summaryrefslogtreecommitdiff
path: root/OvmfPkg/Include
AgeCommit message (Collapse)Author
2020-02-10OvmfPkg/Xen: Fix various typosAntoine Coeur
Fix various typos in comments and documentation. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Julien Grall <julien@xen.org> Signed-off-by: Antoine Coeur <coeur@gmx.fr> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com> Message-Id: <20200207010831.9046-61-philmd@redhat.com>
2020-02-10OvmfPkg/Virtio: Fix few typosAntoine Coeur
Fix few typos in comments and documentation. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Antoine Coeur <coeur@gmx.fr> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com> Message-Id: <20200207010831.9046-59-philmd@redhat.com>
2020-02-05OvmfPkg/IndustryStandard: add MCH_DEFAULT_SMBASE* register macrosLaszlo Ersek
In Intel datasheet 316966-002 (the "q35 spec"), Table 5-1 "DRAM Controller Register Address Map (D0:F0)" leaves the byte register at config space offset 0x9C unused. On QEMU's Q35 board, for detecting the "SMRAM at default SMBASE" feature, firmware is expected to write MCH_DEFAULT_SMBASE_QUERY (0xFF) to offset MCH_DEFAULT_SMBASE_CTL (0x9C), and read back the register. If the value is MCH_DEFAULT_SMBASE_IN_RAM (0x01), then the feature is available, and the range mentioned below is open (accessible to code running outside of SMM). Then, once firmware writes MCH_DEFAULT_SMBASE_LCK (0x02) to the register, the MCH_DEFAULT_SMBASE_SIZE (128KB) range at 0x3_0000 (SMM_DEFAULT_SMBASE) gets closed and locked down, and the register becomes read-only. The area is reopened, and the register becomes read/write, at platform reset. Add the above-listed macros to "Q35MchIch9.h". (There are some other unused offsets in Table 5-1; for example we had scavenged 0x50 for implementing the extended TSEG feature. 0x9C is the first byte-wide register standing in isolation after 0x50.) Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Message-Id: <20200129214412.2361-4-lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2020-02-05OvmfPkg/IndustryStandard: increase vertical whitespace in Q35 macro defsLaszlo Ersek
In a subsequent patch, we'll introduce new DRAM controller macros in "Q35MchIch9.h". Their names are too long for the currently available vertical whitespace, so increase the latter first. There is no functional change in this patch ("git show -b" displays nothing). Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Message-Id: <20200129214412.2361-3-lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2020-01-29OvmfPkg/IndustryStandard: define macros for QEMU's CPU hotplug registersLaszlo Ersek
In v1.5.0, QEMU's "pc" (i440fx) board gained a "CPU present bitmap" register block. In v2.0.0, this was extended to the "q35" board. In v2.7.0, a new (read/write) register interface was laid over the "CPU present bitmap", with an option for the guest to switch the register block to the new (a.k.a. modern) interface. Both interfaces are documented in "docs/specs/acpi_cpu_hotplug.txt" in the QEMU tree. Add macros for a minimal subset of the modern interface, just so we can count the possible CPUs (as opposed to boot CPUs) in a later patch in this series. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20191022221554.14963-3-lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2019-10-04OvmfPkg: strip trailing whitespaceLeif Lindholm
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Julien Grall <julien.grall@arm.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
2019-08-21OvmfPkg: Import XENMEM_memory_map hypercall to Xen/memory.hAnthony PERARD
The informations to make a XENMEM_memory_map hypercall is copied over from the public header of the Xen Project, with the type name modified to build on OVMF. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689 Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190813113119.14804-22-anthony.perard@citrix.com>
2019-08-21OvmfPkg/XenHypercallLib: Enable it in PEIMAnthony PERARD
Allow to use Xen hypercalls earlier, during the PEIM stage, but XenHypercallLibInit() must be called once the XenInfo HOB is created with the HyperPage setup. Change the return value of XenHypercallLibInit so failure can be detected when the call shouldn't fail, but still have the constructor always succeed. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689 Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190813113119.14804-17-anthony.perard@citrix.com>
2019-08-21OvmfPkg/Library/XenPlatformLib: New libraryAnthony PERARD
The purpose of XenPlatformLib is to regroup the few functions that are used in several places to detect if Xen is detected, and to get the XenInfo HOB. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689 Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190813113119.14804-14-anthony.perard@citrix.com>
2019-08-21OvmfPkg/XenPlatformPei: Grab RSDP from PVH guest start of day structAnthony PERARD
Check if there's a start of the day struct provided to PVH guest, save the ACPI RSDP address for later. This patch import import arch-x86/hvm/start_info.h from xen.git. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689 Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190813113119.14804-13-anthony.perard@citrix.com>
2019-08-21OvmfPkg/XenPlatformPei: Detect OVMF_INFO from hvmloaderAnthony PERARD
EFI_XEN_OVMF_INFO is only useful to retrieve the E820 table. The mXenHvmloaderInfo isn't used yet, but will be use in a further patch to retrieve the E820 table. Also remove the unused pointer from the XenInfo HOB as that information is only useful in the XenPlatformPei. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689 Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190813113119.14804-11-anthony.perard@citrix.com>
2019-04-30OvmfPkg: introduce OVMF_PK_KEK1_APP_PREFIX_GUIDLaszlo Ersek
For the EnrollDefaultKeys application, the hypervisor is expected to add a string entry to the "OEM Strings" (Type 11) SMBIOS table, with the following format: 4e32566d-8e9e-4f52-81d3-5bb9715f9727:<Base64 X509 cert for PK and first KEK> The string representation of the GUID at the front is the "application prefix", in terms of QEMU commit <https://git.qemu.org/?p=qemu.git;a=commit;h=2d6dcbf93fb0>. Introduce this GUID in the usual manner. Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Julien Grall <julien.grall@arm.com> Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Gary Lin <glin@suse.com>
2019-04-30OvmfPkg/EnrollDefaultKeys: extract MICROSOFT_VENDOR_GUIDLaszlo Ersek
The GUID 77FA9ABD-0359-4D32-BD60-28F4E78F784B is specified in MSDN, at <https://msdn.microsoft.com/en-us/ie/dn932805(v=vs.94)>, therefore it deserves an entry in the package DEC file, and a header file under "Include/Guid". (Arguably, this GUID declaration / definition could even live under SecurityPkg, but the edk2 tradition has been to hoist GUIDs, protocols/PPIs, and lib classes from OvmfPkg to a core package only when dependent C code is added to the core package.) Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Julien Grall <julien.grall@arm.com> Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Gary Lin <glin@suse.com>
2019-04-12OvmfPkg/IndustryStandard/Xen: replace MIT license text with SPDX IDLaszlo Ersek
The header files under "OvmfPkg/Include/IndustryStandard/Xen" include the MIT License text. Replace those license blocks with "SPDX-License-Identifier: MIT" (which refers to <https://spdx.org/licenses/MIT.html>) for easier parsing by machines (and humans). This follows the tree-wide adoption of "SPDX-License-Identifier"s, made for <https://bugzilla.tianocore.org/show_bug.cgi?id=1373>. Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Julien Grall <julien.grall@arm.com> Cc: Lars Kurth <lars.kurth@citrix.com> Cc: xen-devel@lists.xenproject.org Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1654 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
2019-04-11OvmfPkg: Copy Legacy8259 protocol definitions from IntelFrameworkPkgHao Wu
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496 This commit copies the exact Legacy8259 protocol header file from IntelFrameworkPkg to OvmfPkg. Also, the protocol GUID definition is duplicated in the OvmfPkg DEC file. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Ray Ni <ray.ni@intel.com> Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2019-04-09OvmfPkg: Replace BSD License with BSD+Patent LicenseMichael D Kinney
https://bugzilla.tianocore.org/show_bug.cgi?id=1373 Replace BSD 2-Clause License with BSD+Patent License. This change is based on the following emails: https://lists.01.org/pipermail/edk2-devel/2019-February/036260.html https://lists.01.org/pipermail/edk2-devel/2018-October/030385.html RFCs with detailed process for the license change: V3: https://lists.01.org/pipermail/edk2-devel/2019-March/038116.html V2: https://lists.01.org/pipermail/edk2-devel/2019-March/037669.html V1: https://lists.01.org/pipermail/edk2-devel/2019-March/037500.html Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2019-02-25OvmfPkg: add library to track boot option loading/starting on the consoleLaszlo Ersek
Introduce the Platform Boot Manager Print Status Code Library (for short, PlatformBmPrintScLib) class for catching and printing the LoadImage() / StartImage() preparations, and return statuses, that are reported by UefiBootManagerLib. In the primary library instance, catch only such status codes that UefiBootManagerLib reports from the same module that contains PlatformBmPrintScLib. The intent is to establish a reporting-printing channel within BdsDxe, between UefiBootManagerLib and PlatformBmPrintScLib. Ignore status codes originating elsewhence, e.g. from UiApp's copy of UefiBootManagerLib. Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Julien Grall <julien.grall@linaro.org> Cc: Ray Ni <ray.ni@intel.com> Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418 Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-11-20Revert "OvmfPkg: VMWare SVGA display device register definitions"yuchenlin
This reverts commit 9bcca53fe466cdff397578328d9d87d257aba493. We reverted VMWare SVGA driver. We don't need these definitions too. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: yuchenlin <yuchenlin@synology.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> (cherry picked from commit 328409ce8de7f318ee9c929b64302bd361cd1dbd) Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2018-11-12Reapply "OvmfPkg: VMWare SVGA display device register definitions"Laszlo Ersek
This reverts commit 328409ce8de7f318ee9c929b64302bd361cd1dbd, reapplying 9bcca53fe466cdff397578328d9d87d257aba493. Note that the commit now being reverted is technically correct; the only reason we're reverting it is because it should not have been pushed past the Soft Feature Freeze for the edk2-stable201811 tag. Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Julien Grall <julien.grall@linaro.org> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: yuchenlin <yuchenlin@synology.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1319 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: yuchenlin <yuchenlin@synology.com>
2018-11-06Revert "OvmfPkg: VMWare SVGA display device register definitions"yuchenlin
This reverts commit 9bcca53fe466cdff397578328d9d87d257aba493. We reverted VMWare SVGA driver. We don't need these definitions too. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: yuchenlin <yuchenlin@synology.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2018-06-14OvmfPkg: add QEMU_RAMFB_GUIDGerd Hoffmann
Add GUID header file for the QemuRamfbDxe driver. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
2018-05-24OvmfPkg/Virtio10Dxe: convert to PciCapLibLaszlo Ersek
Replace the manual capability list parsing in OvmfPkg/Virtio10Dxe with PciCapLib and PciCapPciIoLib API calls. The VIRTIO_PCI_CAP_LINK structure type is now superfluous. (Well, it always has been; we should have used EFI_PCI_CAPABILITY_HDR.) Also, EFI_PCI_CAPABILITY_VENDOR_HDR is now included at the front of VIRTIO_PCI_CAP. No driver other than Virtio10Dxe relies on VIRTIO_PCI_CAP. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-05-24OvmfPkg: introduce PciCapPciIoLibLaszlo Ersek
Add a library class, and a UEFI_DRIVER lib instance, that are layered on top of PciCapLib, and allow clients to plug an EFI_PCI_IO_PROTOCOL backend into PciCapLib, for config space access. (Side note: Although the UEFI spec says that EFI_PCI_IO_PROTOCOL_CONFIG() returns EFI_UNSUPPORTED if "[t]he address range specified by Offset, Width, and Count is not valid for the PCI configuration header of the PCI controller", this patch doesn't directly document the EFI_UNSUPPORTED error code, for ProtoDevTransferConfig() and its callers ProtoDevReadConfig() and ProtoDevWriteConfig(). Instead, the patch refers to "unspecified error codes". The reason is that in edk2, the PciIoConfigRead() and PciIoConfigWrite() functions [1] can also return EFI_INVALID_PARAMETER for the above situation. Namely, PciIoConfigRead() and PciIoConfigWrite() first call PciIoVerifyConfigAccess(), which indeed produces the standard EFI_UNSUPPORTED error code, if the device's config space is exceeded. However, if PciIoVerifyConfigAccess() passes, and we reach RootBridgeIoPciRead() and RootBridgeIoPciWrite() [2], then RootBridgeIoCheckParameter() can still fail, e.g. if the root bridge doesn't support extended config space (see commit 014b472053ae3). For all kinds of Limit violations in IO, MMIO, and config space, RootBridgeIoCheckParameter() returns EFI_INVALID_PARAMETER, not EFI_UNSUPPORTED. That error code is then propagated up to, and out of, PciIoConfigRead() and PciIoConfigWrite(). [1] MdeModulePkg/Bus/Pci/PciBusDxe/PciIo.c [2] MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c ) Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-05-24OvmfPkg: introduce PciCapPciSegmentLibLaszlo Ersek
Add a library class, and a BASE lib instance, that are layered on top of PciCapLib, and allow clients to plug a PciSegmentLib backend into PciCapLib, for config space access. (Side note: The "MaxDomain" parameter is provided because, in practice, platforms exist where a PCI Express device may show up on a root bridge such that the root bridge doesn't support access to extended config space. Earlier the same issue was handled for MdeModulePkg/PciHostBridgeDxe in commit 014b472053ae3. However, that solution does not apply to the PciSegmentLib class, because: (1) The config space accessor functions of the PciSegmentLib class, such as PciSegmentReadBuffer(), have no way of informing the caller whether access to extended config space actually succeeds. (For example, in the UefiPciSegmentLibPciRootBridgeIo instace, which could in theory benefit from commit 014b472053ae3, the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() status code is explicitly ignored, because there's no way for the lib instance to propagate it to the PciSegmentLib caller. If the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() call fails, then DxePciSegmentLibPciRootBridgeIoReadWorker() returns Data with indeterminate value.) (2) There is no *general* way for any firmware platform to provide, or use, a PciSegmentLib instance in which access to extended config space always succeeds. In brief, on a platform where config space may be limited to 256 bytes, access to extended config space through PciSegmentLib may invoke undefined behavior; therefore PciCapPciSegmentLib must give platforms a way to prevent such access.) Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-05-24OvmfPkg: introduce PciCapLibLaszlo Ersek
Add a library class, and a BASE lib instance, to work more easily with PCI capabilities in PCI config space. Functions are provided to parse capabilities lists, and to locate, describe, read and write capabilities. PCI config space access is abstracted away. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Suggested-by: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-05-22OvmfPkg/IndustryStandard: add QemuTpm.h headerMarc-André Lureau
Add some common macros and type definitions corresponding to the QEMU TPM interface. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Laszlo Ersek <lersek@redhat.com>
2018-04-10OvmfPkg: remove BLOCK_MMIO_PROTOCOL and BlockMmioToBlockIoDxeLaszlo Ersek
BLOCK_MMIO_PROTOCOL and BlockMmioToBlockIoDxe were introduced to OvmfPkg in March 2010, in adjacent commits b0f5144676fa and efd82c5794ec. In the past eight years, no driver or application seems to have materialized that produced BLOCK_MMIO_PROTOCOL instances. Meanwhile the UEFI spec has developed the EFI_RAM_DISK_PROTOCOL, which edk2 implements (and OVMF includes) as RamDiskDxe. Rather than fixing issues in the unused BlockMmioToBlockIoDxe driver, remove the driver, together with the BLOCK_MMIO_PROTOCOL definition that now becomes unused too. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Steven Shi <steven.shi@intel.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=926 Reported-by: Steven Shi <steven.shi@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2018-03-14OvmfPkg/QemuBootOrderLib: add ConnectDevicesFromQemu()Laszlo Ersek
QemuBootOrderLib expects PlatformBootManagerLib to call the following triplet: (1) EfiBootManagerConnectAll(), (2) EfiBootManagerRefreshAllBootOption(), (3) SetBootOrderFromQemu(). This leads to bad performance, when many devices exist such that the firmware can drive them, but they aren't marked for booting in the "bootorder" fw_cfg file. Namely, (1) EfiBootManagerConnectAll() talks to all hardware, which takes long. Plus some DriverBindingStart() functions write NV variables, which is also slow. (For example, the IP config policy for each NIC is stored in an NV var that is named after the MAC). (2) EfiBootManagerRefreshAllBootOption() generates boot options from the protocol instances produced by (1). Writing boot options is slow. (3) Under the above circumstances, SetBootOrderFromQemu() removes most of the boot options produced by (2). Erasing boot options is slow. Introduce ConnectDevicesFromQemu() as a replacement for (1): only connect devices that the QEMU user actually wants to boot off of. (There's a slight loss of compatibility when a platform switches from EfiBootManagerConnectAll() to ConnectDevicesFromQemu(). EfiBootManagerConnectAll() may produce UEFI device paths that are unknown to QemuBootOrderLib (that is, for neither PCI- nor virtio-mmio-based devices). The BootOrderComplete() function lets such unmatched boot options survive at the end of the boot order. With ConnectDevicesFromQemu(), these options will not be auto-generated in the first place. They may still be produced by other means. SetBootOrderFromQemu() is not modified in any way; reordering+filtering boot options remains a separate task.) Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Shannon Zhao <zhaoshenglong@huawei.com> Cc: Xiang Zheng <xiang.zheng@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ArmVirtQemu Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Xiang Zheng <xiang.zheng@linaro.org>
2018-03-14OvmfPkg/QemuBootOrderLib: add missing EFIAPI specifiersLaszlo Ersek
Public library APIs should be declared as EFIAPI. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Shannon Zhao <zhaoshenglong@huawei.com> Cc: Xiang Zheng <xiang.zheng@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ArmVirtQemu Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Xiang Zheng <xiang.zheng@linaro.org>
2018-03-06OvmfPkg/MemEncryptSevLib: find pages of initial SMRAM save state mapLaszlo Ersek
In the next three patches, we're going to modify three modules under OvmfPkg. When OVMF is built with -D SMM_REQUIRE and runs in an SEV guest, each affected module will have to know the page range that covers the initial (pre-SMBASE relocation) SMRAM save state map. Add a helper function to MemEncryptSevLib that calculates the "base address" and "number of pages" constants for this page range. (In a RELEASE build -- i.e., with assertions disabled and optimization enabled --, the helper function can be compiled to store two constants determined at compile time.) Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Brijesh Singh <brijesh.singh@amd.com> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
2018-03-06OvmfPkg/MemEncryptSevLib: clean up MemEncryptSevSetPageEncMask() declLaszlo Ersek
The declaration and the definition(s) of the function should have identical leading comments and/or identical parameter lists. Replace any leftover "clear" references to the C-bit with "set" references. Also remove any excess space in the comment block, and unindent the trailing "**/" if necessary. Correct several parameter references. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Brijesh Singh <brijesh.singh@amd.com> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
2018-03-06OvmfPkg/MemEncryptSevLib: clean up MemEncryptSevClearPageEncMask() declLaszlo Ersek
The declaration and the definition(s) of the function should have identical leading comments and/or identical parameter lists. Also remove any excess space in the comment block, and unindent the trailing "**/" if necessary. Correct several parameter references. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Brijesh Singh <brijesh.singh@amd.com> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
2018-03-06OvmfPkg/MemEncryptSevLib: clean up MemEncryptSevIsEnabled() declLaszlo Ersek
The declaration and the definition(s) of the function should have identical leading comments and/or identical parameter lists. Also remove any excess space in the comment block, and unindent the trailing "**/" if necessary. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Brijesh Singh <brijesh.singh@amd.com> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
2018-03-06OvmfPkg/MemEncryptSevLib: rewrap to 79 characters widthLaszlo Ersek
There are many overlong lines; it's hard to work with the library like this. Rewrap all files to 79 columns. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Brijesh Singh <brijesh.singh@amd.com> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
2017-10-03OvmfPkg/IndustryStandard: define PCI Capabilities for QEMU's PCI BridgesLaszlo Ersek
QEMU has recently gained the ability to provide various hints about its PCI bridges. The hints take the form of vendor-specific PCI capabilities. Define macros and types under "OvmfPkg/Include/IndustryStandard" to describe these capabilities. The definitions correspond to "docs/pcie_pci_bridge.txt" in the QEMU tree. Said documentation was added in the last commit of the following series: a35fe226558a hw/pci: introduce pcie-pci-bridge device 70e1ee59bb94 hw/pci: introduce bridge-only vendor-specific capability to provide some hints to firmware 226263fb5cda hw/pci: add QEMU-specific PCI capability to the Generic PCI Express Root Port c1800a162765 docs: update documentation considering PCIE-PCI bridge We are going to parse the Resource Reservation Capability in OvmfPkg/PciHotPlugInitDxe, and return the reservation requests to PciBusDxe. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2017-09-20OvmfPkg/CsmSupportLib: move PAM register addresses to IndustryStandardLaszlo Ersek
* Introduce the PIIX4_PAM* and MCH_PAM* macros under "OvmfPkg/Include/IndustryStandard". These macros capture the PAM register offsets (in PCI config space) on the respective Memory Controller B/D/F, from the respective data sheets. * Under IndustryStandard, introduce the PMC_REGISTER_PIIX4() macro for PIIX4. (For Q35, we already have DRAMC_REGISTER_Q35().) In both cases, the B/D/F is 0/0/0. * Under CsmSupportLib, replace the "PAMRegOffset" field (UINT8) in the PAM_REGISTER_VALUE structure with "PAMRegPciLibAddress" (UINTN). The new field contains the return value of the PCI_LIB_ADDRESS() macro. * Under CsmSupportLib, replace the "mRegisterValues440" elements as follows: REG_PAMx_OFFSET_440, ReadEnableData, WriteEnableData --> PMC_REGISTER_PIIX4 (PIIX4_PAMx), ReadEnableData, WriteEnableData * Under CsmSupportLib, replace the "mRegisterValuesQ35" elements as follows: REG_PAMx_OFFSET_Q35, ReadEnableData, WriteEnableData --> DRAMC_REGISTER_Q35 (MCH_PAMx), ReadEnableData, WriteEnableData * Under CsmSupportLib, update the register address calculations as follows (for all of PciOr8(), PciAnd8() and PciRead8()): PCI_LIB_ADDRESS ( PAM_PCI_BUS, PAM_PCI_DEV, PAM_PCI_FUNC, mRegisterValues[Index].PAMRegOffset ) --> mRegisterValues[Index].PAMRegPciLibAddress * Under CsmSupportLib, remove the PAM_PCI_* and REG_PAM*_OFFSET_* macros. Technically speaking, these changes could be split into three patches (IndustryStandard macro additions, CsmSupportLib code updates, CsmSupportLib macro removals). However, the patch is not big, and in this case it is actually helpful to present the code movement / refactoring in one step, for easier verification. Cc: Aleksei Kovura <alex3kov@zoho.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Ref: https://bugs.launchpad.net/qemu/+bug/1715700 Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Aleksei Kovura <alex3kov@zoho.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2017-08-25OvmfPkg/Virtio10: define VIRTIO_F_IOMMU_PLATFORM feature bitBrijesh Singh
This feature indicates that the device is behind an IOMMU that translates bus addresses from the device into physical addresses in memory. If this feature bit is set to 0, then the device emits physical addresses which are not translated further, even though an IOMMU may be present. see [1] for more infromation [1] https://lists.oasis-open.org/archives/virtio-dev/201610/msg00121.html Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-25OvmfPkg/VirtioLib: change the parameter of VirtioAppendDesc() to UINT64Brijesh Singh
The patch change the "BufferPhysAddr" parameter of VirtioAppendDesc() from type UINTN to UINT64. UINTN is appropriate as long as we pass system memory references. After the introduction of bus master device addresses, that's no longer the case in general. Should we implement "real" IOMMU support at some point, UINTN could break in 32-bit builds of OVMF. Suggested-by: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: clarify commit message] [lersek@redhat.com: balance parens in VirtioAppendDesc() comment blocks] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-25OvmfPkg/VirtioLib: alloc VRING buffer with AllocateSharedPages()Brijesh Singh
The VRING buffer is a communication area between guest and hypervisor. Allocate it using VIRTIO_DEVICE_PROTOCOL.AllocateSharedPages() so that it can be mapped later with VirtioRingMap() for bi-directional access. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: correct typo in VirtioRingInit() comment blocks] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-25OvmfPkg/VirtioLib: add function to map VRINGBrijesh Singh
Add a function to map the ring buffer with BusMasterCommonBuffer so that ring can be accessed by both guest and hypervisor. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: fix typo in commit message] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-25OvmfPkg/Virtio: take RingBaseShift in SetQueueAddress()Brijesh Singh
For the case when an IOMMU is used for translating system physical addresses to DMA bus master addresses, the transport-independent virtio device drivers will be required to map their VRING areas to bus addresses with VIRTIO_DEVICE_PROTOCOL.MapSharedBuffer() calls. - MMIO and legacy virtio transport do not support IOMMU to translate the addresses hence RingBaseShift will always be set to zero. - modern virtio transport supports IOMMU to translate the address, in next patch we will update the Virtio10Dxe to use RingBaseShift offset. Suggested-by: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: remove commit msg paragraph with VirtioLib reference] [lersek@redhat.com: fix typo in VIRTIO_SET_QUEUE_ADDRESS comment block] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-25OvmfPkg/VirtioLib: take VirtIo instance in VirtioRingInit/VirtioRingUninitBrijesh Singh
Passing the VirtIo protocol instance will allow the vring to use VIRTIO_DEVICE_PROTOCOL.AllocateSharedPages () to allocate vring buffer. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-25OvmfPkg/VirtioLib: add VirtioMapAllBytesInSharedBuffer() helper functionBrijesh Singh
The function can be used for mapping the system physical address to virtio device address using VIRTIO_DEVICE_PROTOCOL.MapSharedBuffer (). The function helps with centralizing error handling, and it allows the caller to pass in constant or other evaluated expressions for NumberOfBytes. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: s/This/VirtIo/ in the new function's comment blocks] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-25OvmfPkg: introduce IOMMU-like member functions to VIRTIO_DEVICE_PROTOCOLBrijesh Singh
The patch extends VIRTIO_DEVICE_PROTOCOL to provide the following new member functions: - AllocateSharedPages : allocate a memory region suitable for sharing between guest and hypervisor (e.g ring buffer). - FreeSharedPages: free the memory allocated using AllocateSharedPages (). - MapSharedBuffer: map a host address to device address suitable to share with device for bus master operations. - UnmapSharedBuffer: unmap the device address obtained through the MapSharedBuffer(). We're free to extend the protocol structure without changing the protocol GUID, or bumping any protocol version fields (of which we currently have none), because VIRTIO_DEVICE_PROTOCOL is internal to edk2 by design -- see the disclaimers in "VirtioDevice.h". The patch implements Laszlo's recommendation [1]. [1] http://mid.mail-archive.com/841bec5f-6f6e-8b1f-25ba-0fd37a915b72@redhat.com Suggested-by: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2017-08-15OvmfPkg/Protocol/VirtioDevice: fix comment styleBrijesh Singh
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [lersek@redhat.com: clarify subject line] [lersek@redhat.com: adjust the set of comments updated by the patch] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
2017-07-10OvmfPkg/BaseMemcryptSevLib: Add SEV helper libraryBrijesh Singh
Add Secure Encrypted Virtualization (SEV) helper library. The library provides the routines to: - set or clear memory encryption bit for a given memory region. - query whether SEV is enabled. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Jordan Justen <jordan.l.justen@intel.com>
2017-07-05OvmfPkg/IndustryStandard/Q35MchIch9.h: add extended TSEG size macrosLaszlo Ersek
Add the macros for interfacing with the QEMU feature added in QEMU commit 2f295167e0c4 ("q35/mch: implement extended TSEG sizes", 2017-06-08). Cc: Jordan Justen <jordan.l.justen@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2017-04-07OvmfPkg: VMWare SVGA display device register definitionsPhil Dennis-Jordan
This adds a header file defining symbolic constants for the VMWare SVGA virtual display device in preparation for supporting it in QemuVideoDxe. It is mostly an extract of the file lib/vmware/svga_reg.h from commit 329dd537456f93a806841ec8a8213aed11395def of VMWare's vmware-svga repository at git://git.code.sf.net/p/vmware-svga/git (See also http://vmware-svga.sourceforge.net/ ) Only the bare essentials necessary for initialisation, modesetting and framebuffer access have been kept from the original file; macro names have been prefixed with VMWARE_SVGA_ instead of SVGA2_, and the enum definition has been adapted to comply with EDK2 naming conventions. The original file was released by VMWare under the MIT license, this has been retained. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2017-03-15OvmfPkg/QemuFwCfgS3Lib: Fix VS tool chain build failureDandan Bi
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2017-03-14OvmfPkg/QemuFwCfgS3Lib: add boot script opcode generation APIs to libclassLaszlo Ersek
Introduce the following APIs: - QemuFwCfgS3CallWhenBootScriptReady(): central function that registers a callback function, with a context parameter, for when ACPI S3 Boot Script opcodes can be produced. This function also allocates reserved memory for the opcodes to operate upon. The client module is supposed to produce the boot script fragment in the callback function. - QemuFwCfgS3ScriptWriteBytes(), QemuFwCfgS3ScriptReadBytes(), QemuFwCfgS3ScriptSkipBytes(), QemuFwCfgS3ScriptCheckValue(): helper functions, available only to the above callback function, for composing the boot script fragment. QemuFwCfgS3ScriptSkipBytes() can double as a plain "select" whenever necessary. Cc: Jordan Justen <jordan.l.justen@intel.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-21 05:58:16 +0000