| Age | Commit message (Collapse) | Author |
|---|
|
Hitherto MvSpiDxe driver name was very generic. In order to
be ready for adding new SPI master drivers, use the controller's
traditional name (it's called SPI Orion in Linux and
U-Boot) for files and the entry point.
Additionally, move the files to new 'MvSpiOrionDxe' directory
and rename the 'Devices' and 'Variables' to reflect actual drivers'
names. Change MvSpiFlash to MvSpiFlashDxe in order to be
more consistent. On the occasion add sorting in the .inf files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Hitherto fd file name was pretty generic, so use one,
which reflects actual board model.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
As a part of files reorganization, switch to using '7k8k'
in all SoC-specific driver/library code instead of
'70x0'/'7040', so that to ensure consistent naming for
entire SoC family.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
In edk2-platforms it is expected to provide a separation between
SoC and boards files in 'Silicon' and 'Platform' directories
accordingly.
This patch aligns Marvell code to this requirement with no functional
changes in the actual source files, unless required due to modified
paths. Change the supported board's files names to proper Armada70x0Db.
Also rename 'Armada' directory to 'Armada7k8k' in order to properly
refer to the SoC family and prevent confusion in future, when
adding new Armada machines. On the occasion add ARM copyright,
which was wrongly missing in the dsc.inc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Commit ce95ec196da0 ("Silicon/SynQuacer: enable coherent DMA for NETSEC
and eMMC") introduced a call to MmioOr32 into PlatformDxe without adding
the appropriate #include and LibraryClass references, resulting in build
failures when attempting to build the SynQuacer platforms. So add them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
As it turns out, it is surprisingly easy to configure both the NETSEC
and eMMC devices as cache coherent for DMA, given that they are both
behind the same SMMU which is already configured in passthrough mode
by the firmware running on the SCP.
So update the static SMMU configuration to make memory accesses performed
by these devices inner shareable inner/outer writeback cacheable, which
makes them cache coherent with the CPUs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This patch removes unused macros defined in MvPhyDxe.h, as well
as improves the style and comments. Pick single definition
of the autonegotiation timeout - two different macros were used
for the same purpose.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
fupdate command's usage information referred to a deprecated
'-f' flag in 'examples' section. It was a residue from the
initial version of the application, removed during review
before merging to upstream branch. Correct the help information
and also on the occasion improve the message and its style.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Proper watchdog control base is 0xf0610000, so fix the
incorrect value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
After removal of the tftp library in EDK2, the tftp was
disabled on Armada platform. Re-enable this functionality
as a dynamic command on Armada 70x0 DB board. For this
purpose add it as an option, depending on a new
INCLUDE_TFTP_COMMAND parameter, which can be passed
in the command line during build time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
D02, D03 and D05 all have nice conditional clauses to only include
the non-standard tftp shell command ifdef(INCLUDE_TFTP_COMMAND).
Unfortunately, they all explicitly set DEFINE INCLUDE_TFTP_COMMAND=1 in
their platform description files, meaning there is no way to exclude the
command without an editor.
So remove the DEFINE and let people specify on the command line whether
to include it, as originally intended.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Commit b324d85a466b,
("Hisilicon D03/D05: get firmware version from FIRMWARE_VER"),
added some non CRLF line endings, resolve this.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
The I2C driver prints a warning under DEBUG when a I2C transaction times
out. This will occur on the rev 0.1 DeveloperBox boards due to a board
level error in the I2C routing (unless the MCU has been lifted off the
bus).
Currently, this will trigger a crash due to a missing __FUNCTION__
argument to a %a specifier in a DEBUG string, because instead, the code
will attempt to dereference a EFI_STATUS variable as a char pointer.
So add the missing __FUNCTION__ argument.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Now that we incorporated NorFlashInfoLib into the Fip006Dxe driver,
replace the code that explicitly enables flag status register polling
for Micron NOR flash with a test of the flags field provided by
NorFlashInfoLib, which carries the same information.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pipat Methavanitpong <methavanitpong.pipat@socionext.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
As it turns out, getting the PCIe controllers to switch to Gen2 speed
is surprisingly easy. It only involves setting the 'speed change' bit
in the controller at initialization time, after which the hardware
will automatically attempt to switch to Gen2 speed after training at
Gen1 speed has completed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Fix the weird indentation in the various #defines in the file containing
the RC init code. This is a whitespace only change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The function ArmPlatformInitializeSystemMemory () has been removed from
ArmPlatformLib, so remove all the [empty] implementations provided by
the various platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Wire up the non-volatile EFI variable store support, by switching from
the emulation driver to the real one. Define default values for
memory mapped SPI access, which must be configured by the early
firmware. In order to ensure proper execution, configure initialization
order with Depex entries.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This patch applies necessary modifications, which allow to use
MvSpiDxe driver in variable support as a runtime service.
The driver's type is modified to DXE_RUNTIME_DRIVER, as well as
a new callback is introduced as a part of the SpiMasterProtocol.
It configures the memory space for mmio access to the host
controller registers.
Apply locking in the driver only during boot services. Once at
runtime, resource protection is handled by the operating system.
Moreover ensure proper execution order before MvSpiFlashDxe
(and hence MvFvbDxe) by setting according Depex dependency.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This patch applies necessary modifications, which allow to use
MvSpiFlash driver in variable support as a runtime service.
Its type is modified to DXE_RUNTIME_DRIVER, as well as
an event is created, which converts the pointers to the
SpiMasterProtocol and its routines. In order to ensure proper
execution of the MvFvbDxe driver, configure initialization
order with Depex entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
MvFvbDxe driver introduces non-volatile EFI variable support
for Armada platforms. It relies on memory-mapped SPI read access.
Implementation of EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL
is done with using existing Marvell SPI infrastructure
(SpiMasterProtocol and SpiFlashProtocol), thanks to which
this driver will be able to support various combinations of
flash devices and host controllers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Cello, Overdrive, Overdrive1000 and Armada still include the
now-defunct library implementation of the Shell tftp command.
Since the command is a nonstandard one anyway, just remove
it from the build for these platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Remove references to the ArmPlatformPkg PCD PcdSystemMemoryInitializeInSec,
which is only used on PrePeiCore platforms anyway, and which has no effect
whatsoever given that it decides when ArmPlatformInitializeSystemMemory()
is called, which is implemented as an empty function by all these platforms
anyway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
EDK2 changed the tftp shell command from a library to a
dynamic command. Update configuration files to reflect this.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Upstream EDK2 has refactored the implementation of the TFTP Shell
command so update the ARM platforms accordingly.
Instead of having to add the new module to all .FDF files under
Platform/ARM, add it to the 'networking FDF' include file and
include that everywhere. Also, add a build time option to omit
the TFTP command.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The ArmPkg BdsLib has been dropped from EDK2, and is no longer
required by the Android*Boot applications - so delete the
reference to fix the resulting build failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
The function ArmGetCpuCountPerCluster () was moved out of ArmPlatformLib
because it was unused (except internally by one of the implementations)
So remove the remaining implementations from edk2-platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Move to our own private copy of FdtPlatformDxe and BdsLib so that we
can get rid of the upstream version.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Move Juno to the migrated version of FdtPlatformDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Import FdtPlatformDxe from EmbeddedPkg into Platform/ARM, given that it
is not used anywhere else, nor should it be.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
We are about to migrate the only remaining user of the deprecated ARM
BdsLib, i.e., FdtPlatformDxe, into Platform/ARM. So create our own
copy of BdsLib, allowing us to finally remove it from upstream EDK2.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Switch to the new version of PL011UartLib which supersedes the one
residing in Drivers/ inappropriately.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove all gEmbeddedTokenSpaceGuid.PcdEmbeddedPrompt assignments, which
are no longer meaningful with EBL removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
No drivers actually use PL35xSmcLib so remove any resolutions for it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
None of these platforms still include EBL, but some references
remained to its support libraries. Get rid of that.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
These platforms don't actually include the SP804 driver so no need
to set the PCDs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
ArmVExpress.dsc.inc declares a TimerLib dependency and resolves it
using ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.inf, but
all users of the include file supersede it with ArmArchTimerLib.inf
so let's just use that instead.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Move ArmJunoPkg into edk2-platforms, so it can be removed from the main
EDK2 tree.
This allows use to remove the dodgy -I arguments to GCC to build shared
modules with a different copy of ArmPlatform.h, which was making it very
difficult to properly split the various modules into their own packages.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove false copy-pasted dependencies on various VExpress support
libraries.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
No FVP driver uses this library so remove the resolution.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove copy-pasted ArmTrustedMonitorLib library class resolutions
that none of the platforms actually need.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Remove copy-pasted ArmPlatformSecExtraActionLib library class resolutions
that none of the platforms actually need.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the drivers, library resolutions and PCD settings to enable RTC
support on DeveloperBox. Also, update PlatformDxe to register the
non-discoverable device handles for both I2C controllers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add a RealTimeClockLib implementation for the NXP PCF8563 as used on
the Socionext Developer Box board. Note that the standard I2C protocol
stack does not support runtime use, so this driver invokes the I2C master
protocol directly. This requires support from the platform side as well,
and so this driver will only attach to a I2C master that has the
gPcf8563RealTimeClockLibI2cMasterProtolGuid protocol installed on its
handle. It is up to the platform to ensure that the driver producing
the I2C master protocol in question is runtime capable, and is not
shared with the I2C protocol stack (i.e., it should not have the I2C
Bus Configuration Management protocol installed as well).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add a driver that produces the I2C master protocol on top of the I2C
controllers that are implemented in the SynQuacer Socionext SoC. Note
that this supports two modes simultaneously: I2C controllers that are
only usable at boot time, and usable via the I2C protocol stack, and
I2C controllers that are dedicated for the RTC or other runtime
components.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Describe the SynQuacer SoC's eMMC controller in DT so the OS can
attach to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Ordinary computers typically have a physical switch or jumper on the
board that allows non-volatile settings to be cleared. Let's implement
the same using DIP switch #1 on block #3, and clear the EFI variable
store if it is set to ON at boot time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In order to be able to sample the state of the DIP switches at early
boot on the Developer Box platform, implement the GPIO PPI based on
the GPIO block that is implemented in the SynQuacer SoC.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
In preparation of adding support for setting a DIP switch to clear the
EFI variable store, update the early capsule handling logic to take the
boot mode into account.
This is necessary for two reasons:
- we override the boot mode when a capsule is detected,
- the capsule detection itself involves reading a EFI variable, which we
shouldn't be doing if the varstore may be in a bad state.
So factor out the initial capsule check (to keep the code understandable)
and only perform it if we are not booting in 'clear NVRAM' mode.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add the power button as a gpio-keys KEY_POWER button, and mark it as
a wakeup source so it can be used under the OS both as a 'sleep' and
as a 'wake' button.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
