summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/Kconfig4
-rw-r--r--drivers/mtd/ar7part.c6
-rw-r--r--drivers/mtd/bcm47xxpart.c49
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0002.c217
-rw-r--r--drivers/mtd/cmdlinepart.c47
-rw-r--r--drivers/mtd/devices/Makefile4
-rw-r--r--drivers/mtd/devices/bcm47xxsflash.c55
-rw-r--r--drivers/mtd/devices/bcm47xxsflash.h15
-rw-r--r--drivers/mtd/devices/elm.c404
-rw-r--r--drivers/mtd/devices/m25p80.c100
-rw-r--r--drivers/mtd/maps/Kconfig2
-rw-r--r--drivers/mtd/maps/physmap_of.c9
-rw-r--r--drivers/mtd/maps/uclinux.c30
-rw-r--r--drivers/mtd/nand/atmel_nand.c141
-rw-r--r--drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h4
-rw-r--r--drivers/mtd/nand/bcm47xxnflash/main.c14
-rw-r--r--drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c4
-rw-r--r--drivers/mtd/nand/davinci_nand.c24
-rw-r--r--drivers/mtd/nand/fsl_ifc_nand.c233
-rw-r--r--drivers/mtd/nand/gpmi-nand/bch-regs.h22
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-lib.c9
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c63
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.h4
-rw-r--r--drivers/mtd/nand/mxc_nand.c11
-rw-r--r--drivers/mtd/nand/nand_base.c8
-rw-r--r--drivers/mtd/nand/nand_ecc.c5
-rw-r--r--drivers/mtd/nand/nandsim.c6
-rw-r--r--drivers/mtd/nand/omap2.c583
-rw-r--r--drivers/mtd/ofpart.c7
-rw-r--r--drivers/mtd/tests/mtd_nandecctest.c10
-rw-r--r--drivers/mtd/tests/mtd_stresstest.c8
-rw-r--r--drivers/mtd/tests/mtd_torturetest.c25
-rw-r--r--drivers/mtd/ubi/debug.h6
33 files changed, 1800 insertions, 329 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 03f2eb5627ec..557bec599f4f 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -74,8 +74,8 @@ config MTD_REDBOOT_PARTS_READONLY
endif # MTD_REDBOOT_PARTS
config MTD_CMDLINE_PARTS
- bool "Command line partition table parsing"
- depends on MTD = "y"
+ tristate "Command line partition table parsing"
+ depends on MTD
---help---
Allow generic configuration of the MTD partition tables via the kernel
command line. Multiple flash resources are supported for hardware where
diff --git a/drivers/mtd/ar7part.c b/drivers/mtd/ar7part.c
index 7c057a05adb6..ddc0a4287a4b 100644
--- a/drivers/mtd/ar7part.c
+++ b/drivers/mtd/ar7part.c
@@ -142,7 +142,13 @@ static int __init ar7_parser_init(void)
return register_mtd_parser(&ar7_parser);
}
+static void __exit ar7_parser_exit(void)
+{
+ deregister_mtd_parser(&ar7_parser);
+}
+
module_init(ar7_parser_init);
+module_exit(ar7_parser_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR( "Felix Fietkau <nbd@openwrt.org>, "
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index 6a1180502cc1..63feb75cc8e0 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -19,12 +19,6 @@
/* 10 parts were found on sflash on Netgear WNDR4500 */
#define BCM47XXPART_MAX_PARTS 12
-/*
- * Amount of bytes we read when analyzing each block of flash memory.
- * Set it big enough to allow detecting partition and reading important data.
- */
-#define BCM47XXPART_BYTES_TO_READ 0x404
-
/* Magics */
#define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
#define POT_MAGIC1 0x54544f50 /* POTT */
@@ -59,13 +53,21 @@ static int bcm47xxpart_parse(struct mtd_info *master,
uint32_t *buf;
size_t bytes_read;
uint32_t offset;
- uint32_t blocksize = 0x10000;
+ uint32_t blocksize = master->erasesize;
struct trx_header *trx;
+ int trx_part = -1;
+ int last_trx_part = -1;
+ int max_bytes_to_read = 0x8004;
+
+ if (blocksize <= 0x10000)
+ blocksize = 0x10000;
+ if (blocksize == 0x20000)
+ max_bytes_to_read = 0x18004;
/* Alloc */
parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
GFP_KERNEL);
- buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
+ buf = kzalloc(max_bytes_to_read, GFP_KERNEL);
/* Parse block by block looking for magics */
for (offset = 0; offset <= master->size - blocksize;
@@ -80,7 +82,7 @@ static int bcm47xxpart_parse(struct mtd_info *master,
}
/* Read beginning of the block */
- if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
+ if (mtd_read(master, offset, max_bytes_to_read,
&bytes_read, (uint8_t *)buf) < 0) {
pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
offset);
@@ -95,9 +97,16 @@ static int bcm47xxpart_parse(struct mtd_info *master,
}
/* Standard NVRAM */
- if (buf[0x000 / 4] == NVRAM_HEADER) {
+ if (buf[0x000 / 4] == NVRAM_HEADER ||
+ buf[0x1000 / 4] == NVRAM_HEADER ||
+ buf[0x8000 / 4] == NVRAM_HEADER ||
+ (blocksize == 0x20000 && (
+ buf[0x10000 / 4] == NVRAM_HEADER ||
+ buf[0x11000 / 4] == NVRAM_HEADER ||
+ buf[0x18000 / 4] == NVRAM_HEADER))) {
bcm47xxpart_add_part(&parts[curr_part++], "nvram",
offset, 0);
+ offset = rounddown(offset, blocksize);
continue;
}
@@ -131,6 +140,10 @@ static int bcm47xxpart_parse(struct mtd_info *master,
if (buf[0x000 / 4] == TRX_MAGIC) {
trx = (struct trx_header *)buf;
+ trx_part = curr_part;
+ bcm47xxpart_add_part(&parts[curr_part++], "firmware",
+ offset, 0);
+
i = 0;
/* We have LZMA loader if offset[2] points to sth */
if (trx->offset[2]) {
@@ -154,6 +167,8 @@ static int bcm47xxpart_parse(struct mtd_info *master,
offset + trx->offset[i], 0);
i++;
+ last_trx_part = curr_part - 1;
+
/*
* We have whole TRX scanned, skip to the next part. Use
* roundown (not roundup), as the loop will increase
@@ -169,11 +184,15 @@ static int bcm47xxpart_parse(struct mtd_info *master,
* Assume that partitions end at the beginning of the one they are
* followed by.
*/
- for (i = 0; i < curr_part - 1; i++)
- parts[i].size = parts[i + 1].offset - parts[i].offset;
- if (curr_part > 0)
- parts[curr_part - 1].size =
- master->size - parts[curr_part - 1].offset;
+ for (i = 0; i < curr_part; i++) {
+ u64 next_part_offset = (i < curr_part - 1) ?
+ parts[i + 1].offset : master->size;
+
+ parts[i].size = next_part_offset - parts[i].offset;
+ if (i == last_trx_part && trx_part >= 0)
+ parts[trx_part].size = next_part_offset -
+ parts[trx_part].offset;
+ }
*pparts = parts;
return curr_part;
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index b86197286f24..fff665d59a0d 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -33,6 +33,8 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/cfi.h>
@@ -74,6 +76,10 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
static int cfi_atmel_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+static int cfi_ppb_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+static int cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+static int cfi_ppb_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+
static struct mtd_chip_driver cfi_amdstd_chipdrv = {
.probe = NULL, /* Not usable directly */
.destroy = cfi_amdstd_destroy,
@@ -496,6 +502,7 @@ static void cfi_fixup_m29ew_delay_after_resume(struct cfi_private *cfi)
struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
{
struct cfi_private *cfi = map->fldrv_priv;
+ struct device_node __maybe_unused *np = map->device_node;
struct mtd_info *mtd;
int i;
@@ -570,6 +577,17 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
cfi_tell_features(extp);
#endif
+#ifdef CONFIG_OF
+ if (np && of_property_read_bool(
+ np, "use-advanced-sector-protection")
+ && extp->BlkProtUnprot == 8) {
+ printk(KERN_INFO " Advanced Sector Protection (PPB Locking) supported\n");
+ mtd->_lock = cfi_ppb_lock;
+ mtd->_unlock = cfi_ppb_unlock;
+ mtd->_is_locked = cfi_ppb_is_locked;
+ }
+#endif
+
bootloc = extp->TopBottom;
if ((bootloc < 2) || (bootloc > 5)) {
printk(KERN_WARNING "%s: CFI contains unrecognised boot "
@@ -2172,6 +2190,205 @@ static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
return cfi_varsize_frob(mtd, do_atmel_unlock, ofs, len, NULL);
}
+/*
+ * Advanced Sector Protection - PPB (Persistent Protection Bit) locking
+ */
+
+struct ppb_lock {
+ struct flchip *chip;
+ loff_t offset;
+ int locked;
+};
+
+#define MAX_SECTORS 512
+
+#define DO_XXLOCK_ONEBLOCK_LOCK ((void *)1)
+#define DO_XXLOCK_ONEBLOCK_UNLOCK ((void *)2)
+#define DO_XXLOCK_ONEBLOCK_GETLOCK ((void *)3)
+
+static int __maybe_unused do_ppb_xxlock(struct map_info *map,
+ struct flchip *chip,
+ unsigned long adr, int len, void *thunk)
+{
+ struct cfi_private *cfi = map->fldrv_priv;
+ unsigned long timeo;
+ int ret;
+
+ mutex_lock(&chip->mutex);
+ ret = get_chip(map, chip, adr + chip->start, FL_LOCKING);
+ if (ret) {
+ mutex_unlock(&chip->mutex);
+ return ret;
+ }
+
+ pr_debug("MTD %s(): XXLOCK 0x%08lx len %d\n", __func__, adr, len);
+
+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi,
+ cfi->device_type, NULL);
+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi,
+ cfi->device_type, NULL);
+ /* PPB entry command */
+ cfi_send_gen_cmd(0xC0, cfi->addr_unlock1, chip->start, map, cfi,
+ cfi->device_type, NULL);
+
+ if (thunk == DO_XXLOCK_ONEBLOCK_LOCK) {
+ chip->state = FL_LOCKING;
+ map_write(map, CMD(0xA0), chip->start + adr);
+ map_write(map, CMD(0x00), chip->start + adr);
+ } else if (thunk == DO_XXLOCK_ONEBLOCK_UNLOCK) {
+ /*
+ * Unlocking of one specific sector is not supported, so we
+ * have to unlock all sectors of this device instead
+ */
+ chip->state = FL_UNLOCKING;
+ map_write(map, CMD(0x80), chip->start);
+ map_write(map, CMD(0x30), chip->start);
+ } else if (thunk == DO_XXLOCK_ONEBLOCK_GETLOCK) {
+ chip->state = FL_JEDEC_QUERY;
+ /* Return locked status: 0->locked, 1->unlocked */
+ ret = !cfi_read_query(map, adr);
+ } else
+ BUG();
+
+ /*
+ * Wait for some time as unlocking of all sectors takes quite long
+ */
+ timeo = jiffies + msecs_to_jiffies(2000); /* 2s max (un)locking */
+ for (;;) {
+ if (chip_ready(map, adr))
+ break;
+
+ if (time_after(jiffies, timeo)) {
+ printk(KERN_ERR "Waiting for chip to be ready timed out.\n");
+ ret = -EIO;
+ break;
+ }
+
+ UDELAY(map, chip, adr, 1);
+ }
+
+ /* Exit BC commands */
+ map_write(map, CMD(0x90), chip->start);
+ map_write(map, CMD(0x00), chip->start);
+
+ chip->state = FL_READY;
+ put_chip(map, chip, adr + chip->start);
+ mutex_unlock(&chip->mutex);
+
+ return ret;
+}
+
+static int __maybe_unused cfi_ppb_lock(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len)
+{
+ return cfi_varsize_frob(mtd, do_ppb_xxlock, ofs, len,
+ DO_XXLOCK_ONEBLOCK_LOCK);
+}
+
+static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len)
+{
+ struct mtd_erase_region_info *regions = mtd->eraseregions;
+ struct map_info *map = mtd->priv;
+ struct cfi_private *cfi = map->fldrv_priv;
+ struct ppb_lock *sect;
+ unsigned long adr;
+ loff_t offset;
+ uint64_t length;
+ int chipnum;
+ int i;
+ int sectors;
+ int ret;
+
+ /*
+ * PPB unlocking always unlocks all sectors of the flash chip.
+ * We need to re-lock all previously locked sectors. So lets
+ * first check the locking status of all sectors and save
+ * it for future use.
+ */
+ sect = kzalloc(MAX_SECTORS * sizeof(struct ppb_lock), GFP_KERNEL);
+ if (!sect)
+ return -ENOMEM;
+
+ /*
+ * This code to walk all sectors is a slightly modified version
+ * of the cfi_varsize_frob() code.
+ */
+ i = 0;
+ chipnum = 0;
+ adr = 0;
+ sectors = 0;
+ offset = 0;
+ length = mtd->size;
+
+ while (length) {
+ int size = regions[i].erasesize;
+
+ /*
+ * Only test sectors that shall not be unlocked. The other
+ * sectors shall be unlocked, so lets keep their locking
+ * status at "unlocked" (locked=0) for the final re-locking.
+ */
+ if ((adr < ofs) || (adr >= (ofs + len))) {
+ sect[sectors].chip = &cfi->chips[chipnum];
+ sect[sectors].offset = offset;
+ sect[sectors].locked = do_ppb_xxlock(
+ map, &cfi->chips[chipnum], adr, 0,
+ DO_XXLOCK_ONEBLOCK_GETLOCK);
+ }
+
+ adr += size;
+ offset += size;
+ length -= size;
+
+ if (offset == regions[i].offset + size * regions[i].numblocks)
+ i++;
+
+ if (adr >> cfi->chipshift) {
+ adr = 0;
+ chipnum++;
+
+ if (chipnum >= cfi->numchips)
+ break;
+ }
+
+ sectors++;
+ if (sectors >= MAX_SECTORS) {
+ printk(KERN_ERR "Only %d sectors for PPB locking supported!\n",
+ MAX_SECTORS);
+ kfree(sect);
+ return -EINVAL;
+ }
+ }
+
+ /* Now unlock the whole chip */
+ ret = cfi_varsize_frob(mtd, do_ppb_xxlock, ofs, len,
+ DO_XXLOCK_ONEBLOCK_UNLOCK);
+ if (ret) {
+ kfree(sect);
+ return ret;
+ }
+
+ /*
+ * PPB unlocking always unlocks all sectors of the flash chip.
+ * We need to re-lock all previously locked sectors.
+ */
+ for (i = 0; i < sectors; i++) {
+ if (sect[i].locked)
+ do_ppb_xxlock(map, sect[i].chip, sect[i].offset, 0,
+ DO_XXLOCK_ONEBLOCK_LOCK);
+ }
+
+ kfree(sect);
+ return ret;
+}
+
+static int __maybe_unused cfi_ppb_is_locked(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len)
+{
+ return cfi_varsize_frob(mtd, do_ppb_xxlock, ofs, len,
+ DO_XXLOCK_ONEBLOCK_GETLOCK) ? 1 : 0;
+}
static void cfi_amdstd_sync (struct mtd_info *mtd)
{
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index c533f27d863f..721caebbc5cc 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -22,11 +22,22 @@
*
* mtdparts=<mtddef>[;<mtddef]
* <mtddef> := <mtd-id>:<partdef>[,<partdef>]
- * where <mtd-id> is the name from the "cat /proc/mtd" command
- * <partdef> := <size>[@offset][<name>][ro][lk]
+ * <partdef> := <size>[@<offset>][<name>][ro][lk]
* <mtd-id> := unique name used in mapping driver/device (mtd->name)
* <size> := standard linux memsize OR "-" to denote all remaining space
+ * size is automatically truncated at end of device
+ * if specified or trucated size is 0 the part is skipped
+ * <offset> := standard linux memsize
+ * if omitted the part will immediately follow the previous part
+ * or 0 if the first part
* <name> := '(' NAME ')'
+ * NAME will appear in /proc/mtd
+ *
+ * <size> and <offset> can be specified such that the parts are out of order
+ * in physical memory and may even overlap.
+ *
+ * The parts are assigned MTD numbers in the order they are specified in the
+ * command line regardless of their order in physical memory.
*
* Examples:
*
@@ -70,6 +81,7 @@ struct cmdline_mtd_partition {
static struct cmdline_mtd_partition *partitions;
/* the command line passed to mtdpart_setup() */
+static char *mtdparts;
static char *cmdline;
static int cmdline_parsed;
@@ -330,6 +342,14 @@ static int parse_cmdline_partitions(struct mtd_info *master,
if (part->parts[i].size == SIZE_REMAINING)
part->parts[i].size = master->size - offset;
+ if (offset + part->parts[i].size > master->size) {
+ printk(KERN_WARNING ERRP
+ "%s: partitioning exceeds flash size, truncating\n",
+ part->mtd_id);
+ part->parts[i].size = master->size - offset;
+ }
+ offset += part->parts[i].size;
+
if (part->parts[i].size == 0) {
printk(KERN_WARNING ERRP
"%s: skipping zero sized partition\n",
@@ -337,16 +357,8 @@ static int parse_cmdline_partitions(struct mtd_info *master,
part->num_parts--;
memmove(&part->parts[i], &part->parts[i + 1],
sizeof(*part->parts) * (part->num_parts - i));
- continue;
- }
-
- if (offset + part->parts[i].size > master->size) {
- printk(KERN_WARNING ERRP
- "%s: partitioning exceeds flash size, truncating\n",
- part->mtd_id);
- part->parts[i].size = master->size - offset;
+ i--;
}
- offset += part->parts[i].size;
}
*pparts = kmemdup(part->parts, sizeof(*part->parts) * part->num_parts,
@@ -365,7 +377,7 @@ static int parse_cmdline_partitions(struct mtd_info *master,
*
* This function needs to be visible for bootloaders.
*/
-static int mtdpart_setup(char *s)
+static int __init mtdpart_setup(char *s)
{
cmdline = s;
return 1;
@@ -381,10 +393,21 @@ static struct mtd_part_parser cmdline_parser = {
static int __init cmdline_parser_init(void)
{
+ if (mtdparts)
+ mtdpart_setup(mtdparts);
return register_mtd_parser(&cmdline_parser);
}
+static void __exit cmdline_parser_exit(void)
+{
+ deregister_mtd_parser(&cmdline_parser);
+}
+
module_init(cmdline_parser_init);
+module_exit(cmdline_parser_exit);
+
+MODULE_PARM_DESC(mtdparts, "Partitioning specification");
+module_param(mtdparts, charp, 0);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index 395733a30ef4..369a1943ca25 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -17,8 +17,10 @@ obj-$(CONFIG_MTD_LART) += lart.o
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
+obj-$(CONFIG_MTD_NAND_OMAP_BCH) += elm.o
obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o
obj-$(CONFIG_MTD_SST25L) += sst25l.o
obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o
-CFLAGS_docg3.o += -I$(src) \ No newline at end of file
+
+CFLAGS_docg3.o += -I$(src)
diff --git a/drivers/mtd/devices/bcm47xxsflash.c b/drivers/mtd/devices/bcm47xxsflash.c
index 4714584aa993..95266285acb1 100644
--- a/drivers/mtd/devices/bcm47xxsflash.c
+++ b/drivers/mtd/devices/bcm47xxsflash.c
@@ -5,6 +5,8 @@
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
+#include "bcm47xxsflash.h"
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Serial flash driver for BCMA bus");
@@ -13,26 +15,28 @@ static const char *probes[] = { "bcm47xxpart", NULL };
static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
- struct bcma_sflash *sflash = mtd->priv;
+ struct bcm47xxsflash *b47s = mtd->priv;
/* Check address range */
if ((from + len) > mtd->size)
return -EINVAL;
- memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(sflash->window + from),
+ memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(b47s->window + from),
len);
+ *retlen = len;
return len;
}
-static void bcm47xxsflash_fill_mtd(struct bcma_sflash *sflash,
- struct mtd_info *mtd)
+static void bcm47xxsflash_fill_mtd(struct bcm47xxsflash *b47s)
{
- mtd->priv = sflash;
+ struct mtd_info *mtd = &b47s->mtd;
+
+ mtd->priv = b47s;
mtd->name = "bcm47xxsflash";
mtd->owner = THIS_MODULE;
mtd->type = MTD_ROM;
- mtd->size = sflash->size;
+ mtd->size = b47s->size;
mtd->_read = bcm47xxsflash_read;
/* TODO: implement writing support and verify/change following code */
@@ -40,19 +44,30 @@ static void bcm47xxsflash_fill_mtd(struct bcma_sflash *sflash,
mtd->writebufsize = mtd->writesize = 1;
}
-static int bcm47xxsflash_probe(struct platform_device *pdev)
+/**************************************************
+ * BCMA
+ **************************************************/
+
+static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
{
struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+ struct bcm47xxsflash *b47s;
int err;
- sflash->mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
- if (!sflash->mtd) {
+ b47s = kzalloc(sizeof(*b47s), GFP_KERNEL);
+ if (!b47s) {
err = -ENOMEM;
goto out;
}
- bcm47xxsflash_fill_mtd(sflash, sflash->mtd);
+ sflash->priv = b47s;
- err = mtd_device_parse_register(sflash->mtd, probes, NULL, NULL, 0);
+ b47s->window = sflash->window;
+ b47s->blocksize = sflash->blocksize;
+ b47s->numblocks = sflash->numblocks;
+ b47s->size = sflash->size;
+ bcm47xxsflash_fill_mtd(b47s);
+
+ err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0);
if (err) {
pr_err("Failed to register MTD device: %d\n", err);
goto err_dev_reg;
@@ -61,34 +76,40 @@ static int bcm47xxsflash_probe(struct platform_device *pdev)
return 0;
err_dev_reg:
- kfree(sflash->mtd);
+ kfree(&b47s->mtd);
out:
return err;
}
-static int bcm47xxsflash_remove(struct platform_device *pdev)
+static int bcm47xxsflash_bcma_remove(struct platform_device *pdev)
{
struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+ struct bcm47xxsflash *b47s = sflash->priv;
- mtd_device_unregister(sflash->mtd);
- kfree(sflash->mtd);
+ mtd_device_unregister(&b47s->mtd);
+ kfree(b47s);
return 0;
}
static struct platform_driver bcma_sflash_driver = {
- .remove = bcm47xxsflash_remove,
+ .probe = bcm47xxsflash_bcma_probe,
+ .remove = bcm47xxsflash_bcma_remove,
.driver = {
.name = "bcma_sflash",
.owner = THIS_MODULE,
},
};
+/**************************************************
+ * Init
+ **************************************************/
+
static int __init bcm47xxsflash_init(void)
{
int err;
- err = platform_driver_probe(&bcma_sflash_driver, bcm47xxsflash_probe);
+ err = platform_driver_register(&bcma_sflash_driver);
if (err)
pr_err("Failed to register BCMA serial flash driver: %d\n",
err);
diff --git a/drivers/mtd/devices/bcm47xxsflash.h b/drivers/mtd/devices/bcm47xxsflash.h
new file mode 100644
index 000000000000..ebf6f710e23c
--- /dev/null
+++ b/drivers/mtd/devices/bcm47xxsflash.h
@@ -0,0 +1,15 @@
+#ifndef __BCM47XXSFLASH_H
+#define __BCM47XXSFLASH_H
+
+#include <linux/mtd/mtd.h>
+
+struct bcm47xxsflash {
+ u32 window;
+ u32 blocksize;
+ u16 numblocks;
+ u32 size;
+
+ struct mtd_info mtd;
+};
+
+#endif /* BCM47XXSFLASH */
diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c
new file mode 100644
index 000000000000..2ec5da9ee248
--- /dev/null
+++ b/drivers/mtd/devices/elm.c
@@ -0,0 +1,404 @@
+/*
+ * Error Location Module
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_data/elm.h>
+
+#define ELM_IRQSTATUS 0x018
+#define ELM_IRQENABLE 0x01c
+#define ELM_LOCATION_CONFIG 0x020
+#define ELM_PAGE_CTRL 0x080
+#define ELM_SYNDROME_FRAGMENT_0 0x400
+#define ELM_SYNDROME_FRAGMENT_6 0x418
+#define ELM_LOCATION_STATUS 0x800
+#define ELM_ERROR_LOCATION_0 0x880
+
+/* ELM Interrupt Status Register */
+#define INTR_STATUS_PAGE_VALID BIT(8)
+
+/* ELM Interrupt Enable Register */
+#define INTR_EN_PAGE_MASK BIT(8)
+
+/* ELM Location Configuration Register */
+#define ECC_BCH_LEVEL_MASK 0x3
+
+/* ELM syndrome */
+#define ELM_SYNDROME_VALID BIT(16)
+
+/* ELM_LOCATION_STATUS Register */
+#define ECC_CORRECTABLE_MASK BIT(8)
+#define ECC_NB_ERRORS_MASK 0x1f
+
+/* ELM_ERROR_LOCATION_0-15 Registers */
+#define ECC_ERROR_LOCATION_MASK 0x1fff
+
+#define ELM_ECC_SIZE 0x7ff
+
+#define SYNDROME_FRAGMENT_REG_SIZE 0x40
+#define ERROR_LOCATION_SIZE 0x100
+
+struct elm_info {
+ struct device *dev;
+ void __iomem *elm_base;
+ struct completion elm_completion;
+ struct list_head list;
+ enum bch_ecc bch_type;
+};
+
+static LIST_HEAD(elm_devices);
+
+static void elm_write_reg(struct elm_info *info, int offset, u32 val)
+{
+ writel(val, info->elm_base + offset);
+}
+
+static u32 elm_read_reg(struct elm_info *info, int offset)
+{
+ return readl(info->elm_base + offset);
+}
+
+/**
+ * elm_config - Configure ELM module
+ * @dev: ELM device
+ * @bch_type: Type of BCH ecc
+ */
+void elm_config(struct device *dev, enum bch_ecc bch_type)
+{
+ u32 reg_val;
+ struct elm_info *info = dev_get_drvdata(dev);
+
+ reg_val = (bch_type & ECC_BCH_LEVEL_MASK) | (ELM_ECC_SIZE << 16);
+ elm_write_reg(info, ELM_LOCATION_CONFIG, reg_val);
+ info->bch_type = bch_type;
+}
+EXPORT_SYMBOL(elm_config);
+
+/**
+ * elm_configure_page_mode - Enable/Disable page mode
+ * @info: elm info
+ * @index: index number of syndrome fragment vector
+ * @enable: enable/disable flag for page mode
+ *
+ * Enable page mode for syndrome fragment index
+ */
+static void elm_configure_page_mode(struct elm_info *info, int index,
+ bool enable)
+{
+ u32 reg_val;
+
+ reg_val = elm_read_reg(info, ELM_PAGE_CTRL);
+ if (enable)
+ reg_val |= BIT(index); /* enable page mode */
+ else
+ reg_val &= ~BIT(index); /* disable page mode */
+
+ elm_write_reg(info, ELM_PAGE_CTRL, reg_val);
+}
+
+/**
+ * elm_load_syndrome - Load ELM syndrome reg
+ * @info: elm info
+ * @err_vec: elm error vectors
+ * @ecc: buffer with calculated ecc
+ *
+ * Load syndrome fragment registers with calculated ecc in reverse order.
+ */
+static void elm_load_syndrome(struct elm_info *info,
+ struct elm_errorvec *err_vec, u8 *ecc)
+{
+ int i, offset;
+ u32 val;
+
+ for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+
+ /* Check error reported */
+ if (err_vec[i].error_reported) {
+ elm_configure_page_mode(info, i, true);
+ offset = ELM_SYNDROME_FRAGMENT_0 +
+ SYNDROME_FRAGMENT_REG_SIZE * i;
+
+ /* BCH8 */
+ if (info->bch_type) {
+
+ /* syndrome fragment 0 = ecc[9-12B] */
+ val = cpu_to_be32(*(u32 *) &ecc[9]);
+ elm_write_reg(info, offset, val);
+
+ /* syndrome fragment 1 = ecc[5-8B] */
+ offset += 4;
+ val = cpu_to_be32(*(u32 *) &ecc[5]);
+ elm_write_reg(info, offset, val);
+
+ /* syndrome fragment 2 = ecc[1-4B] */
+ offset += 4;
+ val = cpu_to_be32(*(u32 *) &ecc[1]);
+ elm_write_reg(info, offset, val);
+
+ /* syndrome fragment 3 = ecc[0B] */
+ offset += 4;
+ val = ecc[0];
+ elm_write_reg(info, offset, val);
+ } else {
+ /* syndrome fragment 0 = ecc[20-52b] bits */
+ val = (cpu_to_be32(*(u32 *) &ecc[3]) >> 4) |
+ ((ecc[2] & 0xf) << 28);
+ elm_write_reg(info, offset, val);
+
+ /* syndrome fragment 1 = ecc[0-20b] bits */
+ offset += 4;
+ val = cpu_to_be32(*(u32 *) &ecc[0]) >> 12;
+ elm_write_reg(info, offset, val);
+ }
+ }
+
+ /* Update ecc pointer with ecc byte size */
+ ecc += info->bch_type ? BCH8_SIZE : BCH4_SIZE;
+ }
+}
+
+/**
+ * elm_start_processing - start elm syndrome processing
+ * @info: elm info
+ * @err_vec: elm error vectors
+ *
+ * Set syndrome valid bit for syndrome fragment registers for which
+ * elm syndrome fragment registers are loaded. This enables elm module
+ * to start processing syndrome vectors.
+ */
+static void elm_start_processing(struct elm_info *info,
+ struct elm_errorvec *err_vec)
+{
+ int i, offset;
+ u32 reg_val;
+
+ /*
+ * Set syndrome vector valid, so that ELM module
+ * will process it for vectors error is reported
+ */
+ for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+ if (err_vec[i].error_reported) {
+ offset = ELM_SYNDROME_FRAGMENT_6 +
+ SYNDROME_FRAGMENT_REG_SIZE * i;
+ reg_val = elm_read_reg(info, offset);
+ reg_val |= ELM_SYNDROME_VALID;
+ elm_write_reg(info, offset, reg_val);
+ }
+ }
+}
+
+/**
+ * elm_error_correction - locate correctable error position
+ * @info: elm info
+ * @err_vec: elm error vectors
+ *
+ * On completion of processing by elm module, error location status
+ * register updated with correctable/uncorrectable error information.
+ * In case of correctable errors, number of errors located from
+ * elm location status register & read the positions from
+ * elm error location register.
+ */
+static void elm_error_correction(struct elm_info *info,
+ struct elm_errorvec *err_vec)
+{
+ int i, j, errors = 0;
+ int offset;
+ u32 reg_val;
+
+ for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+
+ /* Check error reported */
+ if (err_vec[i].error_reported) {
+ offset = ELM_LOCATION_STATUS + ERROR_LOCATION_SIZE * i;
+ reg_val = elm_read_reg(info, offset);
+
+ /* Check correctable error or not */
+ if (reg_val & ECC_CORRECTABLE_MASK) {
+ offset = ELM_ERROR_LOCATION_0 +
+ ERROR_LOCATION_SIZE * i;
+
+ /* Read count of correctable errors */
+ err_vec[i].error_count = reg_val &
+ ECC_NB_ERRORS_MASK;
+
+ /* Update the error locations in error vector */
+ for (j = 0; j < err_vec[i].error_count; j++) {
+
+ reg_val = elm_read_reg(info, offset);
+ err_vec[i].error_loc[j] = reg_val &
+ ECC_ERROR_LOCATION_MASK;
+
+ /* Update error location register */
+ offset += 4;
+ }
+
+ errors += err_vec[i].error_count;
+ } else {
+ err_vec[i].error_uncorrectable = true;
+ }
+
+ /* Clearing interrupts for processed error vectors */
+ elm_write_reg(info, ELM_IRQSTATUS, BIT(i));
+
+ /* Disable page mode */
+ elm_configure_page_mode(info, i, false);
+ }
+ }
+}
+
+/**
+ * elm_decode_bch_error_page - Locate error position
+ * @dev: device pointer
+ * @ecc_calc: calculated ECC bytes from GPMC
+ * @err_vec: elm error vectors
+ *
+ * Called with one or more error reported vectors & vectors with
+ * error reported is updated in err_vec[].error_reported
+ */
+void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc,
+ struct elm_errorvec *err_vec)
+{
+ struct elm_info *info = dev_get_drvdata(dev);
+ u32 reg_val;
+
+ /* Enable page mode interrupt */
+ reg_val = elm_read_reg(info, ELM_IRQSTATUS);
+ elm_write_reg(info, ELM_IRQSTATUS, reg_val & INTR_STATUS_PAGE_VALID);
+ elm_write_reg(info, ELM_IRQENABLE, INTR_EN_PAGE_MASK);
+
+ /* Load valid ecc byte to syndrome fragment register */
+ elm_load_syndrome(info, err_vec, ecc_calc);
+
+ /* Enable syndrome processing for which syndrome fragment is updated */
+ elm_start_processing(info, err_vec);
+
+ /* Wait for ELM module to finish locating error correction */
+ wait_for_completion(&info->elm_completion);
+
+ /* Disable page mode interrupt */
+ reg_val = elm_read_reg(info, ELM_IRQENABLE);
+ elm_write_reg(info, ELM_IRQENABLE, reg_val & ~INTR_EN_PAGE_MASK);
+ elm_error_correction(info, err_vec);
+}
+EXPORT_SYMBOL(elm_decode_bch_error_page);
+
+static irqreturn_t elm_isr(int this_irq, void *dev_id)
+{
+ u32 reg_val;
+ struct elm_info *info = dev_id;
+
+ reg_val = elm_read_reg(info, ELM_IRQSTATUS);
+
+ /* All error vectors processed */
+ if (reg_val & INTR_STATUS_PAGE_VALID) {
+ elm_write_reg(info, ELM_IRQSTATUS,
+ reg_val & INTR_STATUS_PAGE_VALID);
+ complete(&info->elm_completion);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static int elm_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct resource *res, *irq;
+ struct elm_info *info;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ info->dev = &pdev->dev;
+
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "no irq resource defined\n");
+ return -ENODEV;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ return -ENODEV;
+ }
+
+ info->elm_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!info->elm_base)
+ return -EADDRNOTAVAIL;
+
+ ret = devm_request_irq(&pdev->dev, irq->start, elm_isr, 0,
+ pdev->name, info);
+ if (ret) {
+ dev_err(&pdev->dev, "failure requesting irq %i\n", irq->start);
+ return ret;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+ if (pm_runtime_get_sync(&pdev->dev)) {
+ ret = -EINVAL;
+ pm_runtime_disable(&pdev->dev);
+ dev_err(&pdev->dev, "can't enable clock\n");
+ return ret;
+ }
+
+ init_completion(&info->elm_completion);
+ INIT_LIST_HEAD(&info->list);
+ list_add(&info->list, &elm_devices);
+ platform_set_drvdata(pdev, info);
+ return ret;
+}
+
+static int elm_remove(struct platform_device *pdev)
+{
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id elm_of_match[] = {
+ { .compatible = "ti,am3352-elm" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, elm_of_match);
+#endif
+
+static struct platform_driver elm_driver = {
+ .driver = {
+ .name = "elm",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(elm_of_match),
+ },
+ .probe = elm_probe,
+ .remove = elm_remove,
+};
+
+module_platform_driver(elm_driver);
+
+MODULE_DESCRIPTION("ELM driver for BCH error correction");
+MODULE_AUTHOR("Texas Instruments");
+MODULE_ALIAS("platform: elm");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 4eeeb2d7f6ea..5b6b0728be21 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -565,6 +565,96 @@ time_out:
return ret;
}
+static int m25p80_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ struct m25p *flash = mtd_to_m25p(mtd);
+ uint32_t offset = ofs;
+ uint8_t status_old, status_new;
+ int res = 0;
+
+ mutex_lock(&flash->lock);
+ /* Wait until finished previous command */
+ if (wait_till_ready(flash)) {
+ res = 1;
+ goto err;
+ }
+
+ status_old = read_sr(flash);
+
+ if (offset < flash->mtd.size-(flash->mtd.size/2))
+ status_new = status_old | SR_BP2 | SR_BP1 | SR_BP0;
+ else if (offset < flash->mtd.size-(flash->mtd.size/4))
+ status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1;
+ else if (offset < flash->mtd.size-(flash->mtd.size/8))
+ status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0;
+ else if (offset < flash->mtd.size-(flash->mtd.size/16))
+ status_new = (status_old & ~(SR_BP0|SR_BP1)) | SR_BP2;
+ else if (offset < flash->mtd.size-(flash->mtd.size/32))
+ status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0;
+ else if (offset < flash->mtd.size-(flash->mtd.size/64))
+ status_new = (status_old & ~(SR_BP2|SR_BP0)) | SR_BP1;
+ else
+ status_new = (status_old & ~(SR_BP2|SR_BP1)) | SR_BP0;
+
+ /* Only modify protection if it will not unlock other areas */
+ if ((status_new&(SR_BP2|SR_BP1|SR_BP0)) >
+ (status_old&(SR_BP2|SR_BP1|SR_BP0))) {
+ write_enable(flash);
+ if (write_sr(flash, status_new) < 0) {
+ res = 1;
+ goto err;
+ }
+ }
+
+err: mutex_unlock(&flash->lock);
+ return res;
+}
+
+static int m25p80_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ struct m25p *flash = mtd_to_m25p(mtd);
+ uint32_t offset = ofs;
+ uint8_t status_old, status_new;
+ int res = 0;
+
+ mutex_lock(&flash->lock);
+ /* Wait until finished previous command */
+ if (wait_till_ready(flash)) {
+ res = 1;
+ goto err;
+ }
+
+ status_old = read_sr(flash);
+
+ if (offset+len > flash->mtd.size-(flash->mtd.size/64))
+ status_new = status_old & ~(SR_BP2|SR_BP1|SR_BP0);
+ else if (offset+len > flash->mtd.size-(flash->mtd.size/32))
+ status_new = (status_old & ~(SR_BP2|SR_BP1)) | SR_BP0;
+ else if (offset+len > flash->mtd.size-(flash->mtd.size/16))
+ status_new = (status_old & ~(SR_BP2|SR_BP0)) | SR_BP1;
+ else if (offset+len > flash->mtd.size-(flash->mtd.size/8))
+ status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0;
+ else if (offset+len > flash->mtd.size-(flash->mtd.size/4))
+ status_new = (status_old & ~(SR_BP0|SR_BP1)) | SR_BP2;
+ else if (offset+len > flash->mtd.size-(flash->mtd.size/2))
+ status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0;
+ else
+ status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1;
+
+ /* Only modify protection if it will not lock other areas */
+ if ((status_new&(SR_BP2|SR_BP1|SR_BP0)) <
+ (status_old&(SR_BP2|SR_BP1|SR_BP0))) {
+ write_enable(flash);
+ if (write_sr(flash, status_new) < 0) {
+ res = 1;
+ goto err;
+ }
+ }
+
+err: mutex_unlock(&flash->lock);
+ return res;
+}
+
/****************************************************************************/
/*
@@ -642,6 +732,10 @@ static const struct spi_device_id m25p_ids[] = {
/* Everspin */
{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2) },
+ /* GigaDevice */
+ { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },
+ { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
+
/* Intel/Numonyx -- xxxs33b */
{ "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) },
{ "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) },
@@ -899,6 +993,12 @@ static int m25p_probe(struct spi_device *spi)
flash->mtd._erase = m25p80_erase;
flash->mtd._read = m25p80_read;
+ /* flash protection support for STmicro chips */
+ if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
+ flash->mtd._lock = m25p80_lock;
+ flash->mtd._unlock = m25p80_unlock;
+ }
+
/* sst flash chips use AAI word program */
if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST)
flash->mtd._write = sst_write;
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 62ba82c396c2..3ed17c4d4358 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -429,7 +429,7 @@ config MTD_GPIO_ADDR
config MTD_UCLINUX
bool "Generic uClinux RAM/ROM filesystem support"
- depends on MTD_RAM=y && (!MMU || COLDFIRE)
+ depends on (MTD_RAM=y || MTD_ROM=y) && (!MMU || COLDFIRE)
help
Map driver to support image based filesystems for uClinux.
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index 7901d72c9242..363939dfad05 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -68,9 +68,6 @@ static int of_flash_remove(struct platform_device *dev)
kfree(info->list[i].res);
}
}
-
- kfree(info);
-
return 0;
}
@@ -199,8 +196,9 @@ static int of_flash_probe(struct platform_device *dev)
map_indirect = of_property_read_bool(dp, "no-unaligned-direct-access");
err = -ENOMEM;
- info = kzalloc(sizeof(struct of_flash) +
- sizeof(struct of_flash_list) * count, GFP_KERNEL);
+ info = devm_kzalloc(&dev->dev,
+ sizeof(struct of_flash) +
+ sizeof(struct of_flash_list) * count, GFP_KERNEL);
if (!info)
goto err_flash_remove;
@@ -241,6 +239,7 @@ static int of_flash_probe(struct platform_device *dev)
info->list[i].map.phys = res.start;
info->list[i].map.size = res_size;
info->list[i].map.bankwidth = be32_to_cpup(width);
+ info->list[i].map.device_node = dp;
err = -ENOMEM;
info->list[i].map.virt = ioremap(info->list[i].map.phys,
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index 299bf88a6f41..c1af83db5202 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -23,12 +23,26 @@
/****************************************************************************/
+#ifdef CONFIG_MTD_ROM
+#define MAP_NAME "rom"
+#else
+#define MAP_NAME "ram"
+#endif
+
+/*
+ * Blackfin uses uclinux_ram_map during startup, so it must not be static.
+ * Provide a dummy declaration to make sparse happy.
+ */
+extern struct map_info uclinux_ram_map;
+
struct map_info uclinux_ram_map = {
- .name = "RAM",
- .phys = (unsigned long)__bss_stop,
+ .name = MAP_NAME,
.size = 0,
};
+static unsigned long physaddr = -1;
+module_param(physaddr, ulong, S_IRUGO);
+
static struct mtd_info *uclinux_ram_mtdinfo;
/****************************************************************************/
@@ -60,11 +74,17 @@ static int __init uclinux_mtd_init(void)
struct map_info *mapp;
mapp = &uclinux_ram_map;
+
+ if (physaddr == -1)
+ mapp->phys = (resource_size_t)__bss_stop;
+ else
+ mapp->phys = physaddr;
+
if (!mapp->size)
mapp->size = PAGE_ALIGN(ntohl(*((unsigned long *)(mapp->phys + 8))));
mapp->bankwidth = 4;
- printk("uclinux[mtd]: RAM probe address=0x%x size=0x%x\n",
+ printk("uclinux[mtd]: probe address=0x%x size=0x%x\n",
(int) mapp->phys, (int) mapp->size);
/*
@@ -82,7 +102,7 @@ static int __init uclinux_mtd_init(void)
simple_map_init(mapp);
- mtd = do_map_probe("map_ram", mapp);
+ mtd = do_map_probe("map_" MAP_NAME, mapp);
if (!mtd) {
printk("uclinux[mtd]: failed to find a mapping?\n");
return(-ENXIO);
@@ -118,6 +138,6 @@ module_exit(uclinux_mtd_cleanup);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>");
-MODULE_DESCRIPTION("Generic RAM based MTD for uClinux");
+MODULE_DESCRIPTION("Generic MTD for uClinux");
/****************************************************************************/
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index c516a9408087..ffcbcca2fd2d 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -101,6 +101,8 @@ struct atmel_nand_host {
u8 pmecc_corr_cap;
u16 pmecc_sector_size;
u32 pmecc_lookup_table_offset;
+ u32 pmecc_lookup_table_offset_512;
+ u32 pmecc_lookup_table_offset_1024;
int pmecc_bytes_per_sector;
int pmecc_sector_number;
@@ -908,6 +910,84 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
}
+/*
+ * Get ECC requirement in ONFI parameters, returns -1 if ONFI
+ * parameters is not supported.
+ * return 0 if success to get the ECC requirement.
+ */
+static int get_onfi_ecc_param(struct nand_chip *chip,
+ int *ecc_bits, int *sector_size)
+{
+ *ecc_bits = *sector_size = 0;
+
+ if (chip->onfi_params.ecc_bits == 0xff)
+ /* TODO: the sector_size and ecc_bits need to be find in
+ * extended ecc parameter, currently we don't support it.
+ */
+ return -1;
+
+ *ecc_bits = chip->onfi_params.ecc_bits;
+
+ /* The default sector size (ecc codeword size) is 512 */
+ *sector_size = 512;
+
+ return 0;
+}
+
+/*
+ * Get ecc requirement from ONFI parameters ecc requirement.
+ * If pmecc-cap, pmecc-sector-size in DTS are not specified, this function
+ * will set them according to ONFI ecc requirement. Otherwise, use the
+ * value in DTS file.
+ * return 0 if success. otherwise return error code.
+ */
+static int pmecc_choose_ecc(struct atmel_nand_host *host,
+ int *cap, int *sector_size)
+{
+ /* Get ECC requirement from ONFI parameters */
+ *cap = *sector_size = 0;
+ if (host->nand_chip.onfi_version) {
+ if (!get_onfi_ecc_param(&host->nand_chip, cap, sector_size))
+ dev_info(host->dev, "ONFI params, minimum required ECC: %d bits in %d bytes\n",
+ *cap, *sector_size);
+ else
+ dev_info(host->dev, "NAND chip ECC reqirement is in Extended ONFI parameter, we don't support yet.\n");
+ } else {
+ dev_info(host->dev, "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes");
+ }
+ if (*cap == 0 && *sector_size == 0) {
+ *cap = 2;
+ *sector_size = 512;
+ }
+
+ /* If dts file doesn't specify then use the one in ONFI parameters */
+ if (host->pmecc_corr_cap == 0) {
+ /* use the most fitable ecc bits (the near bigger one ) */
+ if (*cap <= 2)
+ host->pmecc_corr_cap = 2;
+ else if (*cap <= 4)
+ host->pmecc_corr_cap = 4;
+ else if (*cap < 8)
+ host->pmecc_corr_cap = 8;
+ else if (*cap < 12)
+ host->pmecc_corr_cap = 12;
+ else if (*cap < 24)
+ host->pmecc_corr_cap = 24;
+ else
+ return -EINVAL;
+ }
+ if (host->pmecc_sector_size == 0) {
+ /* use the most fitable sector size (the near smaller one ) */
+ if (*sector_size >= 1024)
+ host->pmecc_sector_size = 1024;
+ else if (*sector_size >= 512)
+ host->pmecc_sector_size = 512;
+ else
+ return -EINVAL;
+ }
+ return 0;
+}
+
static int __init atmel_pmecc_nand_init_params(struct platform_device *pdev,
struct atmel_nand_host *host)
{
@@ -916,8 +996,22 @@ static int __init atmel_pmecc_nand_init_params(struct platform_device *pdev,
struct resource *regs, *regs_pmerr, *regs_rom;
int cap, sector_size, err_no;
+ err_no = pmecc_choose_ecc(host, &cap, &sector_size);
+ if (err_no) {
+ dev_err(host->dev, "The NAND flash's ECC requirement are not support!");
+ return err_no;
+ }
+
+ if (cap != host->pmecc_corr_cap ||
+ sector_size != host->pmecc_sector_size)
+ dev_info(host->dev, "WARNING: Be Caution! Using different PMECC parameters from Nand ONFI ECC reqirement.\n");
+
cap = host->pmecc_corr_cap;
sector_size = host->pmecc_sector_size;
+ host->pmecc_lookup_table_offset = (sector_size == 512) ?
+ host->pmecc_lookup_table_offset_512 :
+ host->pmecc_lookup_table_offset_1024;
+
dev_info(host->dev, "Initialize PMECC params, cap: %d, sector: %d\n",
cap, sector_size);
@@ -1215,7 +1309,7 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
static int atmel_of_init_port(struct atmel_nand_host *host,
struct device_node *np)
{
- u32 val, table_offset;
+ u32 val;
u32 offset[2];
int ecc_mode;
struct atmel_nand_data *board = &host->board;
@@ -1259,42 +1353,41 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
/* use PMECC, get correction capability, sector size and lookup
* table offset.
+ * If correction bits and sector size are not specified, then find
+ * them from NAND ONFI parameters.
*/
- if (of_property_read_u32(np, "atmel,pmecc-cap", &val) != 0) {
- dev_err(host->dev, "Cannot decide PMECC Capability\n");
- return -EINVAL;
- } else if ((val != 2) && (val != 4) && (val != 8) && (val != 12) &&
- (val != 24)) {
- dev_err(host->dev,
- "Unsupported PMECC correction capability: %d; should be 2, 4, 8, 12 or 24\n",
- val);
- return -EINVAL;
+ if (of_property_read_u32(np, "atmel,pmecc-cap", &val) == 0) {
+ if ((val != 2) && (val != 4) && (val != 8) && (val != 12) &&
+ (val != 24)) {
+ dev_err(host->dev,
+ "Unsupported PMECC correction capability: %d; should be 2, 4, 8, 12 or 24\n",
+ val);
+ return -EINVAL;
+ }
+ host->pmecc_corr_cap = (u8)val;
}
- host->pmecc_corr_cap = (u8)val;
- if (of_property_read_u32(np, "atmel,pmecc-sector-size", &val) != 0) {
- dev_err(host->dev, "Cannot decide PMECC Sector Size\n");
- return -EINVAL;
- } else if ((val != 512) && (val != 1024)) {
- dev_err(host->dev,
- "Unsupported PMECC sector size: %d; should be 512 or 1024 bytes\n",
- val);
- return -EINVAL;
+ if (of_property_read_u32(np, "atmel,pmecc-sector-size", &val) == 0) {
+ if ((val != 512) && (val != 1024)) {
+ dev_err(host->dev,
+ "Unsupported PMECC sector size: %d; should be 512 or 1024 bytes\n",
+ val);
+ return -EINVAL;
+ }
+ host->pmecc_sector_size = (u16)val;
}
- host->pmecc_sector_size = (u16)val;
if (of_property_read_u32_array(np, "atmel,pmecc-lookup-table-offset",
offset, 2) != 0) {
dev_err(host->dev, "Cannot get PMECC lookup table offset\n");
return -EINVAL;
}
- table_offset = host->pmecc_sector_size == 512 ? offset[0] : offset[1];
-
- if (!table_offset) {
+ if (!offset[0] && !offset[1]) {
dev_err(host->dev, "Invalid PMECC lookup table offset\n");
return -EINVAL;
}
- host->pmecc_lookup_table_offset = table_offset;
+ host->pmecc_lookup_table_offset_512 = offset[0];
+ host->pmecc_lookup_table_offset_1024 = offset[1];
return 0;
}
diff --git a/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h b/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h
index 0bdb2ce4da75..c005a62330b1 100644
--- a/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h
+++ b/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h
@@ -1,6 +1,10 @@
#ifndef __BCM47XXNFLASH_H
#define __BCM47XXNFLASH_H
+#ifndef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#endif
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
diff --git a/drivers/mtd/nand/bcm47xxnflash/main.c b/drivers/mtd/nand/bcm47xxnflash/main.c
index 8363a9a5fa3f..7bae569fdc79 100644
--- a/drivers/mtd/nand/bcm47xxnflash/main.c
+++ b/drivers/mtd/nand/bcm47xxnflash/main.c
@@ -9,14 +9,14 @@
*
*/
+#include "bcm47xxnflash.h"
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
-#include "bcm47xxnflash.h"
-
MODULE_DESCRIPTION("NAND flash driver for BCMA bus");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Rafał Miłecki");
@@ -77,6 +77,7 @@ static int bcm47xxnflash_remove(struct platform_device *pdev)
}
static struct platform_driver bcm47xxnflash_driver = {
+ .probe = bcm47xxnflash_probe,
.remove = bcm47xxnflash_remove,
.driver = {
.name = "bcma_nflash",
@@ -88,13 +89,10 @@ static int __init bcm47xxnflash_init(void)
{
int err;
- /*
- * Platform device "bcma_nflash" exists on SoCs and is registered very
- * early, it won't be added during runtime (use platform_driver_probe).
- */
- err = platform_driver_probe(&bcm47xxnflash_driver, bcm47xxnflash_probe);
+ err = platform_driver_register(&bcm47xxnflash_driver);
if (err)
- pr_err("Failed to register serial flash driver: %d\n", err);
+ pr_err("Failed to register bcm47xx nand flash driver: %d\n",
+ err);
return err;
}
diff --git a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
index 595de4012e71..b2ab373c9eef 100644
--- a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
+++ b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
@@ -9,13 +9,13 @@
*
*/
+#include "bcm47xxnflash.h"
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/bcma/bcma.h>
-#include "bcm47xxnflash.h"
-
/* Broadcom uses 1'000'000 but it seems to be too many. Tests on WNDR4500 has
* shown ~1000 retries as maxiumum. */
#define NFLASH_READY_RETRIES 10000
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index feae55c7b880..94e17af8e450 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -606,7 +606,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
if (pdev->id < 0 || pdev->id > 3)
return -ENODEV;
- info = kzalloc(sizeof(*info), GFP_KERNEL);
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info) {
dev_err(&pdev->dev, "unable to allocate memory\n");
ret = -ENOMEM;
@@ -623,11 +623,11 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
goto err_nomem;
}
- vaddr = ioremap(res1->start, resource_size(res1));
- base = ioremap(res2->start, resource_size(res2));
+ vaddr = devm_request_and_ioremap(&pdev->dev, res1);
+ base = devm_request_and_ioremap(&pdev->dev, res2);
if (!vaddr || !base) {
dev_err(&pdev->dev, "ioremap failed\n");
- ret = -EINVAL;
+ ret = -EADDRNOTAVAIL;
goto err_ioremap;
}
@@ -717,7 +717,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
}
info->chip.ecc.mode = ecc_mode;
- info->clk = clk_get(&pdev->dev, "aemif");
+ info->clk = devm_clk_get(&pdev->dev, "aemif");
if (IS_ERR(info->clk)) {
ret = PTR_ERR(info->clk);
dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
@@ -845,8 +845,6 @@ err_timing:
clk_disable_unprepare(info->clk);
err_clk_enable:
- clk_put(info->clk);
-
spin_lock_irq(&davinci_nand_lock);
if (ecc_mode == NAND_ECC_HW_SYNDROME)
ecc4_busy = false;
@@ -855,13 +853,7 @@ err_clk_enable:
err_ecc:
err_clk:
err_ioremap:
- if (base)
- iounmap(base);
- if (vaddr)
- iounmap(vaddr);
-
err_nomem:
- kfree(info);
return ret;
}
@@ -874,15 +866,9 @@ static int __exit nand_davinci_remove(struct platform_device *pdev)
ecc4_busy = false;
spin_unlock_irq(&davinci_nand_lock);
- iounmap(info->base);
- iounmap(info->vaddr);
-
nand_release(&info->mtd);
clk_disable_unprepare(info->clk);
- clk_put(info->clk);
-
- kfree(info);
return 0;
}
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index ad6222627fed..f1f7f12ab501 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -176,8 +176,8 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
ifc_nand_ctrl->page = page_addr;
/* Program ROW0/COL0 */
- out_be32(&ifc->ifc_nand.row0, page_addr);
- out_be32(&ifc->ifc_nand.col0, (oob ? IFC_NAND_COL_MS : 0) | column);
+ iowrite32be(page_addr, &ifc->ifc_nand.row0);
+ iowrite32be((oob ? IFC_NAND_COL_MS : 0) | column, &ifc->ifc_nand.col0);
buf_num = page_addr & priv->bufnum_mask;
@@ -239,18 +239,19 @@ static void fsl_ifc_run_command(struct mtd_info *mtd)
int i;
/* set the chip select for NAND Transaction */
- out_be32(&ifc->ifc_nand.nand_csel, priv->bank << IFC_NAND_CSEL_SHIFT);
+ iowrite32be(priv->bank << IFC_NAND_CSEL_SHIFT,
+ &ifc->ifc_nand.nand_csel);
dev_vdbg(priv->dev,
"%s: fir0=%08x fcr0=%08x\n",
__func__,
- in_be32(&ifc->ifc_nand.nand_fir0),
- in_be32(&ifc->ifc_nand.nand_fcr0));
+ ioread32be(&ifc->ifc_nand.nand_fir0),
+ ioread32be(&ifc->ifc_nand.nand_fcr0));
ctrl->nand_stat = 0;
/* start read/write seq */
- out_be32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT);
+ iowrite32be(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt);
/* wait for command complete flag or timeout */
wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat,
@@ -273,7 +274,7 @@ static void fsl_ifc_run_command(struct mtd_info *mtd)
int sector_end = sector + chip->ecc.steps - 1;
for (i = sector / 4; i <= sector_end / 4; i++)
- eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]);
+ eccstat[i] = ioread32be(&ifc->ifc_nand.nand_eccstat[i]);
for (i = sector; i <= sector_end; i++) {
errors = check_read_ecc(mtd, ctrl, eccstat, i);
@@ -313,31 +314,33 @@ static void fsl_ifc_do_read(struct nand_chip *chip,
/* Program FIR/IFC_NAND_FCR0 for Small/Large page */
if (mtd->writesize > 512) {
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
- (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
- (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
-
- out_be32(&ifc->ifc_nand.nand_fcr0,
- (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
- (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
+ iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ iowrite32be(0x0, &ifc->ifc_nand.nand_fir1);
+
+ iowrite32be((NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
+ (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT),
+ &ifc->ifc_nand.nand_fcr0);
} else {
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
- (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
+ iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ iowrite32be(0x0, &ifc->ifc_nand.nand_fir1);
if (oob)
- out_be32(&ifc->ifc_nand.nand_fcr0,
- NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT);
+ iowrite32be(NAND_CMD_READOOB <<
+ IFC_NAND_FCR0_CMD0_SHIFT,
+ &ifc->ifc_nand.nand_fcr0);
else
- out_be32(&ifc->ifc_nand.nand_fcr0,
- NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
+ iowrite32be(NAND_CMD_READ0 <<
+ IFC_NAND_FCR0_CMD0_SHIFT,
+ &ifc->ifc_nand.nand_fcr0);
}
}
@@ -357,7 +360,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
switch (command) {
/* READ0 read the entire buffer to use hardware ECC. */
case NAND_CMD_READ0:
- out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+ iowrite32be(0, &ifc->ifc_nand.nand_fbcr);
set_addr(mtd, 0, page_addr, 0);
ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
@@ -372,7 +375,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* READOOB reads only the OOB because no ECC is performed. */
case NAND_CMD_READOOB:
- out_be32(&ifc->ifc_nand.nand_fbcr, mtd->oobsize - column);
+ iowrite32be(mtd->oobsize - column, &ifc->ifc_nand.nand_fbcr);
set_addr(mtd, column, page_addr, 1);
ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
@@ -388,19 +391,19 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
if (command == NAND_CMD_PARAM)
timing = IFC_FIR_OP_RBCD;
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
- (timing << IFC_NAND_FIR0_OP2_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fcr0,
- command << IFC_NAND_FCR0_CMD0_SHIFT);
- out_be32(&ifc->ifc_nand.row3, column);
+ iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
+ (timing << IFC_NAND_FIR0_OP2_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ iowrite32be(command << IFC_NAND_FCR0_CMD0_SHIFT,
+ &ifc->ifc_nand.nand_fcr0);
+ iowrite32be(column, &ifc->ifc_nand.row3);
/*
* although currently it's 8 bytes for READID, we always read
* the maximum 256 bytes(for PARAM)
*/
- out_be32(&ifc->ifc_nand.nand_fbcr, 256);
+ iowrite32be(256, &ifc->ifc_nand.nand_fbcr);
ifc_nand_ctrl->read_bytes = 256;
set_addr(mtd, 0, 0, 0);
@@ -415,16 +418,16 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* ERASE2 uses the block and page address from ERASE1 */
case NAND_CMD_ERASE2:
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT));
+ iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
- out_be32(&ifc->ifc_nand.nand_fcr0,
- (NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) |
- (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT));
+ iowrite32be((NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) |
+ (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT),
+ &ifc->ifc_nand.nand_fcr0);
- out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+ iowrite32be(0, &ifc->ifc_nand.nand_fbcr);
ifc_nand_ctrl->read_bytes = 0;
fsl_ifc_run_command(mtd);
return;
@@ -440,26 +443,28 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
(NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) |
(NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT);
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
- (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) |
- (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT));
+ iowrite32be(
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
} else {
nand_fcr0 = ((NAND_CMD_PAGEPROG <<
IFC_NAND_FCR0_CMD1_SHIFT) |
(NAND_CMD_SEQIN <<
IFC_NAND_FCR0_CMD2_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) |
- (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
- (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fir1,
- (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT));
+ iowrite32be(
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ iowrite32be(IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT,
+ &ifc->ifc_nand.nand_fir1);
if (column >= mtd->writesize)
nand_fcr0 |=
@@ -474,7 +479,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
column -= mtd->writesize;
ifc_nand_ctrl->oob = 1;
}
- out_be32(&ifc->ifc_nand.nand_fcr0, nand_fcr0);
+ iowrite32be(nand_fcr0, &ifc->ifc_nand.nand_fcr0);
set_addr(mtd, column, page_addr, ifc_nand_ctrl->oob);
return;
}
@@ -482,10 +487,11 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
case NAND_CMD_PAGEPROG: {
if (ifc_nand_ctrl->oob) {
- out_be32(&ifc->ifc_nand.nand_fbcr,
- ifc_nand_ctrl->index - ifc_nand_ctrl->column);
+ iowrite32be(ifc_nand_ctrl->index -
+ ifc_nand_ctrl->column,
+ &ifc->ifc_nand.nand_fbcr);
} else {
- out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+ iowrite32be(0, &ifc->ifc_nand.nand_fbcr);
}
fsl_ifc_run_command(mtd);
@@ -493,12 +499,12 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
}
case NAND_CMD_STATUS:
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fcr0,
- NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT);
- out_be32(&ifc->ifc_nand.nand_fbcr, 1);
+ iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ iowrite32be(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT,
+ &ifc->ifc_nand.nand_fcr0);
+ iowrite32be(1, &ifc->ifc_nand.nand_fbcr);
set_addr(mtd, 0, 0, 0);
ifc_nand_ctrl->read_bytes = 1;
@@ -512,10 +518,10 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
return;
case NAND_CMD_RESET:
- out_be32(&ifc->ifc_nand.nand_fir0,
- IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT);
- out_be32(&ifc->ifc_nand.nand_fcr0,
- NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT);
+ iowrite32be(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT,
+ &ifc->ifc_nand.nand_fir0);
+ iowrite32be(NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT,
+ &ifc->ifc_nand.nand_fcr0);
fsl_ifc_run_command(mtd);
return;
@@ -639,18 +645,18 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
u32 nand_fsr;
/* Use READ_STATUS command, but wait for the device to be ready */
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fcr0, NAND_CMD_STATUS <<
- IFC_NAND_FCR0_CMD0_SHIFT);
- out_be32(&ifc->ifc_nand.nand_fbcr, 1);
+ iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ iowrite32be(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT,
+ &ifc->ifc_nand.nand_fcr0);
+ iowrite32be(1, &ifc->ifc_nand.nand_fbcr);
set_addr(mtd, 0, 0, 0);
ifc_nand_ctrl->read_bytes = 1;
fsl_ifc_run_command(mtd);
- nand_fsr = in_be32(&ifc->ifc_nand.nand_fsr);
+ nand_fsr = ioread32be(&ifc->ifc_nand.nand_fsr);
/*
* The chip always seems to report that it is
@@ -744,34 +750,34 @@ static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
uint32_t cs = priv->bank;
/* Save CSOR and CSOR_ext */
- csor = in_be32(&ifc->csor_cs[cs].csor);
- csor_ext = in_be32(&ifc->csor_cs[cs].csor_ext);
+ csor = ioread32be(&ifc->csor_cs[cs].csor);
+ csor_ext = ioread32be(&ifc->csor_cs[cs].csor_ext);
/* chage PageSize 8K and SpareSize 1K*/
csor_8k = (csor & ~(CSOR_NAND_PGS_MASK)) | 0x0018C000;
- out_be32(&ifc->csor_cs[cs].csor, csor_8k);
- out_be32(&ifc->csor_cs[cs].csor_ext, 0x0000400);
+ iowrite32be(csor_8k, &ifc->csor_cs[cs].csor);
+ iowrite32be(0x0000400, &ifc->csor_cs[cs].csor_ext);
/* READID */
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fcr0,
- NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT);
- out_be32(&ifc->ifc_nand.row3, 0x0);
+ iowrite32be((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ iowrite32be(NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT,
+ &ifc->ifc_nand.nand_fcr0);
+ iowrite32be(0x0, &ifc->ifc_nand.row3);
- out_be32(&ifc->ifc_nand.nand_fbcr, 0x0);
+ iowrite32be(0x0, &ifc->ifc_nand.nand_fbcr);
/* Program ROW0/COL0 */
- out_be32(&ifc->ifc_nand.row0, 0x0);
- out_be32(&ifc->ifc_nand.col0, 0x0);
+ iowrite32be(0x0, &ifc->ifc_nand.row0);
+ iowrite32be(0x0, &ifc->ifc_nand.col0);
/* set the chip select for NAND Transaction */
- out_be32(&ifc->ifc_nand.nand_csel, cs << IFC_NAND_CSEL_SHIFT);
+ iowrite32be(cs << IFC_NAND_CSEL_SHIFT, &ifc->ifc_nand.nand_csel);
/* start read seq */
- out_be32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT);
+ iowrite32be(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt);
/* wait for command complete flag or timeout */
wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat,
@@ -781,8 +787,8 @@ static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
printk(KERN_ERR "fsl-ifc: Failed to Initialise SRAM\n");
/* Restore CSOR and CSOR_ext */
- out_be32(&ifc->csor_cs[cs].csor, csor);
- out_be32(&ifc->csor_cs[cs].csor_ext, csor_ext);
+ iowrite32be(csor, &ifc->csor_cs[cs].csor);
+ iowrite32be(csor_ext, &ifc->csor_cs[cs].csor_ext);
}
static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
@@ -799,7 +805,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
/* fill in nand_chip structure */
/* set up function call table */
- if ((in_be32(&ifc->cspr_cs[priv->bank].cspr)) & CSPR_PORT_SIZE_16)
+ if ((ioread32be(&ifc->cspr_cs[priv->bank].cspr)) & CSPR_PORT_SIZE_16)
chip->read_byte = fsl_ifc_read_byte16;
else
chip->read_byte = fsl_ifc_read_byte;
@@ -813,13 +819,13 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
chip->bbt_td = &bbt_main_descr;
chip->bbt_md = &bbt_mirror_descr;
- out_be32(&ifc->ifc_nand.ncfgr, 0x0);
+ iowrite32be(0x0, &ifc->ifc_nand.ncfgr);
/* set up nand options */
chip->bbt_options = NAND_BBT_USE_FLASH;
- if (in_be32(&ifc->cspr_cs[priv->bank].cspr) & CSPR_PORT_SIZE_16) {
+ if (ioread32be(&ifc->cspr_cs[priv->bank].cspr) & CSPR_PORT_SIZE_16) {
chip->read_byte = fsl_ifc_read_byte16;
chip->options |= NAND_BUSWIDTH_16;
} else {
@@ -832,7 +838,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
chip->ecc.read_page = fsl_ifc_read_page;
chip->ecc.write_page = fsl_ifc_write_page;
- csor = in_be32(&ifc->csor_cs[priv->bank].csor);
+ csor = ioread32be(&ifc->csor_cs[priv->bank].csor);
/* Hardware generates ECC per 512 Bytes */
chip->ecc.size = 512;
@@ -884,7 +890,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
chip->ecc.mode = NAND_ECC_SOFT;
}
- ver = in_be32(&ifc->ifc_rev);
+ ver = ioread32be(&ifc->ifc_rev);
if (ver == FSL_IFC_V1_1_0)
fsl_ifc_sram_init(priv);
@@ -910,7 +916,7 @@ static int fsl_ifc_chip_remove(struct fsl_ifc_mtd *priv)
static int match_bank(struct fsl_ifc_regs __iomem *ifc, int bank,
phys_addr_t addr)
{
- u32 cspr = in_be32(&ifc->cspr_cs[bank].cspr);
+ u32 cspr = ioread32be(&ifc->cspr_cs[bank].cspr);
if (!(cspr & CSPR_V))
return 0;
@@ -997,17 +1003,16 @@ static int fsl_ifc_nand_probe(struct platform_device *dev)
dev_set_drvdata(priv->dev, priv);
- out_be32(&ifc->ifc_nand.nand_evter_en,
- IFC_NAND_EVTER_EN_OPC_EN |
- IFC_NAND_EVTER_EN_FTOER_EN |
- IFC_NAND_EVTER_EN_WPER_EN);
+ iowrite32be(IFC_NAND_EVTER_EN_OPC_EN |
+ IFC_NAND_EVTER_EN_FTOER_EN |
+ IFC_NAND_EVTER_EN_WPER_EN,
+ &ifc->ifc_nand.nand_evter_en);
/* enable NAND Machine Interrupts */
- out_be32(&ifc->ifc_nand.nand_evter_intr_en,
- IFC_NAND_EVTER_INTR_OPCIR_EN |
- IFC_NAND_EVTER_INTR_FTOERIR_EN |
- IFC_NAND_EVTER_INTR_WPERIR_EN);
-
+ iowrite32be(IFC_NAND_EVTER_INTR_OPCIR_EN |
+ IFC_NAND_EVTER_INTR_FTOERIR_EN |
+ IFC_NAND_EVTER_INTR_WPERIR_EN,
+ &ifc->ifc_nand.nand_evter_intr_en);
priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start);
if (!priv->mtd.name) {
ret = -ENOMEM;
diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
index a0924515c396..588f5374047c 100644
--- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
+++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
@@ -61,6 +61,16 @@
& BM_BCH_FLASH0LAYOUT0_ECC0) \
)
+#define MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14 10
+#define MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14 \
+ (0x1 << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)
+#define BF_BCH_FLASH0LAYOUT0_GF(v, x) \
+ ((GPMI_IS_MX6Q(x) && ((v) == 14)) \
+ ? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14) \
+ & MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14) \
+ : 0 \
+ )
+
#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0
#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \
(0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
@@ -93,6 +103,16 @@
& BM_BCH_FLASH0LAYOUT1_ECCN) \
)
+#define MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14 10
+#define MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14 \
+ (0x1 << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)
+#define BF_BCH_FLASH0LAYOUT1_GF(v, x) \
+ ((GPMI_IS_MX6Q(x) && ((v) == 14)) \
+ ? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14) \
+ & MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14) \
+ : 0 \
+ )
+
#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0
#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \
(0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
@@ -103,4 +123,6 @@
? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
: ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
)
+
+#define HW_BCH_VERSION 0x00000160
#endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index d84699c7968e..4f8857fa48a7 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -208,6 +208,11 @@ void gpmi_dump_info(struct gpmi_nand_data *this)
}
/* start to print out the BCH info */
+ pr_err("Show BCH registers :\n");
+ for (i = 0; i <= HW_BCH_VERSION / 0x10 + 1; i++) {
+ reg = readl(r->bch_regs + i * 0x10);
+ pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
+ }
pr_err("BCH Geometry :\n");
pr_err("GF length : %u\n", geo->gf_len);
pr_err("ECC Strength : %u\n", geo->ecc_strength);
@@ -232,6 +237,7 @@ int bch_set_geometry(struct gpmi_nand_data *this)
unsigned int metadata_size;
unsigned int ecc_strength;
unsigned int page_size;
+ unsigned int gf_len;
int ret;
if (common_nfc_set_geometry(this))
@@ -242,6 +248,7 @@ int bch_set_geometry(struct gpmi_nand_data *this)
metadata_size = bch_geo->metadata_size;
ecc_strength = bch_geo->ecc_strength >> 1;
page_size = bch_geo->page_size;
+ gf_len = bch_geo->gf_len;
ret = gpmi_enable_clk(this);
if (ret)
@@ -263,11 +270,13 @@ int bch_set_geometry(struct gpmi_nand_data *this)
writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count)
| BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size)
| BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this)
+ | BF_BCH_FLASH0LAYOUT0_GF(gf_len, this)
| BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size, this),
r->bch_regs + HW_BCH_FLASH0LAYOUT0);
writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size)
| BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this)
+ | BF_BCH_FLASH0LAYOUT1_GF(gf_len, this)
| BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this),
r->bch_regs + HW_BCH_FLASH0LAYOUT1);
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index e9b1c47e3cf9..717881a3d1b8 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -94,6 +94,25 @@ static inline int get_ecc_strength(struct gpmi_nand_data *this)
return round_down(ecc_strength, 2);
}
+static inline bool gpmi_check_ecc(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+
+ /* Do the sanity check. */
+ if (GPMI_IS_MX23(this) || GPMI_IS_MX28(this)) {
+ /* The mx23/mx28 only support the GF13. */
+ if (geo->gf_len == 14)
+ return false;
+
+ if (geo->ecc_strength > MXS_ECC_STRENGTH_MAX)
+ return false;
+ } else if (GPMI_IS_MX6Q(this)) {
+ if (geo->ecc_strength > MX6_ECC_STRENGTH_MAX)
+ return false;
+ }
+ return true;
+}
+
int common_nfc_set_geometry(struct gpmi_nand_data *this)
{
struct bch_geometry *geo = &this->bch_geometry;
@@ -112,17 +131,24 @@ int common_nfc_set_geometry(struct gpmi_nand_data *this)
/* The default for the length of Galois Field. */
geo->gf_len = 13;
- /* The default for chunk size. There is no oobsize greater then 512. */
+ /* The default for chunk size. */
geo->ecc_chunk_size = 512;
- while (geo->ecc_chunk_size < mtd->oobsize)
+ while (geo->ecc_chunk_size < mtd->oobsize) {
geo->ecc_chunk_size *= 2; /* keep C >= O */
+ geo->gf_len = 14;
+ }
geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size;
/* We use the same ECC strength for all chunks. */
geo->ecc_strength = get_ecc_strength(this);
- if (!geo->ecc_strength) {
- pr_err("wrong ECC strength.\n");
+ if (!gpmi_check_ecc(this)) {
+ dev_err(this->dev,
+ "We can not support this nand chip."
+ " Its required ecc strength(%d) is beyond our"
+ " capability(%d).\n", geo->ecc_strength,
+ (GPMI_IS_MX6Q(this) ? MX6_ECC_STRENGTH_MAX
+ : MXS_ECC_STRENGTH_MAX));
return -EINVAL;
}
@@ -920,8 +946,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
dma_addr_t auxiliary_phys;
unsigned int i;
unsigned char *status;
- unsigned int failed;
- unsigned int corrected;
+ unsigned int max_bitflips = 0;
int ret;
pr_debug("page number is : %d\n", page);
@@ -945,35 +970,25 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
payload_virt, payload_phys);
if (ret) {
pr_err("Error in ECC-based read: %d\n", ret);
- goto exit_nfc;
+ return ret;
}
/* handle the block mark swapping */
block_mark_swapping(this, payload_virt, auxiliary_virt);
/* Loop over status bytes, accumulating ECC status. */
- failed = 0;
- corrected = 0;
- status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
+ status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
continue;
if (*status == STATUS_UNCORRECTABLE) {
- failed++;
+ mtd->ecc_stats.failed++;
continue;
}
- corrected += *status;
- }
-
- /*
- * Propagate ECC status to the owning MTD only when failed or
- * corrected times nearly reaches our ECC correction threshold.
- */
- if (failed || corrected >= (nfc_geo->ecc_strength - 1)) {
- mtd->ecc_stats.failed += failed;
- mtd->ecc_stats.corrected += corrected;
+ mtd->ecc_stats.corrected += *status;
+ max_bitflips = max_t(unsigned int, max_bitflips, *status);
}
if (oob_required) {
@@ -995,8 +1010,8 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
this->payload_virt, this->payload_phys,
nfc_geo->payload_size,
payload_virt, payload_phys);
-exit_nfc:
- return ret;
+
+ return max_bitflips;
}
static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
@@ -1668,8 +1683,8 @@ exit_nfc_init:
release_resources(this);
exit_acquire_resources:
platform_set_drvdata(pdev, NULL);
- kfree(this);
dev_err(this->dev, "driver registration failed: %d\n", ret);
+ kfree(this);
return ret;
}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 3d93a5e39090..072947731277 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -284,6 +284,10 @@ extern int gpmi_read_page(struct gpmi_nand_data *,
#define STATUS_ERASED 0xff
#define STATUS_UNCORRECTABLE 0xfe
+/* BCH's bit correction capability. */
+#define MXS_ECC_STRENGTH_MAX 20 /* mx23 and mx28 */
+#define MX6_ECC_STRENGTH_MAX 40
+
/* Use the platform_id to distinguish different Archs. */
#define IS_MX23 0x0
#define IS_MX28 0x1
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 60ac5b98b718..07e5784e5cd3 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -530,12 +530,23 @@ static void send_page_v1(struct mtd_info *mtd, unsigned int ops)
static void send_read_id_v3(struct mxc_nand_host *host)
{
+ struct nand_chip *this = &host->nand;
+
/* Read ID into main buffer */
writel(NFC_ID, NFC_V3_LAUNCH);
wait_op_done(host, true);
memcpy32_fromio(host->data_buf, host->main_area0, 16);
+
+ if (this->options & NAND_BUSWIDTH_16) {
+ /* compress the ID info */
+ host->data_buf[1] = host->data_buf[2];
+ host->data_buf[2] = host->data_buf[4];
+ host->data_buf[3] = host->data_buf[6];
+ host->data_buf[4] = host->data_buf[8];
+ host->data_buf[5] = host->data_buf[10];
+ }
}
/* Request the NANDFC to perform a read of the NAND device ID. */
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 3766682a0289..43214151b882 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -825,13 +825,8 @@ static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip,
static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
- unsigned long timeo = jiffies;
int status, state = chip->state;
-
- if (state == FL_ERASING)
- timeo += (HZ * 400) / 1000;
- else
- timeo += (HZ * 20) / 1000;
+ unsigned long timeo = (state == FL_ERASING ? 400 : 20);
led_trigger_event(nand_led_trigger, LED_FULL);
@@ -849,6 +844,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
if (in_interrupt() || oops_in_progress)
panic_nand_wait(mtd, chip, timeo);
else {
+ timeo = jiffies + msecs_to_jiffies(timeo);
while (time_before(jiffies, timeo)) {
if (chip->dev_ready) {
if (chip->dev_ready(mtd))
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index b7cfe0d37121..053c9a2d47c3 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -55,8 +55,7 @@ struct mtd_info;
#define MODULE_AUTHOR(x) /* x */
#define MODULE_DESCRIPTION(x) /* x */
-#define printk printf
-#define KERN_ERR ""
+#define pr_err printf
#endif
/*
@@ -507,7 +506,7 @@ int __nand_correct_data(unsigned char *buf,
if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
return 1; /* error in ECC data; no action needed */
- printk(KERN_ERR "uncorrectable error : ");
+ pr_err("%s: uncorrectable ECC error", __func__);
return -1;
}
EXPORT_SYMBOL(__nand_correct_data);
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 8f30d385bfa3..891c52a30e6a 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -1468,12 +1468,12 @@ int do_read_error(struct nandsim *ns, int num)
void do_bit_flips(struct nandsim *ns, int num)
{
- if (bitflips && random32() < (1 << 22)) {
+ if (bitflips && prandom_u32() < (1 << 22)) {
int flips = 1;
if (bitflips > 1)
- flips = (random32() % (int) bitflips) + 1;
+ flips = (prandom_u32() % (int) bitflips) + 1;
while (flips--) {
- int pos = random32() % (num * 8);
+ int pos = prandom_u32() % (num * 8);
ns->buf.byte[pos / 8] ^= (1 << (pos % 8));
NS_WARN("read_page: flipping bit %d in page %d "
"reading from %d ecc: corrected=%u failed=%u\n",
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 1d333497cfcb..8e820ddf4e08 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -22,9 +22,12 @@
#include <linux/omap-dma.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#ifdef CONFIG_MTD_NAND_OMAP_BCH
#include <linux/bch.h>
+#include <linux/platform_data/elm.h>
#endif
#include <linux/platform_data/mtd-nand-omap2.h>
@@ -117,6 +120,33 @@
#define OMAP24XX_DMA_GPMC 4
+#define BCH8_MAX_ERROR 8 /* upto 8 bit correctable */
+#define BCH4_MAX_ERROR 4 /* upto 4 bit correctable */
+
+#define SECTOR_BYTES 512
+/* 4 bit padding to make byte aligned, 56 = 52 + 4 */
+#define BCH4_BIT_PAD 4
+#define BCH8_ECC_MAX ((SECTOR_BYTES + BCH8_ECC_OOB_BYTES) * 8)
+#define BCH4_ECC_MAX ((SECTOR_BYTES + BCH4_ECC_OOB_BYTES) * 8)
+
+/* GPMC ecc engine settings for read */
+#define BCH_WRAPMODE_1 1 /* BCH wrap mode 1 */
+#define BCH8R_ECC_SIZE0 0x1a /* ecc_size0 = 26 */
+#define BCH8R_ECC_SIZE1 0x2 /* ecc_size1 = 2 */
+#define BCH4R_ECC_SIZE0 0xd /* ecc_size0 = 13 */
+#define BCH4R_ECC_SIZE1 0x3 /* ecc_size1 = 3 */
+
+/* GPMC ecc engine settings for write */
+#define BCH_WRAPMODE_6 6 /* BCH wrap mode 6 */
+#define BCH_ECC_SIZE0 0x0 /* ecc_size0 = 0, no oob protection */
+#define BCH_ECC_SIZE1 0x20 /* ecc_size1 = 32 */
+
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc,
+ 0xac, 0x6b, 0xff, 0x99, 0x7b};
+static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10};
+#endif
+
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
/* Define some generic bad / good block scan pattern which are used
@@ -156,6 +186,9 @@ struct omap_nand_info {
#ifdef CONFIG_MTD_NAND_OMAP_BCH
struct bch_control *bch;
struct nand_ecclayout ecclayout;
+ bool is_elm_used;
+ struct device *elm_dev;
+ struct device_node *of_node;
#endif
};
@@ -1031,6 +1064,13 @@ static int omap_dev_ready(struct mtd_info *mtd)
* omap3_enable_hwecc_bch - Program OMAP3 GPMC to perform BCH ECC correction
* @mtd: MTD device structure
* @mode: Read/Write mode
+ *
+ * When using BCH, sector size is hardcoded to 512 bytes.
+ * Using wrapping mode 6 both for reading and writing if ELM module not uses
+ * for error correction.
+ * On writing,
+ * eccsize0 = 0 (no additional protected byte in spare area)
+ * eccsize1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
*/
static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
{
@@ -1039,32 +1079,57 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
struct nand_chip *chip = mtd->priv;
- u32 val;
+ u32 val, wr_mode;
+ unsigned int ecc_size1, ecc_size0;
+
+ /* Using wrapping mode 6 for writing */
+ wr_mode = BCH_WRAPMODE_6;
- nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4;
- dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
- nsectors = 1;
/*
- * Program GPMC to perform correction on one 512-byte sector at a time.
- * Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and
- * gives a slight (5%) performance gain (but requires additional code).
+ * ECC engine enabled for valid ecc_size0 nibbles
+ * and disabled for ecc_size1 nibbles.
*/
+ ecc_size0 = BCH_ECC_SIZE0;
+ ecc_size1 = BCH_ECC_SIZE1;
+
+ /* Perform ecc calculation on 512-byte sector */
+ nsectors = 1;
+
+ /* Update number of error correction */
+ nerrors = info->nand.ecc.strength;
+
+ /* Multi sector reading/writing for NAND flash with page size < 4096 */
+ if (info->is_elm_used && (mtd->writesize <= 4096)) {
+ if (mode == NAND_ECC_READ) {
+ /* Using wrapping mode 1 for reading */
+ wr_mode = BCH_WRAPMODE_1;
+
+ /*
+ * ECC engine enabled for ecc_size0 nibbles
+ * and disabled for ecc_size1 nibbles.
+ */
+ ecc_size0 = (nerrors == 8) ?
+ BCH8R_ECC_SIZE0 : BCH4R_ECC_SIZE0;
+ ecc_size1 = (nerrors == 8) ?
+ BCH8R_ECC_SIZE1 : BCH4R_ECC_SIZE1;
+ }
+
+ /* Perform ecc calculation for one page (< 4096) */
+ nsectors = info->nand.ecc.steps;
+ }
writel(ECC1, info->reg.gpmc_ecc_control);
- /*
- * When using BCH, sector size is hardcoded to 512 bytes.
- * Here we are using wrapping mode 6 both for reading and writing, with:
- * size0 = 0 (no additional protected byte in spare area)
- * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
- */
- val = (32 << ECCSIZE1_SHIFT) | (0 << ECCSIZE0_SHIFT);
+ /* Configure ecc size for BCH */
+ val = (ecc_size1 << ECCSIZE1_SHIFT) | (ecc_size0 << ECCSIZE0_SHIFT);
writel(val, info->reg.gpmc_ecc_size_config);
+ dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+
/* BCH configuration */
val = ((1 << 16) | /* enable BCH */
(((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
- (0x06 << 8) | /* wrap mode = 6 */
+ (wr_mode << 8) | /* wrap mode */
(dev_width << 7) | /* bus width */
(((nsectors-1) & 0x7) << 4) | /* number of sectors */
(info->gpmc_cs << 1) | /* ECC CS */
@@ -1072,7 +1137,7 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
writel(val, info->reg.gpmc_ecc_config);
- /* clear ecc and enable bits */
+ /* Clear ecc and enable bits */
writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
}
@@ -1162,6 +1227,298 @@ static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat,
}
/**
+ * omap3_calculate_ecc_bch - Generate bytes of ECC bytes
+ * @mtd: MTD device structure
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc_code: The ecc_code buffer
+ *
+ * Support calculating of BCH4/8 ecc vectors for the page
+ */
+static int omap3_calculate_ecc_bch(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4;
+ int i, eccbchtsel;
+
+ nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+ /*
+ * find BCH scheme used
+ * 0 -> BCH4
+ * 1 -> BCH8
+ */
+ eccbchtsel = ((readl(info->reg.gpmc_ecc_config) >> 12) & 0x3);
+
+ for (i = 0; i < nsectors; i++) {
+
+ /* Read hw-computed remainder */
+ bch_val1 = readl(info->reg.gpmc_bch_result0[i]);
+ bch_val2 = readl(info->reg.gpmc_bch_result1[i]);
+ if (eccbchtsel) {
+ bch_val3 = readl(info->reg.gpmc_bch_result2[i]);
+ bch_val4 = readl(info->reg.gpmc_bch_result3[i]);
+ }
+
+ if (eccbchtsel) {
+ /* BCH8 ecc scheme */
+ *ecc_code++ = (bch_val4 & 0xFF);
+ *ecc_code++ = ((bch_val3 >> 24) & 0xFF);
+ *ecc_code++ = ((bch_val3 >> 16) & 0xFF);
+ *ecc_code++ = ((bch_val3 >> 8) & 0xFF);
+ *ecc_code++ = (bch_val3 & 0xFF);
+ *ecc_code++ = ((bch_val2 >> 24) & 0xFF);
+ *ecc_code++ = ((bch_val2 >> 16) & 0xFF);
+ *ecc_code++ = ((bch_val2 >> 8) & 0xFF);
+ *ecc_code++ = (bch_val2 & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 24) & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 16) & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 8) & 0xFF);
+ *ecc_code++ = (bch_val1 & 0xFF);
+ /*
+ * Setting 14th byte to zero to handle
+ * erased page & maintain compatibility
+ * with RBL
+ */
+ *ecc_code++ = 0x0;
+ } else {
+ /* BCH4 ecc scheme */
+ *ecc_code++ = ((bch_val2 >> 12) & 0xFF);
+ *ecc_code++ = ((bch_val2 >> 4) & 0xFF);
+ *ecc_code++ = ((bch_val2 & 0xF) << 4) |
+ ((bch_val1 >> 28) & 0xF);
+ *ecc_code++ = ((bch_val1 >> 20) & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 12) & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 4) & 0xFF);
+ *ecc_code++ = ((bch_val1 & 0xF) << 4);
+ /*
+ * Setting 8th byte to zero to handle
+ * erased page
+ */
+ *ecc_code++ = 0x0;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * erased_sector_bitflips - count bit flips
+ * @data: data sector buffer
+ * @oob: oob buffer
+ * @info: omap_nand_info
+ *
+ * Check the bit flips in erased page falls below correctable level.
+ * If falls below, report the page as erased with correctable bit
+ * flip, else report as uncorrectable page.
+ */
+static int erased_sector_bitflips(u_char *data, u_char *oob,
+ struct omap_nand_info *info)
+{
+ int flip_bits = 0, i;
+
+ for (i = 0; i < info->nand.ecc.size; i++) {
+ flip_bits += hweight8(~data[i]);
+ if (flip_bits > info->nand.ecc.strength)
+ return 0;
+ }
+
+ for (i = 0; i < info->nand.ecc.bytes - 1; i++) {
+ flip_bits += hweight8(~oob[i]);
+ if (flip_bits > info->nand.ecc.strength)
+ return 0;
+ }
+
+ /*
+ * Bit flips falls in correctable level.
+ * Fill data area with 0xFF
+ */
+ if (flip_bits) {
+ memset(data, 0xFF, info->nand.ecc.size);
+ memset(oob, 0xFF, info->nand.ecc.bytes);
+ }
+
+ return flip_bits;
+}
+
+/**
+ * omap_elm_correct_data - corrects page data area in case error reported
+ * @mtd: MTD device structure
+ * @data: page data
+ * @read_ecc: ecc read from nand flash
+ * @calc_ecc: ecc read from HW ECC registers
+ *
+ * Calculated ecc vector reported as zero in case of non-error pages.
+ * In case of error/erased pages non-zero error vector is reported.
+ * In case of non-zero ecc vector, check read_ecc at fixed offset
+ * (x = 13/7 in case of BCH8/4 == 0) to find page programmed or not.
+ * To handle bit flips in this data, count the number of 0's in
+ * read_ecc[x] and check if it greater than 4. If it is less, it is
+ * programmed page, else erased page.
+ *
+ * 1. If page is erased, check with standard ecc vector (ecc vector
+ * for erased page to find any bit flip). If check fails, bit flip
+ * is present in erased page. Count the bit flips in erased page and
+ * if it falls under correctable level, report page with 0xFF and
+ * update the correctable bit information.
+ * 2. If error is reported on programmed page, update elm error
+ * vector and correct the page with ELM error correction routine.
+ *
+ */
+static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ int eccsteps = info->nand.ecc.steps;
+ int i , j, stat = 0;
+ int eccsize, eccflag, ecc_vector_size;
+ struct elm_errorvec err_vec[ERROR_VECTOR_MAX];
+ u_char *ecc_vec = calc_ecc;
+ u_char *spare_ecc = read_ecc;
+ u_char *erased_ecc_vec;
+ enum bch_ecc type;
+ bool is_error_reported = false;
+
+ /* Initialize elm error vector to zero */
+ memset(err_vec, 0, sizeof(err_vec));
+
+ if (info->nand.ecc.strength == BCH8_MAX_ERROR) {
+ type = BCH8_ECC;
+ erased_ecc_vec = bch8_vector;
+ } else {
+ type = BCH4_ECC;
+ erased_ecc_vec = bch4_vector;
+ }
+
+ ecc_vector_size = info->nand.ecc.bytes;
+
+ /*
+ * Remove extra byte padding for BCH8 RBL
+ * compatibility and erased page handling
+ */
+ eccsize = ecc_vector_size - 1;
+
+ for (i = 0; i < eccsteps ; i++) {
+ eccflag = 0; /* initialize eccflag */
+
+ /*
+ * Check any error reported,
+ * In case of error, non zero ecc reported.
+ */
+
+ for (j = 0; (j < eccsize); j++) {
+ if (calc_ecc[j] != 0) {
+ eccflag = 1; /* non zero ecc, error present */
+ break;
+ }
+ }
+
+ if (eccflag == 1) {
+ /*
+ * Set threshold to minimum of 4, half of ecc.strength/2
+ * to allow max bit flip in byte to 4
+ */
+ unsigned int threshold = min_t(unsigned int, 4,
+ info->nand.ecc.strength / 2);
+
+ /*
+ * Check data area is programmed by counting
+ * number of 0's at fixed offset in spare area.
+ * Checking count of 0's against threshold.
+ * In case programmed page expects at least threshold
+ * zeros in byte.
+ * If zeros are less than threshold for programmed page/
+ * zeros are more than threshold erased page, either
+ * case page reported as uncorrectable.
+ */
+ if (hweight8(~read_ecc[eccsize]) >= threshold) {
+ /*
+ * Update elm error vector as
+ * data area is programmed
+ */
+ err_vec[i].error_reported = true;
+ is_error_reported = true;
+ } else {
+ /* Error reported in erased page */
+ int bitflip_count;
+ u_char *buf = &data[info->nand.ecc.size * i];
+
+ if (memcmp(calc_ecc, erased_ecc_vec, eccsize)) {
+ bitflip_count = erased_sector_bitflips(
+ buf, read_ecc, info);
+
+ if (bitflip_count)
+ stat += bitflip_count;
+ else
+ return -EINVAL;
+ }
+ }
+ }
+
+ /* Update the ecc vector */
+ calc_ecc += ecc_vector_size;
+ read_ecc += ecc_vector_size;
+ }
+
+ /* Check if any error reported */
+ if (!is_error_reported)
+ return 0;
+
+ /* Decode BCH error using ELM module */
+ elm_decode_bch_error_page(info->elm_dev, ecc_vec, err_vec);
+
+ for (i = 0; i < eccsteps; i++) {
+ if (err_vec[i].error_reported) {
+ for (j = 0; j < err_vec[i].error_count; j++) {
+ u32 bit_pos, byte_pos, error_max, pos;
+
+ if (type == BCH8_ECC)
+ error_max = BCH8_ECC_MAX;
+ else
+ error_max = BCH4_ECC_MAX;
+
+ if (info->nand.ecc.strength == BCH8_MAX_ERROR)
+ pos = err_vec[i].error_loc[j];
+ else
+ /* Add 4 to take care 4 bit padding */
+ pos = err_vec[i].error_loc[j] +
+ BCH4_BIT_PAD;
+
+ /* Calculate bit position of error */
+ bit_pos = pos % 8;
+
+ /* Calculate byte position of error */
+ byte_pos = (error_max - pos - 1) / 8;
+
+ if (pos < error_max) {
+ if (byte_pos < 512)
+ data[byte_pos] ^= 1 << bit_pos;
+ else
+ spare_ecc[byte_pos - 512] ^=
+ 1 << bit_pos;
+ }
+ /* else, not interested to correct ecc */
+ }
+ }
+
+ /* Update number of correctable errors */
+ stat += err_vec[i].error_count;
+
+ /* Update page data with sector size */
+ data += info->nand.ecc.size;
+ spare_ecc += ecc_vector_size;
+ }
+
+ for (i = 0; i < eccsteps; i++)
+ /* Return error if uncorrectable error present */
+ if (err_vec[i].error_uncorrectable)
+ return -EINVAL;
+
+ return stat;
+}
+
+/**
* omap3_correct_data_bch - Decode received data and correct errors
* @mtd: MTD device structure
* @data: page data
@@ -1194,6 +1551,92 @@ static int omap3_correct_data_bch(struct mtd_info *mtd, u_char *data,
}
/**
+ * omap_write_page_bch - BCH ecc based write page function for entire page
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
+ *
+ * Custom write page method evolved to support multi sector writing in one shot
+ */
+static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required)
+{
+ int i;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+
+ /* Enable GPMC ecc engine */
+ chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+
+ /* Write data */
+ chip->write_buf(mtd, buf, mtd->writesize);
+
+ /* Update ecc vector from GPMC result registers */
+ chip->ecc.calculate(mtd, buf, &ecc_calc[0]);
+
+ for (i = 0; i < chip->ecc.total; i++)
+ chip->oob_poi[eccpos[i]] = ecc_calc[i];
+
+ /* Write ecc vector to OOB area */
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
+}
+
+/**
+ * omap_read_page_bch - BCH ecc based page read function for entire page
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
+ *
+ * For BCH ecc scheme, GPMC used for syndrome calculation and ELM module
+ * used for error correction.
+ * Custom method evolved to support ELM error correction & multi sector
+ * reading. On reading page data area is read along with OOB data with
+ * ecc engine enabled. ecc vector updated after read of OOB data.
+ * For non error pages ecc vector reported as zero.
+ */
+static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint8_t *oob = &chip->oob_poi[eccpos[0]];
+ uint32_t oob_pos = mtd->writesize + chip->ecc.layout->eccpos[0];
+ int stat;
+ unsigned int max_bitflips = 0;
+
+ /* Enable GPMC ecc engine */
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+
+ /* Read data */
+ chip->read_buf(mtd, buf, mtd->writesize);
+
+ /* Read oob bytes */
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1);
+ chip->read_buf(mtd, oob, chip->ecc.total);
+
+ /* Calculate ecc bytes */
+ chip->ecc.calculate(mtd, buf, ecc_calc);
+
+ memcpy(ecc_code, &chip->oob_poi[eccpos[0]], chip->ecc.total);
+
+ stat = chip->ecc.correct(mtd, buf, ecc_code, ecc_calc);
+
+ if (stat < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+ mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
+
+ return max_bitflips;
+}
+
+/**
* omap3_free_bch - Release BCH ecc resources
* @mtd: MTD device structure
*/
@@ -1218,43 +1661,86 @@ static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
#ifdef CONFIG_MTD_NAND_OMAP_BCH8
- const int hw_errors = 8;
+ const int hw_errors = BCH8_MAX_ERROR;
#else
- const int hw_errors = 4;
+ const int hw_errors = BCH4_MAX_ERROR;
#endif
+ enum bch_ecc bch_type;
+ const __be32 *parp;
+ int lenp;
+ struct device_node *elm_node;
+
info->bch = NULL;
- max_errors = (ecc_opt == OMAP_ECC_BCH8_CODE_HW) ? 8 : 4;
+ max_errors = (ecc_opt == OMAP_ECC_BCH8_CODE_HW) ?
+ BCH8_MAX_ERROR : BCH4_MAX_ERROR;
if (max_errors != hw_errors) {
pr_err("cannot configure %d-bit BCH ecc, only %d-bit supported",
max_errors, hw_errors);
goto fail;
}
- /* software bch library is only used to detect and locate errors */
- info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */);
- if (!info->bch)
- goto fail;
+ info->nand.ecc.size = 512;
+ info->nand.ecc.hwctl = omap3_enable_hwecc_bch;
+ info->nand.ecc.mode = NAND_ECC_HW;
+ info->nand.ecc.strength = max_errors;
- info->nand.ecc.size = 512;
- info->nand.ecc.hwctl = omap3_enable_hwecc_bch;
- info->nand.ecc.correct = omap3_correct_data_bch;
- info->nand.ecc.mode = NAND_ECC_HW;
+ if (hw_errors == BCH8_MAX_ERROR)
+ bch_type = BCH8_ECC;
+ else
+ bch_type = BCH4_ECC;
- /*
- * The number of corrected errors in an ecc block that will trigger
- * block scrubbing defaults to the ecc strength (4 or 8).
- * Set mtd->bitflip_threshold here to define a custom threshold.
- */
+ /* Detect availability of ELM module */
+ parp = of_get_property(info->of_node, "elm_id", &lenp);
+ if ((parp == NULL) && (lenp != (sizeof(void *) * 2))) {
+ pr_err("Missing elm_id property, fall back to Software BCH\n");
+ info->is_elm_used = false;
+ } else {
+ struct platform_device *pdev;
- if (max_errors == 8) {
- info->nand.ecc.strength = 8;
- info->nand.ecc.bytes = 13;
- info->nand.ecc.calculate = omap3_calculate_ecc_bch8;
+ elm_node = of_find_node_by_phandle(be32_to_cpup(parp));
+ pdev = of_find_device_by_node(elm_node);
+ info->elm_dev = &pdev->dev;
+ elm_config(info->elm_dev, bch_type);
+ info->is_elm_used = true;
+ }
+
+ if (info->is_elm_used && (mtd->writesize <= 4096)) {
+
+ if (hw_errors == BCH8_MAX_ERROR)
+ info->nand.ecc.bytes = BCH8_SIZE;
+ else
+ info->nand.ecc.bytes = BCH4_SIZE;
+
+ info->nand.ecc.correct = omap_elm_correct_data;
+ info->nand.ecc.calculate = omap3_calculate_ecc_bch;
+ info->nand.ecc.read_page = omap_read_page_bch;
+ info->nand.ecc.write_page = omap_write_page_bch;
} else {
- info->nand.ecc.strength = 4;
- info->nand.ecc.bytes = 7;
- info->nand.ecc.calculate = omap3_calculate_ecc_bch4;
+ /*
+ * software bch library is only used to detect and
+ * locate errors
+ */
+ info->bch = init_bch(13, max_errors,
+ 0x201b /* hw polynomial */);
+ if (!info->bch)
+ goto fail;
+
+ info->nand.ecc.correct = omap3_correct_data_bch;
+
+ /*
+ * The number of corrected errors in an ecc block that will
+ * trigger block scrubbing defaults to the ecc strength (4 or 8)
+ * Set mtd->bitflip_threshold here to define a custom threshold.
+ */
+
+ if (max_errors == 8) {
+ info->nand.ecc.bytes = 13;
+ info->nand.ecc.calculate = omap3_calculate_ecc_bch8;
+ } else {
+ info->nand.ecc.bytes = 7;
+ info->nand.ecc.calculate = omap3_calculate_ecc_bch4;
+ }
}
pr_info("enabling NAND BCH ecc with %d-bit correction\n", max_errors);
@@ -1270,7 +1756,7 @@ fail:
*/
static int omap3_init_bch_tail(struct mtd_info *mtd)
{
- int i, steps;
+ int i, steps, offset;
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
struct nand_ecclayout *layout = &info->ecclayout;
@@ -1292,11 +1778,21 @@ static int omap3_init_bch_tail(struct mtd_info *mtd)
goto fail;
}
+ /* ECC layout compatible with RBL for BCH8 */
+ if (info->is_elm_used && (info->nand.ecc.bytes == BCH8_SIZE))
+ offset = 2;
+ else
+ offset = mtd->oobsize - layout->eccbytes;
+
/* put ecc bytes at oob tail */
for (i = 0; i < layout->eccbytes; i++)
- layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i;
+ layout->eccpos[i] = offset + i;
+
+ if (info->is_elm_used && (info->nand.ecc.bytes == BCH8_SIZE))
+ layout->oobfree[0].offset = 2 + layout->eccbytes * steps;
+ else
+ layout->oobfree[0].offset = 2;
- layout->oobfree[0].offset = 2;
layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes;
info->nand.ecc.layout = layout;
@@ -1360,6 +1856,9 @@ static int omap_nand_probe(struct platform_device *pdev)
info->nand.options = pdata->devsize;
info->nand.options |= NAND_SKIP_BBTSCAN;
+#ifdef CONFIG_MTD_NAND_OMAP_BCH
+ info->of_node = pdata->of_node;
+#endif
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index dbd3aa574eaf..30bd907a260a 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -174,7 +174,14 @@ out:
return rc;
}
+static void __exit ofpart_parser_exit(void)
+{
+ deregister_mtd_parser(&ofpart_parser);
+ deregister_mtd_parser(&ofoldpart_parser);
+}
+
module_init(ofpart_parser_init);
+module_exit(ofpart_parser_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Parser for MTD partitioning information in device tree");
diff --git a/drivers/mtd/tests/mtd_nandecctest.c b/drivers/mtd/tests/mtd_nandecctest.c
index db2f22e7966a..70106607c247 100644
--- a/drivers/mtd/tests/mtd_nandecctest.c
+++ b/drivers/mtd/tests/mtd_nandecctest.c
@@ -44,7 +44,7 @@ struct nand_ecc_test {
static void single_bit_error_data(void *error_data, void *correct_data,
size_t size)
{
- unsigned int offset = random32() % (size * BITS_PER_BYTE);
+ unsigned int offset = prandom_u32() % (size * BITS_PER_BYTE);
memcpy(error_data, correct_data, size);
__change_bit_le(offset, error_data);
@@ -55,9 +55,9 @@ static void double_bit_error_data(void *error_data, void *correct_data,
{
unsigned int offset[2];
- offset[0] = random32() % (size * BITS_PER_BYTE);
+ offset[0] = prandom_u32() % (size * BITS_PER_BYTE);
do {
- offset[1] = random32() % (size * BITS_PER_BYTE);
+ offset[1] = prandom_u32() % (size * BITS_PER_BYTE);
} while (offset[0] == offset[1]);
memcpy(error_data, correct_data, size);
@@ -68,7 +68,7 @@ static void double_bit_error_data(void *error_data, void *correct_data,
static unsigned int random_ecc_bit(size_t size)
{
- unsigned int offset = random32() % (3 * BITS_PER_BYTE);
+ unsigned int offset = prandom_u32() % (3 * BITS_PER_BYTE);
if (size == 256) {
/*
@@ -76,7 +76,7 @@ static unsigned int random_ecc_bit(size_t size)
* and 17th bit) in ECC code for 256 byte data block
*/
while (offset == 16 || offset == 17)
- offset = random32() % (3 * BITS_PER_BYTE);
+ offset = prandom_u32() % (3 * BITS_PER_BYTE);
}
return offset;
diff --git a/drivers/mtd/tests/mtd_stresstest.c b/drivers/mtd/tests/mtd_stresstest.c
index 2d7e6cffd6d4..787f539d16ca 100644
--- a/drivers/mtd/tests/mtd_stresstest.c
+++ b/drivers/mtd/tests/mtd_stresstest.c
@@ -55,7 +55,7 @@ static int rand_eb(void)
unsigned int eb;
again:
- eb = random32();
+ eb = prandom_u32();
/* Read or write up 2 eraseblocks at a time - hence 'ebcnt - 1' */
eb %= (ebcnt - 1);
if (bbt[eb])
@@ -67,7 +67,7 @@ static int rand_offs(void)
{
unsigned int offs;
- offs = random32();
+ offs = prandom_u32();
offs %= bufsize;
return offs;
}
@@ -76,7 +76,7 @@ static int rand_len(int offs)
{
unsigned int len;
- len = random32();
+ len = prandom_u32();
len %= (bufsize - offs);
return len;
}
@@ -191,7 +191,7 @@ static int do_write(void)
static int do_operation(void)
{
- if (random32() & 1)
+ if (prandom_u32() & 1)
return do_read();
else
return do_write();
diff --git a/drivers/mtd/tests/mtd_torturetest.c b/drivers/mtd/tests/mtd_torturetest.c
index c4cde1e9eddb..3a9f6a6a79f9 100644
--- a/drivers/mtd/tests/mtd_torturetest.c
+++ b/drivers/mtd/tests/mtd_torturetest.c
@@ -208,7 +208,7 @@ static inline int write_pattern(int ebnum, void *buf)
static int __init tort_init(void)
{
int err = 0, i, infinite = !cycles_count;
- int bad_ebs[ebcnt];
+ int *bad_ebs;
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
@@ -250,28 +250,24 @@ static int __init tort_init(void)
err = -ENOMEM;
patt_5A5 = kmalloc(mtd->erasesize, GFP_KERNEL);
- if (!patt_5A5) {
- pr_err("error: cannot allocate memory\n");
+ if (!patt_5A5)
goto out_mtd;
- }
patt_A5A = kmalloc(mtd->erasesize, GFP_KERNEL);
- if (!patt_A5A) {
- pr_err("error: cannot allocate memory\n");
+ if (!patt_A5A)
goto out_patt_5A5;
- }
patt_FF = kmalloc(mtd->erasesize, GFP_KERNEL);
- if (!patt_FF) {
- pr_err("error: cannot allocate memory\n");
+ if (!patt_FF)
goto out_patt_A5A;
- }
check_buf = kmalloc(mtd->erasesize, GFP_KERNEL);
- if (!check_buf) {
- pr_err("error: cannot allocate memory\n");
+ if (!check_buf)
goto out_patt_FF;
- }
+
+ bad_ebs = kcalloc(ebcnt, sizeof(*bad_ebs), GFP_KERNEL);
+ if (!bad_ebs)
+ goto out_check_buf;
err = 0;
@@ -290,7 +286,6 @@ static int __init tort_init(void)
/*
* Check if there is a bad eraseblock among those we are going to test.
*/
- memset(&bad_ebs[0], 0, sizeof(int) * ebcnt);
if (mtd_can_have_bb(mtd)) {
for (i = eb; i < eb + ebcnt; i++) {
err = mtd_block_isbad(mtd, (loff_t)i * mtd->erasesize);
@@ -394,6 +389,8 @@ out:
pr_info("finished after %u erase cycles\n",
erase_cycles);
+ kfree(bad_ebs);
+out_check_buf:
kfree(check_buf);
out_patt_FF:
kfree(patt_FF);
diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h
index 33f8f3b2c9b2..cba89fcd1587 100644
--- a/drivers/mtd/ubi/debug.h
+++ b/drivers/mtd/ubi/debug.h
@@ -86,7 +86,7 @@ static inline int ubi_dbg_is_bgt_disabled(const struct ubi_device *ubi)
static inline int ubi_dbg_is_bitflip(const struct ubi_device *ubi)
{
if (ubi->dbg.emulate_bitflips)
- return !(random32() % 200);
+ return !(prandom_u32() % 200);
return 0;
}
@@ -100,7 +100,7 @@ static inline int ubi_dbg_is_bitflip(const struct ubi_device *ubi)
static inline int ubi_dbg_is_write_failure(const struct ubi_device *ubi)
{
if (ubi->dbg.emulate_io_failures)
- return !(random32() % 500);
+ return !(prandom_u32() % 500);
return 0;
}
@@ -114,7 +114,7 @@ static inline int ubi_dbg_is_write_failure(const struct ubi_device *ubi)
static inline int ubi_dbg_is_erase_failure(const struct ubi_device *ubi)
{
if (ubi->dbg.emulate_io_failures)
- return !(random32() % 400);
+ return !(prandom_u32() % 400);
return 0;
}