aboutsummaryrefslogtreecommitdiff
path: root/net/bluetooth/hci_sock.c
AgeCommit message (Collapse)Author
2012-03-29Merge branch 'x86-x32-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x32 support for x86-64 from Ingo Molnar: "This tree introduces the X32 binary format and execution mode for x86: 32-bit data space binaries using 64-bit instructions and 64-bit kernel syscalls. This allows applications whose working set fits into a 32 bits address space to make use of 64-bit instructions while using a 32-bit address space with shorter pointers, more compressed data structures, etc." Fix up trivial context conflicts in arch/x86/{Kconfig,vdso/vma.c} * 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) x32: Fix alignment fail in struct compat_siginfo x32: Fix stupid ia32/x32 inversion in the siginfo format x32: Add ptrace for x32 x32: Switch to a 64-bit clock_t x32: Provide separate is_ia32_task() and is_x32_task() predicates x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls x86/x32: Fix the binutils auto-detect x32: Warn and disable rather than error if binutils too old x32: Only clear TIF_X32 flag once x32: Make sure TS_COMPAT is cleared for x32 tasks fs: Remove missed ->fds_bits from cessation use of fd_set structs internally fs: Fix close_on_exec pointer in alloc_fdtable x32: Drop non-__vdso weak symbols from the x32 VDSO x32: Fix coding style violations in the x32 VDSO code x32: Add x32 VDSO support x32: Allow x32 to be configured x32: If configured, add x32 system calls to system call tables x32: Handle process creation x32: Signal-related system calls x86: Add #ifdef CONFIG_COMPAT to <asm/sys_ia32.h> ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-03Bluetooth: Remove HCI_PI_MGMT_INIT flag for socketsJohan Hedberg
This flag is of no use right now and is in fact harmful in that it prevents the HCI_MGMT flag to be set for any controllers that may need it after the first one that bluetoothd takes into use (the flag is cleared for the first controller so any subsequent ones through the same bluetoothd mgmt socket never get the HCI_MGMT flag set). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Enable timestamps for control channelMarcel Holtmann
The control channel can be also monitored, so include timestamps here as well. And make sure management events get their timestamp when they are created. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20Bluetooth: Always enable management interfaceMarcel Holtmann
The management interface API has reached stable version 1.0 and thus it can now be always enabled. All future changes will be made backwards compatible. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20Bluetooth: Restrict access to management interfaceMarcel Holtmann
The management interface on the HCI control channel should be restricted to applications with CAP_NET_ADMIN permission. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20Bluetooth: Add support for HCI monitor channelMarcel Holtmann
The HCI monitor channel can be used to monitor all packets and events from the Bluetooth subsystem. The monitor is not bound to any specific HCI device and allows even capturing multiple devices at the same time. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20compat: Use COMPAT_USE_64BIT_TIME in the Bluetooth subsystemH. J. Lu
Enable the Bluetooth subsystem to be used with a compat ABI with 64-bit time. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo F. Padovan <padovan@profusion.mobi> Cc: David S. Miller <davem@davemloft.net>
2012-02-20Bluetooth: Remove HCI notifier handlingMarcel Holtmann
The HCI notifier handling was never used outside of Bluetooth core layer and thus remove it and replace it with direct function calls. Also move the stack internal event generation into the HCI socket layer. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20Bluetooth: Fix issue with shared SKB between HCI raw socket and driverMarcel Holtmann
Any HCI raw socket gets a copy of each SKB that is either received or send via the Bluetooth subsystem. The raw socket uses SKB clones to send out data, but the problem is that it needs to add an extra packet type byte in front of it. And some drivers need to also add an extra header before submitting the packet. So far this all worked magically fine since all of the drivers and the raw sockets are adding the same byte at the same location. But that is by pure coincidence. Since the data of cloned SKBs is shared, this means that the raw socket and driver kept writing into the shared data area. To fix this the only safe way is if the HCI raw socket creates a copy of the SKB before sending it out. To not always copy all SKBs around, the copy is only created once and only after any of the HCI filter checks succeeded. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20Bluetooth: Simplify HCI socket bind handlingMarcel Holtmann
The HCI socket bind handling checks a few too many times the channel we are binding. So centralize this and make the function easier to read. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20Bluetooth: Add HCI CMSG details only to raw socketsMarcel Holtmann
The HCI CMSG specific data is for raw sockets only. So only add them to actual raw sockets. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20Bluetooth: Lock socket when reading HCI socket optionsMarcel Holtmann
When reading the HCI raw socket option, the socket was never locked. So lock the socket and in addition return EINVAL on non raw sockets. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20Bluetooth: Limit HCI raw socket options to actual raw socketsMarcel Holtmann
Currently the socket options of HCI sockets can be set on raw and control sockets, but on control sockets they make no sense. So just return EINVAL in that case. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20Bluetooth: Split sending for HCI raw and control socketsMarcel Holtmann
The sending functions for HCI raw and control sockets have nothing in common except that they iterate over the socket list. Split them into two so they can do their job more efficient. In addition the code becomes more readable. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Add address type to mgmt blacklist messagesJohan Hedberg
This patch updates the implmentation for mgmt_block_device and mgmt_unblock_device and their corresponding events to match the latest API specification. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-01-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next
2012-01-03Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43/dma.c drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
2012-01-02Bluetooth: Remove local_bh_disable() from hci_sock.cGustavo F. Padovan
Everything is in process context now, we do not need such a call. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-19module_param: make bool parameters really bool (net & drivers/net)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. (Thanks to Joe Perches for suggesting coccinelle for 0/1 -> true/false). Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-18Bluetooth: Remove mgmt_set_service_cacheJohan Hedberg
Instead of having an explicit service cache command we can make the mgmt API simpler by implicitly enabling the cache when mgmt_read_info is called for the first time and disabling it when mgmt_set_dev_class is called. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: convert tx_task to workqueueGustavo F. Padovan
This should simplify Bluetooth core processing a lot. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Move command task to workqueueGustavo F. Padovan
As part of the moving on all the Bluetooth processing to Process context. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Replace spin_lock by mutex in hci_devGustavo F. Padovan
Now we run everything in HCI in process context, so it's a better idea use mutex instead spin_lock. The macro remains hci_dev_lock() (and I got rid of hci_dev_lock_bh()), of course. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Add mgmt events for blacklistingAntti Julku
Add management interface events for blocking/unblocking a device. Sender of the block device command gets cmd complete and other mgmt sockets get the event. Event is also sent to mgmt sockets when blocking is done with ioctl, e.g when blocking a device with hciconfig. This makes it possible for bluetoothd to track status of blocked devices when a third party block or unblocks a device. Event sending is handled in mgmt_device_blocked function which gets called from hci_blacklist_add in hci_core.c. A pending command is added in mgmt_block_device, so that it can found when sending the event - the event is not sent to the socket from which the pending command came. Locks were moved out from hci_core.c to hci_sock.c and mgmt.c, because locking is needed also for mgmt_pending_add in mgmt.c. Signed-off-by: Antti Julku <antti.julku@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-16Bluetooth: Move blacklisting functions to hci_coreAntti Julku
Move blacklisting functions to hci_core.c, so that they can be used by both management interface and hci socket interface. Signed-off-by: Antti Julku <antti.julku@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-22Bluetooth: fix build break on hci_sock.cAnand Gadiyar
Linux-next as of 20110217 complains when building for OMAP1. LD vmlinux `hci_sock_cleanup' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o `hci_sock_cleanup' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o make: *** [vmlinux] Error 1 A recent patch by Gustavo (Bluetooth: Merge L2CAP and SCO modules into bluetooth.ko) introduced this by calling the hci_sock_cleanup function in the error path of bt_init. Fix this by dropping the __exit marking for hci_sock_cleanup. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: Add support for set_powered management commandJohan Hedberg
This patch adds a set_powered command to the management interface through which the powered state of local adapters can be controlled. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-12-22Bluetooth: Improve handling of HCI control channel in bindGustavo F. Padovan
Does not allow any channel different of HCI_CHANNEL_RAW and HCI_CHANNEL_CONTROL to bind. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-12-07Bluetooth: Make hci_send_to_sock usable for management control socketsJohan Hedberg
In order to send data to management control sockets the function should: - skip checks intended for raw HCI data and stack internal events - make sure RAW HCI data or stack internal events don't go to management control sockets In order to accomplish this the patch adds a new member to the bluetooth skb private data to flag skb's that are destined for management control sockets. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-12-07Bluetooth: Add initial Bluetooth Management interface callbacksJohan Hedberg
Add initial code for handling Bluetooth Management interface messages. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-12-01Bluetooth: clean up hci codeAndrei Emeltchenko
Do not use assignment in IF condition, remove extra spaces, fixing typos, simplify code. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-07-31Bluetooth: Use list_head for HCI blacklist headDavid Miller
The bdaddr in the list root is completely unused and just taking up space. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Add blacklist support for incoming connectionsJohan Hedberg
In some circumstances it could be desirable to reject incoming connections on the baseband level. This patch adds this feature through two new ioctl's: HCIBLOCKADDR and HCIUNBLOCKADDR. Both take a simple Bluetooth address as a parameter. BDADDR_ANY can be used with HCIUNBLOCKADDR to remove all devices from the blacklist. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-28Bluetooth: Fix out of scope variable access in hci_sock_cmsg()Johann Felix Soden
The pointer data can point to the variable ctv. Access to data happens when ctv is already out of scope. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Unobfuscate tasklet_schedule usageMarcel Holtmann
The tasklet schedule function helpers are just an obfuscation. So remove them and call the schedule functions directly. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-12-03Bluetooth: Return ENETDOWN when interface is downMarcel Holtmann
Sending commands to a down interface results in a timeout while clearly it should just return ENETDOWN. When using the ioctls this works fine, but not when using the HCI sockets sendmsg interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-11-05net: pass kern to net_proto_family create functionEric Paris
The generic __sock_create function has a kern argument which allows the security system to make decisions based on if a socket is being created by the kernel or by userspace. This patch passes that flag to the net_proto_family specific create function, so it can do the same thing. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07net: mark net_proto_ops as constStephen Hemminger
All usages of structure net_proto_ops should be declared const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30net: Make setsockopt() optlen be unsigned.David S. Miller
This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-30Bluetooth: Enable per-module dynamic debug messagesMarcel Holtmann
With the introduction of CONFIG_DYNAMIC_PRINTK_DEBUG it is possible to allow debugging without having to recompile the kernel. This patch turns all BT_DBG() calls into pr_debug() to support dynamic debug messages. As a side effect all CONFIG_BT_*_DEBUG statements are now removed and some broken debug entries have been fixed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14[Bluetooth] Export details about authentication requirementsMarcel Holtmann
With the Simple Pairing support, the authentication requirements are an explicit setting during the bonding process. Track and enforce the requirements and allow higher layers like L2CAP and RFCOMM to increase them if needed. This patch introduces a new IOCTL that allows to query the current authentication requirements. It is also possible to detect Simple Pairing support in the kernel this way. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-05-02bluetooth: use get/put_unaligned_* helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-28bluetooth: replace deprecated RW_LOCK_UNLOCKED macrosRobert P. J. Day
The older RW_LOCK_UNLOCKED macros defeat lockdep state tracing so replace them with the newer __RW_LOCK_UNLOCKED macros. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05bluetooth: Make hci_sock_cleanup() return voidTobias Klauser
hci_sock_cleanup() always returns 0 and its return value isn't used anywhere in the code. Compile-tested with 'make allyesconfig && make net/bluetooth/bluetooth.ko' Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2007-11-01[NET]: Forget the zero_it argument of sk_alloc()Pavel Emelyanov
Finally, the zero_it argument can be completely removed from the callers and from the function prototype. Besides, fix the checkpatch.pl warnings about using the assignments inside if-s. This patch is rather big, and it is a part of the previous one. I splitted it wishing to make the patches more readable. Hope this particular split helped. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-22[Bluetooth] Switch from OGF+OCF to using only opcodesMarcel Holtmann
The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-10[NET]: Make socket creation namespace safe.Eric W. Biederman
This patch passes in the namespace a new socket should be created in and has the socket code do the appropriate reference counting. By virtue of this all socket create methods are touched. In addition the socket create methods are modified so that they will fail if you attempt to create a socket in a non-default network namespace. Failing if we attempt to create a socket outside of the default network namespace ensures that as we incrementally make the network stack network namespace aware we will not export functionality that someone has not audited and made certain is network namespace safe. Allowing us to partially enable network namespaces before all of the exotic protocols are supported. Any protocol layers I have missed will fail to compile because I now pass an extra parameter into the socket creation code. [ Integrated AF_IUCV build fixes from Andrew Morton... -DaveM ] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12[BLUETOOTH]: Fix non-COMPAT build of hci_sock.cDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-09[Bluetooth] Update security filter for Bluetooth 2.1Marcel Holtmann
This patch updates the HCI security filter with support for the Bluetooth 2.1 commands and events. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-10 08:38:56 +0000