summaryrefslogtreecommitdiff
path: root/mm/memory_hotplug.c
AgeCommit message (Collapse)Author
2007-06-01memory hotplug: fix unnecessary calling of init_currenty_empty_zone()Yasunori Goto
zone->present_pages is updated in online_pages(). But, __add_zone() can be called twice or more before calling online_pages(). So, init_currenty_empty_zone() can be called unnecessary times. It is cause of memory leak of zone's wait_table. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-11[PATCH] Fix sparsemem on CellDave Hansen
Fix an oops experienced on the Cell architecture when init-time functions, early_*(), are called at runtime. It alters the call paths to make sure that the callers explicitly say whether the call is being made on behalf of a hotplug even, or happening at boot-time. It has been compile tested on ppc64, ia64, s390, i386 and x86_64. Acked-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Acked-by: Andy Whitcroft <apw@shadowen.org> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Get rid of zone_table[]Christoph Lameter
The zone table is mostly not needed. If we have a node in the page flags then we can get to the zone via NODE_DATA() which is much more likely to be already in the cpu cache. In case of SMP and UP NODE_DATA() is a constant pointer which allows us to access an exact replica of zonetable in the node_zones field. In all of the above cases there will be no need at all for the zone table. The only remaining case is if in a NUMA system the node numbers do not fit into the page flags. In that case we make sparse generate a table that maps sections to nodes and use that table to to figure out the node number. This table is sized to fit in a single cache line for the known 32 bit NUMA platform which makes it very likely that the information can be obtained without a cache miss. For sparsemem the zone table seems to be have been fairly large based on the maximum possible number of sections and the number of zones per node. There is some memory saving by removing zone_table. The main benefit is to reduce the cache foootprint of the VM from the frequent lookups of zones. Plus it simplifies the page allocator. [akpm@osdl.org: build fix] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01[PATCH] hot-add-mem x86_64: use CONFIG_MEMORY_HOTPLUG_RESERVEKeith Mannthey
The api for hot-add memory already has a construct for finding nodes based on an address, memory_add_physaddr_to_nid. This patch allows the fucntion to do something besides return 0. It uses the nodes_add infomation to lookup to node info for a hot add event. Signed-off-by: Keith Mannthey <kmannth@us.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01[PATCH] hot-add-mem x86_64: use CONFIG_MEMORY_HOTPLUG_SPARSEKeith Mannthey
Migate CONFIG_MEMORY_HOTPLUG to CONFIG_MEMORY_HOTPLUG_SPARSE where needed. Signed-off-by: Keith Mannthey <kmannth@us.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01[PATCH] hot-add-mem x86_64: fixup externsKeith Mannthey
Fix up externs in memory_hotplug.c. Cleanup. Signed-off-by: Keith Mannthey <kmannth@us.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29[PATCH] call mm/page-writeback.c:set_ratelimit() when new pages are hot-addedChandra Seetharaman
ratelimit_pages in page-writeback.c is recalculated (in set_ratelimit()) every time a CPU is hot-added/removed. But this value is not recalculated when new pages are hot-added. This patch fixes that problem by calling set_ratelimit() when new pages are hot-added. [akpm@osdl.org: cleanups] Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29[PATCH] cpuset: top_cpuset tracks hotplug changes to node_online_mapPaul Jackson
Change the list of memory nodes allowed to tasks in the top (root) nodeset to dynamically track what cpus are online, using a call to a cpuset hook from the memory hotplug code. Make this top cpus file read-only. On systems that have cpusets configured in their kernel, but that aren't actively using cpusets (for some distros, this covers the majority of systems) all tasks end up in the top cpuset. If that system does support memory hotplug, then these tasks cannot make use of memory nodes that are added after system boot, because the memory nodes are not allowed in the top cpuset. This is a surprising regression over earlier kernels that didn't have cpusets enabled. One key motivation for this change is to remain consistent with the behaviour for the top_cpuset's 'cpus', which is also read-only, and which automatically tracks the cpu_online_map. This change also has the minor benefit that it fixes a long standing, little noticed, minor bug in cpusets. The cpuset performance tweak to short circuit the cpuset_zone_allowed() check on systems with just a single cpuset (see 'number_of_cpusets', in linux/cpuset.h) meant that simply changing the 'mems' of the top_cpuset had no affect, even though the change (the write system call) appeared to succeed. With the following change, that write to the 'mems' file fails -EACCES, and the 'mems' file stubbornly refuses to be changed via user space writes. Thus no one should be mislead into thinking they've changed the top_cpusets's 'mems' when in affect they haven't. In order to keep the behaviour of cpusets consistent between systems actively making use of them and systems not using them, this patch changes the behaviour of the 'mems' file in the top (root) cpuset, making it read only, and making it automatically track the value of node_online_map. Thus tasks in the top cpuset will have automatic use of hot plugged memory nodes allowed by their cpuset. [akpm@osdl.org: build fix] [bunk@stusta.de: build fix] Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] memory hotadd fixes: enhance collision checkKAMEZAWA Hiroyuki
This patch is for collision check enhancement for memory hot add. It's better to do resouce collision check before doing memory hot add, which will touch memory management structures. And add_section() should check section exists or not before calling sparse_add_one_section(). (sparse_add_one_section() will do another check anyway. but checking in memory_hotplug.c will be easy to understand.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: keith mannthey <kmannth@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] memory hotadd fixes: find_next_system_ram catch range fixKAMEZAWA Hiroyuki
find_next_system_ram() is used to find available memory resource at onlining newly added memory. This patch fixes following problem. find_next_system_ram() cannot catch this case. Resource: (start)-------------(end) Section : (start)-------------(end) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Keith Mannthey <kmannth@gmail.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] memory hotadd fixes: not-aligned memory hotadd handling fixKAMEZAWA Hiroyuki
ioresouce handling code in memory hotplug allows not-aligned memory hot add. But when memmap and other memory structures are initialized, parameters should be aligned. (if not aligned, initialization of mem_map will do wrong, it assumes parameters are aligned.) This patch fix it. And this patch allows ioresource collision check to handle -EEXIST. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Keith Mannthey <kmannth@gmail.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27[PATCH] Register sysfs file for hotplugged new nodeYasunori Goto
When new node becomes enable by hot-add, new sysfs file must be created for new node. So, if new node is enabled by add_memory(), register_one_node() is called to create it. In addition, I386's arch_register_node() and a part of register_nodes() of powerpc are consolidated to register_one_node() as a generic_code(). This is tested by Tiger4(IPF) with node hot-plug emulation. Signed-off-by: Keiichiro Tokunaga <tokuanga.keiich@jp.fujitsu.com> Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] catch valid mem range at onlining memoryKAMEZAWA Hiroyuki
This patch allows hot-add memory which is not aligned to section. Now, hot-added memory has to be aligned to section size. Considering big section sized archs, this is not useful. When hot-added memory is registerd as iomem resoruce by iomem resource patch, we can make use of that information to detect valid memory range. Note: With this, not-aligned memory can be registerd. To allow hot-add memory with holes, we have to do more work around add_memory(). (It doesn't allows add memory to already existing mem section.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] register hot-added memory to iomem resourceKAMEZAWA Hiroyuki
Register hot-added memory to iomem_resource. With this, /proc/iomem can show hot-added memory. Note: kdump uses /proc/iomem to catch memory range when it is installed. So, kdump should be re-installed after /proc/iomem change. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] pgdat allocation for new node add (call pgdat allocation)Yasunori Goto
Add node-hot-add support to add_memory(). node hotadd uses this sequence. 1. allocate pgdat. 2. refresh NODE_DATA() 3. call free_area_init_node() to initialize 4. create sysfs entry 5. add memory (old add_memory()) 6. set node online 7. run kswapd for new node. (8). update zonelist after pages are onlined. (This is already merged in -mm due to update phase is difference.) Note: To make common function as much as possible, there is 2 changes from v2. - The old add_memory(), which is defiend by each archs, is renamed to arch_add_memory(). New add_memory becomes caller of arch dependent function as a common code. - This patch changes add_memory()'s interface From: add_memory(start, end) TO : add_memory(nid, start, end). It was cause of similar code that finding node id from physical address is inside of old add_memory() on each arch. In addition, acpi memory hotplug driver can find node id easier. In v2, it must walk DSDT'S _CRS by matching physical address to get the handle of its memory device, then get _PXM and node id. Because input is just physical address. However, in v3, the acpi driver can use handle to get _PXM and node id for the new memory device. It can pass just node id to add_memory(). Fix interface of arch_add_memory() is in next patche. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] pgdat allocation for new node add (specify node id)Yasunori Goto
Change the name of old add_memory() to arch_add_memory. And use node id to get pgdat for the node at NODE_DATA(). Note: Powerpc's old add_memory() is defined as __devinit. However, add_memory() is usually called only after bootup. I suppose it may be redundant. But, I'm not well known about powerpc. So, I keep it. (But, __meminit is better at least.) Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] update vm_total_pages at memory hotaddKAMEZAWA Hiroyuki
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] wait_table and zonelist initializing for memory hotadd: update zonelistsYasunori Goto
In current code, zonelist is considered to be build once, no modification. But MemoryHotplug can add new zone/pgdat. It must be updated. This patch modifies build_all_zonelists(). By this, build_all_zonelist() can reconfig pgdat's zonelists. To update them safety, this patch use stop_machine_run(). Other cpus don't touch among updating them by using it. In old version (V2 of node hotadd), kernel updated them after zone initialization. But present_page of its new zone is still 0, because online_page() is not called yet at this time. Build_zonelists() checks present_pages to find present zone. It was too early. So, I changed it after online_pages(). Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] wait_table and zonelist initializing for memory hotadd: add return ↵Yasunori Goto
code for init_current_empty_zone When add_zone() is called against empty zone (not populated zone), we have to initialize the zone which didn't initialize at boot time. But, init_currently_empty_zone() may fail due to allocation of wait table. So, this patch is to catch its error code. Changes against wait_table is in the next patch. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-31[PATCH] spanned_pages is not updated at a case of memory hot-addYasunori Goto
From: Yasunori Goto <y-goto@jp.fujitsu.com> If hot-added memory's address is smaller than old area, spanned_pages will not be updated. It must be fixed. example) Old zone_start_pfn = 0x60000, and spanned_pages = 0x10000 Added new memory's start_pfn = 0x50000, and end_pfn = 0x60000 new spanned_pages will be still 0x10000 by old code. (It should be updated to 0x20000.) Because old_zone_end_pfn will be 0x70000, and end_pfn smaller than it. So, spanned_pages will not be updated. In current code, spanned_pages is updated only when end_pfn is updated. But, it should be updated by subtraction between bigger end_pfn and new zone_start_pfn. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01[PATCH] spufs: fix for CONFIG_NUMAJoel H Schopp
Based on an older patch from Mike Kravetz <kravetz@us.ibm.com> We need to have a mem_map for high addresses in order to make fops->no_page work on spufs mem and register files. So far, we have used the memory_present() function during early bootup, but that did not work when CONFIG_NUMA was enabled. We now use the __add_pages() function to add the mem_map when loading the spufs module, which is a lot nicer. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-09[PATCH] memory hotadd: pgdat->node_present_pages fixYasunori Goto
When pages are onlined, not only zone->present_pages but also pgdat->node_present_pages should be refreshed. This parameter is used to show information at /sys/device/system/node/nodeX/meminfo via si_meminfo_node(). So, it shows strange value for MemUsed which is calculated (node_present_pages - all zones free pages). Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] memhotplug: __add_section remove unused pgdat definitionAndy Whitcroft
__add_section defines an unused pointer to the zones pgdat. Remove this definition. This fixes a compile warning. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-13[PATCH] Fix calculation of grow_pgdat_span() in mm/memory_hotplug.cYasunori Goto
The calculation for node_spanned_pages at grow_pgdat_span() is clearly wrong. This is patch for it. (Please see grow_zone_span() to compare. It is correct.) Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Acked-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29[PATCH] memory hotplug: call setup_per_zone_pages_min after hotplugDave Hansen
From: IWAMOTO Toshihiro <iwamoto@valinux.co.jp> > I found the tests does not work well with Dave's patchset. > I've found the followings: > > - setup_per_zone_pages_min() calls should be added in > capture_page_range() and online_pages() > - lru_add_drain() should be called before try_to_migrate_pages() The following patch deals with the first item. Signed-off-by: IWAMOTO Toshihiro <iwamoto@valinux.co.jp> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29[PATCH] memory hotplug: move section_mem_map alloc to sparse.cDave Hansen
This basically keeps up from having to extern __kmalloc_section_memmap(). The vaddr_in_vmalloc_area() helper could go in a vmalloc header, but that header gets hard to work with, because it needs some arch-specific macros. Just stick it in here for now, instead of creating another header. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Lion Vollnhals <webmaster@schiggl.de> Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz> Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29[PATCH] memory hotplug: sysfs and add/remove functionsDave Hansen
This adds generic memory add/remove and supporting functions for memory hotplug into a new file as well as a memory hotplug kernel config option. Individual architecture patches will follow. For now, disable memory hotplug when swsusp is enabled. There's a lot of churn there right now. We'll fix it up properly once it calms down. Signed-off-by: Matt Tolentino <matthew.e.tolentino@intel.com> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>