# Common parameters for Raspberry pi boards, load address are the same for A,
# A+, B, B+, Compute Module, Zero, 2 and 3 running u-boot.
{% extends 'base-uboot.jinja2' %}

{% set bootm_kernel_addr = '0x01000000' %}
{% set bootm_ramdisk_addr = '0x02100000' %}
{% set bootm_dtb_addr = '0x00000100' %}
{% set bootz_kernel_addr = bootm_kernel_addr %}
{% set bootz_ramdisk_addr = bootm_ramdisk_addr %}
{% set bootz_dtb_addr = bootm_dtb_addr %}
{% set uboot_mkimage_arch = 'arm' %}

{% set uboot_needs_usb = true %}
{% set bootloader_prompt = bootloader_prompt|default('U-Boot>') %}
{% set console_device = console_device|default('ttyAMA0') %}