From c7bf71c517abfc3b15970d67910e0f62e0522939 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 17 Jan 2011 12:48:20 -0800 Subject: hwmon: (lm93) Add support for LM94 This patch adds basic support for LM94 to the LM93 driver. LM94 specific sensors and features are not supported. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare --- Documentation/hwmon/lm93 | 7 +++++++ drivers/hwmon/Kconfig | 4 ++-- drivers/hwmon/lm93.c | 21 +++++++++++++++++++-- 3 files changed, 28 insertions(+), 4 deletions(-) diff --git a/Documentation/hwmon/lm93 b/Documentation/hwmon/lm93 index 7a10616d0b44..f3b2ad2ceb01 100644 --- a/Documentation/hwmon/lm93 +++ b/Documentation/hwmon/lm93 @@ -6,6 +6,10 @@ Supported chips: Prefix 'lm93' Addresses scanned: I2C 0x2c-0x2e Datasheet: http://www.national.com/ds.cgi/LM/LM93.pdf + * National Semiconductor LM94 + Prefix 'lm94' + Addresses scanned: I2C 0x2c-0x2e + Datasheet: http://www.national.com/ds.cgi/LM/LM94.pdf Authors: Mark M. Hoffman @@ -56,6 +60,9 @@ previous motherboard management ASICs and uses some of the LM85's features for dynamic Vccp monitoring and PROCHOT. It is designed to monitor a dual processor Xeon class motherboard with a minimum of external components. +LM94 is also supported in LM93 compatible mode. Extra sensors and features of +LM94 are not supported. + User Interface -------------- diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 35f00dae3676..773e484f1646 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -618,8 +618,8 @@ config SENSORS_LM93 depends on I2C select HWMON_VID help - If you say yes here you get support for National Semiconductor LM93 - sensor chips. + If you say yes here you get support for National Semiconductor LM93, + LM94, and compatible sensor chips. This driver can also be built as a module. If so, the module will be called lm93. diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c index c9ed14eba5a6..3b43df418613 100644 --- a/drivers/hwmon/lm93.c +++ b/drivers/hwmon/lm93.c @@ -135,6 +135,11 @@ #define LM93_MFR_ID 0x73 #define LM93_MFR_ID_PROTOTYPE 0x72 +/* LM94 REGISTER VALUES */ +#define LM94_MFR_ID_2 0x7a +#define LM94_MFR_ID 0x79 +#define LM94_MFR_ID_PROTOTYPE 0x78 + /* SMBus capabilities */ #define LM93_SMBUS_FUNC_FULL (I2C_FUNC_SMBUS_BYTE_DATA | \ I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA) @@ -2504,6 +2509,7 @@ static int lm93_detect(struct i2c_client *client, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; int mfr, ver; + const char *name; if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN)) return -ENODEV; @@ -2517,13 +2523,23 @@ static int lm93_detect(struct i2c_client *client, struct i2c_board_info *info) } ver = lm93_read_byte(client, LM93_REG_VER); - if (ver != LM93_MFR_ID && ver != LM93_MFR_ID_PROTOTYPE) { + switch (ver) { + case LM93_MFR_ID: + case LM93_MFR_ID_PROTOTYPE: + name = "lm93"; + break; + case LM94_MFR_ID_2: + case LM94_MFR_ID: + case LM94_MFR_ID_PROTOTYPE: + name = "lm94"; + break; + default: dev_dbg(&adapter->dev, "detect failed, bad version id 0x%02x!\n", ver); return -ENODEV; } - strlcpy(info->type, "lm93", I2C_NAME_SIZE); + strlcpy(info->type, name, I2C_NAME_SIZE); dev_dbg(&adapter->dev,"loading %s at %d,0x%02x\n", client->name, i2c_adapter_id(client->adapter), client->addr); @@ -2602,6 +2618,7 @@ static int lm93_remove(struct i2c_client *client) static const struct i2c_device_id lm93_id[] = { { "lm93", 0 }, + { "lm94", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, lm93_id); -- cgit v1.2.3