{% extends 'base-uboot.jinja2' %}
{% set console_device = console_device|default('ttyS0') %}
{% set baud_rate = baud_rate|default(115200) %}
{% set device_type = "sun8i-a33-sinlinx-sina33" %}
{% set bootloader_prompt = bootloader_prompt|default('=>') %}
{% set bootm_kernel_addr = '0x42000000' %}
{% set bootm_ramdisk_addr = '0x43300000' %}
{% set bootm_dtb_addr = '0x43000000' %}
{% set bootz_kernel_addr = bootm_kernel_addr %}
{% set bootz_ramdisk_addr = bootm_ramdisk_addr %}
{% set bootz_dtb_addr = bootm_dtb_addr %}
{% set base_ip_args = 'ip=dhcp' %}
{% set uboot_mkimage_arch = 'arm' %}
{% set uboot_tftp_commands = ("          - setenv loadkernel 'tftp {KERNEL_ADDR} {KERNEL}'
          - setenv loadinitrd 'tftp {RAMDISK_ADDR} {RAMDISK}'
          - setenv initrd_size ${filesize}
          - setenv loadfdt 'tftp {DTB_ADDR} {DTB}'") -%}
{# Need to split the long line in many small ones since U-boot breaks the end of
too long commands.  #}
{% set uboot_tftp_bootcmd = ("          - usb reset
          - " + uboot_ipaddr_cmd|default('dhcp') + "
          - setenv serverip {SERVER_IP}
          - run loadkernel
          - run loadinitrd
          - \"run loadfdt; " + uboot_bootx_cmd|default('{BOOTX}') + "\"") -%}