tests: remove redundant build tests

i2c_quark_se_ss and dw_aio_comparator are just build tests that
enable Kconfig options and do not do anything. We have real samples
for those drivers now.

Change-Id: Ia8c0a1801b967205cc1c116a0887b46a7dc5bbbe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>

7 files changed, 0 insertions, 44 deletions

diff --git a/samples/drivers/dw_aio_comparator/Makefile b/samples/drivers/dw_aio_comparator/Makefile
deleted file mode 100644
index 11b194cfd..000000000
--- a/samples/drivers/dw_aio_comparator/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-KERNEL_TYPE = nano
-BOARD ?= quark_se_devboard
-SOURCE_DIR = $(ZEPHYR_BASE)/samples/synchronization/nanokernel/src/
-CONF_FILE = prj.conf
-
-include ${ZEPHYR_BASE}/Makefile.inc
diff --git a/samples/drivers/dw_aio_comparator/README.txt b/samples/drivers/dw_aio_comparator/README.txt
deleted file mode 100644
index 21a6fe464..000000000
--- a/samples/drivers/dw_aio_comparator/README.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-This test is used to test the DesignWare AIO/Comparator. The voltage input
-pin is analog in A0 on circuit board, which maps to AIN[10] on chip.
-
-To test:
-1. Connect the A0 pin to ground via a resistor (to limit current).
-   Any larger then 1k Ohm would be fine.
-2. Turn on the device.
-3. Wait for device to boot, until "app started" line appeared.
-4. Remove resistor between A0 pin and ground.
-   The line "*** A0, AIN[10] triggered rising." should appear.
-5. Reconnect the resistor.
-   The line "*** A0, AIN[10] triggered falling." should appear.
-6. Keep removing/inserting the resistor to your heart's content.
diff --git a/samples/drivers/dw_aio_comparator/prj.conf b/samples/drivers/dw_aio_comparator/prj.conf
deleted file mode 100644
index ce4e831eb..000000000
--- a/samples/drivers/dw_aio_comparator/prj.conf
+++ /dev/null
@@ -1,3 +0,0 @@
-# Use standard security profile. (=> no need for a random number generator)
-CONFIG_AIO_COMPARATOR=y
-CONFIG_AIO_DW_COMPARATOR=y
diff --git a/samples/drivers/dw_aio_comparator/testcase.ini b/samples/drivers/dw_aio_comparator/testcase.ini
deleted file mode 100644
index 6510dd26f..000000000
--- a/samples/drivers/dw_aio_comparator/testcase.ini
+++ /dev/null
@@ -1,6 +0,0 @@
-[test]
-build_only = true
-tags = drivers
-
-arch_whitelist = x86
-platform_whitelist = quark_se
diff --git a/samples/drivers/i2c_quark_se_ss/Makefile b/samples/drivers/i2c_quark_se_ss/Makefile
deleted file mode 100644
index 2e97f8260..000000000
--- a/samples/drivers/i2c_quark_se_ss/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-KERNEL_TYPE = nano
-BOARD ?= arduino_101_sss
-SOURCE_DIR = $(ZEPHYR_BASE)/samples/synchronization/nanokernel/src/
-CONF_FILE = prj.conf
-
-include ${ZEPHYR_BASE}/Makefile.inc
diff --git a/samples/drivers/i2c_quark_se_ss/prj.conf b/samples/drivers/i2c_quark_se_ss/prj.conf
deleted file mode 100644
index af0dfd778..000000000
--- a/samples/drivers/i2c_quark_se_ss/prj.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-# Use standard security profile. (=> no need for a random number generator)
-CONFIG_I2C=y
-CONFIG_I2C_QUARK_SE_SS=y
-CONFIG_I2C_QUARK_SE_SS_0=y
diff --git a/samples/drivers/i2c_quark_se_ss/testcase.ini b/samples/drivers/i2c_quark_se_ss/testcase.ini
deleted file mode 100644
index 095f9e3dd..000000000
--- a/samples/drivers/i2c_quark_se_ss/testcase.ini
+++ /dev/null
@@ -1,6 +0,0 @@
-[test]
-build_only = true
-tags = drivers
-
-arch_whitelist = arc
-platform_whitelist = arduino_101_sss