{% extends 'base.jinja2' %}

{% set console_device = console_device | default('ttyS0') %}
{% set baud_rate = baud_rate | default('115200') %}
{% set base_kernel_args = base_kernel_args | default('') %}

{% set tftp_bootargs = tftp_bootargs | default('console=' + console_device + ',' + baud_rate + ' earlyprintk=uart8250-32bit,0x1c020000 debug root=/dev/nfs rw nfsroot={SERVER_IP}:{NFSROOTFS},tcp,hard,intr {{ base_ip_args }}') %}
{% set nor_flash_bootargs = nor_flash_bootargs | default('dtb=board.dtb initrd=ramdisk.img console=' + console_device + ',' + baud_rate + ' androidboot.hardware=juno systemd.log_target=null rootwait root=/dev/sda1') %}

{% if not hard_reset_command %}
    {% if power_off_command and power_on_command %}
        {% set hard_reset_command = power_off_command + '; sleep 10; ' + power_on_command %}
    {% endif %}
{% endif %}

{% block body %}

device_type: juno

character_delays:
  boot: 50

actions:
  deploy:
    # list of deployment methods which this device supports
    methods:
      tftp:
  boot:
    # list of connection methods which this device supports
    connections:
      serial:
    # list of boot methods which this device supports.
    methods:
      uefi-menu:
        parameters:
          character_delay: 300
          interrupt_prompt: The default boot selection will start in
          interrupt_string: ' '
          item_markup:
            - "["
            - "]"
          item_class: '0-9'
          separator: ' '
          label_class: 'a-zA-Z0-9\s\:'
          bootloader_prompt: 'Start:'
          boot_message: "Loaded: LinuxImage"
          # interrupt: # character needed to interrupt u-boot, single whitespace by default
          # method specific stanza
        nor_flash:
        -  select:
            items:
             - 'Boot Manager'
            wait: "Choice:"
        - select:
            items:
               - 'Add Boot Device Entry'
            wait: "Select the Boot Device:"
        - select:
            items:
               - 'NOR Flash'
            wait: "File path of the EFI Application or the kernel:"
        - select:
            enter: norkern
            wait: "Is an EFI Application?"
        - select:
            enter: n
            wait: "Has FDT support?"
        - select:
            enter: y
            wait: "Add an initrd:"
        - select:
            enter: n
            wait: 'Arguments to pass to the binary:'
        - select:
            enter: "{{ nor_flash_bootargs }}"
            wait: 'Description for this new Entry:'
        - select:
            enter: '{TEST_MENU_NAME}'
            wait: "Choice:"
        - select:
            items:
              - 'Update FDT path'
            wait: "Select the Boot Device:"
        - select:
            items:
               - 'TFTP on MAC Address: {{ mac_address }}'
            wait: "File path of the FDT blob:"
        - select:
            enter: 'board.dtb'
            wait: "Choice:"
        - select:
            items:
               - 'Return to main menu'
            wait: "Start:"
        - select:
            items:
              - '{TEST_MENU_NAME}'
        tftp:
        - select:
            items:
             - 'Boot Manager'
            wait: "Choice:"
        - select:
            items:
               - 'Add Boot Device Entry'
            wait: "Select the Boot Device:"
        - select:
            items:
               - 'TFTP on MAC Address: {{ mac_address }}'
            wait: "Get the IP address from DHCP:"
        - select:
            enter: y
            wait: "Get the TFTP server IP address:"
        - select:
            enter: '{SERVER_IP}'
            wait: "File path of the EFI Application or the kernel :"
        - select:
            enter: '{KERNEL}'
            wait: "Is an EFI Application?"
        - select:
            enter: n
            wait: "Has FDT support?"
        - select:
            enter: y
            wait: "Add an initrd:"
        - select:
            enter: n
            wait: 'Arguments to pass to the binary:'
        - select:
            enter: "{{ tftp_bootargs }}"
            wait: 'Description for this new Entry:'
        - select:
            enter: '{TEST_MENU_NAME}'
            wait: "Choice:"
        - select:
            items:
              - 'Update FDT path'
            wait: "Select the Boot Device:"
        - select:
            items:
               - 'TFTP on MAC Address: {{ mac_address }}'
            wait: "Get the IP address from DHCP:"
        - select:
            enter: y
            wait: "Get the TFTP server IP address:"
        - select:
            enter: '{SERVER_IP}'
            wait: "File path of the FDT blob :"
        - select:
            enter: '{DTB}'
            wait: "Choice:"
        - select:
            items:
               - 'Return to main menu'
            wait: "Start:"
        - select:
            items:
              - '{TEST_MENU_NAME}'
{% endblock body %}


{% block vland %}
parameters:
  media:  # four USB slots.
    usb:
      UUID-required: True
      {{ usb_label|default('Kingston_DataTraveler') }}:
        uuid: "{{ usb_uuid }}"
        device_id: {{ usb_device_id|default(0) }}  # the bootloader device id for this media on the 'usb' interface
{% endblock vland %}