aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2012-09-28Merge branch 'for-linus-3.6-rc-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML fixes from Richard Weinberger. * 'for-linus-3.6-rc-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Preinclude include/linux/kern_levels.h um: Fix IPC on um um: kill thread->forking um: let signal_delivered() do SIGTRAP on singlestepping into handler um: don't leak floating point state and segment registers on execve() um: take cleaning singlestep to start_thread()
2012-09-27Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull one more arm-soc bugfix from Olof Johansson: "Here's a bugfix for orion5x. Without this, PCI doesn't initialize properly because of too small coherent pool to cover the allocations needed. A similar fix has already been done on kirkwood." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: Orion5x: Fix too small coherent pool.
2012-09-27Merge branch 'fixes-for-3.6' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull ARM dma-mapping fix from Marek Szyprowski: "This patch fixes a potential memory leak in the ARM dma-mapping code." * 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: Fix potential memory leak in atomic_pool_init()
2012-09-27um: Preinclude include/linux/kern_levels.hGeert Uytterhoeven
The userspace part of UML uses the asm-offsets.h generator mechanism to create definitions for UM_KERN_<LEVEL> that match the in-kernel KERN_<LEVEL> constant definitions. As of commit 04d2c8c83d0e3ac5f78aeede51babb3236200112 ("printk: convert the format for KERN_<LEVEL> to a 2 byte pattern"), KERN_<LEVEL> is no longer expanded to the literal '"<LEVEL>"', but to '"\001" "LEVEL"', i.e. it contains two parts. However, the combo of DEFINE_STR() in arch/x86/um/shared/sysdep/kernel-offsets.h and sed-y in Kbuild doesn't support string literals consisting of multiple parts. Hence for all UM_KERN_<LEVEL> definitions, only the SOH character is retained in the actual definition, while the remainder ends up in the comment. E.g. in include/generated/asm-offsets.h we get #define UM_KERN_INFO "\001" /* "6" KERN_INFO */ instead of #define UM_KERN_INFO "\001" "6" /* KERN_INFO */ This causes spurious '^A' output in some kernel messages: Calibrating delay loop... 4640.76 BogoMIPS (lpj=23203840) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 ^AChecking that host ptys support output SIGIO...Yes ^AChecking that host ptys support SIGIO on close...No, enabling workaround ^AUsing 2.6 host AIO NET: Registered protocol family 16 bio: create slab <bio-0> at 0 Switching to clocksource itimer To fix this: - Move the mapping from UM_KERN_<LEVEL> to KERN_<LEVEL> from arch/um/include/shared/common-offsets.h to arch/um/include/shared/user.h, which is preincluded for all userspace parts, - Preinclude include/linux/kern_levels.h for all userspace parts, to obtain the in-kernel KERN_<LEVEL> constant definitions. This doesn't violate the kernel/userspace separation, as include/linux/kern_levels.h is self-contained and doesn't expose any other kernel internals. - Remove the now unused STR() and DEFINE_STR() macros. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-09-27um: Fix IPC on umRichard Weinberger
commit c1d7e01d (ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION) forgot UML and broke IPC on it. Also UML has to select ARCH_WANT_IPC_PARSE_VERSION usin Kconfig. Reported-and-tested-by: <Toralf Förster toralf.foerster@gmx.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-09-27um: kill thread->forkingAl Viro
we only use that to tell copy_thread() done by syscall from that done by kernel_thread(). However, it's easier to do simply by checking PF_KTHREAD in thread flags. Merge sys_clone() guts for 32bit and 64bit, while we are at it... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27um: let signal_delivered() do SIGTRAP on singlestepping into handlerAl Viro
... rather than duplicating that in sigframe setup code (and doing that inconsistently, at that) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27um: don't leak floating point state and segment registers on execve()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27um: take cleaning singlestep to start_thread()Al Viro
... assuming it's needed to be done at all Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26ARM: Orion5x: Fix too small coherent pool.Andrew Lunn
Some Orion5x devices allocate their coherent buffers from atomic context. Increase size of atomic coherent pool to make sure such the allocations won't fail during boot. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-26Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds
Pull c6x arch fixes from Mark Salter: - Add __NR_kcmp to generic syscall list - C6X: Use generic asm/barrier.h * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: syscalls: add __NR_kcmp syscall to generic unistd.h c6x: use asm-generic/barrier.h
2012-09-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull more networking fixes from David Miller: 1) Eric Dumazet discovered and fixed what turned out to be a family of bugs. These functions were using pskb_may_pull() which might need to reallocate the linear SKB data buffer, but the callers were not expecting this possibility. The callers have cached pointers to the packet header areas, and would need to reload them if we were to continue using pskb_may_pull(). So they could end up reading garbage. It's easier to just change these RAW4/RAW6/MIP6 routines to use skb_header_pointer() instead of pskb_may_pull(), which won't modify the linear SKB data area. 2) Dave Jone's syscall spammer caught a case where a non-TCP socket can call down into the TCP keepalive code. The case basically involves creating a raw socket with sk_protocol == IPPROTO_TCP, then calling setsockopt(sock_fd, SO_KEEPALIVE, ...) Fixed by Eric Dumazet. 3) Bluetooth devices do not get configured properly while being powered on, resulting in always using legacy pairing instead of SSP. Fix from Andrzej Kaczmarek. 4) Bluetooth cancels delayed work erroneously, put stricter checks in place. From Andrei Emeltchenko. 5) Fix deadlock between cfg80211_mutex and reg_regdb_search_mutex in cfg80211, from Luis R. Rodriguez. 6) Fix interrupt double release in iwlwifi, from Emmanuel Grumbach. 7) Missing module license in bcm87xx driver, from Peter Huewe. 8) Team driver can lose port changed events when adding devices to a team, fix from Jiri Pirko. 9) Fix endless loop when trying ot unregister PPPOE device in zombie state, from Xiaodong Xu. 10) batman-adv layer needs to set MAC address of software device earlier, otherwise we call tt_local_add with it uninitialized. 11) Fix handling of KSZ8021 PHYs, it's matched currently by KS8051 but that doesn't program the device properly. From Marek Vasut. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: ipv6: mip6: fix mip6_mh_filter() ipv6: raw: fix icmpv6_filter() net: guard tcp_set_keepalive() to tcp sockets phy/micrel: Add missing header to micrel_phy.h phy/micrel: Rename KS80xx to KSZ80xx phy/micrel: Implement support for KSZ8021 batman-adv: Fix symmetry check / route flapping in multi interface setups batman-adv: Fix change mac address of soft iface. pppoe: drop PPPOX_ZOMBIEs in pppoe_release team: send port changed when added ipv4: raw: fix icmp_filter() net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver iwlwifi: don't double free the interrupt in failure path cfg80211: fix possible circular lock on reg_regdb_search() Bluetooth: Fix not removing power_off delayed work Bluetooth: Fix freeing uninitialized delayed works Bluetooth: mgmt: Fix enabling LE while powered off Bluetooth: mgmt: Fix enabling SSP while powered off
2012-09-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
Pull tile gxio ABI fix from Chris Metcalf: "This fixes a last-minute change in the Tilera hypervisor ABI for TRIO (PCI root complex) support. We've locked in this ABI going forward and will make sure no further ABI changes like this occur." * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: gxio iorpc numbering change for TRIO interface
2012-09-24Merge tag 'stable/for-linus-3.6-rc7-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull a Xen fix from Konrad Rzeszutek Wilk: "It is a bug-fix when we run the initial PV guest on a AMD K8 machine and have CONFIG_AMD_NUMA enabled and detect the NUMA topology from the Northbridge. We end up in the situation where the initial domain gets too much information and gets confused and crashes - the fix is to restrict the domain to get the information - and we do it by just disabling NUMA on the PV guest (the hypervisor is still able to do its proper NUMA allocations of guests). It is OK to disable the PV guest from accessing NUMA data as right now we do not inject any NUMA node information to the PV guests. When we do get to that point, then this patch will have to be reverted." * Disable PV NUMA support as we do not do anything with it (yet) and it can cause bootup crashes on certain AMD machines. * tag 'stable/for-linus-3.6-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/boot: Disable NUMA for PV guests.
2012-09-24phy/micrel: Rename KS80xx to KSZ80xxMarek Vasut
There is no such part as KS8001, KS8041 or KS8051. There are only KSZ8001, KSZ8041 and KSZ8051. Rename these parts as such to match the Micrel naming. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David J. Choi <david.choi@micrel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-24tile: gxio iorpc numbering change for TRIO interfaceChris Metcalf
An ABI numbering change was made in the hypervisor for Tilera's 4.1 MDE release (just shipped). It's incompatible with the previous 4.0 release ABI numbering, so we track the new numbering going forward. We plan to avoid modifying ABI numbering for these interfaces again. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-09-24c6x: use asm-generic/barrier.hMark Salter
A recent patch in the linux-next tree caused a build failure on C6X because C6X didn't define a read_barrier_depends() macro. C6X does not support SMP and the architecture doesn't provide any special memory ordering instructions, so it makes sense to just use the generic barrier.h rather than patching the existing c6x specific header. Signed-off-by: Mark Salter <msalter@redhat.com>
2012-09-24xen/boot: Disable NUMA for PV guests.Konrad Rzeszutek Wilk
The hypervisor is in charge of allocating the proper "NUMA" memory and dealing with the CPU scheduler to keep them bound to the proper NUMA node. The PV guests (and PVHVM) have no inkling of where they run and do not need to know that right now. In the future we will need to inject NUMA configuration data (if a guest spans two or more NUMA nodes) so that the kernel can make the right choices. But those patches are not yet present. In the meantime, disable the NUMA capability in the PV guest, which also fixes a bootup issue. Andre says: "we see Dom0 crashes due to the kernel detecting the NUMA topology not by ACPI, but directly from the northbridge (CONFIG_AMD_NUMA). This will detect the actual NUMA config of the physical machine, but will crash about the mismatch with Dom0's virtual memory. Variation of the theme: Dom0 sees what it's not supposed to see. This happens with the said config option enabled and on a machine where this scanning is still enabled (K8 and Fam10h, not Bulldozer class) We have this dump then: NUMA: Warning: node ids are out of bound, from=-1 to=-1 distance=10 Scanning NUMA topology in Northbridge 24 Number of physical nodes 4 Node 0 MemBase 0000000000000000 Limit 0000000040000000 Node 1 MemBase 0000000040000000 Limit 0000000138000000 Node 2 MemBase 0000000138000000 Limit 00000001f8000000 Node 3 MemBase 00000001f8000000 Limit 0000000238000000 Initmem setup node 0 0000000000000000-0000000040000000 NODE_DATA [000000003ffd9000 - 000000003fffffff] Initmem setup node 1 0000000040000000-0000000138000000 NODE_DATA [0000000137fd9000 - 0000000137ffffff] Initmem setup node 2 0000000138000000-00000001f8000000 NODE_DATA [00000001f095e000 - 00000001f0984fff] Initmem setup node 3 00000001f8000000-0000000238000000 Cannot find 159744 bytes in node 3 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96 Pid: 0, comm: swapper Not tainted 3.3.6 #1 AMD Dinar/Dinar RIP: e030:[<ffffffff81d220e6>] [<ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96 .. snip.. [<ffffffff81d23024>] sparse_early_usemaps_alloc_node+0x64/0x178 [<ffffffff81d23348>] sparse_init+0xe4/0x25a [<ffffffff81d16840>] paging_init+0x13/0x22 [<ffffffff81d07fbb>] setup_arch+0x9c6/0xa9b [<ffffffff81683954>] ? printk+0x3c/0x3e [<ffffffff81d01a38>] start_kernel+0xe5/0x468 [<ffffffff81d012cf>] x86_64_start_reservations+0xba/0xc1 [<ffffffff81007153>] ? xen_setup_runstate_info+0x2c/0x36 [<ffffffff81d050ee>] xen_start_kernel+0x565/0x56c " so we just disable NUMA scanning by setting numa_off=1. CC: stable@vger.kernel.org Reported-and-Tested-by: Andre Przywara <andre.przywara@amd.com> Acked-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-24ARM: dma-mapping: Fix potential memory leak in atomic_pool_init()Sachin Kamat
When either of __alloc_from_contiguous or __alloc_remap_buffer fails to provide a valid pointer, allocated memory is freed up and an error is returned. 'pages' was however not freed before returning error. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-09-23Merge branch 'rc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fixes from Michal Marek: "There are two more kbuild fixes for 3.6. One fixes a race between x86's archscripts target and the rule (re)building scripts/basic/fixdep. The second is a fix for the previous attempt at fixing make firmware_install with make 3.82. This new solution should work with any version of GNU make" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: x86/kbuild: archscripts depends on scripts_basic firmware: fix directory creation rule matching with make 3.80
2012-09-22Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Random fixes across arch/mips, essentially. One fix for an issue in get_user_pages_fast() which previously was discovered on x86, a miscalculation in the support for the MIPS MT hardware multithreading support, the RTC support for the Malta and a fix for a spurious interrupt issue that seems to bite only very special Malta configurations." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Malta: Don't crash on spurious interrupt. MIPS: Malta: Remove RTC Data Mode bootstrap breakage MIPS: mm: Add compound tail page _mapcount when mapped MIPS: CMP/SMTC: Fix tc_id calculation
2012-09-22Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM and clkdev fixes from Russell King: "Two patches for clkdev which resolve the long standing issue that the devm_* versions were dependent on clkdev, which they shouldn't have been. Instead, they're dependent on HAVE_CLK instead, which implies that you're providing clk_get() and clk_put(). A small fix to the ARM decompressor to ensure that the page tables are properly interpreted by the CPU, and reserve syscall 378 for kcmp (the checksyscalls.sh script is unfortunately currently broken so arch maintainers aren't getting notified of new syscalls...) Lastly, a larger fix for an issue between the common clk subsystem and smp_twd which causes warnings to be spat out." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: reserve syscall 378 for kcmp ARM: 7535/1: Reprogram smp_twd based on new common clk framework notifiers ARM: 7537/1: clk: Fix release in devm_clk_put() ARM: 7532/1: decompressor: reset SCTLR.TRE for VMSA ARMv7 cores ARM: 7534/1: clk: Make the managed clk functions generically available
2012-09-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc updates from David Miller: 1) Debugging builds on 32-bit sparc need to handle the R_SPARC_DISP32 relocation, not just 64-bit sparc. From Andreas Larsson. 2) Wei Yongjun noticed that module_alloc() on sparc can return an error pointer, but that's not allowed. module_alloc() should return only a valid pointer, or NULL. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: fix the return value of module_alloc() sparc32: Enable the relocation target R_SPARC_DISP32 for sparc32
2012-09-21Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Small fixlets" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/init.c: Fix devmem_is_allowed() off by one x86/kconfig: Remove outdated reference to Intel CPUs in CONFIG_SWIOTLB
2012-09-21Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Small perf fixlets" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing: Don't call page_to_pfn() if page is NULL perf/x86: Fix Intel Ivy Bridge support perf/x86/ibs: Check syscall attribute flags perf/x86: Export Sandy Bridge uncore clockticks event in sysfs
2012-09-21Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc bug fixes from Olof Johansson: "A couple of samsung clock locking fixes, at91 device tree gpio configuration fix and a couple more for shmobile and i.MX. All small targeted fixes." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM i.MX25: Make timer irq work again ARM: imx: armadillo5x0: Fix illegal register access ARM: shmobile: kzm9g: bugfix: correct mmcif interrupt settings ARM: SAMSUNG: Use spin_lock_{irqsave,irqrestore} in clk_set_rate ARM: at91: fix missing #interrupt-cells on gpio-controller ARM: SAMSUNG: use spin_lock_irqsave() in clk_set_parent
2012-09-21sparc: fix the return value of module_alloc()Wei Yongjun
In case of error, function module_alloc() in other platform never returns ERR_PTR(), and all of the user only check for NULL, so we'd better return NULL instead of ERR_PTR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21sparc32: Enable the relocation target R_SPARC_DISP32 for sparc32Andreas Larsson
GNU Binutils 2.20.1 generates .eh_frame sections that uses R_SPARC_DISP32. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Bug fixes for 3.6-rc7, including some important patches for large page related memory management issues." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: fix read unit address configuration loop s390/dasd: fix pathgroup race s390/mm: fix user access page-table walk code s390/hwcaps: do not report high gprs for 31 bit kernel s390/cio: invalidate cdev pointer before deregistration s390/cio: fix IO subchannel event race s390/dasd: move wake_up call s390/hugetlb: use direct TLB flushing for hugetlbfs pages s390/mm: fix deadlock in unmap_hugepage_range()
2012-09-21Merge tag 'stable/for-linus-3.6-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - Fix M2P batching re-using the incorrect structure field. In v3.5 we added batching for M2P override (Machine Frame Number -> Physical Frame Number), but the original MFN was saved in an incorrect structure - and we would oops/restore when restoring with the old MFN. - Disable BIOS SMP MP table search. A bootup issue that we had ignored until we found that on DL380 G6 it was needed. * tag 'stable/for-linus-3.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/boot: Disable BIOS SMP MP table search. xen/m2p: do not reuse kmap_op->dev_bus_addr
2012-09-21ARM: reserve syscall 378 for kcmpRussell King
kcmp has appeared on x86, but has not been noticed because checksyscalls.sh is broken at the moment. Reserve ARM syscall 378 for this should we ever need it, and add an __IGNORE entry for this unimplemented syscall. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-21x86/kbuild: archscripts depends on scripts_basicJeff Mahoney
While building the SUSE kernel packages, which build the scripts, make clean, and then build everything, we have been running into spurious build failures. We tracked them down to a simple dependency issue: $ make mrproper CLEAN arch/x86/tools CLEAN scripts/basic $ cp patches/config/x86_64/desktop .config $ make archscripts HOSTCC arch/x86/tools/relocs /bin/sh: scripts/basic/fixdep: No such file or directory make[3]: *** [arch/x86/tools/relocs] Error 1 make[2]: *** [archscripts] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 This was introduced by commit 6520fe55 (x86, realmode: 16-bit real-mode code support for relocs), which added the archscripts dependency to archprepare. This patch adds the scripts_basic dependency to the x86 archscripts. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-09-19Merge branch 'clkdev' into fixesRussell King
2012-09-19ARM: 7535/1: Reprogram smp_twd based on new common clk framework notifiersMike Turquette
Running cpufreq driver on imx6q, the following warning is seen. $ BUG: sleeping function called from invalid context at kernel/mutex.c:269 <snip> stack backtrace: Backtrace: [<80011d64>] (dump_backtrace+0x0/0x10c) from [<803fc164>] (dump_stack+0x18/0x1c) r6:bf8142e0 r5:bf814000 r4:806ac794 r3:bf814000 [<803fc14c>] (dump_stack+0x0/0x1c) from [<803fd444>] (print_usage_bug+0x250/0x2b 8) [<803fd1f4>] (print_usage_bug+0x0/0x2b8) from [<80060f90>] (mark_lock+0x56c/0x67 0) [<80060a24>] (mark_lock+0x0/0x670) from [<80061a20>] (__lock_acquire+0x98c/0x19b 4) [<80061094>] (__lock_acquire+0x0/0x19b4) from [<80062f14>] (lock_acquire+0x68/0x 7c) [<80062eac>] (lock_acquire+0x0/0x7c) from [<80400f28>] (mutex_lock_nested+0x78/0 x344) r7:00000000 r6:bf872000 r5:805cc858 r4:805c2a04 [<80400eb0>] (mutex_lock_nested+0x0/0x344) from [<803089ac>] (clk_get_rate+0x1c/ 0x58) [<80308990>] (clk_get_rate+0x0/0x58) from [<80013c48>] (twd_update_frequency+0x1 8/0x50) r5:bf253d04 r4:805cadf4 [<80013c30>] (twd_update_frequency+0x0/0x50) from [<80068e20>] (generic_smp_call _function_single_interrupt+0xd4/0x13c) r4:bf873ee0 r3:80013c30 [<80068d4c>] (generic_smp_call_function_single_interrupt+0x0/0x13c) from [<80013 34c>] (handle_IPI+0xc0/0x194) r8:00000001 r7:00000000 r6:80574e48 r5:bf872000 r4:80593958 [<8001328c>] (handle_IPI+0x0/0x194) from [<800084e8>] (gic_handle_irq+0x58/0x60) r8:00000000 r7:bf873f8c r6:bf873f58 r5:80593070 r4:f4000100 r3:00000005 [<80008490>] (gic_handle_irq+0x0/0x60) from [<8000e124>] (__irq_svc+0x44/0x60) Exception stack(0xbf873f58 to 0xbf873fa0) 3f40: 00000001 00000001 3f60: 00000000 bf814000 bf872000 805cab48 80405aa4 80597648 00000000 412fc09a 3f80: bf872000 bf873fac bf873f70 bf873fa0 80063844 8000f1f8 20000013 ffffffff r6:ffffffff r5:20000013 r4:8000f1f8 r3:bf814000 [<8000f1b8>] (default_idle+0x0/0x4c) from [<8000f428>] (cpu_idle+0x98/0x114) [<8000f390>] (cpu_idle+0x0/0x114) from [<803f9834>] (secondary_start_kernel+0x11 c/0x140) [<803f9718>] (secondary_start_kernel+0x0/0x140) from [<103f9234>] (0x103f9234) r6:10c03c7d r5:0000001f r4:4f86806a r3:803f921c It looks that the warning is caused by that twd_update_frequency() gets called from an atomic context while it calls clk_get_rate() where a mutex gets held. To fix the warning, let's convert common clk users over to clk notifiers in place of CPUfreq notifiers. This works out nicely for Cortex-A9 MPcore designs that scale all CPUs at the same frequency. Platforms that have not been converted to the common clk framework and support CPUfreq will rely on the old mechanism. Once these platforms are converted over fully then we can remove the CPUfreq-specific bits for good. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-19xen/boot: Disable BIOS SMP MP table search.Konrad Rzeszutek Wilk
As the initial domain we are able to search/map certain regions of memory to harvest configuration data. For all low-level we use ACPI tables - for interrupts we use exclusively ACPI _PRT (so DSDT) and MADT for INT_SRC_OVR. The SMP MP table is not used at all. As a matter of fact we do not even support machines that only have SMP MP but no ACPI tables. Lets follow how Moorestown does it and just disable searching for BIOS SMP tables. This also fixes an issue on HP Proliant BL680c G5 and DL380 G6: 9f->100 for 1:1 PTE Freeing 9f-100 pfn range: 97 pages freed 1-1 mapping on 9f->100 .. snip.. e820: BIOS-provided physical RAM map: Xen: [mem 0x0000000000000000-0x000000000009efff] usable Xen: [mem 0x000000000009f400-0x00000000000fffff] reserved Xen: [mem 0x0000000000100000-0x00000000cfd1dfff] usable .. snip.. Scan for SMP in [mem 0x00000000-0x000003ff] Scan for SMP in [mem 0x0009fc00-0x0009ffff] Scan for SMP in [mem 0x000f0000-0x000fffff] found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff8800000f4fa0] (XEN) mm.c:908:d0 Error getting mfn 100 (pfn 5555555555555555) from L1 entry 0000000000100461 for l1e_owner=0, pg_owner=0 (XEN) mm.c:4995:d0 ptwr_emulate: could not get_page_from_l1e() BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81ac07e2>] xen_set_pte_init+0x66/0x71 . snip.. Pid: 0, comm: swapper Not tainted 3.6.0-rc6upstream-00188-gb6fb969-dirty #2 HP ProLiant BL680c G5 .. snip.. Call Trace: [<ffffffff81ad31c6>] __early_ioremap+0x18a/0x248 [<ffffffff81624731>] ? printk+0x48/0x4a [<ffffffff81ad32ac>] early_ioremap+0x13/0x15 [<ffffffff81acc140>] get_mpc_size+0x2f/0x67 [<ffffffff81acc284>] smp_scan_config+0x10c/0x136 [<ffffffff81acc2e4>] default_find_smp_config+0x36/0x5a [<ffffffff81ac3085>] setup_arch+0x5b3/0xb5b [<ffffffff81624731>] ? printk+0x48/0x4a [<ffffffff81abca7f>] start_kernel+0x90/0x390 [<ffffffff81abc356>] x86_64_start_reservations+0x131/0x136 [<ffffffff81abfa83>] xen_start_kernel+0x65f/0x661 (XEN) Domain 0 crashed: 'noreboot' set - not rebooting. which is that ioremap would end up mapping 0xff using _PAGE_IOMAP (which is what early_ioremap sticks as a flag) - which meant we would get MFN 0xFF (pte ff461, which is OK), and then it would also map 0x100 (b/c ioremap tries to get page aligned request, and it was trying to map 0xf4fa0 + PAGE_SIZE - so it mapped the next page) as _PAGE_IOMAP. Since 0x100 is actually a RAM page, and the _PAGE_IOMAP bypasses the P2M lookup we would happily set the PTE to 1000461. Xen would deny the request since we do not have access to the Machine Frame Number (MFN) of 0x100. The P2M[0x100] is for example 0x80140. CC: stable@vger.kernel.org Fixes-Oracle-Bugzilla: https://bugzilla.oracle.com/bugzilla/show_bug.cgi?id=13665 Acked-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-19Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: Fix up TIF_NOTIFY_RESUME sans TIF_SIGPENDING handling. sh: pfc: Release spinlock in sh_pfc_gpio_request_enable() error path sh: intc: Fix up multi-evt irq association.
2012-09-19perf/x86: Fix Intel Ivy Bridge supportStephane Eranian
This patch updates the existing Intel IvyBridge (model 58) support with proper PEBS event constraints. It cannot reuse the same as SandyBridge because some events (0xd3) are specific to IvyBridge. Also there is no UOPS_DISPATCHED.THREAD on IVB, so do not populate the PERF_COUNT_HW_STALLED_CYCLES_BACKEND mapping. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: ak@linux.intel.com Link: http://lkml.kernel.org/r/20120910230701.GA5898@quad Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-18Merge tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into fixesOlof Johansson
From Sascha Hauer: ARM i.MX: Two fixes for i.MX - armadillo5x0 board broken since v3.5 (stable material) - i.MX25 Architecture broken since v3.6-rc1 * tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: ARM i.MX25: Make timer irq work again ARM: imx: armadillo5x0: Fix illegal register access
2012-09-18ARM i.MX25: Make timer irq work againSascha Hauer
Since i.MX has SPARSE_IRQ enabled the i.MX25 timer is broken. This is because the internal irqs now start at an offset of NR_IRQS_LEGACY. The patch fixed this up, but missed the i.MX25 timer which used a hardcoded value instead of a define. This patch introduces a define for the timer irq and uses it. This is broken since introduced with 3.6-rc1: | commit 8842a9e2869cae14bbb8184004a42fc3070587fb | Author: Shawn Guo <shawn.guo@linaro.org> | Date: Thu Jun 14 11:16:14 2012 +0800 | | ARM: imx: enable SPARSE_IRQ for imx platform Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-18ARM: imx: armadillo5x0: Fix illegal register accessFabio Estevam
Since commit eb92044eb (ARM i.MX3: Make ccm base address a variable ) it is necessary to pass the CCM register base as a variable. Fix the CCM register access in mach-armadillo5x0 by passing mx3_ccm_base and avoid illegal accesses. Also applies to v3.5 Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org
2012-09-18Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson
From Nicolas Ferre: Modify AT91 device tree files for making the GPIO interrupts work. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: fix missing #interrupt-cells on gpio-controller
2012-09-18Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: kzm9g: bugfix: correct mmcif interrupt settings
2012-09-18Merge branch 'v3.6-samsung-fixes-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.6-samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Use spin_lock_{irqsave,irqrestore} in clk_set_rate ARM: SAMSUNG: use spin_lock_irqsave() in clk_set_parent
2012-09-18sh: Fix up TIF_NOTIFY_RESUME sans TIF_SIGPENDING handling.Al Viro
As Al notes, we missed a TIF_NOTIFY_RESUME check which caused any handlers without TIF_SIGPENDING also set to skip the notification: Looks like while it is in the relevant masks *and* checked in do_notify_resume() both on 32bit and 64bit variants since commit ab99c733ae73cce31f2a2434f7099564e5a73d95 ("sh: Make syscall tracer use tracehook notifiers, add TIF_NOTIFY_RESUME.") they are actually *not* reached without simulataneous SIGPENDING, since the actual glue in the callers had not been updated back then and still checks for _TIF_SIGPENDING alone when deciding whether to hit do_notify_resume() or not. Reported-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-09-18ARM: shmobile: kzm9g: bugfix: correct mmcif interrupt settingsTetsuyuki Kobayashi
Correct interrupt settings of sh_mmc:int and sh_mmc:error in board-kzm9g.c. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-18ARM: SAMSUNG: Use spin_lock_{irqsave,irqrestore} in clk_set_rateTushar Behera
The spinlock clocks_lock can be held during ISR, hence it is not safe to hold that lock with disabling interrupts. It fixes following potential deadlock. ========================================================= [ INFO: possible irq lock inversion dependency detected ] 3.6.0-rc4+ #2 Not tainted --------------------------------------------------------- swapper/0/1 just changed the state of lock: (&(&host->lock)->rlock){-.....}, at: [<c027fb0d>] sdhci_irq+0x15/0x564 but this lock took another, HARDIRQ-unsafe lock in the past: (clocks_lock){+.+...} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(clocks_lock); local_irq_disable(); lock(&(&host->lock)->rlock); lock(clocks_lock); <Interrupt> lock(&(&host->lock)->rlock); *** DEADLOCK *** Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-17ARM: at91: fix missing #interrupt-cells on gpio-controllerJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Tested-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-09-17s390/mm: fix user access page-table walk codeGerald Schaefer
The s390 page-table walk code, used for user copy and futex, currently cannot handle huge pages. As far as user copy is concerned, that is not really a problem because those functions will only be used on old hardware that has no huge page support. But the futex code will also use pagetable walk functions on current hardware when user space runs in primary space mode. So, if a futex sits in a huge page, the futex operation on it will result in a page fault loop or even data corruption. This patch adds the code for resolving huge page mappings in the user access pagetable walk code on s390. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-17ARM: SAMSUNG: use spin_lock_irqsave() in clk_set_parentMandeep Singh Baines
From 0cdf3aff, "ARM: SAMSUNG: use spin_lock_irqsave() in clk_{enable,disable}": The clk_enable()and clk_disable() can be used process and ISR either. And actually it is used for real product and other platforms use it now. So spin_lock_irqsave() should be used instead. We need to make a similar change in clk_set_parent(). Otherwise, you can potentially get spinlock recursion: BUG: spinlock recursion on CPU#0, kinteractive/68 lock: 807832a8, .magic: dead4ead, .owner: kinteractive/68, .owner_cpu: 0 [<80015f54>] (unwind_backtrace+0x0/0x128) from [<804f2914>] (dump_stack+0x20/0x24) [<804f2914>] (dump_stack+0x20/0x24) from [<804f57b8>] (spin_dump+0x80/0x94) [<804f57b8>] (spin_dump+0x80/0x94) from [<804f57f8>] (spin_bug+0x2c/0x30) [<804f57f8>] (spin_bug+0x2c/0x30) from [<80222730>] (do_raw_spin_lock+0x54/0x150) [<80222730>] (do_raw_spin_lock+0x54/0x150) from [<804f96ec>] (_raw_spin_lock_irqsave+0x20/0x28) [<804f96ec>] (_raw_spin_lock_irqsave+0x20/0x28) from [<80022ea4>] (clk_enable+0x3c/0x84) [<80022ea4>] (clk_enable+0x3c/0x84) from [<8038336c>] (s5p_mfc_clock_on+0x60/0x74) [<8038336c>] (s5p_mfc_clock_on+0x60/0x74) from [<8038645c>] (s5p_mfc_read_info+0x20/0x38) [<8038645c>] (s5p_mfc_read_info+0x20/0x38) from [<8037ca3c>] (s5p_mfc_handle_frame+0x2e4/0x4bc) [<8037ca3c>] (s5p_mfc_handle_frame+0x2e4/0x4bc) from [<8037d420>] (s5p_mfc_irq+0x1ec/0x6cc) [<8037d420>] (s5p_mfc_irq+0x1ec/0x6cc) from [<8007fc74>] (handle_irq_event_percpu+0x8c/0x244) [<8007fc74>] (handle_irq_event_percpu+0x8c/0x244) from [<8007fe78>] (handle_irq_event+0x4c/0x6c) [<8007fe78>] (handle_irq_event+0x4c/0x6c) from [<80082dd8>] (handle_fasteoi_irq+0xe4/0x150) [<80082dd8>] (handle_fasteoi_irq+0xe4/0x150) from [<8007f424>] (generic_handle_irq+0x3c/0x50) [<8007f424>] (generic_handle_irq+0x3c/0x50) from [<8000f7c4>] (handle_IRQ+0x88/0xc8) [<8000f7c4>] (handle_IRQ+0x88/0xc8) from [<80008564>] (gic_handle_irq+0x44/0x68) [<80008564>] (gic_handle_irq+0x44/0x68) from [<8000e400>] (__irq_svc+0x40/0x60) Exception stack(0xef3cbe68 to 0xef3cbeb0) [<8000e400>] (__irq_svc+0x40/0x60) from [<80022cfc>] (clk_set_parent+0x30/0x74) [<80022cfc>] (clk_set_parent+0x30/0x74) from [<803ac7f8>] (set_apll.isra.0+0x28/0xb0) [<803ac7f8>] (set_apll.isra.0+0x28/0xb0) from [<803ac8e4>] (exynos5250_set_frequency+0x64/0xb8) [<803ac8e4>] (exynos5250_set_frequency+0x64/0xb8) from [<803ac280>] (exynos_target+0x1b0/0x220) [<803ac280>] (exynos_target+0x1b0/0x220) from [<803a4a0c>] (__cpufreq_driver_target+0xb0/0xd4) [<803a4a0c>] (__cpufreq_driver_target+0xb0/0xd4) from [<803aab80>] (cpufreq_interactive_updown_task+0x214/0x264) [<803aab80>] (cpufreq_interactive_updown_task+0x214/0x264) from [<80047d04>] (kthread+0x9c/0xa8) [<80047d04>] (kthread+0x9c/0xa8) from [<8000fa48>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Suggested-by: Sunil Mazhavanchery <sunilm@samsung.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Minho Ban <mhban@samsung.com> Cc: Jaecheol Lee <jc.lee@samsung.com> Cc: Sunyoung Kang <sy0816.kang@samsung.com> Cc: Olof Johansson <olofj@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-17MIPS: Malta: Don't crash on spurious interrupt.Ralf Baechle
48d480b0bde794781fcae9501fb043c1bac0e523 [[MIPS] Malta: Fix off by one bug in interrupt handler.] did not take in account that irq_ffs() will also return 0 if for some reason the set of pending interrupts happens to be empty. This is trivial to trigger with a RM5261 CPU module running a 64-bit kernel and results in something like the following: CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff801772d0, ra == ffffffff8017ad24 Oops[#1]: Cpu 0 $ 0 : 0000000000000000 ffffffff9000a4e0 ffffffff9000a4e0 ffffffff9000a4e0 $ 4 : ffffffff80592be0 0000000000000000 00000000000000d6 ffffffff80322ed0 $ 8 : ffffffff805fe538 0000000000000000 ffffffff9000a4e0 ffffffff80590000 $12 : 00000000000000d6 0000000000000000 ffffffff80600000 ffffffff805fe538 $16 : 0000000000000000 0000000000000010 ffffffff80592be0 0000000000000010 $20 : 0000000000000000 0000000000500001 0000000000000000 ffffffff8051e078 $24 : 0000000000000028 ffffffff803226e8 $28 : 9800000003828000 980000000382b900 ffffffff8051e060 ffffffff8017ad24 Hi : 0000000000000000 Lo : 0000006388974000 epc : ffffffff801772d0 handle_irq_event_percpu+0x70/0x2f0 Not tainted ra : ffffffff8017ad24 handle_percpu_irq+0x54/0x88 Status: 9000a4e2 KX SX UX KERNEL EXL Cause : 00808008 BadVA : 0000000000000000 PrId : 000028a0 (Nevada) Modules linked in: Process init (pid: 1, threadinfo=9800000003828000, task=9800000003827968, tls=0000000077087490) Stack : ffffffff80592be0 ffffffff8058d248 0000000000000040 0000000000000000 ffffffff80613340 0000000000500001 ffffffff805a0000 0000000000000882 9800000003b89000 ffffffff8017ad24 00000000000000d5 0000000000000010 ffffffff9000a4e1 ffffffff801769f4 ffffffff9000a4e0 ffffffff801037f8 0000000000000000 ffffffff80101c44 0000000000000000 ffffffff9000a4e0 0000000000000000 9000000018000000 90000000180003f9 0000000000000001 0000000000000000 00000000000000ff 0000000000000018 0000000000000001 0000000000000001 00000000003fffff 0000000000000020 ffffffff802cf7ac ffffffff80208918 000000007fdadf08 ffffffff80612d88 ffffffff9000a4e1 0000000000000040 0000000000000000 ffffffff80613340 0000000000500001 ... Call Trace: [<ffffffff801772d0>] handle_irq_event_percpu+0x70/0x2f0 [<ffffffff8017ad24>] handle_percpu_irq+0x54/0x88 [<ffffffff801769f4>] generic_handle_irq+0x44/0x60 [<ffffffff801037f8>] do_IRQ+0x48/0x70 [<ffffffff80101c44>] ret_from_irq+0x0/0x4 [<ffffffff80326170>] serial8250_startup+0x310/0x870 [<ffffffff8032175c>] uart_startup.part.7+0x9c/0x330 [<ffffffff80321b4c>] uart_open+0x15c/0x1b0 [<ffffffff80302034>] tty_open+0x1fc/0x720 [<ffffffff801bffac>] chrdev_open+0x7c/0x180 [<ffffffff801b9ab8>] do_dentry_open.isra.14+0x288/0x390 [<ffffffff801bac5c>] nameidata_to_filp+0x5c/0xc0 [<ffffffff801ca700>] do_last.isra.33+0x330/0x8f0 [<ffffffff801caf3c>] path_openat+0xbc/0x440 [<ffffffff801cb3c8>] do_filp_open+0x38/0xa8 [<ffffffff801bade4>] do_sys_open+0x124/0x218 [<ffffffff80110538>] handle_sys+0x118/0x13c Code: 02d5a825 12800012 02a0b02d <de820000> de850008 0040f809 0220202d 0040a82d 40026000 ---[ end trace 5d8e7b9a86badd2d ]--- Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Ralf Baechle <ralf@linux-mips.org>