summaryrefslogtreecommitdiff
path: root/drivers/pci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/host/pci-mvebu.c142
-rw-r--r--drivers/pci/hotplug/Kconfig5
-rw-r--r--drivers/pci/hotplug/pciehp_pci.c9
-rw-r--r--drivers/pci/hotplug/rpadlpar_core.c1
-rw-r--r--drivers/pci/pci-acpi.c15
-rw-r--r--drivers/pci/pcie/Kconfig5
-rw-r--r--drivers/pci/setup-bus.c69
7 files changed, 176 insertions, 70 deletions
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 13a633b1612e..847c10971182 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -86,10 +86,6 @@ struct mvebu_sw_pci_bridge {
u16 secondary_status;
u16 membase;
u16 memlimit;
- u16 prefmembase;
- u16 prefmemlimit;
- u32 prefbaseupper;
- u32 preflimitupper;
u16 iobaseupper;
u16 iolimitupper;
u8 cappointer;
@@ -123,6 +119,10 @@ struct mvebu_pcie_port {
u32 port;
u32 lane;
int devfn;
+ unsigned int mem_target;
+ unsigned int mem_attr;
+ unsigned int io_target;
+ unsigned int io_attr;
struct clk *clk;
struct mvebu_sw_pci_bridge bridge;
struct device_node *dn;
@@ -307,10 +307,9 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
(port->bridge.iolimitupper << 16)) -
iobase);
- mvebu_mbus_add_window_remap_flags(port->name, port->iowin_base,
- port->iowin_size,
- iobase,
- MVEBU_MBUS_PCI_IO);
+ mvebu_mbus_add_window_remap_by_id(port->io_target, port->io_attr,
+ port->iowin_base, port->iowin_size,
+ iobase);
pci_ioremap_io(iobase, port->iowin_base);
}
@@ -342,10 +341,8 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
(((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
port->memwin_base;
- mvebu_mbus_add_window_remap_flags(port->name, port->memwin_base,
- port->memwin_size,
- MVEBU_MBUS_NO_REMAP,
- MVEBU_MBUS_PCI_MEM);
+ mvebu_mbus_add_window_by_id(port->mem_target, port->mem_attr,
+ port->memwin_base, port->memwin_size);
}
/*
@@ -419,15 +416,7 @@ static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port,
break;
case PCI_PREF_MEMORY_BASE:
- *value = (bridge->prefmemlimit << 16 | bridge->prefmembase);
- break;
-
- case PCI_PREF_BASE_UPPER32:
- *value = bridge->prefbaseupper;
- break;
-
- case PCI_PREF_LIMIT_UPPER32:
- *value = bridge->preflimitupper;
+ *value = 0;
break;
case PCI_IO_BASE_UPPER16:
@@ -501,19 +490,6 @@ static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port,
mvebu_pcie_handle_membase_change(port);
break;
- case PCI_PREF_MEMORY_BASE:
- bridge->prefmembase = value & 0xffff;
- bridge->prefmemlimit = value >> 16;
- break;
-
- case PCI_PREF_BASE_UPPER32:
- bridge->prefbaseupper = value;
- break;
-
- case PCI_PREF_LIMIT_UPPER32:
- bridge->preflimitupper = value;
- break;
-
case PCI_IO_BASE_UPPER16:
bridge->iobaseupper = value & 0xffff;
bridge->iolimitupper = value >> 16;
@@ -661,6 +637,8 @@ static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
for (i = 0; i < pcie->nports; i++) {
struct mvebu_pcie_port *port = &pcie->ports[i];
+ if (!port->base)
+ continue;
mvebu_pcie_setup_hw(port);
}
@@ -755,12 +733,54 @@ mvebu_pcie_map_registers(struct platform_device *pdev,
return devm_request_and_ioremap(&pdev->dev, &regs);
}
+#define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03)
+#define DT_TYPE_IO 0x1
+#define DT_TYPE_MEM32 0x2
+#define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
+#define DT_CPUADDR_TO_ATTR(cpuaddr) (((cpuaddr) >> 48) & 0xFF)
+
+static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
+ unsigned long type, int *tgt, int *attr)
+{
+ const int na = 3, ns = 2;
+ const __be32 *range;
+ int rlen, nranges, rangesz, pna, i;
+
+ range = of_get_property(np, "ranges", &rlen);
+ if (!range)
+ return -EINVAL;
+
+ pna = of_n_addr_cells(np);
+ rangesz = pna + na + ns;
+ nranges = rlen / sizeof(__be32) / rangesz;
+
+ for (i = 0; i < nranges; i++) {
+ u32 flags = of_read_number(range, 1);
+ u32 slot = of_read_number(range, 2);
+ u64 cpuaddr = of_read_number(range + na, pna);
+ unsigned long rtype;
+
+ if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
+ rtype = IORESOURCE_IO;
+ else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
+ rtype = IORESOURCE_MEM;
+
+ if (slot == PCI_SLOT(devfn) && type == rtype) {
+ *tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
+ *attr = DT_CPUADDR_TO_ATTR(cpuaddr);
+ return 0;
+ }
+
+ range += rangesz;
+ }
+
+ return -ENOENT;
+}
+
static int __init mvebu_pcie_probe(struct platform_device *pdev)
{
struct mvebu_pcie *pcie;
struct device_node *np = pdev->dev.of_node;
- struct of_pci_range range;
- struct of_pci_range_parser parser;
struct device_node *child;
int i, ret;
@@ -771,29 +791,25 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
pcie->pdev = pdev;
- if (of_pci_range_parser_init(&parser, np))
+ /* Get the PCIe memory and I/O aperture */
+ mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
+ if (resource_size(&pcie->mem) == 0) {
+ dev_err(&pdev->dev, "invalid memory aperture size\n");
return -EINVAL;
+ }
- /* Get the I/O and memory ranges from DT */
- for_each_of_pci_range(&parser, &range) {
- unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
- if (restype == IORESOURCE_IO) {
- of_pci_range_to_resource(&range, np, &pcie->io);
- of_pci_range_to_resource(&range, np, &pcie->realio);
- pcie->io.name = "I/O";
- pcie->realio.start = max_t(resource_size_t,
- PCIBIOS_MIN_IO,
- range.pci_addr);
- pcie->realio.end = min_t(resource_size_t,
- IO_SPACE_LIMIT,
- range.pci_addr + range.size);
- }
- if (restype == IORESOURCE_MEM) {
- of_pci_range_to_resource(&range, np, &pcie->mem);
- pcie->mem.name = "MEM";
- }
+ mvebu_mbus_get_pcie_io_aperture(&pcie->io);
+ if (resource_size(&pcie->io) == 0) {
+ dev_err(&pdev->dev, "invalid I/O aperture size\n");
+ return -EINVAL;
}
+ pcie->realio.flags = pcie->io.flags;
+ pcie->realio.start = PCIBIOS_MIN_IO;
+ pcie->realio.end = min_t(resource_size_t,
+ IO_SPACE_LIMIT,
+ resource_size(&pcie->io));
+
/* Get the bus range */
ret = of_pci_parse_bus_range(np, &pcie->busn);
if (ret) {
@@ -841,6 +857,22 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
if (port->devfn < 0)
continue;
+ ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_MEM,
+ &port->mem_target, &port->mem_attr);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for mem window\n",
+ port->port, port->lane);
+ continue;
+ }
+
+ ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_IO,
+ &port->io_target, &port->io_attr);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for io window\n",
+ port->port, port->lane);
+ continue;
+ }
+
port->base = mvebu_pcie_map_registers(pdev, child, port);
if (!port->base) {
dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n",
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index bb7ebb22db01..d85009de713d 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -3,16 +3,13 @@
#
menuconfig HOTPLUG_PCI
- tristate "Support for PCI Hotplug"
+ bool "Support for PCI Hotplug"
depends on PCI && SYSFS
---help---
Say Y here if you have a motherboard with a PCI Hotplug controller.
This allows you to add and remove PCI cards while the machine is
powered up and running.
- To compile this driver as a module, choose M here: the
- module will be called pci_hotplug.
-
When in doubt, say N.
if HOTPLUG_PCI
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index aac7a40e4a4a..0e0d0f7f63fd 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -92,7 +92,14 @@ int pciehp_unconfigure_device(struct slot *p_slot)
if (ret)
presence = 0;
- list_for_each_entry_safe(dev, temp, &parent->devices, bus_list) {
+ /*
+ * Stopping an SR-IOV PF device removes all the associated VFs,
+ * which will update the bus->devices list and confuse the
+ * iterator. Therefore, iterate in reverse so we remove the VFs
+ * first, then the PF. We do the same in pci_stop_bus_device().
+ */
+ list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
+ bus_list) {
pci_dev_get(dev);
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
pci_read_config_byte(dev, PCI_BRIDGE_CONTROL, &bctl);
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index b29e20b7862f..bb7af78e4eed 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -388,7 +388,6 @@ int dlpar_remove_pci_slot(char *drc_name, struct device_node *dn)
/* Remove the EADS bridge device itself */
BUG_ON(!bus->self);
pr_debug("PCI: Now removing bridge device %s\n", pci_name(bus->self));
- eeh_remove_bus_device(bus->self, true);
pci_stop_and_remove_bus_device(bus->self);
return 0;
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index dbdc5f7e2b29..01e264fb50e0 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -317,13 +317,20 @@ void acpi_pci_remove_bus(struct pci_bus *bus)
/* ACPI bus type */
static int acpi_pci_find_device(struct device *dev, acpi_handle *handle)
{
- struct pci_dev * pci_dev;
- u64 addr;
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ bool is_bridge;
+ u64 addr;
- pci_dev = to_pci_dev(dev);
+ /*
+ * pci_is_bridge() is not suitable here, because pci_dev->subordinate
+ * is set only after acpi_pci_find_device() has been called for the
+ * given device.
+ */
+ is_bridge = pci_dev->hdr_type == PCI_HEADER_TYPE_BRIDGE
+ || pci_dev->hdr_type == PCI_HEADER_TYPE_CARDBUS;
/* Please ref to ACPI spec for the syntax of _ADR */
addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn);
- *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr);
+ *handle = acpi_find_child(ACPI_HANDLE(dev->parent), addr, is_bridge);
if (!*handle)
return -ENODEV;
return 0;
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 569f82fc9e22..3b94cfcfa03b 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -14,15 +14,12 @@ config PCIEPORTBUS
# Include service Kconfig here
#
config HOTPLUG_PCI_PCIE
- tristate "PCI Express Hotplug driver"
+ bool "PCI Express Hotplug driver"
depends on HOTPLUG_PCI && PCIEPORTBUS
help
Say Y here if you have a motherboard that supports PCI Express Native
Hotplug
- To compile this driver as a module, choose M here: the
- module will be called pciehp.
-
When in doubt, say N.
source "drivers/pci/pcie/aer/Kconfig"
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index d254e2379533..64a7de22d9af 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -300,6 +300,47 @@ static void assign_requested_resources_sorted(struct list_head *head,
}
}
+static unsigned long pci_fail_res_type_mask(struct list_head *fail_head)
+{
+ struct pci_dev_resource *fail_res;
+ unsigned long mask = 0;
+
+ /* check failed type */
+ list_for_each_entry(fail_res, fail_head, list)
+ mask |= fail_res->flags;
+
+ /*
+ * one pref failed resource will set IORESOURCE_MEM,
+ * as we can allocate pref in non-pref range.
+ * Will release all assigned non-pref sibling resources
+ * according to that bit.
+ */
+ return mask & (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH);
+}
+
+static bool pci_need_to_release(unsigned long mask, struct resource *res)
+{
+ if (res->flags & IORESOURCE_IO)
+ return !!(mask & IORESOURCE_IO);
+
+ /* check pref at first */
+ if (res->flags & IORESOURCE_PREFETCH) {
+ if (mask & IORESOURCE_PREFETCH)
+ return true;
+ /* count pref if its parent is non-pref */
+ else if ((mask & IORESOURCE_MEM) &&
+ !(res->parent->flags & IORESOURCE_PREFETCH))
+ return true;
+ else
+ return false;
+ }
+
+ if (res->flags & IORESOURCE_MEM)
+ return !!(mask & IORESOURCE_MEM);
+
+ return false; /* should not get here */
+}
+
static void __assign_resources_sorted(struct list_head *head,
struct list_head *realloc_head,
struct list_head *fail_head)
@@ -312,11 +353,24 @@ static void __assign_resources_sorted(struct list_head *head,
* if could do that, could get out early.
* if could not do that, we still try to assign requested at first,
* then try to reassign add_size for some resources.
+ *
+ * Separate three resource type checking if we need to release
+ * assigned resource after requested + add_size try.
+ * 1. if there is io port assign fail, will release assigned
+ * io port.
+ * 2. if there is pref mmio assign fail, release assigned
+ * pref mmio.
+ * if assigned pref mmio's parent is non-pref mmio and there
+ * is non-pref mmio assign fail, will release that assigned
+ * pref mmio.
+ * 3. if there is non-pref mmio assign fail or pref mmio
+ * assigned fail, will release assigned non-pref mmio.
*/
LIST_HEAD(save_head);
LIST_HEAD(local_fail_head);
struct pci_dev_resource *save_res;
- struct pci_dev_resource *dev_res;
+ struct pci_dev_resource *dev_res, *tmp_res;
+ unsigned long fail_type;
/* Check if optional add_size is there */
if (!realloc_head || list_empty(realloc_head))
@@ -348,6 +402,19 @@ static void __assign_resources_sorted(struct list_head *head,
return;
}
+ /* check failed type */
+ fail_type = pci_fail_res_type_mask(&local_fail_head);
+ /* remove not need to be released assigned res from head list etc */
+ list_for_each_entry_safe(dev_res, tmp_res, head, list)
+ if (dev_res->res->parent &&
+ !pci_need_to_release(fail_type, dev_res->res)) {
+ /* remove it from realloc_head list */
+ remove_from_list(realloc_head, dev_res->res);
+ remove_from_list(&save_head, dev_res->res);
+ list_del(&dev_res->list);
+ kfree(dev_res);
+ }
+
free_list(&local_fail_head);
/* Release assigned resource */
list_for_each_entry(dev_res, head, list)
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-16 16:17:46 +0000