| Age | Commit message (Collapse) | Author |
|---|
|
In order to replace command line parameter pcie_aspm=off, BIOS needs to
disable Pcie Aspm support during Pcie initilization.
D03 and D05 do not support PCIe ASPM, so we disable it in BIOS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yan Zhang <zhangyan81@huawei.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
modify processorFamily of type 4 to ProcessorFamilyIndicatorFamily2,
indicator to obtain the processor family from the Processor Family 2 field.
ProcessorFamily2 is already specified as ProcessorFamilyARM in the existing
table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Unify all D0x(include D06 in further) to cache coherent DmaLib.
This can improve boot speed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Yue <wangyue41@huawei.com>
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
1. This driver install a protocol for SnpPV600Dxe driver.
The protocol indicate which ethernet port to use and port sequence.
2. Fixed bug:Confusing Ethernet port sequence.
Move the most right Ethernet port (when looking from the front
of the chassis) to the first one in BootManage for PXE boot.
https://bugs.linaro.org/show_bug.cgi?id=2657
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jason Zhang <zhangjinsong2@huawei.com>
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
This module install a protocol for SasDriverDxe. the protocol
include main information of sas controller, like controller ID,
enable or disable,base address of registers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jason Zhang <zhangjinsong2@huawei.com>
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
This module support updating the boot CPU firmware only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jason Zhang <zhangjinsong2@huawei.com>
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Modify the feature of BMC set boot option as switching generic
BDS. Break BMC SetBoot option out into BmcConfigBootLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Hisilicon-specific PlatformBootManagerLib added. It is convenient
to add specific feature, like BMC control boot option.
Remove Intel BDS from dsc file because it is out of use.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Jason Zhang <zhangjinsong2@huawei.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Add Processor Properties Topology Table, PPTT include
Processor hierarchy node, Cache Type Structure and ID structure.
PPTT is needed for lscpu command to show socket information correctly.
https://bugs.linaro.org/show_bug.cgi?id=3206
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
Reveiwed-by: Jeremy Linton <jeremy.linton@arm.com>
|
|
Move definition of Madt struct to head file, so PPTT driver
can include it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
Reveiwed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
A set of mostly Ebl-related Pcds are about to be deleted from
edk2. Delete references to them here to keep platforms building.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
A set of mostly Ebl-related Pcds are about to be deleted from
edk2. Delete references to them here to keep platforms building.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
A set of mostly Ebl-related Pcds are about to be deleted from
edk2. Delete references to them here to keep platforms building.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
'AMD Seattle' is not a firmware vendor, nor is 'LeMaker Cello' So
let's do what other platforms do, and default to 'EDK II' unless
it is overridden at build time by setting FIRMWARE_VENDOR.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the ConsolePrefDxe driver so we can get the console on the framebuffer
rather than on the serial port.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the first part of the flash device (FD) to the capsule image so we
can update the secure and SCP firmware in one go along with the UEFI
firmware volume (FV).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Switch to the split prebuilt firmware image for the SCP and the AP
secure world. This allows Overdrive and Cello to share the latter
image, which we will update shortly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Implement support for the SynQuacer eMMC controller. This involves an
implementation of the SD/MMC override protocol to handle a couple of
quirks that would otherwise prevent this IP from being driven by the
generic SDHCI driver.
Also, add a HII page to the PlatformDxe driver that allows eMMC support
to be enabled, and wire it up for both DeveloperBox and EVB.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The base models could have different values for the revision ID field
in the System ID register. Base models do not have support for DVI
and so the revision ID field should also be masked out when checking
for the presence of DVI support.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
[Reworded adjacent code comments.]
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Reuse the BootLogoLib graphical progress bar to show the progress of a
capsule update, and in absence of a graphical console, write a period
to the text console for each block updated.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Even though the ARM ARM quite clearly states that the CNTFRQ field of
each MMIO timer frame should be a read-only alias of the CNTFRQ field
of the base frame, the SynQuacer SoC implements it as a register that
is programmable separately.
So let's program it from the hardware rather than overriding the
frequency using a DT property.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the drivers that make the serial and graphical console behave more
intuitively.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the RamDiskDxe driver, which is required for HTTP booting .iso
images.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add menu options to the SynQuacer Platform menu screen to limit the
maximum PCIe link speed for each slot individually. This may be useful
to work around potential PCIe issues.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The upstream version of the Linux NETSEC driver expects the PHY DT
node to appear under a MDIO subnode, so fix this in the device tree.
Fix the node name as well, this should be 'ethernet' not 'netsec',
and add a clock-names property describing the single clock reference
as 'phy_ref_clk'.
Also, move the PHY subnode into the per-platform .dts file so we can
set the unit address in the node name. This is necessary because recent
versions of the DT compiler are more finicky about this.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Align the UART DT nodes:
- use 'uart' not 'fuart' as node name for the second serial port
- create an alias 'serial1' for the second serial port
- use UART clock reference instead of hardcoded frequency
- split 'clocks' property into 1 cell per phandle
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
To ensure that the I2C master protocol is installed immediately onto
the handles created by PlatformDxe in its entry point, force the
SynQuacerI2cDxe driver to be loaded before PlatformDxe. These handles
are recursively connected by the DXE core as soon as they appear, and
so ensuring that the I2C master protocol driver is available at this
time will ensure that these handles will be connected to it right away.
This is useful when implementations of architectural protocols such as
RTC or the EFI variable store, which should become available long before
the ordinary dispatch of UEFI driver model drivers is started at the end
of DXE, are based on I2C.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove a %r without an associated parameter.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Instead of registering a notification callback on the driver binding
protocol, and attempting to connect our I2C master handle each time
a new driver is registered, switch to the more obvious approach of
registering a notification callback on the I2C master protocol directly.
The original code was written under the assumption that it would make
the RTC available at an earlier time, but given that all handles that
are created during the execution of a driver entry point are connected
by DXE core right away (i.e., before StartImage() returns), this is not
really necessary, and in fact, may result in the driver already having
been connected by the time we attempt to connect it.
Note that it is now up to the platform to ensure that ConnectController()
is called for the handle if DXE core does not call it by itself, or does
call it but at a time when no I2C master protocol driver is available
yet.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Do a global replace of gPcf8563RealTimeClockLibI2cMasterProtolGuid with
gPcf8563RealTimeClockLibI2cMasterProtocolGuid.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The ASM1061 SATA controller integrated into the DeveloperBox board
emits too much electromagnetic radiation, so it needs spread spectrum
mode enabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Flash memory is mapped as device memory and should use only aligned
accesses.
Update VariableRuntimeDxe from using BaseMemoryLibOptDxe to the generic
BaseMemoryLib which provides aligned memory access only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alexei Fedorov <Alxei.Fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Remove unused ArmPlatformPkg PCDs from all platform descriptions.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Before retiring the gArmPlatformTokenSpaceGuid.PcdFirmwareVendor PCD,
replace the only remaining and vaguely non-pointless reference with
a new dedicated PCD defined in VExpressPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
For some reason, the Asmedia 118x PCIe switch needs a little help to
make sure that the downstream links train at Gen2 speed. So add a
PCI I/O protocol notifier that implements this for each PCIe downstream
port that is present on the system.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In order to be able to use UART #0 on the DeveloperBox's 96boards low
speed connector, expose it to the OS by adding a node to the device
tree. This requires a CM3 firmware build that makes the SCP detach
from the serial port after boot.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Masahisa KOJIMA <kojima.masahisa@socionext.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The EVB does not boot if PCI RC #0 has no card inserted, and will hang in
the PCIe initialization code. So let's check the presence detect GPIO,
and only enable PCI RC #0 if it is asserted.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
If a PCIe RC is not enabled (due to the fact that the slot is not
populated), set its DT node 'status' property to 'disabled' so that
the OS will not attempt to attach to it.
This means we will need to switch from the default DtPlatformDtbLoaderLib
to a special one for our platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In order to accommodate the EVB, whose PCIe RC #0 should not be touched
by software if no card is inserted, add a PCD that tells the PCIe driver
code which RCs should be initialized and exposed to the PCI host bridge
driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Attempt to adhere more closely to the PCIe spec by ensuring that PERST#
remains asserted for at least 100 ms. Give it a good margin, and delay
for 150 ms; the additional boot time delay is not going to be noticeable
by anyone anyway.
Add some missing barriers as well, so that the reset takes effect right
when we think it does.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Expose the contents of the .DSC macro BUILD_NUMBER via the
PCD gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString (if > 1),
and as the FMP system firmware version (for capsule update).
Also, set the firmware vendor PCD to the contents of the macro
FIRMWARE_VENDOR so that we can set its value at build time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
It appears that whatever was preventing us from using CPU idle with
PSCI low power states has disappeared, so let's enable the low power
states in the DT.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Update the TC2 .dsc and .fdf files to switch over to the refactored
LCD graphics output driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Update the FVP .dsc and .fdf files to switch over to the refactored LCD
graphics output driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In the rework between v1 and v2 of my ArmPlatformPkg cleanup series,
I restored the LCD output graphics drivers in mainline EDK2, but
forgot to restore some of the PCDs that now remain in ArmPlatformPkg
as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
BootMonFs and ArmShellCmdRunAxf are only used on development boards
manufactured by ARM itself, so let's keep it under Platform/ARM where
it belongs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Import the pieces that are closely tied to the ARM Versatile Express
development platforms into edk2-platforms, so they can be removed from
upstream EDK2.
Note that this includes the ArmPlatformSysConfigLib library class, which
is not used anywhere else.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
'PciEmulation' is not a proper naming for a driver, which
uses NonDiscoverableDeviceRegistrationLib for handling
the devices attached via internal bus of the SoC.
Rename it to MvNonDiscoverableDxe and move under
Silicon/Marvell/Drivers directory.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
MvEeprom driver nesting into additional Devices directory
under Silicon/Marvell/Drivers/I2c is redundant. Align
its level with MvI2cDxe.
Change MvEeprom to MvEepromDxe in order to be
more consistent in Marvell drivers naming.
On the occasion add sorting in the .inf file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
MvPhyDxe driver nesting into additional Phy directory
under Silicon/Marvell/Drivers/Net is redundant. Align
its level with MvMdioDxe and Pp2Dxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
