ARM: qcom_defconfig: Add QCOM specific drivers

This patch adds common kconfig options required for qcom chips to work.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

1 files changed, 63 insertions, 3 deletions

diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 56bda6b4d05d..d6aba991e0c2 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -21,6 +21,11 @@ CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_MSM8X60=y
 CONFIG_ARCH_MSM8960=y
 CONFIG_ARCH_MSM8974=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_STUB=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCIEPORTBUS=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
@@ -29,11 +34,20 @@ CONFIG_HIGHPTE=y
 CONFIG_CLEANCACHE=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_ARM_QCOM_CPUFREQ=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_QCOM_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -48,7 +62,19 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_ATH3K=y
 CONFIG_CFG80211=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=y
 CONFIG_RFKILL=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -58,15 +84,19 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
+CONFIG_EEPROM_AT24=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
+CONFIG_ATL1C=y
+CONFIG_KS8851=y
 CONFIG_MDIO_BITBANG=y
 CONFIG_MDIO_GPIO=y
 CONFIG_SLIP=y
@@ -75,6 +105,9 @@ CONFIG_SLIP_MODE_SLIP6=y
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
 # CONFIG_USB_NET_ZAURUS is not set
+CONFIG_ATH_CARDS=m
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set
@@ -98,14 +131,24 @@ CONFIG_PINCTRL_APQ8084=y
 CONFIG_PINCTRL_IPQ8064=y
 CONFIG_PINCTRL_MSM8960=y
 CONFIG_PINCTRL_MSM8X74=y
+CONFIG_PINCTRL_SSBI_PMIC=y
+CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_MSM=y
 CONFIG_THERMAL=y
+CONFIG_THERMAL_TSENS8960=y
+CONFIG_WATCHDOG=y
+CONFIG_QCOM_WDT=y
+CONFIG_MFD_PM8921_CORE=y
+CONFIG_MFD_QCOM_RPM=y
+CONFIG_MFD_SPMI_PMIC=y
+CONFIG_MFD_SYSCON=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_QCOM_RPM=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_FB=y
 CONFIG_SOUND=y
@@ -118,15 +161,28 @@ CONFIG_SND_SOC=y
 CONFIG_HID_BATTERY_STRENGTH=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_OTG_FSM=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MSM=y
 CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_UAS=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_USB_SERIAL=y
+CONFIG_USB_MSM_OTG=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FUNCTIONFS=m
+CONFIG_USB_FUNCTIONFS_RNDIS=y
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
-CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
@@ -143,7 +199,11 @@ CONFIG_IPQ_GCC_806X=y
 CONFIG_MSM_GCC_8660=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
-CONFIG_MSM_IOMMU=y
+CONFIG_QCOM_HFPLL=y
+CONFIG_KPSS_XCC=y
+CONFIG_KRAITCC=y
+CONFIG_QCOM_RPMCC=y
+CONFIG_QCOM_IOMMU_V0=y
 CONFIG_PHY_QCOM_APQ8064_SATA=y
 CONFIG_PHY_QCOM_IPQ806X_SATA=y
 CONFIG_EXT2_FS=y