summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/hwmon/pmbus/zl6100.c19
1 files changed, 14 insertions, 5 deletions
diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c
index 7a72b6e4ff1d..48c7b4a716ae 100644
--- a/drivers/hwmon/pmbus/zl6100.c
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -38,8 +38,11 @@ struct zl6100_data {
#define to_zl6100_data(x) container_of(x, struct zl6100_data, info)
+#define ZL6100_MFR_CONFIG 0xd0
#define ZL6100_DEVICE_ID 0xe4
+#define ZL6100_MFR_XTEMP_ENABLE (1 << 7)
+
#define ZL6100_WAIT_TIME 1000 /* uS */
static ushort delay = ZL6100_WAIT_TIME;
@@ -162,7 +165,7 @@ static int zl6100_probe(struct i2c_client *client,
const struct i2c_device_id *mid;
if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_READ_BYTE_DATA
+ I2C_FUNC_SMBUS_READ_WORD_DATA
| I2C_FUNC_SMBUS_READ_BLOCK_DATA))
return -ENODEV;
@@ -210,12 +213,9 @@ static int zl6100_probe(struct i2c_client *client,
/*
* Since there was a direct I2C device access above, wait before
* accessing the chip again.
- * Set the timestamp, wait, then set it again. This should provide
- * enough buffer time to be safe.
*/
data->access = ktime_get();
zl6100_wait(data);
- data->access = ktime_get();
info = &data->info;
@@ -223,7 +223,16 @@ static int zl6100_probe(struct i2c_client *client,
info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
- | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+
+ ret = i2c_smbus_read_word_data(client, ZL6100_MFR_CONFIG);
+ if (ret < 0)
+ goto err_mem;
+ if (ret & ZL6100_MFR_XTEMP_ENABLE)
+ info->func[0] |= PMBUS_HAVE_TEMP2;
+
+ data->access = ktime_get();
+ zl6100_wait(data);
info->read_word_data = zl6100_read_word_data;
info->read_byte_data = zl6100_read_byte_data;