diff options
author | Srinivas Kandagatla <srinivas.kandagatla@linaro.org> | 2015-09-01 11:54:39 +0100 |
---|---|---|
committer | Srinivas Kandagatla <srinivas.kandagatla@linaro.org> | 2015-09-01 11:54:39 +0100 |
commit | 8c23d5ec9e7b544bbdfbe624219eb892a22b9862 (patch) | |
tree | 65b212e69d1b568dfb31546613b817c0edf773a5 /Documentation | |
parent | 9f12ae3a01270cbe7fbc875c528b0d5288ea8eea (diff) | |
parent | d738cc93031d2e00f1f8bb570b186cb5b07ff6ae (diff) |
Merge branch 'tracking-qcomlt-usb' into integration-linux-qcomlt
* tracking-qcomlt-usb:
usb: phy: msm: Add D+/D- lines route control
usb: phy: msm: Trigger USB state detection work in DRD mode
usb: phy: msm: Ensure that workers are initialized before use
usb: phy: msm: Disable driver runtime PM
usb: phy: msm: HACK: Make Vddc configuration optional
usb: chipidea: Use extcon framework for VBUS and ID detect
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 6 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/usb/msm-hsusb.txt | 4 |
2 files changed, 10 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 553e2fae3a76..b423e0d282a0 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -30,6 +30,11 @@ Optional properties: argument that indicate usb controller index - disable-over-current: (FSL only) disable over current detect - external-vbus-divider: (FSL only) enables off-chip resistor divider for Vbus +- extcon: phandles to external connector devices. First phandle should point to + external connector, which provide "USB" cable events, the second should point + to external connector device, which provide "USB-HOST" cable events. If one + of the external connector devices is not required, empty <0> phandle should + be specified. Example: @@ -41,4 +46,5 @@ Example: phys = <&usb_phy0>; phy-names = "usb-phy"; vbus-supply = <®_usb0_vbus>; + extcon = <0>, <&usb_id>; }; diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt index bd8d9e753029..8654a3ec23e4 100644 --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -52,6 +52,10 @@ Required properties: Optional properties: - dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" +- switch-gpio: A phandle + gpio-specifier pair. Some boards are using Dual + SPDT USB Switch, witch is cotrolled by GPIO to de/multiplex + D+/D- USB lines between connectors. + - qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device Mode Eye Diagram test. Start address at which these values will be written is ULPI_EXT_VENDOR_SPECIFIC. Value of -1 is reserved as |