arm64: dts: qcom: msm8916: Add spmi controlled regulators

This patch adds spmi controlled regulators.
Content of this is copied from msm 3.10 kernel tree.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

3 files changed, 762 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/qcom/msm-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm-pm8916.dtsi
new file mode 100644
index 000000000000..6fe1957888e2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm-pm8916.dtsi
@@ -0,0 +1,636 @@
+/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+&spmi_bus {
+
+	qcom,pm8916@0 {
+		spmi-slave-container;
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		pm8916_revid: qcom,revid@100 {
+			compatible = "qcom,qpnp-revid";
+			reg = <0x100 0x100>;
+		};
+
+		pm8916_pon: qcom,power-on@800 {
+			compatible = "qcom,qpnp-power-on";
+			reg = <0x800 0x100>;
+			interrupts = <0x0 0x8 0x0>,
+				     <0x0 0x8 0x1>;
+			interrupt-names = "kpdpwr", "resin";
+			qcom,pon-dbc-delay = <15625>;
+			qcom,system-reset;
+			qcom,clear-warm-reset;
+
+			qcom,pon_1 {
+				qcom,pon-type = <0>;
+				qcom,support-reset = <1>;
+				qcom,pull-up = <1>;
+				qcom,s1-timer = <10256>;
+				qcom,s2-timer = <2000>;
+				qcom,s2-type = <1>;
+				linux,code = <116>;
+			};
+
+			qcom,pon_2 {
+				qcom,pon-type = <1>;
+				qcom,pull-up = <1>;
+				linux,code = <114>;
+			};
+		};
+
+		pm8916_mpps: mpps {
+			compatible = "qcom,qpnp-pin";
+			spmi-dev-container;
+			gpio-controller;
+			#gpio-cells = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			label = "pm8916-mpp";
+
+			mpp@a000 {
+				reg = <0xa000 0x100>;
+				qcom,pin-num = <1>;
+			};
+
+			mpp@a100 {
+				reg = <0xa100 0x100>;
+				qcom,pin-num = <2>;
+			};
+
+			mpp@a200 {
+				reg = <0xa200 0x100>;
+				qcom,pin-num = <3>;
+			};
+
+			mpp@a300 {
+				reg = <0xa300 0x100>;
+				qcom,pin-num = <4>;
+			};
+		};
+
+		pm8916_gpios: gpios {
+			compatible = "qcom,qpnp-pin";
+			spmi-dev-container;
+			gpio-controller;
+			#gpio-cells = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			label = "pm8916-gpio";
+
+			gpio@c000 {
+				reg = <0xc000 0x100>;
+				qcom,pin-num = <1>;
+			};
+
+			gpio@c100 {
+				reg = <0xc100 0x100>;
+				qcom,pin-num = <2>;
+			};
+
+			gpio@c200 {
+				reg = <0xc200 0x100>;
+				qcom,pin-num = <3>;
+			};
+
+			gpio@c300 {
+				reg = <0xc300 0x100>;
+				qcom,pin-num = <4>;
+			};
+		};
+
+		pm8916_rtc: qcom,pm8916_rtc {
+                        spmi-dev-container;
+                        compatible = "qcom,qpnp-rtc";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        qcom,qpnp-rtc-write = <0>;
+                        qcom,qpnp-rtc-alarm-pwrup = <0>;
+
+                        qcom,pm8916_rtc_rw@6000 {
+                                reg = <0x6000 0x100>;
+                        };
+                        qcom,pm8916_rtc_alarm@6100 {
+                                reg = <0x6100 0x100>;
+                                interrupts = <0x0 0x61 0x1>;
+                        };
+                };
+
+		pm8916_vadc: vadc@3100 {
+			compatible = "qcom,qpnp-vadc";
+			reg = <0x3100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x31 0x0>;
+			interrupt-names = "eoc-int-en-set";
+			qcom,adc-bit-resolution = <15>;
+			qcom,adc-vdd-reference = <1800>;
+			qcom,vadc-poll-eoc;
+			qcom,pmic-revid = <&pm8916_revid>;
+
+			chan@8 {
+				label = "die_temp";
+				reg = <8>;
+				qcom,decimation = <0>;
+				qcom,pre-div-channel-scaling = <0>;
+				qcom,calibration-type = "absolute";
+				qcom,scale-function = <3>;
+				qcom,hw-settle-time = <0>;
+				qcom,fast-avg-setup = <0>;
+			};
+
+			chan@9 {
+				label = "ref_625mv";
+				reg = <9>;
+				qcom,decimation = <0>;
+				qcom,pre-div-channel-scaling = <0>;
+				qcom,calibration-type = "absolute";
+				qcom,scale-function = <0>;
+				qcom,hw-settle-time = <0>;
+				qcom,fast-avg-setup = <0>;
+			};
+
+			chan@a {
+				label = "ref_1250v";
+				reg = <0xa>;
+				qcom,decimation = <0>;
+				qcom,pre-div-channel-scaling = <0>;
+				qcom,calibration-type = "absolute";
+				qcom,scale-function = <0>;
+				qcom,hw-settle-time = <0>;
+				qcom,fast-avg-setup = <0>;
+			};
+		};
+
+		pm8916_tz: qcom,temp-alarm@2400 {
+			compatible = "qcom,qpnp-temp-alarm";
+			reg = <0x2400 0x100>;
+			interrupts = <0x0 0x24 0x0>;
+			label = "pm8916_tz";
+			qcom,channel-num = <8>;
+			qcom,threshold-set = <0>;
+			qcom,temp_alarm-vadc = <&pm8916_vadc>;
+		};
+
+		pm8916_adc_tm: vadc@3400 {
+			compatible = "qcom,qpnp-adc-tm";
+			reg = <0x3400 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts =	<0x0 0x34 0x0>,
+					<0x0 0x34 0x3>,
+					<0x0 0x34 0x4>;
+			interrupt-names =	"eoc-int-en-set",
+						"high-thr-en-set",
+						"low-thr-en-set";
+			qcom,adc-bit-resolution = <15>;
+			qcom,adc-vdd-reference = <1800>;
+			qcom,adc_tm-vadc = <&pm8916_vadc>;
+			qcom,pmic-revid = <&pm8916_revid>;
+		};
+
+		pm8916_chg: qcom,charger {
+			spmi-dev-container;
+			compatible = "qcom,qpnp-linear-charger";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qcom,vddmax-mv = <4200>;
+			qcom,vddsafe-mv = <4200>;
+			qcom,vinmin-mv = <4308>;
+			qcom,ibatsafe-ma = <1440>;
+			qcom,thermal-mitigation = <1440 720 630 0>;
+			qcom,cool-bat-decidegc = <100>;
+			qcom,warm-bat-decidegc = <450>;
+			qcom,cool-bat-mv = <4100>;
+			qcom,warm-bat-mv = <4100>;
+			qcom,ibatmax-warm-ma = <360>;
+			qcom,ibatmax-cool-ma = <360>;
+			qcom,batt-hot-percentage = <25>;
+			qcom,batt-cold-percentage = <80>;
+			qcom,tchg-mins = <232>;
+			qcom,resume-soc = <99>;
+			qcom,chg-vadc = <&pm8916_vadc>;
+			qcom,chg-adc_tm = <&pm8916_adc_tm>;
+
+			status = "disabled";
+
+			qcom,chgr@1000 {
+				reg = <0x1000 0x100>;
+				interrupts =	<0x0 0x10 0x7>,
+						<0x0 0x10 0x6>,
+						<0x0 0x10 0x5>,
+						<0x0 0x10 0x0>;
+				interrupt-names =	"chg-done",
+							"chg-failed",
+							"fast-chg-on",
+							"vbat-det-lo";
+			};
+
+			qcom,bat-if@1200 {
+				reg = <0x1200 0x100>;
+				interrupts =	<0x0 0x12 0x1>,
+						<0x0 0x12 0x0>;
+				interrupt-names =	"bat-temp-ok",
+							"batt-pres";
+			};
+
+			qcom,usb-chgpth@1300 {
+				reg = <0x1300 0x100>;
+				interrupts =	<0 0x13 0x4>,
+						<0 0x13 0x2>,
+						<0 0x13 0x1>;
+				interrupt-names =	"usb-over-temp",
+							"chg-gone",
+							"usbin-valid";
+			};
+
+			qcom,chg-misc@1600 {
+				reg = <0x1600 0x100>;
+			};
+		};
+
+		pm8916_bms: qcom,vmbms {
+			spmi-dev-container;
+			compatible = "qcom,qpnp-vm-bms";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			qcom,v-cutoff-uv = <3400000>;
+			qcom,max-voltage-uv = <4200000>;
+			qcom,r-conn-mohm = <0>;
+			qcom,shutdown-soc-valid-limit = <100>;
+			qcom,low-soc-calculate-soc-threshold = <15>;
+			qcom,low-voltage-calculate-soc-ms = <1000>;
+			qcom,low-soc-calculate-soc-ms = <5000>;
+			qcom,calculate-soc-ms = <20000>;
+			qcom,volatge-soc-timeout-ms = <60000>;
+			qcom,low-voltage-threshold = <3450000>;
+			qcom,s3-ocv-tolerence-uv = <1200>;
+			qcom,s2-fifo-length = <5>;
+			qcom,low-soc-fifo-length = <2>;
+			qcom,bms-vadc = <&pm8916_vadc>;
+			qcom,bms-adc_tm = <&pm8916_adc_tm>;
+			qcom,pmic-revid = <&pm8916_revid>;
+
+			qcom,force-s3-on-suspend;
+			qcom,force-s2-in-charging;
+			qcom,report-charger-eoc;
+
+			qcom,batt-pres-status@1208 {
+				reg = <0x1208 0x1>;
+			};
+
+			qcom,qpnp-chg-pres@1008 {
+				reg = <0x1008 0x1>;
+			};
+
+			qcom,vm-bms@4000 {
+				reg = <0x4000 0x100>;
+				interrupts =	<0x0 0x40 0x0>,
+						<0x0 0x40 0x1>,
+						<0x0 0x40 0x2>,
+						<0x0 0x40 0x3>,
+						<0x0 0x40 0x4>,
+						<0x0 0x40 0x5>;
+
+				interrupt-names = "leave_cv",
+						  "enter_cv",
+						  "good_ocv",
+						  "ocv_thr",
+						  "fifo_update_done",
+						  "fsm_state_change";
+			};
+		};
+
+		pm8916_leds: qcom,leds@a100 {
+			compatible = "qcom,leds-qpnp";
+			reg = <0xa100 0x100>;
+			label = "mpp";
+		};
+	};
+
+	qcom,pm8916@1 {
+		spmi-slave-container;
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		regulator@1400 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_s1";
+			spmi-dev-container;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1400 0x300>;
+			status = "disabled";
+
+			qcom,ctl@1400 {
+				reg = <0x1400 0x100>;
+			};
+			qcom,ps@1500 {
+				reg = <0x1500 0x100>;
+			};
+			qcom,freq@1600 {
+				reg = <0x1600 0x100>;
+			};
+		};
+
+		regulator@1700 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_s2";
+			spmi-dev-container;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1700 0x300>;
+			status = "disabled";
+
+			qcom,ctl@1700 {
+				reg = <0x1700 0x100>;
+			};
+			qcom,ps@1800 {
+				reg = <0x1800 0x100>;
+			};
+			qcom,freq@1900 {
+				reg = <0x1900 0x100>;
+			};
+		};
+
+		regulator@1a00 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_s3";
+			spmi-dev-container;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1a00 0x300>;
+			status = "disabled";
+
+			qcom,ctl@1a00 {
+				reg = <0x1a00 0x100>;
+			};
+			qcom,ps@1b00 {
+				reg = <0x1b00 0x100>;
+			};
+			qcom,freq@1c00 {
+				reg = <0x1c00 0x100>;
+			};
+		};
+
+		regulator@1d00 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_s4";
+			spmi-dev-container;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1d00 0x300>;
+			status = "disabled";
+
+			qcom,ctl@1d00 {
+				reg = <0x1d00 0x100>;
+			};
+			qcom,ps@1e00 {
+				reg = <0x1e00 0x100>;
+			};
+			qcom,freq@1f00 {
+				reg = <0x1f00 0x100>;
+			};
+		};
+
+		regulator@4000 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l1";
+			reg = <0x4000 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4100 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l2";
+			reg = <0x4100 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4200 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l3";
+			reg = <0x4200 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4300 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l4";
+			reg = <0x4300 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4400 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l5";
+			reg = <0x4400 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4500 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l6";
+			reg = <0x4500 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4600 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l7";
+			reg = <0x4600 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4700 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l8";
+			reg = <0x4700 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4800 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l9";
+			reg = <0x4800 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4900 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l10";
+			reg = <0x4900 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4a00 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l11";
+			reg = <0x4a00 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4b00 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l12";
+			reg = <0x4b00 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4c00 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l13";
+			reg = <0x4c00 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4d00 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l14";
+			reg = <0x4d00 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4e00 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l15";
+			reg = <0x4e00 0x100>;
+			status = "disabled";
+		};
+
+		regulator@4f00 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l16";
+			reg = <0x4f00 0x100>;
+			status = "disabled";
+		};
+
+		regulator@5000 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l17";
+			reg = <0x5000 0x100>;
+			status = "disabled";
+		};
+
+		regulator@5100 {
+			compatible = "qcom,qpnp-regulator";
+			regulator-name = "8916_l18";
+			reg = <0x5100 0x100>;
+			status = "disabled";
+		};
+
+		pm8916_pwm: pwm@bc00 {
+			compatible = "qcom,qpnp-pwm";
+			reg = <0xbc00 0x100>;
+			reg-names = "qpnp-lpg-channel-base";
+			qcom,channel-id = <0>;
+			qcom,supported-sizes = <6>, <9>;
+			#pwm-cells = <2>;
+		};
+
+		pm8916_vib: qcom,vibrator@c000 {
+			compatible = "qcom,qpnp-vibrator";
+			reg = <0xc000 0x100>;
+			label = "vibrator";
+			status = "disabled";
+		};
+
+		pm8916_tombak_dig: msm8x16_wcd_codec@f000{
+			compatible = "qcom,wcd-spmi";
+			reg = <0xf000 0x100>;
+			interrupt-parent = <&spmi_bus>;
+			interrupts = <0x1 0xf0 0x0>,
+				     <0x1 0xf0 0x1>,
+				     <0x1 0xf0 0x2>,
+				     <0x1 0xf0 0x3>,
+				     <0x1 0xf0 0x4>,
+				     <0x1 0xf0 0x5>,
+				     <0x1 0xf0 0x6>,
+				     <0x1 0xf0 0x7>;
+			interrupt-names = "spk_cnp_int",
+					  "spk_clip_int",
+					  "spk_ocp_int",
+					  "ins_rem_det1",
+					  "but_rel_det",
+					  "but_press_det",
+					  "ins_rem_det",
+					  "mbhc_int";
+
+			cdc-vdda-cp-supply = <&pm8916_s4>;
+			qcom,cdc-vdda-cp-voltage = <1800000 2200000>;
+			qcom,cdc-vdda-cp-current = <770000>;
+
+			cdc-vdda-h-supply = <&pm8916_l5>;
+			qcom,cdc-vdda-h-voltage = <1800000 1800000>;
+			qcom,cdc-vdda-h-current = <20000>;
+
+			cdc-vdd-px-supply = <&pm8916_s4>;
+			qcom,cdc-vdd-px-voltage = <1800000 2200000>;
+			qcom,cdc-vdd-px-current = <770000>;
+
+			cdc-vdd-pa-supply = <&pm8916_l5>;
+			qcom,cdc-vdd-pa-voltage = <1800000 1800000>;
+			qcom,cdc-vdd-pa-current = <5000>;
+
+			cdc-vdd-mic-bias-supply = <&pm8916_l13>;
+			qcom,cdc-vdd-mic-bias-voltage = <3075000 3075000>;
+			qcom,cdc-vdd-mic-bias-current = <25000>;
+
+			qcom,cdc-mclk-clk-rate = <9600000>;
+
+			qcom,cdc-static-supplies = "cdc-vdda-h",
+						   "cdc-vdd-px",
+						   "cdc-vdd-pa",
+						   "cdc-vdda-cp";
+
+			qcom,cdc-on-demand-supplies = "cdc-vdd-mic-bias";
+		};
+
+		pm8916_tombak_analog: msm8x16_wcd_codec@f100{
+			compatible = "qcom,wcd-spmi";
+			reg = <0xf100 0x100>;
+			interrupt-parent = <&spmi_bus>;
+			interrupts = <0x1 0xf1 0x0>,
+				     <0x1 0xf1 0x1>,
+				     <0x1 0xf1 0x2>,
+				     <0x1 0xf1 0x3>,
+				     <0x1 0xf1 0x4>,
+				     <0x1 0xf1 0x5>;
+			interrupt-names = "ear_ocp_int",
+					  "hphr_ocp_int",
+					  "hphl_ocp_det",
+					  "ear_cnp_int",
+					  "hphr_cnp_int",
+					  "hphl_cnp_int";
+		};
+
+		pm8916_bcm: qpnp-buck-current-monitor@1800 {
+			compatible = "qcom,qpnp-buck-current-monitor";
+			reg = <0x1800 0x100>;
+			interrupts = <1 0x18 0>, <1 0x18 1>;
+			interrupt-names = "iwarning", "icritical";
+			qcom,enable-current-monitor;
+			qcom,icrit-init-threshold-pc = <90>;
+			qcom,iwarn-init-threshold-pc = <70>;
+			qcom,icrit-polling-delay-msec = <1000>;
+			qcom,iwarn-polling-delay-msec = <2000>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-regulator.dtsi b/arch/arm64/boot/dts/qcom/msm8916-regulator.dtsi
new file mode 100644
index 000000000000..e5a67d1b49ec
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-regulator.dtsi
@@ -0,0 +1,105 @@
+/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* SPM controlled regulators */
+&spmi_bus {
+	qcom,pm8916@1 {
+		pm8916_s2: spm-regulator@1700 {
+			compatible = "qcom,spm-regulator";
+			regulator-name = "8916_s2";
+			reg = <0x1700 0x100>;
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1350000>;
+		};
+	};
+};
+
+/* CPR controlled regulator */
+
+&soc {
+	mem_acc_vreg_corner: regulator@1946000 {
+		compatible = "qcom,mem-acc-regulator";
+		reg = <0x1946000 0x4>, <0x1946000 0x4>, <0x58000 0x1000>;
+		reg-names = "acc-sel-l1", "acc-sel-l2", "efuse_addr";
+		regulator-name = "mem_acc_corner";
+		regulator-min-microvolt = <1>;
+		regulator-max-microvolt = <3>;
+
+		qcom,acc-sel-l1-bit-pos = <0>;
+		qcom,acc-sel-l2-bit-pos = <8>;
+		qcom,corner-acc-map = <0 1 1>;
+		qcom,l1-config-skip-fuse-sel = <0 52 1 1 0>;
+	};
+
+	apc_vreg_corner: regulator@b018000 {
+		compatible = "qcom,cpr-regulator";
+		reg = <0xb018000 0x1000>, <0xb011064 4>, <0x58000 0x1000>;
+		reg-names = "rbcpr", "rbcpr_clk", "efuse_addr";
+		interrupts = <0 15 0>;
+		regulator-name = "apc_corner";
+		qcom,cpr-fuse-corners = <3>;
+		regulator-min-microvolt = <1>;
+		regulator-max-microvolt = <8>;
+
+		qcom,cpr-voltage-ceiling = <1050000 1150000 1350000>;
+		qcom,cpr-voltage-floor = <1050000 1050000 1162500>;
+		vdd-apc-supply = <&pm8916_s2>;
+
+		qcom,vdd-mx-corner-map = <4 5 7>;
+		qcom,vdd-mx-vmin-method = <4>;
+		vdd-mx-supply = <&pm8916_l3_corner_ao>;
+		qcom,vdd-mx-vmax = <7>;
+
+		mem-acc-supply = <&mem_acc_vreg_corner>;
+
+		qcom,cpr-ref-clk = <19200>;
+		qcom,cpr-timer-delay = <5000>;
+		qcom,cpr-timer-cons-up = <0>;
+		qcom,cpr-timer-cons-down = <2>;
+		qcom,cpr-irq-line = <0>;
+		qcom,cpr-step-quotient = <26>;
+		qcom,cpr-up-threshold = <0>;
+		qcom,cpr-down-threshold = <2>;
+		qcom,cpr-idle-clocks = <15>;
+		qcom,cpr-gcnt-time = <1>;
+		qcom,vdd-apc-step-up-limit = <1>;
+		qcom,vdd-apc-step-down-limit = <1>;
+		qcom,cpr-apc-volt-step = <12500>;
+
+		qcom,cpr-fuse-row = <27 0>;
+		qcom,cpr-fuse-target-quot = <42 24 6>;
+		qcom,cpr-fuse-ro-sel = <54 54 54>;
+		qcom,cpr-fuse-bp-cpr-disable = <57>;
+		qcom,cpr-fuse-init-voltage =
+					<27 36 6 0>,
+					<27 18 6 0>,
+					<27 0 6 0>;
+		qcom,cpr-init-voltage-ref = <1050000 1150000 1350000>;
+		qcom,cpr-init-voltage-step = <10000>;
+		qcom,cpr-corner-map = <1 1 2 2 3 3 3 3>;
+		qcom,cpr-corner-frequency-map =
+					<1 200000000>,
+					<2 400000000>,
+					<3 533330000>,
+					<4 800000000>,
+					<5 998400000>,
+					<6 1094400000>,
+					<7 1152000000>,
+					<8 1209600000>;
+		qcom,speed-bin-fuse-sel = <0 55 2 0>;
+		qcom,cpr-speed-bin-max-corners =
+					<0 0 2 4 8>,
+					<1 0 2 4 7>;
+		qcom,cpr-quot-adjust-scaling-factor-max = <650>;
+		qcom,cpr-enable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5a45e2484102..d92dfc796417 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -618,5 +618,26 @@
 		};
 	};
 
+	spmi_bus: qcom,spmi@200f000 {
+		compatible = "qcom,spmi-pmic-arb";
+		reg = <0x200f000 0x1000>,
+			<0x2400000 0x400000>,
+			<0x2c00000 0x400000>,
+			<0x3800000 0x200000>,
+			<0x200a000 0x2100>;
+		reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+		interrupts = <0 190 0>;
+		qcom,pmic-arb-channel = <0>;
+		qcom,pmic-arb-ee = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <0>;
+	};
+
 	};
 };
+
+#include "msm-pm8916.dtsi"
+#include "msm8916-regulator.dtsi"