aboutsummaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts
AgeCommit message (Collapse)Author
2020-06-18arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2Adam Ford
LDO1 and LDO2 settings are wrong and case the voltage to go above the maximum level of 2.15V permitted by the SoC to 3.0V. This patch is based on work done on the i.MX8M Mini-EVK which utilizes the same fix. Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-18arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage rangeRobin Gong
Correct ldo1 voltage range from wrong high group(3.0V~3.3V) to low group (1.6V~1.9V) because the ldo1 should be 1.8V. Actually, two voltage groups have been supported at bd718x7-regulator driver, hence, just corrrect the voltage range to 1.6V~3.3V. For ldo2@0.8V, correct voltage range too. Otherwise, ldo1 would be kept @3.0V and ldo2@0.9V which violate i.mx8mn datasheet as the below warning log in kernel: [ 0.995524] LDO1: Bringing 1800000uV into 3000000-3000000uV [ 0.999196] LDO2: Bringing 800000uV into 900000-900000uV Fixes: 3e44dd09736d ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support") Cc: stable@vger.kernel.org Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-18arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage rangeRobin Gong
Correct ldo1 voltage range from wrong high group(3.0V~3.3V) to low group (1.6V~1.9V) because the ldo1 should be 1.8V. Actually, two voltage groups have been supported at bd718x7-regulator driver, hence, just corrrect the voltage range to 1.6V~3.3V. For ldo2@0.8V, correct voltage range too. Otherwise, ldo1 would be kept @3.0V and ldo2@0.9V which violate i.mx8mm datasheet as the below warning log in kernel: [ 0.995524] LDO1: Bringing 1800000uV into 3000000-3000000uV [ 0.999196] LDO2: Bringing 800000uV into 900000-900000uV Fixes: 78cc25fa265d ("arm64: dts: imx8mm-evk: Add BD71847 PMIC") Cc: stable@vger.kernel.org Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-08Merge tag 'iommu-updates-v5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: "A big part of this is a change in how devices get connected to IOMMUs in the core code. It contains the change from the old add_device() / remove_device() to the new probe_device() / release_device() call-backs. As a result functionality that was previously in the IOMMU drivers has been moved to the IOMMU core code, including IOMMU group allocation for each device. The reason for this change was to get more robust allocation of default domains for the iommu groups. A couple of fixes were necessary after this was merged into the IOMMU tree, but there are no known bugs left. The last fix is applied on-top of the merge commit for the topic branches. Other than that change, we have: - Removal of the driver private domain handling in the Intel VT-d driver. This was fragile code and I am glad it is gone now. - More Intel VT-d updates from Lu Baolu: - Nested Shared Virtual Addressing (SVA) support to the Intel VT-d driver - Replacement of the Intel SVM interfaces to the common IOMMU SVA API - SVA Page Request draining support - ARM-SMMU Updates from Will: - Avoid mapping reserved MMIO space on SMMUv3, so that it can be claimed by the PMU driver - Use xarray to manage ASIDs on SMMUv3 - Reword confusing shutdown message - DT compatible string updates - Allow implementations to override the default domain type - A new IOMMU driver for the Allwinner Sun50i platform - Support for ATS gets disabled for untrusted devices (like Thunderbolt devices). This includes a PCI patch, acked by Bjorn. - Some cleanups to the AMD IOMMU driver to make more use of IOMMU core features. - Unification of some printk formats in the Intel and AMD IOMMU drivers and in the IOVA code. - Updates for DT bindings - A number of smaller fixes and cleanups. * tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (109 commits) iommu: Check for deferred attach in iommu_group_do_dma_attach() iommu/amd: Remove redundant devid checks iommu/amd: Store dev_data as device iommu private data iommu/amd: Merge private header files iommu/amd: Remove PD_DMA_OPS_MASK iommu/amd: Consolidate domain allocation/freeing iommu/amd: Free page-table in protection_domain_free() iommu/amd: Allocate page-table in protection_domain_init() iommu/amd: Let free_pagetable() not rely on domain->pt_root iommu/amd: Unexport get_dev_data() iommu/vt-d: Fix compile warning iommu/vt-d: Remove real DMA lookup in find_domain iommu/vt-d: Allocate domain info for real DMA sub-devices iommu/vt-d: Only clear real DMA device's context entries iommu: Remove iommu_sva_ops::mm_exit() uacce: Remove mm_exit() op iommu/sun50i: Constify sun50i_iommu_ops iommu/hyper-v: Constify hyperv_ir_domain_ops iommu/vt-d: Use pci_ats_supported() iommu/arm-smmu-v3: Use pci_ats_supported() ...
2020-06-07Merge tag 'char-misc-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ...
2020-06-07Merge tag 'usb-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY driver updates from Greg KH: "Here are the large set of USB and PHY driver updates for 5.8-rc1. Nothing huge, just lots of little things: - USB gadget fixes and additions all over the place - new PHY drivers - PHY driver fixes and updates - XHCI driver updates - musb driver updates - more USB-serial driver ids added - various USB quirks added - thunderbolt minor updates and fixes - typec updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits) usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings" Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180" Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver" USB: serial: ch341: fix lockup of devices with limited prescaler USB: serial: ch341: add basis for quirk detection CDC-ACM: heed quirk also in error handling USB: serial: option: add Telit LE910C1-EUX compositions usb: musb: Fix runtime PM imbalance on error usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle usb: musb: use true for 'use_dma' usb: musb: start session in resume for host port usb: musb: return -ESHUTDOWN in urb when three-strikes error happened USB: serial: qcserial: add DW5816e QDL support thunderbolt: Add trivial .shutdown usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML ...
2020-06-04Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ...
2020-06-02Merge tag 'zynqmp-dt-for-v5.8' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
arm/dt arm64: dt: ZynqMP DT fixes for v5.8 - Add AES mode and fix GIC node * tag 'zynqmp-dt-for-v5.8' of https://github.com/Xilinx/linux-xlnx: arm64: zynqmp: Fix GIC compatible property arm64: zynqmp: Add Xilinx AES node Link: https://lore.kernel.org/r/ad25cfb0-156c-9bf6-a7b8-e30a7a859135@monstr.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-02Merge branches 'arm/msm', 'arm/allwinner', 'arm/smmu', 'x86/vt-d', ↵Joerg Roedel
'hyper-v', 'core' and 'x86/amd' into next
2020-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26Merge tag 'v5.7-next-dts64.2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt8183: - add PMIC mt6358 - add MMC node mt2712: - enable APDMA for the uart node - add ethernet gmac node mmsys: - change node name to syscon as mmsys no longer represents only clocks but also the DRM subsystem * tag 'v5.7-next-dts64.2' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: dts: mt6358: add PMIC MT6358 related nodes arm64: dts: mt6797: Fix mmsys node name arm64: dts: mt8173: Fix mmsys node name Link: https://lore.kernel.org/r/7c9f85c7-5b13-38e3-7a1f-a3cd6461b095@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-26Merge tag 'imx-dt64-5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree changes: - New support of Beacon i.MX8m-Mini development kit. - Add secondary cpus supply on imx8mm-evk and imx8mn-ddr4-evk for completeness. - Add thermal zones for imx8mp and lx2160a, PMIC thermal zone for imx8qxp-mek board. - Update VDD_ARM 1.2GHz setpoint voltage for imx8mn. - Add SRC device interrupt for i.MX8 SoCs. - Use 0.9V for VDD_GPU on imx8mq-librem5-devkit, since there is no need to support overclocking to 1GHz. - Update imx8qxp SCU device to use MU channel with less interrupt triggering, one RX interrupt for a RX and one TX interrupt for a TX. - Specify DMA channels for LS1028A DSPI controllers. - Add QE and DS26522 device support for fsl-ls1043a-rdb board. - Misc random update and cleanup. * tag 'imx-dt64-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (25 commits) arm64: dts: Add ds26522 node to dts to ls1043ardb arm64: dts: add qe node to ls1043ardb arm64: dts: ls1028a: sl28: keep switch port names consistent arm64: dts: imx8mp: Add src node interrupts arm64: dts: imx8mq: Add src node interrupts arm64: dts: imx8m: assign clocks for A53 arm64: dts: freescale: sl28: enable LPUART1 arm64: dts: ls1043a-rdb: add compatible for board arm64: dts: imx8mp: add "fsl,imx6sx-fec" compatible string arm64: dts: imx8qxp-mek: Do not use underscore in node name arm64: dts: fsl: add fsl,extts-fifo property for fman ptp arm64: dts: imx8mn: Update VDD_ARM 1.2GHz setpoint voltage arm64: dts: lx2160a: add more thermal zone support arm64: dts: imx8qxp-mek: Add PMIC thermal zone support arm64: dts: imx8qxp-mek: Sort labels alphabetically arm64: dts: imx8mm: specify #sound-dai-cells for SAI nodes arm64: dts: imx8qxp: support scu mailbox channel arm64: dts: imx8mp: Add thermal zones support arm64: dts: ls1012a: Add QSPI node properties arm64: dts: imx: Add Beacon i.MX8m-Mini development kit ... Link: https://lore.kernel.org/r/20200523032516.11016-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-26Merge tag 'tegra-for-5.8-arm64-dt-v2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.8-rc1 This contains a couple of fixes for minor issues, enables XUDC support on Tegra194, and enables EMC frequency scaling and video capture on Tegra210. * tag 'tegra-for-5.8-arm64-dt-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 arm64: tegra: Make the RTC a wakeup source on Jetson TX2 arm64: tegra: Enable VI I2C on Jetson Nano arm64: tegra: Fix flag for 64-bit resources in 'ranges' property arm64: tegra: Add Tegra VI CSI support in device tree arm64: tegra: Add reset-cells to memory controller arm64: tegra: Fix SOR powergate clocks and reset arm64: tegra: Allow the PMIC RTC to wakeup Jetson Xavier arm64: tegra: Fix ethernet phy-mode for Jetson Xavier arm64: tegra: Hook up EMC cooling device arm64: tegra: Add external memory controller node for Tegra210 arm64: tegra: Add XUDC node on Tegra194 arm64: tegra: Kill off "simple-panel" compatibles Link: https://lore.kernel.org/r/20200522142846.2376224-3-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-26Merge tag 'amlogic-dt64' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.8 Highlights: - new boards :Beelink GT-King Pro (G12B SoC), Smartlabs SML-5442TW (S905D), Hardkernel ODROID-C4 (SM1) - audio: support for GX-family SoCs - audio: internal DAC support - use the new USB control driver for GXL and GXM * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (33 commits) arm64: dts: meson-g12b-gtking-pro: add initial device-tree dt-bindings: arm: amlogic: add support for the Beelink GT-King Pro arm64: dts: meson-g12b-gtking: add initial device-tree dt-bindings: arm: amlogic: add support for the Beelink GT-King arm64: dts: meson: convert ugoos-am6 to common w400 dtsi arm64: dts: meson: add ethernet interrupt to wetek dtsi arm64: dts: meson: add support for the Smartlabs SML-5442TW dt-bindings: arm: amlogic: add support for the Smartlabs SML-5442TW dt-bindings: add vendor prefix for Smartlabs LLC arm64: dts: meson: g12: add internal DAC glue arm64: dts: meson: g12: add internal DAC arm64: dts: meson: libretech-pc: add internal DAC support arm64: dts: meson: libretech-ac: add internal DAC support arm64: dts: meson: libretech-cc: add internal DAC support arm64: dts: meson: p230-q200: add internal DAC support arm64: dts: meson: gxl: add acodec support arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4 dt-bindings: arm: amlogic: add odroid-c4 bindings arm64: dts: meson-sm1: add cpu thermal nodes arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsi ... Link: https://lore.kernel.org/r/5ec6f56a.1c69fb81.fc5d5.9ca6@mx.google.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-25Merge tag 'usb-for-v5.8' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.8 merge window Rather busy cycle. We have a total 99 non-merge commits going into v5.8 merge window. The majority of the changes are in dwc3 this around (31.7% of all changes). It's composed mostly Thinh's recent updates to get dwc3 to behave correctly with stream transfers. We have also have Roger's for Keystone platforms and Neil's updates for the meson glue layer. Apart from those, we have the usual set of non-critical fixes, new device IDs, spelling fixes all over the place. Signed-off-by: Felipe Balbi <balbi@kernel.org> * tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (99 commits) usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML usb: dwc3: gadget: Check for prepared TRBs usb: gadget: Fix issue with config_ep_by_speed function usb: cdns3: ep0: delete the redundant status stage usb: dwc2: Update Core Reset programming flow. usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe() usb: gadget: fix potential double-free in m66592_probe. usb: cdns3: Fix runtime PM imbalance on error usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check usb: dwc3: Increase timeout for CmdAct cleared by device controller USB: dummy-hcd: use configurable endpoint naming scheme usb: cdns3: gadget: assign interrupt number to USB gadget structure usb: gadget: core: sync interrupt before unbind the udc arm64: dts: qcom: sc7180: Add interconnect properties for USB arm64: dts: qcom: sdm845: Add interconnect properties for USB dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver ARM: dts: at91: Remove the USB EP child node dt-bindings: usb: atmel: Mark EP child node as deprecated ...
2020-05-25arm64: dts: qcom: sc7180: Add interconnect properties for USBSandeep Maheswaram
Populate USB DT nodes with interconnect properties. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-25arm64: dts: qcom: sdm845: Add interconnect properties for USBSandeep Maheswaram
Populate USB DT nodes with interconnect properties. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-25arm64: dts: amlogic: use the new USB control driver for GXL and GXMMartin Blumenstingl
Add the correcly architectured USB Glue node and adapt all the Amlogic GXL and GXM board to the new organization. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The MSCC bug fix in 'net' had to be slightly adjusted because the register accesses are done slightly differently in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23arm: dts: mt2712: add uart APDMA to device treeLong Cheng
1. add uart APDMA controller device node 2. add uart 0/1/2/3/4/5 DMA function Signed-off-by: Long Cheng <long.cheng@mediatek.com> Link: https://lore.kernel.org/r/1556336193-15198-3-git-send-email-long.cheng@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-05-23arm64: dts: mt8183: add mmc nodejjian zhou
Add mmc DTS node to the mt8183 and mt8183-evb. Signed-off-by: Jjian Zhou <jjian.zhou-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> Link: https://lore.kernel.org/r/1554888341-5249-1-git-send-email-jjian.zhou@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-05-23arm64: dts: mt2712: add ethernet device nodeBiao Huang
This patch add device node for mt2712 ethernet. Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-05-22ARM64: dts: mediatek: enable ethernet on pumpkin boardsBartosz Golaszewski
Add remaining properties to the ethernet node and enable it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22ARM64: dts: mediatek: add ethernet pins for pumpkin boardsBartosz Golaszewski
Setup the pin control for the Ethernet MAC. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22ARM64: dts: mediatek: add an alias for ethernet0 for pumpkin boardsBartosz Golaszewski
Add the ethernet0 alias for ethernet so that u-boot can find this node and fill in the MAC address. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22ARM64: dts: mediatek: add the ethernet node to mt8516.dtsiBartosz Golaszewski
Add the Ethernet MAC node to mt8516.dtsi. This defines parameters common to all the boards based on this SoC. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22ARM64: dts: mediatek: add pericfg syscon to mt8516.dtsiBartosz Golaszewski
This adds support for the PERICFG register range as a syscon. This will soon be used by the MediaTek Ethernet MAC driver for NIC configuration. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1Jon Hunter
The RTC found on the MAX77620 PMIC can be used as a wakeup source on Jetson Nano and TX1, which is useful to wake the system from suspend at a given time. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-22Merge branch 'v5.7-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/fixes * 'v5.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: cmdq: return send msg error code arm64: dts: mt8173: fix vcodec-enc clock Link: https://lore.kernel.org/r/33a0556a-e2a3-7f0b-b09b-4516642a4bfe@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'v5.8-rockchip-dts64-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New soc variant the rk3326 which is essentially a px30 with only one display controller and a new board using it, the Odroid Advance Go. sdcard regulator for the rockpro64 and a lot of devicetree fixes making the dt-binding check a lot happier. * tag 'v5.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (22 commits) arm64: dts: rockchip: fix pinctrl-names for gpio-leds node on rk3326-odroid-go2 arm64: dts: rockchip: fix pd_tcpc0 and pd_tcpc1 node position on rk3399 arm64: dts: rockchip: add bus-width properties to mmc nodes for px30 arm64: dts: rockchip: remove disable-wp from rk3308-roc-cc emmc node arm64: dts: rockchip: rename and label gpio-led subnodes arm64: dts: rockchip: fix defines in pd_vio node for rk3399 arm64: dts: rockchip: fix &pinctrl phy sub nodename for rk3399-orangepi arm64: dts: rockchip: fix rtl8211e nodename for rk3399-orangepi arm64: dts: rockchip: fix &pinctrl phy sub nodename for rk3399-nanopi4 arm64: dts: rockchip: fix rtl8211e nodename for rk3399-nanopi4 arm64: dts: rockchip: fix rtl8211f nodename for rk3328 Beelink A1 arm64: dts: rockchip: fix phy nodename for rk3328 include: dt-bindings: rockchip: remove unused defines arm64: dts: rockchip: replace RK_FUNC defines in rk3326-odroid-go2 arm64: dts: rockchip: Define the rockchip Video Decoder node on rk3399 arm64: dts: rockchip: remove #sound-dai-cells from &spdif node of rk3399-hugsun-x99.dts arm64: dts: rockchip: remove #sound-dai-cells from &i2s1 node of rk3399-pinebook-pro.dts arm64: dts: rockchip: add Odroid Advance Go dt-bindings: Add binding for Hardkernel Odroid Go Advance arm64: dts: rockchip: add core devicetree for rk3326 ... Link: https://lore.kernel.org/r/1970481.V9vR1fIhX2@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'mvebu-dt64-5.8-1' of git://git.infradead.org/linux-mvebu into arm/dtArnd Bergmann
mvebu dt64 for 5.8 (part 1) Armada 3720 based SoC: + Fix PCIe support allowing to use Compex wifi cards + Turris MOX board: - fix SFP binding - forbid SDR104 on SDIO to pass electromagnetic interference certifications + uDPU board: add i2c recovery support Armada 8040 based SoC: SolidRun 8040: update phy interface * tag 'mvebu-dt64-5.8-1' of git://git.infradead.org/linux-mvebu: arm64: dts: armada-3720-turris-mox: fix SFP binding arm64: dts: armada-3720-turris-mox: forbid SDR104 on SDIO for FCC purposes arm64: dts: add uDPU i2c bus recovery arm64: dts: marvell: drop i2c timeout-ms property arm64: dts: marvell: armada-37xx: Move PCIe max-link-speed property arm64: dts: marvell: armada-37xx: Move PCIe comphy handle property arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function arm64: dts: update SolidRun Armada 8040 phy interface types Link: https://lore.kernel.org/r/878shmeffd.fsf@FE-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'juno-updates-5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt ARMv8 Juno/Vexpress/Fast Models updates for v5.8 Various miscellaneous device tree source fixes to make them fully binding compliant. It includes fixing various device node names, order of interrupt properties, compatible names, address and size cell fields and their aligment with children nodes as well as moving some fixed devices out of bus node. * tag 'juno-updates-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: juno: Fix SCPI shared mem node name arm64: dts: vexpress: Fix VExpress LED names arm64: dts: juno: Fix GPU interrupt order arm64: dts: fvp/juno: Fix bus node names arm64: dts: fvp: Fix SMMU DT node arm64: dts: fvp/juno: Fix serial node names arm64: dts: juno: Use proper DT node name for USB arm64: dts: fvp: Fix ITS node names and #msi-cells arm64: dts: fvp: Fix GIC child nodes arm64: dts: juno: Fix GIC child nodes arm64: dts: fvp: Fix GIC compatible names arm64: dts: juno: Fix mem-timer arm64: dts: juno: Move fixed devices out of bus node arm64: dts: fvp: Move fixed clocks out of bus node arm64: dts: vexpress: Move fixed devices out of bus node arm64: dts: fvp: Move fixed devices out of bus node arm64: dts: fvp/juno: Fix node address fields Link: https://lore.kernel.org/r/20200519094702.GA32975@bogus Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'qcom-arm64-for-5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for v5.8 For SDM845 this defines the IPA network accelerator and the CCI camera control bus, it defines the required UFS reset and adds WiFi for the Lenovo Yoga C630 and defines GPIO pin names and adds OV8856 and OC7251 camera nodes for DB845c. For SC7180 it adds GPU support, defines the modem remoteproc, adds the IPA network accelerator, Coresight and ETM support, adds cpuidle low power states and updates the CPUs' compatible. For SM8250 it adds regulators from the PM8150, PM8150L and PM8009 and adds voltage corners, it defines the nodes for UFS PHY and controller and finally corrects a typo in the PDC node to make SPMI functional. For MSM8916 I2C1 and I2C5 are defined, a node for the CCI camera control interface bus is added and Coresight is disabled by default to match some product configurations. The Samsung A3U gained display support and Samsung A5U gained touchscreen support. MSM8996 now property describes the power supply chain for the GPU, the CCI camera control interface bus is added and the DB820c has the regulators of the secondary PMIC defined. For QCS404 USB PHYs and controllers are defined and wired up for the EVB. SDM630/SDM660 platform support is added and the Xiaomi Redmi Note 7 defined. It also contains a number of changes throughout to improve DT binding compliance. * tag 'qcom-arm64-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (68 commits) arm64: dts: qcom: sc7180: Correct the pdc interrupt ranges arm64: dts: qcom: sc7180: add IPA information arm64: dts: qcom: sc7180: Fix ETMv4 power management patch arm64: dts: qcom: sc7180: Add A618 gpu dt blob dt-bindings: arm-smmu: Add sc7180 compatible string arm64: dts: qcom: msm8996: Make GPU node control GPU_GX GDSC arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc arm64: dts: qcom: apq8016-sbc: merge -pins.dtsi into main .dtsi arm64: dts: qcom: msm8916: move gpu opp table to gpu node arm64: dts: qcom: msm8916: avoid using _ in node names arm64: dts: qcom: c630: Specify UFS device reset arm64: dts: qcom: c630: Add WiFi node arm64: dts: qcom: msm8916-samsung-a3u: add nodes for display panel arm64: dts: qcom: db820c: Fix invalid pm8994 supplies arm64: dts: qcom: db820c: Add pmi8994 RPM regulators arm64: dts: qcom: msm8916: Disable coresight by default arm64: dts: qcom: sc7180: Add "no-map" to cmd_db reserved area arm64: dts: qcom: msm8916-samsung-a5u: Add touchscreen arm64: dts: qcom: msm8916-samsung-a2015: Add touchscreen regulator arm64: dts: qcom: msm8916: Add blsp_i2c5 ... Link: https://lore.kernel.org/r/20200519052528.1249950-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'uniphier-dt64-v5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM64 SoC DT updates for v5.8 - add DMA controller nodes - add Akebi96 board support * tag 'uniphier-dt64-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: Add support for Akebi96 dt-bindings: arm: Add Akebi96 board support arm64: dts: uniphier: add #address-cells and #size-cells to SPI nodes arm64: dts: uniphier: Stabilize Ethernet RGMII mode of PXs3 ref board arm64: dts: uniphier: Add ethernet aliases arm64: dts: uniphier: Add XDMAC node Link: https://lore.kernel.org/r/CAK7LNARUL52pBhg8AD9XeScVqhD8qr2eVEfu4+1v8D+KPyOwNw@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'v5.7-next-dts64' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt MT2712: - replace deprecated compatible for the usb PHY MT6797: - switch to SPDX identifier - add and enable I2C device for x20 development board - add I2C compatible to the binding description MT7622: - add Wi-Fi device and enable it for the Bananpi-R64 MT8173: - add CPU capacities based on Dhryston benchmark - fix DT build warnings - set throtteling range to limitless - add Elm and Hana devices on which several chromebooks are based - add Global Command Queue entries to the users MT8183: - split cpuidle states in two as the clusters have different target residencies * tag 'v5.7-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8173: Add capacity-dmips-mhz attributes arm64: dts: mt2712: use non-empty ranges for usb-phy arm64: dts: mt8173: fix mdp aliases property name arm64: dts: mediatek: Switch to SPDX license identifier for MT6797 SoC arm64: dts: mediatek: Enable I2C support for 96Boards X20 Development board arm64: dts: mediatek: Add I2C support for MT6797 SoC dt-bindings: i2c: Document I2C controller binding for MT6797 SoC arm64: dts: mt8173: fix cooling device range arm64: dts: mediatek: add mt8173 elm and hana board arm64: dts: mt8173: fix unit name warnings arm64: dts: mt8173: add uart aliases dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana arm64: dts: mt8183: adjust cpuidle target residency arm64: dts: mt8173: Add gce setting in mmsys and display node arm64: dts: mt7622: add built-in Wi-Fi device nodes Link: https://lore.kernel.org/r/2794a8db-c14f-ac34-9e28-9f3700db6c4c@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'sunxi-dt-for-5.8-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual number of patches to improve the Allwinner Device Tree support, including: - Support for the IOMMU on the H6 - Support for cpufreq / thermal throttling on the H6 - Support for the mailbox on the A64, A83t, H3, H5 and H6 - New boards: A20-OLinuXino-LIME-eMMC * tag 'sunxi-dt-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (23 commits) arm64: dts: allwinner: h6: Add IOMMU arm64: dts: allwinner: h6: Enable CPU opp tables for Tanix TX6 arm64: dts: allwinner: h6: add voltage range to OPP table arm64: dts: allwinner: sun50i-a64: Add missing address/size-cells arm64: dts: allwinner: h6: Enable CPU opp tables for Pine H64 arm64: dts: allwinner: Sort Pine H64 device-tree nodes arm64: dts: allwinner: h6: Enable CPU opp tables for Orange Pi 3 arm64: dts: allwinner: h6: Enable CPU opp tables for Beelink GS1 arm64: dts: allwinner: h6: Add CPU Operating Performance Points table arm64: dts: allwinner: h6: Add thermal trip points/cooling map arm64: dts: allwinner: h6: Add clock to CPU cores arm64: allwinner: h6: orangepi-lite2: Support BT+WIFI combo module arm64: dts: allwinner: h6: orangepi: Disable OTG mode arm64: dts: allwinner: h6: orangepi: Add gpio power supply ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity arm64: dts: allwinner: h6: Add msgbox node arm64: dts: allwinner: a64: Add msgbox node ARM: dts: sunxi: h3/h5: Add msgbox node ARM: dts: sunxi: a83t: Add msgbox node ARM: dts: sun8i-h3: add opp table for mali gpu ... Link: https://lore.kernel.org/r/cfa66bd9-f74c-4614-9ea5-9ef8546cc571.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'ti-k3-dt-for-v5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt Texas Instruments K3 SoC DT updates for v5.8 - Add DSS support for both AM65x and J721e - Add watchdog support for J721e - Add EHRPWM support for AM65x - Add Thermal support for AM65x * tag 'ti-k3-dt-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-j721e-main: Add main domain watchdog entries arm64: dts: ti: k3-am65-main: Add ehrpwm nodes arm64: dts: ti: am654: Add thermal zones arm64: dts: ti: am65-wakeup: Add VTM node arm64: dts: ti: k3-j721e-common-proc-board: add assigned clks for DSS arm64: dts: ti: k3-j721e-main: Add DSS node arm64: dts: ti: am654: Add DSS node Link: https://lore.kernel.org/r/7484d3c9-323f-36a3-f0df-1287586f356d@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'renesas-arm-dt-for-v5.8-tag2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.8 (take two) - Initial support for the Renesas RZ/G1H SoC on the iWave RainboW Qseven SOM (G21M) and board (G21D), - Support for the AISTARVISION MIPI Adapter V2.1 camera board on the Silicon Linux EK874 RZ/G2E evaluation kit. * tag 'renesas-arm-dt-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION MIPI Adapter V2.1 ARM: dts: r8a7742: Add GPIO nodes ARM: dts: r8a7742: Add [H]SCIF{A|B} support ARM: dts: r8a7742: Add IRQC support ARM: dts: r8a7742-iwg21d-q7: Add iWave G21D-Q7 board based on RZ/G1H ARM: dts: r8a7742-iwg21m: Add iWave RZ/G1H Qseven SOM ARM: dts: r8a7742: Initial SoC device tree clk: renesas: Add r8a7742 CPG Core Clock Definitions dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macros Link: https://lore.kernel.org/r/20200515100547.14671-3-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'hisi-arm64-dt-for-5.8' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann
into arm/dt ARM64: DT: Hisilicon SoCs DT updates for 5.8 - Add pinconf for spi2 and spi3 nodes and increase the drive strength to achieve the max speed for the Hikey960 board - Add CTI nodes for the Hikey620 board * tag 'hisi-arm64-dt-for-5.8' of git://github.com/hisilicon/linux-hisi: arm64: dts: hi6220: Add CTI options arm64: dts: hikey960: pinctrl: Fix spi2/spi3 pinconf Link: https://lore.kernel.org/r/5EBE430E.6090508@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'realtek-dt-for-5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into arm/dt Realtek Arm based SoC DT for v5.8 Add RTD1195, RTD1395 and RTD1619 SoCs as well as Xnano X5 TV box. Clean up memory nodes and /soc ranges. Factor out r-bus and partition it into CRT, Iso, Misc, SB2 and SCPU Wrapper blocks. * tag 'realtek-dt-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek: (35 commits) dt-bindings: reset: rtd1295: Add SB2 reset arm64: dts: realtek: rtd16xx: Add SB2 and SCPU Wrapper syscon nodes arm64: dts: realtek: rtd139x: Add SB2 and SCPU Wrapper syscon nodes arm64: dts: realtek: rtd129x: Add SB2 and SCPU Wrapper syscon nodes ARM: dts: rtd1195: Add SB2 and SCPU Wrapper syscon nodes arm64: dts: realtek: rtd16xx: Add CRT syscon node ARM: dts: rtd1195: Add UART resets ARM: dts: rtd1195: Add reset nodes dt-bindings: reset: Add Realtek RTD1195 ARM: dts: rtd1195: Add CRT syscon node arm64: dts: realtek: rtd16xx: Introduce iso and misc syscon arm64: dts: realtek: rtd139x: Introduce CRT, iso and misc syscon arm64: dts: realtek: rtd129x: Introduce CRT, iso and misc syscon ARM: dts: rtd1195: Introduce iso and misc syscon arm64: dts: realtek: rtd1295: Add Xnano X5 dt-bindings: arm: realtek: Add Xnano X5 dt-bindings: vendor-prefixes: Add Xnano arm64: dts: realtek: rtd16xx: Add memory reservations arm64: dts: realtek: rtd16xx: Carve out boot ROM from memory arm64: dts: realtek: Add RTD1619 SoC and Realtek Mjolnir EVB ... Link: https://lore.kernel.org/r/20200510232158.18477-2-afaerber@suse.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'renesas-arm-dt-for-v5.8-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.8 - USB, UART, PWM, and PCIe support for R-Car M3-W+, - PWM (16-bit Timer Pulse Unit and PWM Timers) support for R-Car M2-W, - Minor fixes and cleanups. * tag 'renesas-arm-dt-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: Fix IOMMU device node names ARM: dts: renesas: Fix IOMMU device node names ARM: dts: shmobile: Update CMT1 compatible values ARM: dts: r8a7791: Add PWM device nodes ARM: dts: r8a7791: Add TPU device node arm64: dts: renesas: r8a77961: Add PCIe device nodes arm64: dts: renesas: r8a77961: Add PWM device nodes arm64: dts: renesas: r8a77961: Add SCIF and HSCIF nodes arm64: dts: renesas: r8a77961: Add USB3.0 device nodes arm64: dts: renesas: r8a77961: Add USB2.0 device nodes Link: https://lore.kernel.org/r/20200430084849.1457-3-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21arm64: dts: Add SC9863A emmc and sd card nodesChunyan Zhang
Add emmc and sd card devicetree nodes for SC9863A. Link: https://lore.kernel.org/r/20200414101636.24503-3-zhang.lyra@gmail.com Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21arm64: dts: Add SC9863A clock nodesChunyan Zhang
add clock devicetree nodes for SC9863A. Link: https://lore.kernel.org/r/20200414101636.24503-2-zhang.lyra@gmail.com Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21arm64: dts: mt6358: add PMIC MT6358 related nodesHsin-Hsiung Wang
add PMIC MT6358 related nodes which is for MT8183 platform Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Link: https://lore.kernel.org/r/1587438012-24832-7-git-send-email-hsin-hsiung.wang@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-05-21arm64: dts: rockchip: fix pinctrl-names for gpio-leds node on rk3326-odroid-go2Johan Jonker
The 'pinctrl-names' property should contain a list of names to the assigned states. The value 'led_pins' in the gpio-leds node on rk3326-odroid-go2 is not a state that is normally used, so change it the common name 'default'. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200519111444.2208-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-20arm64: dts: meson-g12b-gtking-pro: add initial device-treeChristian Hewitt
The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference board with an S922X chip. - 4GB LPDDR4 RAM - 64GB eMMC storage - 10/100/1000 Base-T Ethernet - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) - HDMI 2.1 video - Analogue audio output - 1x RS232 port - 2x USB 2.0 port - 2x USB 3.0 ports - IR receiver - 1x micro SD card slot - 1x Power on/off button Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200520014329.12469-6-christianshewitt@gmail.com
2020-05-20arm64: dts: meson-g12b-gtking: add initial device-treeChristian Hewitt
The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference board with an S922X chip. - 4GB LPDDR4 RAM - 64GB eMMC storage - 10/100/1000 Base-T Ethernet - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) - HDMI 2.1 video - S/PDIF optical output - Analogue audio output - 1x USB 2.0 port - 2x USB 3.0 ports - IR receiver - 1x micro SD card slot Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200520014329.12469-4-christianshewitt@gmail.com
2020-05-20arm64: dts: meson: convert ugoos-am6 to common w400 dtsiChristian Hewitt
Convert the Ugoos AM6 dts into meson-g12b-w400.dtsi, and then create a new AM6 dts that references it. This is in preparation for several new G12B devices that will share the common w400 dtsi. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200520014329.12469-2-christianshewitt@gmail.com
2020-05-20arm64: dts: Add ds26522 node to dts to ls1043ardbZhao Qiang
Add ds26522 node to fsl-ls1043a-rdb.dts Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20arm64: dts: add qe node to ls1043ardbZhao Qiang
Add qe node to fsl-ls1043a.dtsi and fsl-ls1043a-rdb.dts Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 23:12:59 +0000