{% extends 'base-uboot.jinja2' %}
{% set device_type = "xilinx-zcu102" %}
{% set bootloader_prompt = bootloader_prompt|default('ZynqMP>') %}
{% set booti_kernel_addr = '0x80000' %}
{% set booti_ramdisk_addr = '0x10000000' %}
{% set booti_dtb_addr = '0x14000000' %}
{% set base_ip_args = 'ip=dhcp' %}
{% set uboot_mkimage_arch = 'arm64' %}
{% set uboot_bootx_cmd = "booti {KERNEL_ADDR} {RAMDISK_ADDR} {DTB_ADDR}" %}
{% set uboot_load_fdt = "          - setenv loadfdt 'tftpb {DTB_ADDR} {DTB}'" %}
{% set uboot_tftp_commands =
"          - setenv loadkernel 'tftpb {KERNEL_ADDR} {KERNEL}'
          - setenv loadinitrd 'tftpb {RAMDISK_ADDR} {RAMDISK}; setenv initrd_size ${filesize}'
" + uboot_load_fdt -%}