
+	@$(if $(boards-per-dir), \
+		$(foreach b, $(boards-per-dir), \
+		printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
+		echo '')
+
+
+# Documentation targets
+# ---------------------------------------------------------------------------
+%docs: scripts_basic FORCE
+	$(Q)$(MAKE) $(build)=scripts build_docproc
+	$(Q)$(MAKE) $(build)=Documentation/DocBook $@
+
+else # KBUILD_EXTMOD
+
+###
+# External module support.
+# When building external modules the kernel used as basis is considered
+# read-only, and no consistency checks are made and the make
+# system is not used on the basis kernel. If updates are required
+# in the basis kernel ordinary make commands (without M=...) must
+# be used.
+#
+# The following are the only valid targets when building external
+# modules.
+# make M=dir clean     Delete all automatically generated files
+# make M=dir modules   Make all modules in specified dir
+# make M=dir	       Same as 'make M=dir modules'
+# make M=dir modules_install
+#                      Install the modules built in the module directory
+#                      Assumes install directory is already created
+
+# We are always building modules
+KBUILD_MODULES := 1
+PHONY += crmodverdir
+crmodverdir:
+	$(cmd_crmodverdir)
+
+PHONY += $(objtree)/Module.symvers
+$(objtree)/Module.symvers:
+	@test -e $(objtree)/Module.symvers || ( \
+	echo; \
+	echo "  WARNING: Symbol version dump $(objtree)/Module.symvers"; \
+	echo "           is missing; modules will have no dependencies and modversions."; \
+	echo )
+
+module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
+PHONY += $(module-dirs) modules
+$(module-dirs): crmodverdir $(objtree)/Module.symvers
+	$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
+
+modules: $(module-dirs)
+	@$(kecho) '  Building modules, stage 2.';
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+PHONY += modules_install
+modules_install: _emodinst_ _emodinst_post
+
+install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
+PHONY += _emodinst_
+_emodinst_:
+	$(Q)mkdir -p $(MODLIB)/$(install-dir)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+
+PHONY += _emodinst_post
+_emodinst_post: _emodinst_
+	$(call cmd,depmod)
+
+clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
+
+PHONY += $(clean-dirs) clean
+$(clean-dirs):
+	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+clean:	rm-dirs := $(MODVERDIR)
+clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
+
+help:
+	@echo  '  Building external modules.'
+	@echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
+	@echo  ''
+	@echo  '  modules         - default target, build the module(s)'
+	@echo  '  modules_install - install the module'
+	@echo  '  clean           - remove generated files in module directory only'
+	@echo  ''
+
+# Dummies...
+PHONY += prepare scripts
+prepare: ;
+scripts: ;
+endif # KBUILD_EXTMOD
+
+clean: $(clean-dirs)
+	$(call cmd,rmdirs)
+	$(call cmd,rmfiles)
+	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
+		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
+		-o -name '*.symtypes' -o -name 'modules.order' \
+		-o -name modules.builtin -o -name '.tmp_*.o.*' \
+		-o -name '*.gcno' \) -type f -print | xargs rm -f
+
+# Generate tags for editors
+# ---------------------------------------------------------------------------
+quiet_cmd_tags = GEN     $@
+      cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
+
+tags TAGS cscope gtags: FORCE
+	$(call cmd,tags)
+
+# Scripts to check various things for consistency
+# ---------------------------------------------------------------------------
+
+PHONY += includecheck versioncheck coccicheck namespacecheck export_report
+
+includecheck:
+	find $(srctree)/* $(RCS_FIND_IGNORE) \
+		-name '*.[hcS]' -type f -print | sort \
+		| xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
+
+versioncheck:
+	find $(srctree)/* $(RCS_FIND_IGNORE) \
+		-name '*.[hcS]' -type f -print | sort \
+		| xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
+
+coccicheck:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
+
+namespacecheck:
+	$(PERL) $(srctree)/scripts/namespace.pl
+
+export_report:
+	$(PERL) $(srctree)/scripts/export_report.pl
+
+endif #ifeq ($(config-targets),1)
+endif #ifeq ($(mixed-targets),1)
+
+PHONY += checkstack kernelrelease kernelversion
+
+# UML needs a little special treatment here.  It wants to use the host
+# toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
+# else wants $(ARCH), including people doing cross-builds, which means
+# that $(SUBARCH) doesn't work here.
+ifeq ($(ARCH), um)
+CHECKSTACK_ARCH := $(SUBARCH)
+else
+CHECKSTACK_ARCH := $(ARCH)
+endif
+checkstack:
+	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
+	$(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
+
+kernelrelease:
+	@echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+
+kernelversion:
+	@echo $(KERNELVERSION)
+
+# Single targets
+# ---------------------------------------------------------------------------
+# Single targets are compatible with:
+# - build with mixed source and output
+# - build with separate output dir 'make O=...'
+# - external modules
+#
+#  target-dir => where to store outputfile
+#  build-dir  => directory in kernel source tree to use
+
+ifeq ($(KBUILD_EXTMOD),)
+        build-dir  = $(patsubst %/,%,$(dir $@))
+        target-dir = $(dir $@)
+else
+        zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
+        build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
+        target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
+endif
+
+%.s: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.i: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.lst: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.s: %.S prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.S prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.symtypes: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+
+# Modules
+/: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+	$(build)=$(build-dir)
+%/: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+	$(build)=$(build-dir)
+%.ko: prepare scripts FORCE
+	$(cmd_crmodverdir)
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
+	$(build)=$(build-dir) $(@:.ko=.o)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+# FIXME Should go into a make.lib or something 
+# ===========================================================================
+
+quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
+      cmd_rmdirs = rm -rf $(rm-dirs)
+
+quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
+      cmd_rmfiles = rm -f $(rm-files)
+
+# Run depmod only if we have System.map and depmod is executable
+quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
+      cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
+                   $(KERNELRELEASE)
+
+# Create temporary dir for module support files
+# clean it up only when building all modules
+cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
+                  $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
+
+a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
+	  $(KBUILD_AFLAGS_KERNEL)                              \
+	  $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \
+	  $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
+
+quiet_cmd_as_o_S = AS      $@
+cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<
+
+# read all saved command lines
+
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
+
+ifneq ($(cmd_files),)
+  $(cmd_files): ;	# Do not try to update included dependency files
+  include $(cmd_files)
+endif
+
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
+# Usage:
+# $(Q)$(MAKE) $(clean)=dir
+clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+
+endif	# skip-makefile
+
+PHONY += FORCE
+FORCE:
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable so we can use it in if_changed and friends.
+.PHONY: $(PHONY)
diff --git a/debian.linaro/ci/rr-cache/16e3c3d16118997a64101a1bef9fd7929bfede48/postimage b/debian.linaro/ci/rr-cache/16e3c3d16118997a64101a1bef9fd7929bfede48/postimage
new file mode 100644
index 0000000..521667d
--- /dev/null
+++ b/debian.linaro/ci/rr-cache/16e3c3d16118997a64101a1bef9fd7929bfede48/postimage
@@ -0,0 +1,158 @@
+#
+# linux/arch/arm/boot/compressed/Makefile
+#
+# create a compressed vmlinuz image from the original vmlinux
+#
+
+OBJS		=
+
+# Ensure that MMCIF loader code appears early in the image
+# to minimise that number of bocks that have to be read in
+# order to load it.
+ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
+OBJS		+= mmcif-sh7372.o
+endif
+
+# Ensure that SDHI loader code appears early in the image
+# to minimise that number of bocks that have to be read in
+# order to load it.
+ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y)
+OBJS		+= sdhi-shmobile.o
+OBJS		+= sdhi-sh7372.o
+endif
+
+AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
+HEAD	= head.o
+OBJS	+= misc.o decompress.o
+FONTC	= $(srctree)/drivers/video/console/font_acorn_8x8.c
+
+#
+# Architecture dependencies
+#
+ifeq ($(CONFIG_ARCH_ACORN),y)
+OBJS		+= ll_char_wr.o font.o
+endif
+
+ifeq ($(CONFIG_ARCH_SHARK),y)
+OBJS		+= head-shark.o ofw-shark.o
+endif
+
+ifeq ($(CONFIG_ARCH_P720T),y)
+# Borrow this code from SA1100
+OBJS		+= head-sa1100.o
+endif
+
+ifeq ($(CONFIG_ARCH_SA1100),y)
+OBJS		+= head-sa1100.o
+endif
+
+ifeq ($(CONFIG_ARCH_VT8500),y)
+OBJS		+= head-vt8500.o
+endif
+
+ifeq ($(CONFIG_CPU_XSCALE),y)
+OBJS		+= head-xscale.o
+endif
+
+ifeq ($(CONFIG_PXA_SHARPSL_DETECT_MACH_ID),y)
+OBJS		+= head-sharpsl.o
+endif
+
+ifeq ($(CONFIG_CPU_ENDIAN_BE32),y)
+ifeq ($(CONFIG_CPU_CP15),y)
+OBJS		+= big-endian.o
+else
+# The endian should be set by h/w design.
+endif
+endif
+
+ifeq ($(CONFIG_ARCH_SHMOBILE),y)
+OBJS		+= head-shmobile.o
+endif
+
+#
+# We now have a PIC decompressor implementation.  Decompressors running
+# from RAM should not define ZTEXTADDR.  Decompressors running directly
+# from ROM or Flash must define ZTEXTADDR (preferably via the config)
+# FIXME: Previous assignment to ztextaddr-y is lost here. See SHARK
+ifeq ($(CONFIG_ZBOOT_ROM),y)
+ZTEXTADDR	:= $(CONFIG_ZBOOT_ROM_TEXT)
+ZBSSADDR	:= $(CONFIG_ZBOOT_ROM_BSS)
+else
+ZTEXTADDR	:= 0
+ZBSSADDR	:= ALIGN(8)
+endif
+
+SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
+
+suffix_$(CONFIG_KERNEL_GZIP) = gzip
+suffix_$(CONFIG_KERNEL_LZO)  = lzo
+suffix_$(CONFIG_KERNEL_LZMA) = lzma
+
+targets       := vmlinux vmlinux.lds \
+		 piggy.$(suffix_y) piggy.$(suffix_y).o \
+		 font.o font.c head.o misc.o $(OBJS)
+
+# Make sure files are removed during clean
+extra-y       += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
+
+ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ORIG_CFLAGS := $(KBUILD_CFLAGS)
+KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
+endif
+
+ccflags-y := -fpic -fno-builtin
+asflags-y := -Wa,-march=armv7-a
+
+# Supply ZRELADDR to the decompressor via a linker symbol.
+ifneq ($(CONFIG_AUTO_ZRELADDR),y)
+LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
+endif
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux += --be8
+endif
+# ?
+LDFLAGS_vmlinux += -p
+# Report unresolved symbol references
+LDFLAGS_vmlinux += --no-undefined
+# Delete all temporary local symbols
+LDFLAGS_vmlinux += -X
+# Next argument is a linker script
+LDFLAGS_vmlinux += -T
+
+# For __aeabi_uidivmod
+lib1funcs = $(obj)/lib1funcs.o
+
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
+	$(call cmd,shipped)
+
+# We need to prevent any GOTOFF relocs being used with references
+# to symbols in the .bss section since we cannot relocate them
+# independently from the rest at run time.  This can be achieved by
+# ensuring that no private .bss symbols exist, as global symbols
+# always have a GOT entry which is what we need.
+# The .data section is already discarded by the linker script so no need
+# to bother about it here.
+check_for_bad_syms = \
+bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
+[ -z "$$bad_syms" ] || \
+  ( echo "following symbols must have non local/private scope:" >&2; \
+    echo "$$bad_syms" >&2; rm -f $@; false )
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
+	 	$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
+	$(call if_changed,ld)
+	@$(check_for_bad_syms)
+
+$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
+	$(call if_changed,$(suffix_y))
+
+$(obj)/piggy.$(suffix_y).o:  $(obj)/piggy.$(suffix_y) FORCE
+
+CFLAGS_font.o := -Dstatic=
+
+$(obj)/font.c: $(FONTC)
+	$(call cmd,shipped)
+
+$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
+	@sed "$(SEDFLAGS)" < $< > $@
diff --git a/debian.linaro/ci/rr-cache/16e3c3d16118997a64101a1bef9fd7929bfede48/preimage b/debian.linaro/ci/rr-cache/16e3c3d16118997a64101a1bef9fd7929bfede48/preimage
new file mode 100644
index 0000000..f8958e9
--- /dev/null
+++ b/debian.linaro/ci/rr-cache/16e3c3d16118997a64101a1bef9fd7929bfede48/preimage
@@ -0,0 +1,163 @@
+#
+# linux/arch/arm/boot/compressed/Makefile
+#
+# create a compressed vmlinuz image from the original vmlinux
+#
+
+OBJS		=
+
+# Ensure that MMCIF loader code appears early in the image
+# to minimise that number of bocks that have to be read in
+# order to load it.
+ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
+OBJS		+= mmcif-sh7372.o
+endif
+
+# Ensure that SDHI loader code appears early in the image
+# to minimise that number of bocks that have to be read in
+# order to load it.
+ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y)
+OBJS		+= sdhi-shmobile.o
+OBJS		+= sdhi-sh7372.o
+endif
+
+AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
+HEAD	= head.o
+OBJS	+= misc.o decompress.o
+FONTC	= $(srctree)/drivers/video/console/font_acorn_8x8.c
+
+#
+# Architecture dependencies
+#
+ifeq ($(CONFIG_ARCH_ACORN),y)
+OBJS		+= ll_char_wr.o font.o
+endif
+
+ifeq ($(CONFIG_ARCH_SHARK),y)
+OBJS		+= head-shark.o ofw-shark.o
+endif
+
+ifeq ($(CONFIG_ARCH_P720T),y)
+# Borrow this code from SA1100
+OBJS		+= head-sa1100.o
+endif
+
+ifeq ($(CONFIG_ARCH_SA1100),y)
+OBJS		+= head-sa1100.o
+endif
+
+ifeq ($(CONFIG_ARCH_VT8500),y)
+OBJS		+= head-vt8500.o
+endif
+
+ifeq ($(CONFIG_CPU_XSCALE),y)
+OBJS		+= head-xscale.o
+endif
+
+ifeq ($(CONFIG_PXA_SHARPSL_DETECT_MACH_ID),y)
+OBJS		+= head-sharpsl.o
+endif
+
+ifeq ($(CONFIG_CPU_ENDIAN_BE32),y)
+ifeq ($(CONFIG_CPU_CP15),y)
+OBJS		+= big-endian.o
+else
+# The endian should be set by h/w design.
+endif
+endif
+
+ifeq ($(CONFIG_ARCH_SHMOBILE),y)
+OBJS		+= head-shmobile.o
+endif
+
+#
+# We now have a PIC decompressor implementation.  Decompressors running
+# from RAM should not define ZTEXTADDR.  Decompressors running directly
+# from ROM or Flash must define ZTEXTADDR (preferably via the config)
+# FIXME: Previous assignment to ztextaddr-y is lost here. See SHARK
+ifeq ($(CONFIG_ZBOOT_ROM),y)
+ZTEXTADDR	:= $(CONFIG_ZBOOT_ROM_TEXT)
+ZBSSADDR	:= $(CONFIG_ZBOOT_ROM_BSS)
+else
+ZTEXTADDR	:= 0
+ZBSSADDR	:= ALIGN(8)
+endif
+
+SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
+
+suffix_$(CONFIG_KERNEL_GZIP) = gzip
+suffix_$(CONFIG_KERNEL_LZO)  = lzo
+suffix_$(CONFIG_KERNEL_LZMA) = lzma
+
+targets       := vmlinux vmlinux.lds \
+		 piggy.$(suffix_y) piggy.$(suffix_y).o \
+		 font.o font.c head.o misc.o $(OBJS)
+
+# Make sure files are removed during clean
+extra-y       += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
+
+ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ORIG_CFLAGS := $(KBUILD_CFLAGS)
+KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
+endif
+
+<<<<<<<
+ccflags-y := -fpic -fno-builtin
+asflags-y := -Wa,-march=all
+=======
+ccflags-y := -fpic -fno-builtin -I$(obj)
+asflags-y := -Wa,-march=armv7-a
+>>>>>>>
+
+# Supply ZRELADDR to the decompressor via a linker symbol.
+ifneq ($(CONFIG_AUTO_ZRELADDR),y)
+LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
+endif
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux += --be8
+endif
+# ?
+LDFLAGS_vmlinux += -p
+# Report unresolved symbol references
+LDFLAGS_vmlinux += --no-undefined
+# Delete all temporary local symbols
+LDFLAGS_vmlinux += -X
+# Next argument is a linker script
+LDFLAGS_vmlinux += -T
+
+# For __aeabi_uidivmod
+lib1funcs = $(obj)/lib1funcs.o
+
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
+	$(call cmd,shipped)
+
+# We need to prevent any GOTOFF relocs being used with references
+# to symbols in the .bss section since we cannot relocate them
+# independently from the rest at run time.  This can be achieved by
+# ensuring that no private .bss symbols exist, as global symbols
+# always have a GOT entry which is what we need.
+# The .data section is already discarded by the linker script so no need
+# to bother about it here.
+check_for_bad_syms = \
+bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
+[ -z "$$bad_syms" ] || \
+  ( echo "following symbols must have non local/private scope:" >&2; \
+    echo "$$bad_syms" >&2; rm -f $@; false )
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
+	 	$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
+	$(call if_changed,ld)
+	@$(check_for_bad_syms)
+
+$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
+	$(call if_changed,$(suffix_y))
+
+$(obj)/piggy.$(suffix_y).o:  $(obj)/piggy.$(suffix_y) FORCE
+
+CFLAGS_font.o := -Dstatic=
+
+$(obj)/font.c: $(FONTC)
+	$(call cmd,shipped)
+
+$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
+	@sed "$(SEDFLAGS)" < $< > $@
diff --git a/debian.linaro/ci/rr-cache/935ec1e8d616457e92d91aa33eb16eb2c62c0fe2/preimage b/debian.linaro/ci/rr-cache/935ec1e8d616457e92d91aa33eb16eb2c62c0fe2/preimage
new file mode 100644
index 0000000..b55ff22
--- /dev/null
+++ b/debian.linaro/ci/rr-cache/935ec1e8d616457e92d91aa33eb16eb2c62c0fe2/preimage
@@ -0,0 +1,1006 @@
+/*
+ * linux/arch/arm/mach-omap2/devices.c
+ *
+ * OMAP2 platform device setup/initialization
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/pmu.h>
+
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/mcbsp.h>
+#include <mach/gpio.h>
+#include <plat/mmc.h>
+#include <plat/dma.h>
+#include <plat/gpu.h>
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
+#include <plat/omap4-keypad.h>
+
+#include <sound/omap-abe-dsp.h>
+
+#include "mux.h"
+#include "control.h"
+#include "devices.h"
+
+#define L3_MODULES_MAX_LEN 12
+#define L3_MODULES 3
+
+static int __init omap3_l3_init(void)
+{
+	int l;
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+	char oh_name[L3_MODULES_MAX_LEN];
+
+	/*
+	 * To avoid code running on other OMAPs in
+	 * multi-omap builds
+	 */
+	if (!(cpu_is_omap34xx()))
+		return -ENODEV;
+
+	l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
+
+	oh = omap_hwmod_lookup(oh_name);
+
+	if (!oh)
+		pr_err("could not look up %s\n", oh_name);
+
+	od = omap_device_build("omap_l3_smx", 0, oh, NULL, 0,
+							   NULL, 0, 0);
+
+	WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
+
+	return IS_ERR(od) ? PTR_ERR(od) : 0;
+}
+postcore_initcall(omap3_l3_init);
+
+static int __init omap4_l3_init(void)
+{
+	int l, i;
+	struct omap_hwmod *oh[3];
+	struct omap_device *od;
+	char oh_name[L3_MODULES_MAX_LEN];
+
+	/*
+	 * To avoid code running on other OMAPs in
+	 * multi-omap builds
+	 */
+	if (!(cpu_is_omap44xx()))
+		return -ENODEV;
+
+	for (i = 0; i < L3_MODULES; i++) {
+		l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1);
+
+		oh[i] = omap_hwmod_lookup(oh_name);
+		if (!(oh[i]))
+			pr_err("could not look up %s\n", oh_name);
+	}
+
+	od = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL,
+						     0, NULL, 0, 0);
+
+	WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
+
+	return IS_ERR(od) ? PTR_ERR(od) : 0;
+}
+postcore_initcall(omap4_l3_init);
+
+#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
+
+static struct resource omap2cam_resources[] = {
+	{
+		.start		= OMAP24XX_CAMERA_BASE,
+		.end		= OMAP24XX_CAMERA_BASE + 0xfff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_24XX_CAM_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device omap2cam_device = {
+	.name		= "omap24xxcam",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap2cam_resources),
+	.resource	= omap2cam_resources,
+};
+#endif
+
+static struct resource omap3isp_resources[] = {
+	{
+		.start		= OMAP3430_ISP_BASE,
+		.end		= OMAP3430_ISP_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_CCP2_BASE,
+		.end		= OMAP3430_ISP_CCP2_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_CCDC_BASE,
+		.end		= OMAP3430_ISP_CCDC_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_HIST_BASE,
+		.end		= OMAP3430_ISP_HIST_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_H3A_BASE,
+		.end		= OMAP3430_ISP_H3A_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_PREV_BASE,
+		.end		= OMAP3430_ISP_PREV_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_RESZ_BASE,
+		.end		= OMAP3430_ISP_RESZ_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_SBL_BASE,
+		.end		= OMAP3430_ISP_SBL_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_CSI2A_REGS1_BASE,
+		.end		= OMAP3430_ISP_CSI2A_REGS1_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_CSIPHY2_BASE,
+		.end		= OMAP3430_ISP_CSIPHY2_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3630_ISP_CSI2A_REGS2_BASE,
+		.end		= OMAP3630_ISP_CSI2A_REGS2_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3630_ISP_CSI2C_REGS1_BASE,
+		.end		= OMAP3630_ISP_CSI2C_REGS1_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3630_ISP_CSIPHY1_BASE,
+		.end		= OMAP3630_ISP_CSIPHY1_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3630_ISP_CSI2C_REGS2_BASE,
+		.end		= OMAP3630_ISP_CSI2C_REGS2_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_34XX_CAM_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device omap3isp_device = {
+	.name		= "omap3isp",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap3isp_resources),
+	.resource	= omap3isp_resources,
+};
+
+int omap3_init_camera(struct isp_platform_data *pdata)
+{
+	omap3isp_device.dev.platform_data = pdata;
+	return platform_device_register(&omap3isp_device);
+}
+
+static inline void omap_init_camera(void)
+{
+#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
+	if (cpu_is_omap24xx())
+		platform_device_register(&omap2cam_device);
+#endif
+}
+
+#if defined(CONFIG_SND_OMAP_SOC_DMIC) || \
+    defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE)
+
+static struct omap_device_pm_latency omap_dmic_latency[] = {
+	{
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func = omap_device_enable_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+static void omap_init_dmic(void)
+{
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+
+	oh = omap_hwmod_lookup("dmic");
+	if (!oh) {
+		printk(KERN_ERR "Could not look up dmic hw_mod\n");
+		return;
+	}
+
+	od = omap_device_build("omap-dmic-dai", -1, oh, NULL, 0,
+				omap_dmic_latency,
+				ARRAY_SIZE(omap_dmic_latency), 0);
+	if (IS_ERR(od))
+		printk(KERN_ERR "Could not build omap_device for omap-dmic-dai\n");
+}
+#else
+static inline void omap_init_dmic(void) {}
+#endif
+
+
+struct omap_device_pm_latency omap_keyboard_latency[] = {
+	{
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func   = omap_device_enable_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+int __init omap4_keyboard_init(struct omap4_keypad_platform_data
+			*sdp4430_keypad_data, struct omap_board_data *bdata)
+{
+	struct omap_device *od;
+	struct omap_hwmod *oh;
+	struct omap4_keypad_platform_data *keypad_data;
+	unsigned int id = -1;
+	char *oh_name = "kbd";
+	char *name = "omap4-keypad";
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up %s\n", oh_name);
+		return -ENODEV;
+	}
+
+	keypad_data = sdp4430_keypad_data;
+
+	od = omap_device_build(name, id, oh, keypad_data,
+			sizeof(struct omap4_keypad_platform_data),
+			omap_keyboard_latency,
+			ARRAY_SIZE(omap_keyboard_latency), 0);
+
+	if (IS_ERR(od)) {
+		WARN(1, "Can't build omap_device for %s:%s.\n",
+						name, oh->name);
+		return PTR_ERR(od);
+	}
+	oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
+
+	return 0;
+}
+
+#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
+static struct omap_device_pm_latency mbox_latencies[] = {
+	[0] = {
+		.activate_func = omap_device_enable_hwmods,
+		.deactivate_func = omap_device_idle_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+static inline void omap_init_mbox(void)
+{
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+
+	oh = omap_hwmod_lookup("mailbox");
+	if (!oh) {
+		pr_err("%s: unable to find hwmod\n", __func__);
+		return;
+	}
+
+	od = omap_device_build("omap-mailbox", -1, oh, NULL, 0,
+				mbox_latencies, ARRAY_SIZE(mbox_latencies), 0);
+	WARN(IS_ERR(od), "%s: could not build device, err %ld\n",
+						__func__, PTR_ERR(od));
+}
+#else
+static inline void omap_init_mbox(void) { }
+#endif /* CONFIG_OMAP_MBOX_FWK */
+
+static inline void omap_init_sti(void) {}
+
+#if defined CONFIG_ARCH_OMAP4
+
+static struct platform_device codec_dmic0 = {
+	.name	= "dmic-codec",
+	.id	= 0,
+};
+
+static struct platform_device codec_dmic1 = {
+	.name	= "dmic-codec",
+	.id	= 1,
+};
+
+static struct platform_device codec_dmic2 = {
+	.name	= "dmic-codec",
+	.id	= 2,
+};
+
+static struct platform_device omap_abe_dai = {
+	.name	= "omap-abe-dai",
+	.id	= -1,
+};
+
+static inline void omap_init_abe(void)
+{
+	platform_device_register(&codec_dmic0);
+	platform_device_register(&codec_dmic1);
+	platform_device_register(&codec_dmic2);
+	platform_device_register(&omap_abe_dai);
+}
+#else
+static inline void omap_init_abe(void) {}
+#endif
+
+#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
+
+static struct platform_device omap_pcm = {
+	.name	= "omap-pcm-audio",
+	.id	= -1,
+};
+
+static struct platform_device omap_soc_audio = {
+	.id	= -1,
+};
+
+/*
+ * Device for the ASoC OMAP4 HDMI machine driver
+ */
+static struct platform_device omap_hdmi_audio = {
+	.name	= "omap4-hdmi-audio",
+	.id	= -1,
+};
+
+/*
+ * OMAP2420 has 2 McBSP ports
+ * OMAP2430 has 5 McBSP ports
+ * OMAP3 has 5 McBSP ports
+ * OMAP4 has 4 McBSP ports
+ */
+OMAP_MCBSP_PLATFORM_DEVICE(1);
+OMAP_MCBSP_PLATFORM_DEVICE(2);
+OMAP_MCBSP_PLATFORM_DEVICE(3);
+OMAP_MCBSP_PLATFORM_DEVICE(4);
+OMAP_MCBSP_PLATFORM_DEVICE(5);
+
+static struct {
+	int machine;
+	const char *name;
+} soc_device_names[] = {
+	{ MACH_TYPE_OMAP3517EVM,	"am3517evm-soc-audio"	},
+	{ MACH_TYPE_IGEP0020,		"igep2-soc-audio"	},
+	{ MACH_TYPE_NOKIA_N810,		"n8x1-soc-audio"	},
+	{ MACH_TYPE_NOKIA_N810_WIMAX,	"n8x1-soc-audio"	},
+	{ MACH_TYPE_OMAP3_BEAGLE,	"omap3beagle-soc-audio"	},
+	{ MACH_TYPE_DEVKIT8000,		"omap3beagle-soc-audio"	},
+	{ MACH_TYPE_OMAP3EVM,		"omap3evm-soc-audio"	},
+	{ MACH_TYPE_OMAP3_PANDORA,	"pandora-soc-audio"	},
+	{ MACH_TYPE_OVERO,		"overo-soc-audio",	},
+	{ MACH_TYPE_CM_T35,		"overo-soc-audio",	},
+	{ MACH_TYPE_NOKIA_RX51,		"rx51-soc-audio",	},
+	{ MACH_TYPE_OMAP_3430SDP,	"sdp3430-soc-audio",	},
+	{ MACH_TYPE_OMAP_4430SDP,	"sdp4430-soc-audio",	},
+	{ MACH_TYPE_OMAP_ZOOM2,		"zoom2-soc-audio",	},
+};
+
+static void omap_init_audio(void)
+{
+<<<<<<<
+	int i;
+
+=======
+	struct omap_hwmod *oh_hdmi;
+	struct omap_device *od_hdmi;
+	char *oh_hdmi_name = "dss_hdmi";
+	char *dev_hdmi_name = "hdmi-audio-dai";
+#if 0
+	if (cpu_is_omap44xx()) {
+		oh_hdmi = omap_hwmod_lookup(oh_hdmi_name);
+		WARN(!oh_hdmi, "%s: could not find omap_hwmod for %s\n",
+			__func__, oh_hdmi_name);
+
+		od_hdmi = omap_device_build(dev_hdmi_name, -1, oh_hdmi, NULL, 0,
+			NULL, 0, false);
+		WARN(IS_ERR(od_hdmi), "%s: could not build omap_device for %s\n",
+			__func__, dev_hdmi_name);
+
+		platform_device_register(&omap_hdmi_audio);
+	}
+#endif
+>>>>>>>
+	platform_device_register(&omap_mcbsp1);
+	platform_device_register(&omap_mcbsp2);
+	if (cpu_is_omap243x() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		platform_device_register(&omap_mcbsp3);
+		platform_device_register(&omap_mcbsp4);
+	}
+	if (cpu_is_omap243x() || cpu_is_omap34xx())
+		platform_device_register(&omap_mcbsp5);
+
+	platform_device_register(&omap_pcm);
+
+	for (i = 0; i < ARRAY_SIZE(soc_device_names); i++) {
+		if (machine_arch_type == soc_device_names[i].machine) {
+			omap_soc_audio.name = soc_device_names[i].name;
+			platform_device_register(&omap_soc_audio);
+			break;
+		}
+	}
+}
+
+#else
+static inline void omap_init_audio(void) {}
+#endif
+
+#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
+		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
+
+static struct omap_device_pm_latency omap_mcpdm_latency[] = {
+	{
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func = omap_device_enable_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+static void omap_init_mcpdm(void)
+{
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+
+	oh = omap_hwmod_lookup("mcpdm");
+	if (!oh) {
+		printk(KERN_ERR "Could not look up mcpdm hw_mod\n");
+		return;
+	}
+
+	od = omap_device_build("omap-mcpdm", -1, oh, NULL, 0,
+				omap_mcpdm_latency,
+				ARRAY_SIZE(omap_mcpdm_latency), 0);
+	if (IS_ERR(od))
+		printk(KERN_ERR "Could not build omap_device for omap-mcpdm-dai\n");
+}
+#else
+static inline void omap_init_mcpdm(void) {}
+#endif
+
+#if defined(CONFIG_SND_OMAP_SOC_ABE_DSP) || \
+	defined(CONFIG_SND_OMAP_SOC_ABE_DSP_MODULE)
+
+static struct omap_device_pm_latency omap_aess_latency[] = {
+	{
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func = omap_device_enable_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+static void omap_init_aess(void)
+{
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+	struct omap4_abe_dsp_pdata *pdata;
+
+	oh = omap_hwmod_lookup("aess");
+	if (!oh) {
+		printk (KERN_ERR "Could not look up aess hw_mod\n");
+		return;
+	}
+
+	pdata = kzalloc(sizeof(struct omap4_abe_dsp_pdata), GFP_KERNEL);
+	if (!pdata) {
+		printk(KERN_ERR "Could not allocate platform data\n");
+		return;
+	}
+
+	/* FIXME: Add correct context loss counter */
+	//pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
+
+	od = omap_device_build("aess", -1, oh, pdata,
+				sizeof(struct omap4_abe_dsp_pdata),
+				omap_aess_latency,
+				ARRAY_SIZE(omap_aess_latency), 0);
+
+	kfree(pdata);
+
+	if (IS_ERR(od))
+		printk(KERN_ERR "Could not build omap_device for omap-aess-audio\n");
+}
+#else
+static inline void omap_init_aess(void) {}
+#endif
+
+#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
+
+#include <plat/mcspi.h>
+
+struct omap_device_pm_latency omap_mcspi_latency[] = {
+	[0] = {
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func   = omap_device_enable_hwmods,
+		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
+{
+	struct omap_device *od;
+	char *name = "omap2_mcspi";
+	struct omap2_mcspi_platform_config *pdata;
+	static int spi_num;
+	struct omap2_mcspi_dev_attr *mcspi_attrib = oh->dev_attr;
+
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		pr_err("Memory allocation for McSPI device failed\n");
+		return -ENOMEM;
+	}
+
+	pdata->num_cs = mcspi_attrib->num_chipselect;
+	switch (oh->class->rev) {
+	case OMAP2_MCSPI_REV:
+	case OMAP3_MCSPI_REV:
+			pdata->regs_offset = 0;
+			break;
+	case OMAP4_MCSPI_REV:
+			pdata->regs_offset = OMAP4_MCSPI_REG_OFFSET;
+			break;
+	default:
+			pr_err("Invalid McSPI Revision value\n");
+			return -EINVAL;
+	}
+
+	spi_num++;
+	od = omap_device_build(name, spi_num, oh, pdata,
+				sizeof(*pdata),	omap_mcspi_latency,
+				ARRAY_SIZE(omap_mcspi_latency), 0);
+	WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n",
+				name, oh->name);
+	kfree(pdata);
+	return 0;
+}
+
+static void omap_init_mcspi(void)
+{
+	omap_hwmod_for_each_by_class("mcspi", omap_mcspi_init, NULL);
+}
+
+#else
+static inline void omap_init_mcspi(void) {}
+#endif
+
+static struct resource omap2_pmu_resource = {
+	.start	= 3,
+	.end	= 3,
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct resource omap3_pmu_resource = {
+	.start	= INT_34XX_BENCH_MPU_EMUL,
+	.end	= INT_34XX_BENCH_MPU_EMUL,
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct platform_device omap_pmu_device = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.num_resources	= 1,
+};
+
+static void omap_init_pmu(void)
+{
+	if (cpu_is_omap24xx())
+		omap_pmu_device.resource = &omap2_pmu_resource;
+	else if (cpu_is_omap34xx())
+		omap_pmu_device.resource = &omap3_pmu_resource;
+	else
+		return;
+
+	platform_device_register(&omap_pmu_device);
+}
+
+
+#if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP2
+static struct resource omap2_sham_resources[] = {
+	{
+		.start	= OMAP24XX_SEC_SHA1MD5_BASE,
+		.end	= OMAP24XX_SEC_SHA1MD5_BASE + 0x64,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_24XX_SHA1MD5,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+static int omap2_sham_resources_sz = ARRAY_SIZE(omap2_sham_resources);
+#else
+#define omap2_sham_resources		NULL
+#define omap2_sham_resources_sz		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct resource omap3_sham_resources[] = {
+	{
+		.start	= OMAP34XX_SEC_SHA1MD5_BASE,
+		.end	= OMAP34XX_SEC_SHA1MD5_BASE + 0x64,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_34XX_SHA1MD52_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= OMAP34XX_DMA_SHA1MD5_RX,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+static int omap3_sham_resources_sz = ARRAY_SIZE(omap3_sham_resources);
+#else
+#define omap3_sham_resources		NULL
+#define omap3_sham_resources_sz		0
+#endif
+
+static struct platform_device sham_device = {
+	.name		= "omap-sham",
+	.id		= -1,
+};
+
+static void omap_init_sham(void)
+{
+	if (cpu_is_omap24xx()) {
+		sham_device.resource = omap2_sham_resources;
+		sham_device.num_resources = omap2_sham_resources_sz;
+	} else if (cpu_is_omap34xx()) {
+		sham_device.resource = omap3_sham_resources;
+		sham_device.num_resources = omap3_sham_resources_sz;
+	} else {
+		pr_err("%s: platform not supported\n", __func__);
+		return;
+	}
+	platform_device_register(&sham_device);
+}
+#else
+static inline void omap_init_sham(void) { }
+#endif
+
+#if defined(CONFIG_CRYPTO_DEV_OMAP_AES) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP2
+static struct resource omap2_aes_resources[] = {
+	{
+		.start	= OMAP24XX_SEC_AES_BASE,
+		.end	= OMAP24XX_SEC_AES_BASE + 0x4C,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP24XX_DMA_AES_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= OMAP24XX_DMA_AES_RX,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+static int omap2_aes_resources_sz = ARRAY_SIZE(omap2_aes_resources);
+#else
+#define omap2_aes_resources		NULL
+#define omap2_aes_resources_sz		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct resource omap3_aes_resources[] = {
+	{
+		.start	= OMAP34XX_SEC_AES_BASE,
+		.end	= OMAP34XX_SEC_AES_BASE + 0x4C,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_DMA_AES2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= OMAP34XX_DMA_AES2_RX,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+static int omap3_aes_resources_sz = ARRAY_SIZE(omap3_aes_resources);
+#else
+#define omap3_aes_resources		NULL
+#define omap3_aes_resources_sz		0
+#endif
+
+static struct platform_device aes_device = {
+	.name		= "omap-aes",
+	.id		= -1,
+};
+
+static void omap_init_aes(void)
+{
+	if (cpu_is_omap24xx()) {
+		aes_device.resource = omap2_aes_resources;
+		aes_device.num_resources = omap2_aes_resources_sz;
+	} else if (cpu_is_omap34xx()) {
+		aes_device.resource = omap3_aes_resources;
+		aes_device.num_resources = omap3_aes_resources_sz;
+	} else {
+		pr_err("%s: platform not supported\n", __func__);
+		return;
+	}
+	platform_device_register(&aes_device);
+}
+
+#else
+static inline void omap_init_aes(void) { }
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
+							*mmc_controller)
+{
+	if ((mmc_controller->slots[0].switch_pin > 0) && \
+		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
+					OMAP_PIN_INPUT_PULLUP);
+	if ((mmc_controller->slots[0].gpio_wp > 0) && \
+		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
+					OMAP_PIN_INPUT_PULLUP);
+
+	omap_mux_init_signal("sdmmc_cmd", 0);
+	omap_mux_init_signal("sdmmc_clki", 0);
+	omap_mux_init_signal("sdmmc_clko", 0);
+	omap_mux_init_signal("sdmmc_dat0", 0);
+	omap_mux_init_signal("sdmmc_dat_dir0", 0);
+	omap_mux_init_signal("sdmmc_cmd_dir", 0);
+	if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
+		omap_mux_init_signal("sdmmc_dat1", 0);
+		omap_mux_init_signal("sdmmc_dat2", 0);
+		omap_mux_init_signal("sdmmc_dat3", 0);
+		omap_mux_init_signal("sdmmc_dat_dir1", 0);
+		omap_mux_init_signal("sdmmc_dat_dir2", 0);
+		omap_mux_init_signal("sdmmc_dat_dir3", 0);
+	}
+
+	/*
+	 * Use internal loop-back in MMC/SDIO Module Input Clock
+	 * selection
+	 */
+	if (mmc_controller->slots[0].internal_clock) {
+		u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+		v |= (1 << 24);
+		omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+	}
+}
+
+void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
+{
+	char *name = "mmci-omap";
+
+	if (!mmc_data[0]) {
+		pr_err("%s fails: Incomplete platform data\n", __func__);
+		return;
+	}
+
+	omap242x_mmc_mux(mmc_data[0]);
+	omap_mmc_add(name, 0, OMAP2_MMC1_BASE, OMAP2420_MMC_SIZE,
+					INT_24XX_MMC_IRQ, mmc_data[0]);
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
+#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430)
+#define OMAP_HDQ_BASE	0x480B2000
+#endif
+static struct resource omap_hdq_resources[] = {
+	{
+		.start		= OMAP_HDQ_BASE,
+		.end		= OMAP_HDQ_BASE + 0x1C,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_24XX_HDQ_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+static struct platform_device omap_hdq_dev = {
+	.name = "omap_hdq",
+	.id = 0,
+	.dev = {
+		.platform_data = NULL,
+	},
+	.num_resources	= ARRAY_SIZE(omap_hdq_resources),
+	.resource	= omap_hdq_resources,
+};
+static inline void omap_hdq_init(void)
+{
+	(void) platform_device_register(&omap_hdq_dev);
+}
+#else
+static inline void omap_hdq_init(void) {}
+#endif
+
+/*---------------------------------------------------------------------------*/
+
+#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
+	defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = {
+};
+#else
+static struct resource omap_vout_resource[2] = {
+};
+#endif
+
+static struct platform_device omap_vout_device = {
+	.name		= "omap_vout",
+	.num_resources	= ARRAY_SIZE(omap_vout_resource),
+	.resource 	= &omap_vout_resource[0],
+	.id		= -1,
+};
+static void omap_init_vout(void)
+{
+	if (platform_device_register(&omap_vout_device) < 0)
+		printk(KERN_ERR "Unable to register OMAP-VOUT device\n");
+}
+#else
+static inline void omap_init_vout(void) {}
+#endif
+
+static struct omap_device_pm_latency omap_drm_latency[] = {
+	[0] = {
+		.deactivate_func	= omap_device_idle_hwmods,
+		.activate_func		= omap_device_enable_hwmods,
+		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+static struct platform_device omap_omaplfb_device = {
+	.name		= "omaplfb",
+	.id		= -1,
+};
+
+
+static void omap_init_gpu(void)
+{
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+	int max_omap_drm_hwmod_name_len = 16;
+	char oh_name[max_omap_drm_hwmod_name_len];
+	int l;
+	struct gpu_platform_data *pdata;
+	char *name = "omapdrm_pvr";
+
+	l = snprintf(oh_name, max_omap_drm_hwmod_name_len,
+		     "gpu");
+	WARN(l >= max_omap_drm_hwmod_name_len,
+		"String buffer overflow in GPU device setup\n");
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+
+		pr_err("omap_init_gpu: Could not look up %s\n", oh_name);
+		return;
+	}
+
+	pdata = kzalloc(sizeof(struct gpu_platform_data),
+					GFP_KERNEL);
+	if (!pdata) {
+		pr_err("omap_init_gpu: Platform data memory allocation failed\n");
+		return;
+	}
+
+	pdata->device_enable = omap_device_enable;
+	pdata->device_idle = omap_device_idle;
+	pdata->device_shutdown = omap_device_shutdown;
+
+	od = omap_device_build(name, 0, oh, pdata,
+			     sizeof(struct gpu_platform_data),
+			     omap_drm_latency, ARRAY_SIZE(omap_drm_latency), 0);
+	WARN(IS_ERR(od), "Could not build omap_device for %s %s\n",
+	     name, oh_name);
+
+	kfree(pdata);
+	platform_device_register(&omap_omaplfb_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int __init omap2_init_devices(void)
+{
+	/*
+	 * please keep these calls, and their implementations above,
+	 * in alphabetical order so they're easier to sort through.
+	 */
+	omap_init_abe();
+	omap_init_aess();
+	omap_init_audio();
+	omap_init_dmic();
+	omap_init_mcpdm();
+	omap_init_camera();
+	omap_init_mbox();
+	omap_init_mcspi();
+	omap_init_pmu();
+	omap_hdq_init();
+	omap_init_sti();
+	omap_init_sham();
+	omap_init_aes();
+	omap_init_vout();
+	omap_init_gpu();
+
+	return 0;
+}
+arch_initcall(omap2_init_devices);
+
+#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
+static struct omap_device_pm_latency omap_wdt_latency[] = {
+	[0] = {
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func   = omap_device_enable_hwmods,
+		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+static int __init omap_init_wdt(void)
+{
+	int id = -1;
+	struct omap_device *od;
+	struct omap_hwmod *oh;
+	char *oh_name = "wd_timer2";
+	char *dev_name = "omap_wdt";
+
+	if (!cpu_class_is_omap2())
+		return 0;
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up wd_timer%d hwmod\n", id);
+		return -EINVAL;
+	}
+
+	od = omap_device_build(dev_name, id, oh, NULL, 0,
+				omap_wdt_latency,
+				ARRAY_SIZE(omap_wdt_latency), 0);
+	WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n",
+				dev_name, oh->name);
+	return 0;
+}
+subsys_initcall(omap_init_wdt);
+#endif
diff --git a/debian.linaro/ci/rr-cache/f5615ad0da79534d9fd4f6cbd714c4fb37335145/preimage b/debian.linaro/ci/rr-cache/f5615ad0da79534d9fd4f6cbd714c4fb37335145/preimage
new file mode 100644
index 0000000..60d2ad3
--- /dev/null
+++ b/debian.linaro/ci/rr-cache/f5615ad0da79534d9fd4f6cbd714c4fb37335145/preimage
@@ -0,0 +1,1137 @@
+/*
+ * sdp4430.c  --  SoC audio for TI OMAP4430 SDP
+ *
+ * Author: Misael Lopez Cruz <misael.lopez@ti.com>
+ *         Liam Girdwood <lrg@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/twl6040.h>
+#include <linux/i2c.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+#include <sound/pcm_params.h>
+#include <sound/soc-dapm.h>
+#include <sound/soc-dsp.h>
+
+#include <asm/mach-types.h>
+#include <plat/hardware.h>
+#include <plat/mux.h>
+#include <plat/mcbsp.h>
+
+#include "omap-mcpdm.h"
+#include "omap-pcm.h"
+#include "omap-abe.h"
+#include "omap-abe-dsp.h"
+#include "omap-mcbsp.h"
+#include "omap-dmic.h"
+#include "../codecs/twl6040.h"
+
+static int twl6040_power_mode;
+static int mcbsp_cfg;
+static struct snd_soc_codec *twl6040_codec;
+static struct i2c_client *tps6130x_client;
+static struct i2c_board_info tps6130x_hwmon_info = {
+	I2C_BOARD_INFO("tps6130x", 0x33),
+};
+
+/* configure the TPS6130x Handsfree Boost Converter */
+static int sdp4430_tps6130x_configure(void)
+{
+	u8 data[2];
+
+	data[0] = 0x01;
+	data[1] = 0x60;
+	if (i2c_master_send(tps6130x_client, data, 2) != 2)
+		printk(KERN_ERR "I2C write to TPS6130x failed\n");
+
+	data[0] = 0x02;
+	if (i2c_master_send(tps6130x_client, data, 2) != 2)
+		printk(KERN_ERR "I2C write to TPS6130x failed\n");
+	return 0;
+}
+
+static int sdp4430_modem_mcbsp_configure(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params, int flag)
+{
+	int ret = 0;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_pcm_substream *modem_substream[2];
+	struct snd_soc_pcm_runtime *modem_rtd;
+	int channels;
+
+	if (flag) {
+		modem_substream[substream->stream] =
+		snd_soc_get_dai_substream(rtd->card,
+						OMAP_ABE_BE_MM_EXT1,
+						substream->stream);
+		if (unlikely(modem_substream[substream->stream] == NULL))
+			return -ENODEV;
+
+		modem_rtd =
+			modem_substream[substream->stream]->private_data;
+
+		if (!mcbsp_cfg) {
+			/* Set cpu DAI configuration */
+			ret = snd_soc_dai_set_fmt(modem_rtd->cpu_dai,
+					SND_SOC_DAIFMT_I2S |
+					SND_SOC_DAIFMT_NB_NF |
+					SND_SOC_DAIFMT_CBM_CFM);
+			if (unlikely(ret < 0)) {
+				printk(KERN_ERR "can't set Modem cpu DAI configuration\n");
+				goto exit;
+				} else {
+					mcbsp_cfg = 1;
+			}
+		}
+
+		if (params != NULL) {
+			/* Configure McBSP internal buffer usage */
+			/* this need to be done for playback and/or record */
+			channels = params_channels(params);
+			if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+				omap_mcbsp_set_rx_threshold(
+					modem_rtd->cpu_dai->id, channels);
+			else
+				omap_mcbsp_set_tx_threshold(
+					modem_rtd->cpu_dai->id, channels);
+		}
+	} else {
+		mcbsp_cfg = 0;
+	}
+
+exit:
+	return ret;
+}
+
+static int sdp4430_modem_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	int ret;
+
+	ret = sdp4430_modem_mcbsp_configure(substream, params, 1);
+	if (ret)
+		printk(KERN_ERR "can't set modem cpu DAI configuration\n");
+
+	return ret;
+}
+
+static int sdp4430_modem_hw_free(struct snd_pcm_substream *substream)
+{
+	int ret;
+
+	ret = sdp4430_modem_mcbsp_configure(substream, NULL, 0);
+	if (ret)
+		printk(KERN_ERR "can't clear modem cpu DAI configuration\n");
+
+	return ret;
+}
+
+static struct snd_soc_ops sdp4430_modem_ops = {
+	.hw_params = sdp4430_modem_hw_params,
+	.hw_free = sdp4430_modem_hw_free,
+};
+static int sdp4430_mcpdm_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	int clk_id, freq, ret;
+
+	if (twl6040_power_mode) {
+		clk_id = TWL6040_SYSCLK_SEL_HPPLL;
+		freq = 38400000;
+	} else {
+		clk_id = TWL6040_SYSCLK_SEL_LPPLL;
+		freq = 32768;
+	}
+
+	/* set the codec mclk */
+	ret = snd_soc_dai_set_sysclk(codec_dai, clk_id, freq,
+				SND_SOC_CLOCK_IN);
+	if (ret)
+		printk(KERN_ERR "can't set codec system clock\n");
+
+	return ret;
+}
+
+static struct snd_soc_ops sdp4430_mcpdm_ops = {
+	.hw_params = sdp4430_mcpdm_hw_params,
+};
+
+static int sdp4430_mcbsp_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	int ret = 0;
+	unsigned int be_id, channels;
+
+        be_id = rtd->dai_link->be_id;
+
+	if (be_id == OMAP_ABE_DAI_BT_VX) {
+		ret = snd_soc_dai_set_fmt(cpu_dai,
+			SND_SOC_DAIFMT_DSP_B |
+				SND_SOC_DAIFMT_NB_IF |
+			SND_SOC_DAIFMT_CBM_CFM);
+	} else {
+		/* Set cpu DAI configuration */
+		ret = snd_soc_dai_set_fmt(cpu_dai,
+				  SND_SOC_DAIFMT_I2S |
+			SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	}
+
+	if (ret < 0) {
+		printk(KERN_ERR "can't set cpu DAI configuration\n");
+		return ret;
+	}
+
+	if (params != NULL) {
+		/* Configure McBSP internal buffer usage */
+		/* this need to be done for playback and/or record */
+		channels = params_channels(params);
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			omap_mcbsp_set_tx_threshold(
+				cpu_dai->id, channels);
+		else
+			omap_mcbsp_set_rx_threshold(
+				cpu_dai->id, channels);
+	}
+
+	/*
+	 * TODO: where does this clock come from (external source??) -
+	 * do we need to enable it.
+	 */
+	/* Set McBSP clock to external */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_SYSCLK_CLKS_FCLK,
+				     64 * params_rate(params),
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		printk(KERN_ERR "can't set cpu system clock\n");
+
+	return ret;
+}
+
+static struct snd_soc_ops sdp4430_mcbsp_ops = {
+	.hw_params = sdp4430_mcbsp_hw_params,
+};
+
+static int sdp4430_dmic_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	int ret = 0;
+
+	ret = snd_soc_dai_set_sysclk(cpu_dai, OMAP_DMIC_SYSCLK_PAD_CLKS,
+				     19200000, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set DMIC cpu system clock\n");
+		return ret;
+	}
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, OMAP_DMIC_CLKDIV, 8);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set DMIC cpu clock divider\n");
+		return ret;
+	}
+	return 0;
+}
+
+static struct snd_soc_ops sdp4430_dmic_ops = {
+	.hw_params = sdp4430_dmic_hw_params,
+};
+static int mcbsp_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
+			struct snd_pcm_hw_params *params)
+{
+	struct snd_interval *channels = hw_param_interval(params,
+                                       SNDRV_PCM_HW_PARAM_CHANNELS);
+	unsigned int be_id = rtd->dai_link->be_id;
+
+	if (be_id == OMAP_ABE_DAI_MM_FM)
+		channels->min = 2;
+	else if (be_id == OMAP_ABE_DAI_BT_VX)
+		channels->min = 2;
+	snd_mask_set(&params->masks[SNDRV_PCM_HW_PARAM_FORMAT -
+	                            SNDRV_PCM_HW_PARAM_FIRST_MASK],
+	                            SNDRV_PCM_FORMAT_S16_LE);
+	return 0;
+}
+
+static int dmic_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
+			struct snd_pcm_hw_params *params)
+{
+	struct snd_interval *rate = hw_param_interval(params,
+			SNDRV_PCM_HW_PARAM_RATE);
+
+	/* The ABE will covert the FE rate to 96k */
+	rate->min = rate->max = 96000;
+
+	snd_mask_set(&params->masks[SNDRV_PCM_HW_PARAM_FORMAT -
+	                            SNDRV_PCM_HW_PARAM_FIRST_MASK],
+	                            SNDRV_PCM_FORMAT_S32_LE);
+	return 0;
+}
+
+/* Headset jack */
+static struct snd_soc_jack hs_jack;
+
+/*Headset jack detection DAPM pins */
+static struct snd_soc_jack_pin hs_jack_pins[] = {
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	},
+	{
+		.pin = "Headset Stereophone",
+		.mask = SND_JACK_HEADPHONE,
+	},
+};
+
+static int sdp4430_get_power_mode(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = twl6040_power_mode;
+	return 0;
+}
+
+static int sdp4430_set_power_mode(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	if (twl6040_power_mode == ucontrol->value.integer.value[0])
+		return 0;
+
+	twl6040_power_mode = ucontrol->value.integer.value[0];
+	abe_dsp_set_power_mode(twl6040_power_mode);
+
+	return 1;
+}
+
+static const char *power_texts[] = {"Low-Power", "High-Performance"};
+
+static const struct soc_enum sdp4430_enum[] = {
+	SOC_ENUM_SINGLE_EXT(2, power_texts),
+};
+
+static const struct snd_kcontrol_new sdp4430_controls[] = {
+	SOC_ENUM_EXT("TWL6040 Power Mode", sdp4430_enum[0],
+		sdp4430_get_power_mode, sdp4430_set_power_mode),
+};
+/* SDP4430 machine DAPM */
+static const struct snd_soc_dapm_widget sdp4430_twl6040_dapm_widgets[] = {
+	SND_SOC_DAPM_MIC("Ext Mic", NULL),
+	SND_SOC_DAPM_SPK("Ext Spk", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_HP("Headset Stereophone", NULL),
+	SND_SOC_DAPM_SPK("Earphone Spk", NULL),
+	SND_SOC_DAPM_INPUT("FM Stereo In"),
+
+	SND_SOC_DAPM_MIC("Digital Mic 0", NULL),
+	SND_SOC_DAPM_MIC("Digital Mic 1", NULL),
+	SND_SOC_DAPM_MIC("Digital Mic 2", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	/* External Mics: MAINMIC, SUBMIC with bias*/
+	{"MAINMIC", NULL, "Main Mic Bias"},
+	{"SUBMIC", NULL, "Main Mic Bias"},
+	{"Main Mic Bias", NULL, "Ext Mic"},
+
+	/* External Speakers: HFL, HFR */
+	{"Ext Spk", NULL, "HFL"},
+	{"Ext Spk", NULL, "HFR"},
+
+	/* Headset Mic: HSMIC with bias */
+	{"HSMIC", NULL, "Headset Mic Bias"},
+	{"Headset Mic Bias", NULL, "Headset Mic"},
+
+	/* Headset Stereophone (Headphone): HSOL, HSOR */
+	{"Headset Stereophone", NULL, "HSOL"},
+	{"Headset Stereophone", NULL, "HSOR"},
+
+	/* Earphone speaker */
+	{"Earphone Spk", NULL, "EP"},
+
+	/* Aux/FM Stereo In: AFML, AFMR */
+	{"AFML", NULL, "FM Stereo In"},
+	{"AFMR", NULL, "FM Stereo In"},
+
+	/* Digital Mics: DMic0, DMic1, DMic2 with bias */
+	{"DMIC0", NULL, "Digital Mic1 Bias"},
+	{"Digital Mic1 Bias", NULL, "Digital Mic 0"},
+
+	{"DMIC1", NULL, "Digital Mic1 Bias"},
+	{"Digital Mic1 Bias", NULL, "Digital Mic 1"},
+
+	{"DMIC2", NULL, "Digital Mic1 Bias"},
+	{"Digital Mic1 Bias", NULL, "Digital Mic 2"},
+};
+
+static int sdp4430_set_pdm_dl1_gains(struct snd_soc_dapm_context *dapm)
+{
+	int output, val;
+
+	if (snd_soc_dapm_get_pin_power(dapm, "Earphone Spk")) {
+		output = OMAP_ABE_DL1_EARPIECE;
+	} else if (snd_soc_dapm_get_pin_power(dapm, "Headset Stereophone")) {
+		val = snd_soc_read(twl6040_codec, TWL6040_REG_HSLCTL);
+		if (val & TWL6040_HSDACMODE)
+			/* HSDACL in LP mode */
+			output = OMAP_ABE_DL1_HEADSET_LP;
+		else
+			/* HSDACL in HP mode */
+			output = OMAP_ABE_DL1_HEADSET_HP;
+	} else {
+		output = OMAP_ABE_DL1_NO_PDM;
+	}
+
+	return omap_abe_set_dl1_output(output);
+}
+
+static int sdp4430_twl6040_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct twl6040 *twl6040 = codec->control_data;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+	int hsotrim, left_offset, right_offset, mode;
+	int ret;
+
+	/* Add SDP4430 specific controls */
+	ret = snd_soc_add_controls(codec, sdp4430_controls,
+				ARRAY_SIZE(sdp4430_controls));
+	if (ret)
+		return ret;
+
+	/* Add SDP4430 specific widgets */
+	ret = snd_soc_dapm_new_controls(dapm, sdp4430_twl6040_dapm_widgets,
+				ARRAY_SIZE(sdp4430_twl6040_dapm_widgets));
+	if (ret)
+		return ret;
+
+	/* Set up SDP4430 specific audio path audio_map */
+	snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
+
+	/* SDP4430 connected pins */
+	snd_soc_dapm_enable_pin(dapm, "Ext Mic");
+	snd_soc_dapm_enable_pin(dapm, "Ext Spk");
+	snd_soc_dapm_enable_pin(dapm, "AFML");
+	snd_soc_dapm_enable_pin(dapm, "AFMR");
+	snd_soc_dapm_enable_pin(dapm, "Headset Mic");
+	snd_soc_dapm_enable_pin(dapm, "Headset Stereophone");
+
+	/* allow audio paths from the audio modem to run during suspend */
+	snd_soc_dapm_ignore_suspend(dapm, "Ext Mic");
+	snd_soc_dapm_ignore_suspend(dapm, "Ext Spk");
+	snd_soc_dapm_ignore_suspend(dapm, "AFML");
+	snd_soc_dapm_ignore_suspend(dapm, "AFMR");
+	snd_soc_dapm_ignore_suspend(dapm, "Headset Mic");
+	snd_soc_dapm_ignore_suspend(dapm, "Headset Stereophone");
+	snd_soc_dapm_ignore_suspend(dapm, "Digital Mic 0");
+	snd_soc_dapm_ignore_suspend(dapm, "Digital Mic 1");
+	snd_soc_dapm_ignore_suspend(dapm, "Digital Mic 2");
+
+	ret = snd_soc_dapm_sync(dapm);
+	if (ret)
+		return ret;
+
+	/* Headset jack detection */
+	ret = snd_soc_jack_new(codec, "Headset Jack",
+				SND_JACK_HEADSET, &hs_jack);
+	if (ret)
+		return ret;
+
+	ret = snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins),
+				hs_jack_pins);
+
+	if (machine_is_omap_4430sdp())
+		twl6040_hs_jack_detect(codec, &hs_jack, SND_JACK_HEADSET);
+	else
+		snd_soc_jack_report(&hs_jack, SND_JACK_HEADSET, SND_JACK_HEADSET);
+
+	/* DC offset cancellation computation */
+	hsotrim = snd_soc_read(codec, TWL6040_REG_HSOTRIM);
+	right_offset = (hsotrim & TWL6040_HSRO) >> TWL6040_HSRO_OFFSET;
+	left_offset = hsotrim & TWL6040_HSLO;
+
+	if ((twl6040_get_revid(twl6040) == TWL6040_REV_ES1_0) ||
+		(twl6040_get_revid(twl6040) == TWL6040_REV_ES1_1))
+		/* For ES under ES_1.0 and 1.1 HS step is 2 mV */
+		mode = 2;
+	else
+		/* For ES_1.3 HS step is 1 mV */
+		mode = 1;
+
+	abe_dsp_set_hs_offset(left_offset, right_offset, mode);
+
+	/* don't wait before switching of HS power */
+	rtd->pmdown_time = 0;
+
+	return ret;
+}
+
+static int sdp4430_twl6040_dl2_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	int hfotrim, left_offset, right_offset;
+
+	/* DC offset cancellation computation */
+	hfotrim = snd_soc_read(codec, TWL6040_REG_HFOTRIM);
+	right_offset = (hfotrim & TWL6040_HFRO) >> TWL6040_HFRO_OFFSET;
+	left_offset = hfotrim & TWL6040_HFLO;
+
+	abe_dsp_set_hf_offset(left_offset, right_offset);
+
+	/* don't wait before switching of HF power */
+	rtd->pmdown_time = 0;
+	return 0;
+}
+
+static int sdp4430_twl6040_fe_init(struct snd_soc_pcm_runtime *rtd)
+{
+
+	/* don't wait before switching of FE power */
+	rtd->pmdown_time = 0;
+
+	return 0;
+}
+
+static int sdp4430_bt_init(struct snd_soc_pcm_runtime *rtd)
+{
+
+	/* don't wait before switching of BT power */
+	rtd->pmdown_time = 0;
+
+	return 0;
+}
+
+static int sdp4430_stream_event(struct snd_soc_dapm_context *dapm, int event)
+{
+	/*
+	 * set DL1 gains dynamically according to the active output
+	 * (Headset, Earpiece) and HSDAC power mode
+	 */
+	return sdp4430_set_pdm_dl1_gains(dapm);
+}
+
+/* SDP4430 digital microphones DAPM */
+static const struct snd_soc_dapm_widget sdp4430_dmic_dapm_widgets[] = {
+	SND_SOC_DAPM_MIC("Digital Mic Legacy", NULL),
+};
+
+static const struct snd_soc_dapm_route dmic_audio_map[] = {
+	{"DMic", NULL, "Digital Mic1 Bias"},
+	{"Digital Mic1 Bias", NULL, "Digital Mic Legacy"},
+};
+
+static int sdp4430_dmic_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+	int ret;
+
+	ret = snd_soc_dapm_new_controls(dapm, sdp4430_dmic_dapm_widgets,
+				ARRAY_SIZE(sdp4430_dmic_dapm_widgets));
+	if (ret)
+		return ret;
+
+	ret = snd_soc_dapm_add_routes(dapm, dmic_audio_map,
+				ARRAY_SIZE(dmic_audio_map));
+	if (ret)
+		return ret;
+
+	snd_soc_dapm_enable_pin(dapm, "Digital Mic Legacy");
+
+	ret = snd_soc_dapm_sync(dapm);
+
+	return ret;
+}
+
+/* TODO: make this a separate BT CODEC driver or DUMMY */
+static struct snd_soc_dai_driver dai[] = {
+{
+	.name = "Bluetooth",
+	.playback = {
+		.stream_name = "BT Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
+					SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.capture = {
+		.stream_name = "BT Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
+					SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	},
+},
+/* TODO: make this a separate FM CODEC driver or DUMMY */
+{
+	.name = "FM Digital",
+	.playback = {
+		.stream_name = "FM Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.capture = {
+		.stream_name = "FM Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	},
+},
+{
+	.name = "HDMI",
+	.playback = {
+		.stream_name = "HDMI Playback",
+		.channels_min = 2,
+		.channels_max = 8,
+		.rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
+				SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
+	},
+},
+};
+
+struct snd_soc_dsp_link fe_media = {
+	.playback	= true,
+	.capture	= true,
+	.trigger =
+		{SND_SOC_DSP_TRIGGER_BESPOKE, SND_SOC_DSP_TRIGGER_BESPOKE},
+};
+
+struct snd_soc_dsp_link fe_media_capture = {
+	.capture	= true,
+	.trigger =
+		{SND_SOC_DSP_TRIGGER_BESPOKE, SND_SOC_DSP_TRIGGER_BESPOKE},
+};
+
+struct snd_soc_dsp_link fe_tones = {
+	.playback	= true,
+	.trigger =
+		{SND_SOC_DSP_TRIGGER_BESPOKE, SND_SOC_DSP_TRIGGER_BESPOKE},
+};
+
+struct snd_soc_dsp_link fe_vib = {
+	.playback	= true,
+	.trigger =
+		{SND_SOC_DSP_TRIGGER_BESPOKE, SND_SOC_DSP_TRIGGER_BESPOKE},
+};
+
+struct snd_soc_dsp_link fe_modem = {
+	.playback	= true,
+	.capture	= true,
+	.trigger =
+		{SND_SOC_DSP_TRIGGER_BESPOKE, SND_SOC_DSP_TRIGGER_BESPOKE},
+};
+
+struct snd_soc_dsp_link fe_lp_media = {
+	.playback	= true,
+	.trigger =
+		{SND_SOC_DSP_TRIGGER_BESPOKE, SND_SOC_DSP_TRIGGER_BESPOKE},
+};
+
+static struct snd_soc_dai_link sdp4430_dai[] = {
+
+/*
+ * Frontend DAIs - i.e. userspace visible interfaces (ALSA PCMs)
+ */
+
+	{
+		.name = "SDP4430 Media",
+		.stream_name = "Multimedia",
+
+		/* ABE components - MM-UL & MM_DL */
+		.cpu_dai_name = "MultiMedia1",
+		.platform_name = "omap-pcm-audio",
+
+		.dynamic = 1, /* BE is dynamic */
+		.init = sdp4430_twl6040_fe_init,
+		.dsp_link = &fe_media,
+	},
+	{
+		.name = "SDP4430 Media Capture",
+		.stream_name = "Multimedia Capture",
+
+		/* ABE components - MM-UL2 */
+		.cpu_dai_name = "MultiMedia2",
+		.platform_name = "omap-pcm-audio",
+
+		.dynamic = 1, /* BE is dynamic */
+		.dsp_link = &fe_media_capture,
+	},
+	{
+		.name = "SDP4430 Voice",
+		.stream_name = "Voice",
+
+		/* ABE components - VX-UL & VX-DL */
+		.cpu_dai_name = "Voice",
+		.platform_name = "omap-pcm-audio",
+
+		.dynamic = 1, /* BE is dynamic */
+		.dsp_link = &fe_media,
+		.no_host_mode = SND_SOC_DAI_LINK_OPT_HOST,
+	},
+	{
+		.name = "SDP4430 Tones Playback",
+		.stream_name = "Tone Playback",
+
+		/* ABE components - TONES_DL */
+		.cpu_dai_name = "Tones",
+		.platform_name = "omap-pcm-audio",
+
+		.dynamic = 1, /* BE is dynamic */
+		.dsp_link = &fe_tones,
+	},
+	{
+		.name = "SDP4430 Vibra Playback",
+		.stream_name = "VIB-DL",
+
+		/* ABE components - DMIC UL 2 */
+		.cpu_dai_name = "Vibra",
+		.platform_name = "omap-pcm-audio",
+
+		.dynamic = 1, /* BE is dynamic */
+		.dsp_link = &fe_vib,
+	},
+	{
+		.name = "SDP4430 MODEM",
+		.stream_name = "MODEM",
+
+		/* ABE components - MODEM <-> McBSP2 */
+		.cpu_dai_name = "MODEM",
+		.platform_name = "aess",
+
+		.dynamic = 1, /* BE is dynamic */
+		.init = sdp4430_twl6040_fe_init,
+		.dsp_link = &fe_modem,
+		.ops = &sdp4430_modem_ops,
+		.no_host_mode = SND_SOC_DAI_LINK_NO_HOST,
+		.ignore_suspend = 1,
+	},
+	{
+		.name = "SDP4430 Media LP",
+		.stream_name = "Multimedia",
+
+		/* ABE components - MM-DL (mmap) */
+		.cpu_dai_name = "MultiMedia1 LP",
+		.platform_name = "aess",
+
+		.dynamic = 1, /* BE is dynamic */
+		.dsp_link = &fe_lp_media,
+	},
+	{
+		.name = "Legacy McBSP",
+		.stream_name = "Multimedia",
+
+		/* ABE components - MCBSP2 - MM-EXT */
+		.cpu_dai_name = "omap-mcbsp-dai.1",
+		.platform_name = "omap-pcm-audio",
+
+		/* FM */
+		.codec_dai_name = "FM Digital",
+
+		.no_codec = 1, /* TODO: have a dummy CODEC */
+		.ops = &sdp4430_mcbsp_ops,
+		.ignore_suspend = 1,
+	},
+	{
+		.name = "Legacy McPDM",
+		.stream_name = "Headset Playback",
+
+		/* ABE components - DL1 */
+		.cpu_dai_name = "mcpdm-dl",
+		.platform_name = "omap-pcm-audio",
+
+		/* Phoenix - DL1 DAC */
+		.codec_dai_name =  "twl6040-legacy",
+		.codec_name = "twl6040-codec",
+
+		.ops = &sdp4430_mcpdm_ops,
+		.ignore_suspend = 1,
+	},
+#if 0
+	{
+		.name = "SPDIF",
+		.stream_name = "SPDIF",
+		.cpu_dai_name = "omap-mcasp-dai.0",
+		.codec_dai_name = "dit-hifi",	/* dummy s/pdif transciever
+						 * driver */
+		.platform_name = "omap-pcm-audio",
+		.ignore_suspend = 1,
+		.no_codec = 1,
+	},
+#endif
+	{
+		.name = "Legacy DMIC",
+		.stream_name = "DMIC Capture",
+
+		/* ABE components - DMIC0 */
+		.cpu_dai_name = "omap-dmic-dai-0",
+		.platform_name = "omap-pcm-audio",
+
+		/* DMIC codec */
+		.codec_dai_name = "dmic-hifi",
+		.codec_name = "dmic-codec.0",
+
+		.init = sdp4430_dmic_init,
+		.ops = &sdp4430_dmic_ops,
+	},
+
+/*
+ * Backend DAIs - i.e. dynamically matched interfaces, invisible to userspace.
+ * Matched to above interfaces at runtime, based upon use case.
+ */
+
+	{
+		.name = OMAP_ABE_BE_PDM_DL1,
+		.stream_name = "HS Playback",
+
+		/* ABE components - DL1 */
+		.cpu_dai_name = "mcpdm-dl1",
+		.platform_name = "aess",
+
+		/* Phoenix - DL1 DAC */
+		.codec_dai_name =  "twl6040-dl1",
+		.codec_name = "twl6040-codec",
+
+		.no_pcm = 1, /* don't create ALSA pcm for this */
+		.init = sdp4430_twl6040_init,
+		.ops = &sdp4430_mcpdm_ops,
+		.be_id = OMAP_ABE_DAI_PDM_DL1,
+		.ignore_suspend = 1,
+	},
+	{
+		.name = OMAP_ABE_BE_PDM_UL1,
+		.stream_name = "Analog Capture",
+
+		/* ABE components - UL1 */
+		.cpu_dai_name = "mcpdm-ul1",
+		.platform_name = "aess",
+
+		/* Phoenix - UL ADC */
+		.codec_dai_name =  "twl6040-ul",
+		.codec_name = "twl6040-codec",
+
+		.no_pcm = 1, /* don't create ALSA pcm for this */
+		.ops = &sdp4430_mcpdm_ops,
+		.be_id = OMAP_ABE_DAI_PDM_UL,
+		.ignore_suspend = 1,
+	},
+	{
+		.name = OMAP_ABE_BE_PDM_DL2,
+		.stream_name = "HF Playback",
+
+		/* ABE components - DL2 */
+		.cpu_dai_name = "mcpdm-dl2",
+		.platform_name = "aess",
+
+		/* Phoenix - DL2 DAC */
+		.codec_dai_name =  "twl6040-dl2",
+		.codec_name = "twl6040-codec",
+
+		.no_pcm = 1, /* don't create ALSA pcm for this */
+		.init = sdp4430_twl6040_dl2_init,
+		.ops = &sdp4430_mcpdm_ops,
+		.be_id = OMAP_ABE_DAI_PDM_DL2,
+		.ignore_suspend = 1,
+	},
+	{
+		.name = OMAP_ABE_BE_PDM_VIB,
+		.stream_name = "Vibra",
+
+		/* ABE components - VIB1 DL */
+		.cpu_dai_name = "mcpdm-vib",
+		.platform_name = "aess",
+
+		/* Phoenix - PDM to PWM */
+		.codec_dai_name =  "twl6040-vib",
+		.codec_name = "twl6040-codec",
+
+		.no_pcm = 1, /* don't create ALSA pcm for this */
+		.ops = &sdp4430_mcpdm_ops,
+		.be_id = OMAP_ABE_DAI_PDM_VIB,
+	},
+	{
+		.name = OMAP_ABE_BE_BT_VX_UL,
+		.stream_name = "BT Capture",
+
+		/* ABE components - MCBSP1 - BT-VX */
+		.cpu_dai_name = "omap-mcbsp-dai.0",
+		.platform_name = "aess",
+
+		/* Bluetooth */
+		.codec_dai_name = "Bluetooth",
+
+		.no_pcm = 1, /* don't create ALSA pcm for this */
+		.no_codec = 1, /* TODO: have a dummy CODEC */
+		.be_hw_params_fixup = mcbsp_be_hw_params_fixup,
+		.ops = &sdp4430_mcbsp_ops,
+		.be_id = OMAP_ABE_DAI_BT_VX,
+		.ignore_suspend = 1,
+	},
+	{
+		.name = OMAP_ABE_BE_BT_VX_DL,
+		.stream_name = "BT Playback",
+
+		/* ABE components - MCBSP1 - BT-VX */
+		.cpu_dai_name = "omap-mcbsp-dai.0",
+		.platform_name = "aess",
+
+		/* Bluetooth */
+		.codec_dai_name = "Bluetooth",
+
+		.no_pcm = 1, /* don't create ALSA pcm for this */
+		.no_codec = 1, /* TODO: have a dummy CODEC */
+		.init = sdp4430_bt_init,
+		.be_hw_params_fixup = mcbsp_be_hw_params_fixup,
+		.ops = &sdp4430_mcbsp_ops,
+		.be_id = OMAP_ABE_DAI_BT_VX,
+		.ignore_suspend = 1,
+	},
+	{
+		.name = OMAP_ABE_BE_MM_EXT0,
+		.stream_name = "FM",
+
+		/* ABE components - MCBSP2 - MM-EXT */
+		.cpu_dai_name = "omap-mcbsp-dai.1",
+		.platform_name = "aess",
+
+		/* FM */
+		.codec_dai_name = "FM Digital",
+
+		.no_pcm = 1, /* don't create ALSA pcm for this */
+		.no_codec = 1, /* TODO: have a dummy CODEC */
+		.be_hw_params_fixup = mcbsp_be_hw_params_fixup,
+		.ops = &sdp4430_mcbsp_ops,
+		.be_id = OMAP_ABE_DAI_MM_FM,
+	},
+	{
+		.name = OMAP_ABE_BE_MM_EXT1,
+		.stream_name = "MODEM",
+
+		/* ABE components - MCBSP2 - MM-EXT */
+		.cpu_dai_name = "omap-mcbsp-dai.1",
+		.platform_name = "aess",
+
+		/* MODEM */
+		.codec_dai_name = "MODEM",
+
+		.no_pcm = 1, /* don't create ALSA pcm for this */
+		.no_codec = 1, /* TODO: have a dummy CODEC */
+		.be_hw_params_fixup = mcbsp_be_hw_params_fixup,
+		.ops = &sdp4430_mcbsp_ops,
+		.be_id = OMAP_ABE_DAI_MODEM,
+		.ignore_suspend = 1,
+	},
+	{
+		.name = OMAP_ABE_BE_DMIC0,
+		.stream_name = "DMIC0 Capture",
+
+		/* ABE components - DMIC UL 1 */
+		.cpu_dai_name = "omap-dmic-abe-dai-0",
+		.platform_name = "aess",
+
+		/* DMIC 0 */
+		.codec_dai_name = "dmic-hifi",
+		.codec_name = "dmic-codec.0",
+		.ops = &sdp4430_dmic_ops,
+
+		.no_pcm = 1, /* don't create ALSA pcm for this */
+		.be_hw_params_fixup = dmic_be_hw_params_fixup,
+		.be_id = OMAP_ABE_DAI_DMIC0,
+	},
+	{
+		.name = OMAP_ABE_BE_DMIC1,
+		.stream_name = "DMIC1 Capture",
+
+		/* ABE components - DMIC UL 1 */
+		.cpu_dai_name = "omap-dmic-abe-dai-1",
+		.platform_name = "aess",
+
+		/* DMIC 1 */
+		.codec_dai_name = "dmic-hifi",
+		.codec_name = "dmic-codec.1",
+		.ops = &sdp4430_dmic_ops,
+
+		.no_pcm = 1, /* don't create ALSA pcm for this */
+		.be_hw_params_fixup = dmic_be_hw_params_fixup,
+		.be_id = OMAP_ABE_DAI_DMIC1,
+	},
+	{
+		.name = OMAP_ABE_BE_DMIC2,
+		.stream_name = "DMIC2 Capture",
+
+		/* ABE components - DMIC UL 2 */
+		.cpu_dai_name = "omap-dmic-abe-dai-2",
+		.platform_name = "aess",
+
+		/* DMIC 2 */
+		.codec_dai_name = "dmic-hifi",
+		.codec_name = "dmic-codec.2",
+		.ops = &sdp4430_dmic_ops,
+
+		.no_pcm = 1, /* don't create ALSA pcm for this */
+		.be_hw_params_fixup = dmic_be_hw_params_fixup,
+		.be_id = OMAP_ABE_DAI_DMIC2,
+	},
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_sdp4430 = {
+	.driver_name = "OMAP4",
+	.long_name = "TI OMAP4 Board",
+	.dai_link = sdp4430_dai,
+	.num_links = ARRAY_SIZE(sdp4430_dai),
+
+	.stream_event = sdp4430_stream_event,
+};
+
+<<<<<<<
+static int __devinit sdp4430_soc_probe(struct platform_device *pdev)
+=======
+static struct platform_device *sdp4430_snd_device;
+static struct i2c_adapter *adapter;
+
+static int __init sdp4430_soc_init(void)
+>>>>>>>
+{
+	struct snd_soc_card *card = &snd_soc_sdp4430;
+	int ret;
+
+<<<<<<<
+	if (!machine_is_omap_4430sdp() && !machine_is_omap4_panda()) {
+		pr_debug("Not SDP4430 or PandaBoard!\n");
+		return -ENODEV;
+	}
+	printk(KERN_INFO "SDP4430 SoC init\n");
+	if (machine_is_omap_4430sdp())
+		snd_soc_sdp4430.name = "SDP4430";
+	else if (machine_is_omap4_panda())
+		snd_soc_sdp4430.name = "Panda";
+=======
+	pr_info("SDP4430 SoC init\n");
+
+	card->dev = &pdev->dev;
+>>>>>>>
+
+	ret = snd_soc_register_card(card);
+	if (ret) {
+		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+			ret);
+		return ret;
+	}
+
+<<<<<<<
+	ret = snd_soc_register_dais(&sdp4430_snd_device->dev, dai, ARRAY_SIZE(dai));
+	if (ret < 0)
+		goto err_dai;
+	platform_set_drvdata(sdp4430_snd_device, &snd_soc_sdp4430);
+
+	ret = platform_device_add(sdp4430_snd_device);
+	if (ret)
+		goto err_dev;
+
+	adapter = i2c_get_adapter(1);
+	if (!adapter) {
+		printk(KERN_ERR "can't get i2c adapter\n");
+		ret = -ENODEV;
+		goto err_adap;
+	}
+
+	tps6130x_client = i2c_new_device(adapter, &tps6130x_hwmon_info);
+	if (!tps6130x_client) {
+		printk(KERN_ERR "can't add i2c device\n");
+		ret = -ENODEV;
+		goto err_i2c;
+	}
+
+	/* Only configure the TPS6130x on SDP4430 */
+	if (machine_is_omap_4430sdp())
+		sdp4430_tps6130x_configure();
+
+	twl6040_codec = snd_soc_card_get_codec(&snd_soc_sdp4430,
+					"twl6040-codec");
+=======
+	return 0;
+}
+
+static int __devexit sdp4430_soc_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+	snd_soc_unregister_card(card);
+>>>>>>>
+
+	return 0;
+}
+
+<<<<<<<
+err_i2c:
+	i2c_put_adapter(adapter);
+err_adap:
+	platform_device_del(sdp4430_snd_device);
+err_dev:
+	snd_soc_unregister_dais(&sdp4430_snd_device->dev, ARRAY_SIZE(dai));
+err_dai:
+	platform_device_put(sdp4430_snd_device);
+	return ret;
+=======
+static struct platform_driver sdp4430_driver = {
+	.driver = {
+		.name = "sdp4430-soc-audio",
+		.owner = THIS_MODULE,
+	},
+
+	.probe = sdp4430_soc_probe,
+	.remove = __devexit_p(sdp4430_soc_remove),
+};
+
+static int __init sdp4430_soc_init(void)
+{
+	return platform_driver_register(&sdp4430_driver);
+>>>>>>>
+}
+module_init(sdp4430_soc_init);
+
+static void __exit sdp4430_soc_exit(void)
+{
+<<<<<<<
+	platform_device_unregister(sdp4430_snd_device);
+	snd_soc_unregister_dais(&sdp4430_snd_device->dev, ARRAY_SIZE(dai));
+	i2c_unregister_device(tps6130x_client);
+	i2c_put_adapter(adapter);
+=======
+	platform_driver_unregister(&sdp4430_driver);
+>>>>>>>
+}
+module_exit(sdp4430_soc_exit);
+
+MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
+MODULE_DESCRIPTION("ALSA SoC SDP4430");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sdp4430-soc-audio");