aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/lguest/lguest.c7
-rw-r--r--arch/x86/lguest/boot.c55
-rw-r--r--drivers/lguest/core.c15
-rw-r--r--drivers/lguest/lguest_user.c15
-rw-r--r--drivers/lguest/page_tables.c2
5 files changed, 49 insertions, 45 deletions
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 0f23d67f958..bec5a32e409 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -486,9 +486,12 @@ static void concat(char *dst, char *args[])
unsigned int i, len = 0;
for (i = 0; args[i]; i++) {
+ if (i) {
+ strcat(dst+len, " ");
+ len++;
+ }
strcpy(dst+len, args[i]);
- strcat(dst+len, " ");
- len += strlen(args[i]) + 1;
+ len += strlen(args[i]);
}
/* In case it's empty. */
dst[len] = '\0';
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index cccb38a5965..a104c532ff7 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -84,7 +84,6 @@ struct lguest_data lguest_data = {
.blocked_interrupts = { 1 }, /* Block timer interrupts */
.syscall_vec = SYSCALL_VECTOR,
};
-static cycle_t clock_base;
/*G:037 async_hcall() is pretty simple: I'm quite proud of it really. We have a
* ring buffer of stored hypercalls which the Host will run though next time we
@@ -327,8 +326,8 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
case 1: /* Basic feature request. */
/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
*cx &= 0x00002201;
- /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, FPU. */
- *dx &= 0x07808101;
+ /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU. */
+ *dx &= 0x07808111;
/* The Host can do a nice optimization if it knows that the
* kernel mappings (addresses above 0xC0000000 or whatever
* PAGE_OFFSET is set to) haven't changed. But Linux calls
@@ -481,7 +480,7 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
{
*pmdp = pmdval;
lazy_hcall(LHCALL_SET_PMD, __pa(pmdp)&PAGE_MASK,
- (__pa(pmdp)&(PAGE_SIZE-1)), 0);
+ (__pa(pmdp)&(PAGE_SIZE-1))/4, 0);
}
/* There are a couple of legacy places where the kernel sets a PTE, but we
@@ -595,19 +594,25 @@ static unsigned long lguest_get_wallclock(void)
return lguest_data.time.tv_sec;
}
+/* The TSC is a Time Stamp Counter. The Host tells us what speed it runs at,
+ * or 0 if it's unusable as a reliable clock source. This matches what we want
+ * here: if we return 0 from this function, the x86 TSC clock will not register
+ * itself. */
+static unsigned long lguest_cpu_khz(void)
+{
+ return lguest_data.tsc_khz;
+}
+
+/* If we can't use the TSC, the kernel falls back to our "lguest_clock", where
+ * we read the time value given to us by the Host. */
static cycle_t lguest_clock_read(void)
{
unsigned long sec, nsec;
- /* If the Host tells the TSC speed, we can trust that. */
- if (lguest_data.tsc_khz)
- return native_read_tsc();
-
- /* If we can't use the TSC, we read the time value written by the Host.
- * Since it's in two parts (seconds and nanoseconds), we risk reading
- * it just as it's changing from 99 & 0.999999999 to 100 and 0, and
- * getting 99 and 0. As Linux tends to come apart under the stress of
- * time travel, we must be careful: */
+ /* Since the time is in two parts (seconds and nanoseconds), we risk
+ * reading it just as it's changing from 99 & 0.999999999 to 100 and 0,
+ * and getting 99 and 0. As Linux tends to come apart under the stress
+ * of time travel, we must be careful: */
do {
/* First we read the seconds part. */
sec = lguest_data.time.tv_sec;
@@ -622,14 +627,14 @@ static cycle_t lguest_clock_read(void)
/* Now if the seconds part has changed, try again. */
} while (unlikely(lguest_data.time.tv_sec != sec));
- /* Our non-TSC clock is in real nanoseconds. */
+ /* Our lguest clock is in real nanoseconds. */
return sec*1000000000ULL + nsec;
}
-/* This is what we tell the kernel is our clocksource. */
+/* This is the fallback clocksource: lower priority than the TSC clocksource. */
static struct clocksource lguest_clock = {
.name = "lguest",
- .rating = 400,
+ .rating = 200,
.read = lguest_clock_read,
.mask = CLOCKSOURCE_MASK(64),
.mult = 1 << 22,
@@ -637,12 +642,6 @@ static struct clocksource lguest_clock = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-/* The "scheduler clock" is just our real clock, adjusted to start at zero */
-static unsigned long long lguest_sched_clock(void)
-{
- return cyc2ns(&lguest_clock, lguest_clock_read() - clock_base);
-}
-
/* We also need a "struct clock_event_device": Linux asks us to set it to go
* off some time in the future. Actually, James Morris figured all this out, I
* just applied the patch. */
@@ -712,19 +711,8 @@ static void lguest_time_init(void)
/* Set up the timer interrupt (0) to go to our simple timer routine */
set_irq_handler(0, lguest_time_irq);
- /* Our clock structure looks like arch/x86/kernel/tsc_32.c if we can
- * use the TSC, otherwise it's a dumb nanosecond-resolution clock.
- * Either way, the "rating" is set so high that it's always chosen over
- * any other clocksource. */
- if (lguest_data.tsc_khz)
- lguest_clock.mult = clocksource_khz2mult(lguest_data.tsc_khz,
- lguest_clock.shift);
- clock_base = lguest_clock_read();
clocksource_register(&lguest_clock);
- /* Now we've set up our clock, we can use it as the scheduler clock */
- pv_time_ops.sched_clock = lguest_sched_clock;
-
/* We can't set cpumask in the initializer: damn C limitations! Set it
* here and register our timer device. */
lguest_clockevent.cpumask = cpumask_of_cpu(0);
@@ -995,6 +983,7 @@ __init void lguest_init(void)
/* time operations */
pv_time_ops.get_wallclock = lguest_get_wallclock;
pv_time_ops.time_init = lguest_time_init;
+ pv_time_ops.get_cpu_khz = lguest_cpu_khz;
/* Now is a good time to look at the implementations of these functions
* before returning to the rest of lguest_init(). */
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 7743d73768d..c632c08cbbd 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -69,11 +69,22 @@ static __init int map_switcher(void)
switcher_page[i] = virt_to_page(addr);
}
+ /* First we check that the Switcher won't overlap the fixmap area at
+ * the top of memory. It's currently nowhere near, but it could have
+ * very strange effects if it ever happened. */
+ if (SWITCHER_ADDR + (TOTAL_SWITCHER_PAGES+1)*PAGE_SIZE > FIXADDR_START){
+ err = -ENOMEM;
+ printk("lguest: mapping switcher would thwack fixmap\n");
+ goto free_pages;
+ }
+
/* Now we reserve the "virtual memory area" we want: 0xFFC00000
* (SWITCHER_ADDR). We might not get it in theory, but in practice
- * it's worked so far. */
+ * it's worked so far. The end address needs +1 because __get_vm_area
+ * allocates an extra guard page, so we need space for that. */
switcher_vma = __get_vm_area(TOTAL_SWITCHER_PAGES * PAGE_SIZE,
- VM_ALLOC, SWITCHER_ADDR, VMALLOC_END);
+ VM_ALLOC, SWITCHER_ADDR, SWITCHER_ADDR
+ + (TOTAL_SWITCHER_PAGES+1) * PAGE_SIZE);
if (!switcher_vma) {
err = -ENOMEM;
printk("lguest: could not map switcher pages high\n");
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 85d42d3d01a..2221485b077 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -241,15 +241,16 @@ static ssize_t write(struct file *file, const char __user *in,
cpu = &lg->cpus[cpu_id];
if (!cpu)
return -EINVAL;
- }
- /* Once the Guest is dead, all you can do is read() why it died. */
- if (lg && lg->dead)
- return -ENOENT;
+ /* Once the Guest is dead, you can only read() why it died. */
+ if (lg->dead)
+ return -ENOENT;
- /* If you're not the task which owns the Guest, you can only break */
- if (lg && current != cpu->tsk && req != LHREQ_BREAK)
- return -EPERM;
+ /* If you're not the task which owns the Guest, all you can do
+ * is break the Launcher out of running the Guest. */
+ if (current != cpu->tsk && req != LHREQ_BREAK)
+ return -EPERM;
+ }
switch (req) {
case LHREQ_INITIALIZE:
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index 275f23c2deb..a7f64a9d67e 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -391,7 +391,7 @@ static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(lg->pgdirs); i++)
- if (lg->pgdirs[i].gpgdir == pgtable)
+ if (lg->pgdirs[i].pgdir && lg->pgdirs[i].gpgdir == pgtable)
break;
return i;
}