From 0ea6e61122196509af82cc4f36cbdaacbefb8227 Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Fri, 23 Jul 2010 20:51:24 -0700 Subject: Documentation: update broken web addresses. Below you will find an updated version from the original series bunching all patches into one big patch updating broken web addresses that are located in Documentation/* Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult, the best way to deal with these is to use web.archive.org to locate these addresses that are outdated. Now there are also some addresses pointing to .spec files some are located, but some(after searching on the companies site)where still no where to be found. In this case I just changed the address to the company site this way the users can contact the company and they can locate them for the users. Signed-off-by: Justin P. Mattock Signed-off-by: Thomas Weber Signed-off-by: Mike Frysinger Cc: Paulo Marques Cc: Randy Dunlap Cc: Michael Neuling Signed-off-by: Jiri Kosina --- Documentation/arm/IXP2000 | 2 +- Documentation/arm/IXP4xx | 14 ++++++-------- Documentation/arm/README | 4 ++-- Documentation/arm/SA1100/Assabet | 5 ++--- Documentation/arm/SA1100/Brutus | 2 +- Documentation/arm/SA1100/FreeBird | 2 +- Documentation/arm/SA1100/GraphicsClient | 2 +- Documentation/arm/SA1100/GraphicsMaster | 2 +- Documentation/arm/SA1100/Itsy | 2 +- Documentation/arm/SA1100/PLEB | 2 +- Documentation/arm/SA1100/Victor | 2 +- Documentation/arm/SA1100/nanoEngine | 2 +- 12 files changed, 19 insertions(+), 22 deletions(-) (limited to 'Documentation/arm') diff --git a/Documentation/arm/IXP2000 b/Documentation/arm/IXP2000 index e0148b6b2c40..68d21d92a30b 100644 --- a/Documentation/arm/IXP2000 +++ b/Documentation/arm/IXP2000 @@ -14,7 +14,7 @@ telecom systems. In addition to an XScale core, it contains up to 8 interfaces (UTOPIA, SPI, etc), a PCI host bridge, one serial port, flash interface, and some other odds and ends. For more information, see: -http://developer.intel.com/design/network/products/npfamily/ixp2xxx.htm +http://developer.intel.com 2. Linux Support diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/IXP4xx index 72fbcc4fcab0..133c5fa6c7a1 100644 --- a/Documentation/arm/IXP4xx +++ b/Documentation/arm/IXP4xx @@ -45,7 +45,7 @@ require the use of Intel's propietary CSR softare: If you need to use any of the above, you need to download Intel's software from: - http://developer.intel.com/design/network/products/npfamily/ixp425swr1.htm + http://developer.intel.com/design/network/products/npfamily/ixp425.htm DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPIETARY SOFTWARE. @@ -53,7 +53,7 @@ SOFTWARE. There are several websites that provide directions/pointers on using Intel's software: -http://ixp4xx-osdg.sourceforge.net/ + http://sourceforge.net/projects/ixp4xx-osdg/ Open Source Developer's Guide for using uClinux and the Intel libraries http://gatewaymaker.sourceforge.net/ @@ -112,21 +112,21 @@ http://www.adiengineering.com/productsCoyote.html Finally, there is an IDE port hanging off the expansion bus. Gateworks Avila Network Platform -http://www.gateworks.com/avila_sbc.htm +http://www.gateworks.com/support/overview.php The Avila platform is basically and IXDP425 with the 4 PCI slots replaced with mini-PCI slots and a CF IDE interface hanging off the expansion bus. Intel IXDP425 Development Platform -http://developer.intel.com/design/network/products/npfamily/ixdp425.htm +http://www.intel.com/design/network/products/npfamily/ixdpg425.htm This is Intel's standard reference platform for the IXDP425 and is also known as the Richfield board. It contains 4 PCI slots, 16MB of flash, two 10/100 ports and one ADSL port. Intel IXDP465 Development Platform -http://developer.intel.com/design/network/products/npfamily/ixdp465.htm +http://www.intel.com/design/network/products/npfamily/ixdp465.htm This is basically an IXDP425 with an IXP465 and 32M of flash instead of just 16. @@ -141,15 +141,13 @@ Intel IXDPG425 Development Platform a pivot_root to NFS. Motorola PrPMC1100 Processor Mezanine Card -http://www.fountainsys.com/datasheet/PrPMC1100.pdf +http://www.fountainsys.com The PrPMC1100 is based on the IXCP1100 and is meant to plug into and IXP2400/2800 system to act as the system controller. It simply contains a CPU and 16MB of flash on the board and needs to be plugged into a carrier board to function. Currently Linux only supports the Motorola PrPMC carrier board for this platform. - See https://mcg.motorola.com/us/ds/pdf/ds0144.pdf for info - on the carrier board. 5. TODO LIST diff --git a/Documentation/arm/README b/Documentation/arm/README index d98783fbe0c7..aea34095cdcf 100644 --- a/Documentation/arm/README +++ b/Documentation/arm/README @@ -41,12 +41,12 @@ Bug reports etc --------------- Please send patches to the patch system. For more information, see - http://www.arm.linux.org.uk/patches/info.html Always include some + http://www.arm.linux.org.uk/developer/patches/info.php Always include some explanation as to what the patch does and why it is needed. Bug reports should be sent to linux-arm-kernel@lists.arm.linux.org.uk, or submitted through the web form at - http://www.arm.linux.org.uk/forms/solution.shtml + http://www.arm.linux.org.uk/developer/ When sending bug reports, please ensure that they contain all relevant information, eg. the kernel messages that were printed before/during diff --git a/Documentation/arm/SA1100/Assabet b/Documentation/arm/SA1100/Assabet index 91f7ce7ba426..08b885d35674 100644 --- a/Documentation/arm/SA1100/Assabet +++ b/Documentation/arm/SA1100/Assabet @@ -2,8 +2,7 @@ The Intel Assabet (SA-1110 evaluation) board ============================================ Please see: -http://developer.intel.com/design/strong/quicklist/eval-plat/sa-1110.htm -http://developer.intel.com/design/strong/guides/278278.htm +http://developer.intel.com Also some notes from John G Dorsey : http://www.cs.cmu.edu/~wearable/software/assabet.html @@ -64,7 +63,7 @@ Initial RedBoot configuration ----------------------------- The commands used here are explained in The RedBoot User's Guide available -on-line at http://sources.redhat.com/ecos/docs-latest/redboot/redboot.html. +on-line at http://sources.redhat.com/ecos/docs.html. Please refer to it for explanations. If you have a CF network card (my Assabet kit contained a CF+ LP-E from diff --git a/Documentation/arm/SA1100/Brutus b/Documentation/arm/SA1100/Brutus index b1cfd405dccc..6a3aa95e9bfd 100644 --- a/Documentation/arm/SA1100/Brutus +++ b/Documentation/arm/SA1100/Brutus @@ -1,7 +1,7 @@ Brutus is an evaluation platform for the SA1100 manufactured by Intel. For more details, see: -http://developer.intel.com/design/strong/applnots/sa1100lx/getstart.htm +http://developer.intel.com To compile for Brutus, you must issue the following commands: diff --git a/Documentation/arm/SA1100/FreeBird b/Documentation/arm/SA1100/FreeBird index eda28b3232e7..fb23b770aaf4 100644 --- a/Documentation/arm/SA1100/FreeBird +++ b/Documentation/arm/SA1100/FreeBird @@ -1,5 +1,5 @@ Freebird-1.1 is produced by Legned(C) ,Inc. -(http://www.legend.com.cn) +http://web.archive.org/web/*/http://www.legend.com.cn and software/linux mainatined by Coventive(C),Inc. (http://www.coventive.com) diff --git a/Documentation/arm/SA1100/GraphicsClient b/Documentation/arm/SA1100/GraphicsClient index 6c9c4f5a36e1..867bb35943af 100644 --- a/Documentation/arm/SA1100/GraphicsClient +++ b/Documentation/arm/SA1100/GraphicsClient @@ -71,7 +71,7 @@ Supported peripherals: - serial ports (ttyS[0-2]) - ttyS0 is default for serial console - Smart I/O (ADC, keypad, digital inputs, etc) - See http://www.applieddata.com/developers/linux for IOCTL documentation + See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation and example user space code. ps/2 keybd is multiplexed through this driver To do: diff --git a/Documentation/arm/SA1100/GraphicsMaster b/Documentation/arm/SA1100/GraphicsMaster index ee7c6595f23f..9145088a0ba2 100644 --- a/Documentation/arm/SA1100/GraphicsMaster +++ b/Documentation/arm/SA1100/GraphicsMaster @@ -28,7 +28,7 @@ Supported peripherals: - serial ports (ttyS[0-2]) - ttyS0 is default for serial console - Smart I/O (ADC, keypad, digital inputs, etc) - See http://www.applieddata.com/developers/linux for IOCTL documentation + See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation and example user space code. ps/2 keybd is multiplexed through this driver To do: diff --git a/Documentation/arm/SA1100/Itsy b/Documentation/arm/SA1100/Itsy index 3b594534323b..44b94997fa0d 100644 --- a/Documentation/arm/SA1100/Itsy +++ b/Documentation/arm/SA1100/Itsy @@ -4,7 +4,7 @@ research projects at Compaq that are related to pocket computing. For more information, see: - http://www.research.digital.com/wrl/itsy/index.html + http://www.hpl.hp.com/downloads/crl/itsy/ Notes on initial 2.4 Itsy support (8/27/2000) : The port was done on an Itsy version 1.5 machine with a daughtercard with diff --git a/Documentation/arm/SA1100/PLEB b/Documentation/arm/SA1100/PLEB index 92cae066908d..b9c8a631a351 100644 --- a/Documentation/arm/SA1100/PLEB +++ b/Documentation/arm/SA1100/PLEB @@ -6,6 +6,6 @@ PLEB support has yet to be fully integrated. For more information, see: - http://www.cse.unsw.edu.au/~pleb/ + http://www.cse.unsw.edu.au diff --git a/Documentation/arm/SA1100/Victor b/Documentation/arm/SA1100/Victor index f938a29fdc20..9cff415da5a7 100644 --- a/Documentation/arm/SA1100/Victor +++ b/Documentation/arm/SA1100/Victor @@ -3,7 +3,7 @@ VisuAide, Inc. to be used by blind people. For more information related to Victor, see: - http://www.visuaide.com/victor + http://www.humanware.com/en-usa/products Of course Victor is using Linux as its main operating system. The Victor implementation for Linux is maintained by Nicolas Pitre: diff --git a/Documentation/arm/SA1100/nanoEngine b/Documentation/arm/SA1100/nanoEngine index fc431cbfefc2..48a7934f95f6 100644 --- a/Documentation/arm/SA1100/nanoEngine +++ b/Documentation/arm/SA1100/nanoEngine @@ -7,5 +7,5 @@ for more info. (Ref: Stuart Adams ) Also visit Larry Doolittle's "Linux for the nanoEngine" site: -http://recycle.lbl.gov/~ldoolitt/bse/ +http://www.brightstareng.com/arm/nanoeng.htm -- cgit v1.2.3