| Age | Commit message (Collapse) | Author |
|---|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1521
This is to add CET related instruction in Nasm
because CET instruction is not supported yet.
See https://www.nasm.us/xdoc/2.14.02/html/nasmdocb.html
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
parsing the message.
Fix CVE-2018-12178
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=809
The DNS driver only checks the received packet size against the
minimum DNS header size in DnsOnPacketReceived(), later it accesses
the QueryName and QuerySection beyond the header scope, which might
cause the pointer within DNS driver points to an invalid entry or
modifies the memory content beyond the header scope.
This patch is to fix above problem.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1134
Originally, the block size of created Ram disks is hard-coded to 512
bytes. However, if the total size of the Ram disk is not a multiple of 512
bytes, there will be potential memory access issues when dealing with the
last block of the Ram disk.
This commit will adjust the block size of the Ram disks to ensure that the
total size is a multiple of the block size.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1134
The commit adds checks for detecting GPT and MBR partitions.
These checks will ensure that the device block size is big enough to hold
an MBR (512 bytes).
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
|
|
When python3 reads an XML file it will parse the file in error
if the file has a BOM
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
|
|
This reverts commit bde673b2dcd1b087af7f49dd5f0c3b82b02172a5.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
This reverts commit 1d49a75367ef6827b8b8f77f61e9ce245d1bdee3.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
This reverts commit c788bdaba47536447ae37518a96d92e0da54aad7.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
This reverts commit 6814256083a90ef218e7ae240e51922045175df1.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
This reverts commit d3a15f435f9716aa2f2ea5e9b35fcda04f267ab4.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
This reverts commit 07f4e26eb6fe5203028ecfe9bad90d3b67dc72c8.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
According to ARM Generic Interrupt Controller Architecture
Specification, GIC architecture version 3.0 and version 4.0,
GICD_IROUTER<n> is a 64-bit register.
Fixed code to use 64 bit MMIO write operations so that the
Aff3 value (bits [39:32]) is written to GICD_IROUTER<n>.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reported-by: Carl van Schaik <carl@cog.systems>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
LibGetTime():
- Two variables were used for the epoch, where only one should have been [*].
- Also harmonize variable name to match the one used in LibSetTime.
LibSetTime():
- Address possible underflows if time is set to start of epoch.
- Ensure that time being read does actually match time that was manually
set (plus the time elapsed since), by subtracting number of seconds
since reset.
[*] This fixes a build breakage, since one of these variables was set but
never used, triggering a compiler diagnostic at some optimization levels.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Steps:
1. Download edk2 tree
2. Build BaseTools
3. Go to edk2\BaseTools\Scripts\PackageDocumentTools
to run packagedoc_cli.py
An error occurs if relative imports are used when running
a file alone
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
|
|
FirmwareVolume.UnDispatchedFfsDict is mutated during iteration,
convert the FirmwareVolume.UnDispatchedFfsDict.keys() to a new list
to resolve this problem.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
The Eot will report error when python3 enabled.
We replaced sdict with collections.OrderedDict in python3
patch set, but the sdict implement "append" method which is not
implemented in collections.OrderedDict.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Minor updates to comments and typo fixes. Also removed
unused structure CM_ARM_CPU_INFO_LIST.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
According to ACPI 6.2 Specification - Errata A, 'One,
and only one, GIC distributor structure must be present
in the MADT for an ARM based system'. Therefore,
the GIC Distributor ID field in the ACPI MADT GICD
substructure can be set to zero and there is no need
for the Configuration Manager to provide this information.
Update the CM_ARM_GICD_INFO structure to remove the GicId
field. Similarly update the MADT Generator to set the GicId
field in the GICD substructure to zero.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
The DBG2_DEBUG_PORT_DDI() macro supports adding only one
Generic Base Address Register. Therefore, removed the
superfluous parameter NumReg and updated the macro to
use DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS which has
a value 1.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
Added option for OEMs to provide OEM Table ID and
OEM Revision for ACPI tables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
Renamed the enum EArmObjIdMapping to EArmObjIdMappingArray
and updated the IORT generator accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
Updated the Protocols section to reflect the protocols
that are produced or consumed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
Add support for 16550 UART to ACPI SPCR table as it is a
supported UART type by HLOS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
DynamicTableManagerDxe initialization fails if
gEdkiiDynamicTableFactoryProtocolGuid,
gEdkiiConfigurationManagerProtocolGuid and
gEfiAcpiTableProtocolGuid are not already available.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
Consume PlatformBmPrintScLib, added earlier in this series. When
BdsDxe+UefiBootManagerLib report LoadImage() / StartImage() preparations
and return statuses, print the reports to the UEFI console. This allows
end-users better visibility into the boot process.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
The EFI_RETURN_STATUS_EXTENDED_DATA feature from PI-1.7
(<https://mantis.uefi.org/mantis/view.php?id=1885>) enables platform code
to learn about boot option failures (loading and launching) via status
codes reported by the UEFI Boot Manager.
In commit 59541d41633c, we removed all status code support from
ArmVirtPkg. Reenable that support now, minimally, just to the extent so we
can benefit from the PI-1.7 feature mentioned above:
(1) Include the ReportStatusCodeRouterRuntimeDxe driver.
This driver produces two protocols, EFI_STATUS_CODE_PROTOCOL and
EFI_RSC_HANDLER_PROTOCOL. The former allows DXE phase modules and
runtime modules to report (produce) status codes. The latter allows
the same types of modules to register callbacks for status code
handling (consumption).
(Handler registration occurs only at boot time. Status codes are
delivered to each handler at runtime as well, unless the handler is
unregistered at ExitBootServices().)
(2) Resolve ReportStatusCodeLib to a non-Null instance, for DXE_DRIVER
modules only. This way DXE_DRIVER modules that use the
REPORT_STATUS_CODE_EX() macro and friends will reach
EFI_STATUS_CODE_PROTOCOL from point (1).
(3) Set PcdReportStatusCodePropertyMask to 3 (the default value is 0).
This causes the REPORT_STATUS_CODE_EX() macro and friends to let
Progress Codes (bit#0) and Error Codes (bit#1) through to point (1).
Debug Codes (bit#2) are filtered out.
(4) Include no driver, for now, that registers any status code handler via
EFI_RSC_HANDLER_PROTOCOL, from point (1). Status codes that reach
ReportStatusCodeRouterRuntimeDxe will be thrown away.
(5) Modify only the ArmVirtQemu* platforms. A status code handler will
be added to "ArmVirtPkg/Library/PlatformBootManagerLib" in the next patch,
and this library instance is not consumed by ArmVirtXen.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Consume PlatformBmPrintScLib, added earlier in this series. When
BdsDxe+UefiBootManagerLib report LoadImage() / StartImage() preparations
and return statuses, print the reports to the UEFI console. This allows
end-users better visibility into the boot process.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Introduce the Platform Boot Manager Print Status Code Library (for short,
PlatformBmPrintScLib) class for catching and printing the LoadImage() /
StartImage() preparations, and return statuses, that are reported by
UefiBootManagerLib.
In the primary library instance, catch only such status codes that
UefiBootManagerLib reports from the same module that contains
PlatformBmPrintScLib. The intent is to establish a reporting-printing
channel within BdsDxe, between UefiBootManagerLib and
PlatformBmPrintScLib. Ignore status codes originating elsewhence, e.g.
from UiApp's copy of UefiBootManagerLib.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
In the EFI_RETURN_STATUS_EXTENDED_DATA structure from PI-1.7, there may be
padding between the DataHeader and ReturnStatus members. The
REPORT_STATUS_CODE_EX() macro starts populating the structure immediately
after DataHeader, therefore the source data must provide for the padding.
Extract the BmReportLoadFailure() function from EfiBootManagerBoot(),
prepare a zero padding (if any) in a temporary
EFI_RETURN_STATUS_EXTENDED_DATA object, and fix the
REPORT_STATUS_CODE_EX() macro invocation.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Star Zeng <star.zeng@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1539
Fixes: c2cf8720a5aad74230767a1f11bade2d86de3745
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1474
Within UfsBlockIoPei, the current implementation of the Block IO(2)
services:
UfsBlockIoPeimGetMediaInfo
UfsBlockIoPeimReadBlocks
UfsBlockIoPeimGetMediaInfo2
UfsBlockIoPeimReadBlocks2
does not handle the input parameter 'DeviceIndex' properly.
According to both of the PI spec and the function description comments:
> DeviceIndex Specifies the block device to which the function wants
> to talk. ... This index is a number from one to
> NumberBlockDevices.
But current codes incorrectly treat the valid range of 'DeviceIndex' as 0
to (NumberBlockDevices - 1).
This commit is to address this issue.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1536
To avoid the confusion caused by function name,
rename EfiBootManagerGetNextFullDevicePath to
EfiBootManagerGetNextLoadOptionDevicePath.
As an API function should add EFIAPI prefix for this function.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020
The same issue has fixed in UefiCpuPkg/Microcode.c file.
Please reference b6f67b4d58b81f12f63f5f8c94cf8af3600297ab
to get more detail information.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
If the input parameter AsciiString length is greater
than 255, the GenFv will hang.
This patch is to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
If the WORKSPACE environment variable has been set,The variables that
control stable sorting will not be set.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
|
|
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1535
If there is Hii Structure Pcd, build will fail, root cause is that
there is an incorrect variable access method used in code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
When define [DEPEX] in lib inf to build, it will fail and report"
gUefiOvmfPkgTokenSpaceGuid.test1 used in [Depex] section should be
used as FixedAtBuild type and VOID* datum type in the module."
But we define this PCD to FixedAtBuild type and VOID* datum type indeed.
DEC:
[PcdsFixedAtBuild]
gUefiOvmfPkgTokenSpaceGuid.test1 |
{GUID("4096267b-da0a-42eb-b5eb-fef31d207cb4")}|VOID*|0x3c
DSC:
add pcd under lib inf as below:
NULL|TestPkg/TestLib/TestLib.inf
<PcdsFixedAtBuild>
gUefiOvmfPkgTokenSpaceGuid.test1 | {GUID(gUefiOvmfPkgTokenSpaceGuid)}
Lib inf:(TestPkg/TestLib/TestLib.inf)
[Depex]
gUefiOvmfPkgTokenSpaceGuid.test1
[FixedPcd]
gUefiOvmfPkgTokenSpaceGuid.test1
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
|
|
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1540
This issue in introduced by commit
d943b0c339fe3d35ffdf9f580ccb7a55915c6854
To convert bytes to string, we need to use bytes.decode()
instead of using str(bytes).
If the source file is not a txt file, ignore that file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1544
1) The GenC tool does not include the constructor/destructor for
USER_DEFINED module. It should be included.
Only constructor/destructor with BASE type is included here.
The constructor/destructor with PEI/DXE/SMM type is still excluded
to keep original behavior.
2) The GenC tool includes the UnloadImage code for BASE module.
It should NOT be included.
3) The GenC tool uses EFI_STATUS and ASSERT_EFI_ERROR for BASE type.
It should use RETURN_STATUS and ASSERT_RETURN_ERROR.
4) The GenC tool miss DebugLib.h for BASE or USER_DEFINED module
AutoGen.c. Only Base.h is there. It should add Library/DebugLib.h.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
|
|
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1461
Add the runtime library instance of ResetSystemLib in
MdeModulePkg.dsc to make sure it can build pass.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1461
Implement a runtime library instance of ResetSystemLib. It would
use a internal point instead of gRT and convert it depend on
gEfiEventVirtualAddressChangeGuid.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem for PEI ResetSystemLib to be in accord with
DXE instance.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem for BaseResetSystemLibNull to be
in accord with other instances.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem for DXE ResetSystemLib. So the consumer of
ResetSystemLib can use this API to reset system with additional reset
data.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add the new API ResetSystem in the related head file so that
the consumer can use it through the combination of library
instance and head file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Change the function name form ResetSystem to RuntimeServiceResetSystem.
Because ResetSystem and EfiResetSystem would be used in ResetSystemLib
and RuntimeLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1528
Shell delay option without parameters do not check the
index of shell parameter argv. Add index check to avoid
invalid pointer references.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1529
This commit will add the 'Security feature set' support for ATA devices.
According to the AT Attachment 8 - ATA/ATAPI Command Set (ATA8-ACS)
specification, the Security feature set is an optional feature. In
summary, the feature is a password system that restricts access to user
data stored on an ATA device. A more detailed introduction of this feature
can be referred from the ATA8-ACS spec.
The HddPassword driver is composed of 2 parts:
* A DXE driver and
* A PEI driver
The DXE driver consumes EFI_ATA_PASS_THRU_PROTOCOL instances and installs
an HII GUI to manage the devices. If the managing device supports Security
feature set, the HII page will provide the user with the ability to
set/update/disable the password for this device. Also, if a password is
being set via the Security feature set, a popup window will show during
boot requesting the user to input password.
Another feature supported by this driver is that for those managing
devices with password set, they will be automatically unlocked during the
S3 resume. This is done by the co-work of the DXE driver and the PEI
driver:
The DXE driver will save the password and the identification information
for these devices into a LockBox, which is only allowed to restore during
S3 resume.
The PEI driver, during S3 resume, will restore the content in the LockBox
and will consume EDKII_PEI_ATA_PASS_THRU_PPI instances to unlock devices.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
For the current implementation of OpalPassword drivers, it has a feature
to support devices being automatically unlocked in the S3 resume. For this
feature, two types of devices are supported:
* ATA hard disks working under AHCI mode
* NVM Express devices
The support of this feature requires the above 2 types of device to be
initialized at the PEI phase during S3 resume, which is done by the
co-work of the OpalPasswordDxe driver and the OpalPasswordPei driver.
More specifically, the OpalPasswordDxe will handle:
* Pre-allocate MMIO resource and save it in a driver internal LockBox for
OpalPasswordPei to retrieve;
* Save the PCI configuration space of ATA controllers into boot script.
Meanwhile, the OpalPasswordPei will handle:
* Rely on the boot script for the PCI configuration space program of ATA
controllers;
* Restore the driver internal LockBox to get the MMIO resource;
* Complete the PCI configuration space program for ATA and NVME
controllers;
* Initialize ATA and NVME controllers and devices.
This commit will remove these hardware initialization related codes from
the OpalPassword drivers. The hardware initialization will be covered by
PEI storage device drivers (e.g. NvmExpressPei & AhciPei in the
MdeModulePkg).
After such codes removal, the OpalPasswordDxe will only handle:
* Construct/update the S3StorageDeviceInitList LockBox with the managing
ATA and NVME devices.
And the OpalPasswordPei will only handle:
* Locate Storage Security Command PPI instances to perform the device
automatic unlock during the S3 resume.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
The previous commit:
MdeModulePkg/SmmLockBoxLib: Support LockBox enlarge in UpdateLockBox()
adds the support to enlarge a LockBox when using the LockBoxLib API
UpdateLockBox().
This commit is to sync the API description comment of UpdateLockBox() with
its counterparts in MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
