{# Base Kernel options #}
{% set base_kernel_args = '' %}
{% set base_extra_nfsroot_args = extra_nfsroot_args | default('') %}

{% set base_nfsroot_args = ("nfsroot={NFS_SERVER_IP}:{NFSROOTFS},tcp,hard,intr" + base_extra_nfsroot_args) -%}
{% set base_nbdroot_args = ("nbd.server={NBDSERVERIP} nbd.port={NBDSERVERPORT} root=/dev/ram0 ramdisk_size=16384 rootdelay=7 ") -%}
{% set base_ip_args = base_ip_args|default("ip=dhcp") %}
{# these options are used by both ssh and scp! #}
{# check the manpages *carefully* & ensure compatibility! #}
{# Do not specify port or login (-p/-P or -l) here as this is now handled in the codebase. #}
{% set ssh_options = (
"          - '-o'
          - 'Compression=yes'
          - '-o'
          - 'PasswordAuthentication=no'
          - '-o'
          - 'LogLevel=FATAL'
"
) -%}

{% set ssh_user = 'root' -%}

{# The code will create the correct port arguments for SCP and SSH, as they are different #}
{% set ssh_port = '22' -%}

{# This is no longer a requirement, to support devices that allow login without authentication #}
{% set ssh_identity_file = 'dynamic_vm_keys/lava' -%}

{% set schroot_options = (
"          - 'schroot'
          - '-d'
          - '/'
          - '-u'
          - 'root'"
) -%}

{# UEFI menu support #}
{% set base_menu_interrupt_prompt = 'The default boot selection will start in' -%}
{% set base_menu_interrupt_string = ' ' -%}
{% set base_item_markup_list = (
'            - "["
            - "]"'
) -%}
{% set base_item_class = '0-9' -%}
{% set base_item_separator = ' ' -%}
{% set base_label_class = 'a-zA-Z0-9\\s\\:' -%}
{% set base_menu_bootloader_prompt = 'Start:' -%}
{% set base_menu_boot_message = "Loaded: LinuxImage" -%}
{% set base_menu_dictionary = {} -%}

{% block character_delays %}
{% if boot_character_delay or test_character_delay %}
character_delays:
{% if boot_character_delay %}
      boot: {{ boot_character_delay }}
{% endif -%}
{% if test_character_delay %}
      test: {{ test_character_delay }}
{% endif -%}
{% endif -%}
{% endblock character_delays -%}

{% block constants %}
constants:
  # bootloader specific
  u-boot:
    interrupt-prompt: '{{ uboot_autoboot_prompt | default("Hit any key to stop autoboot") }}'
    interrupt-character: '{{ uboot_interrupt_character | default(" ") }}'
    final-message: '{{ uboot_final_message | default("Starting kernel") }}'
    error-messages:
      - 'Resetting CPU'
      - 'Must RESET board to recover'
      - 'TIMEOUT'
      - 'Retry count exceeded'
      - 'ERROR: The remote end did not respond in time.'
{% if uboot_extra_error_message %}
      - '{{ uboot_extra_error_message }}'
{% endif %}
  grub:
    interrupt-prompt: '{{ grub_autoboot_prompt | default("Press enter to boot the selected OS") }}'
    interrupt-character: '{{ grub_interrupt_character | default ("c") }}'
    error-messages:
      - "error: missing (.*) symbol."
  grub-efi:
    interrupt-prompt: '{{ grub_autoboot_prompt | default("Press enter to boot the selected OS") }}'
    interrupt-character: '{{ grub_interrupt_character | default ("c") }}'
    error-messages:
      - 'Undefined OpCode Exception PC at'
      - 'Synchronous Exception at'
      - "error: missing (.*) symbol."
  ipxe:
    interrupt-prompt: '{{ ipxe_autoboot_prompt  | default("Press Ctrl-B for the iPXE command line") }}'
    interrupt_ctrl_list: {{ ipxe_interrupt_ctrl_list  | default(['b']) }}
    error-messages:
      - 'No configuration methods succeeded'
      - 'Connection timed out'

  # OS shutdown message
  # Override: set as the shutdown-message parameter of an Action.
  # SHUTDOWN_MESSAGE
  shutdown-message: '{{ shutdown_message | default("The system is going down for reboot NOW") }}'

  # Kernel starting message
  kernel-start-message: '{{ kernel_start_message | default('Linux version [0-9]') }}'

  # Default shell prompt for AutoLogin
  # DEFAULT_SHELL_PROMPT
  default-shell-prompt: '{{ default_shell_prompt | default("lava-test: # ") }}'

{% endblock constants -%}

{% block commands %}
{% if connection_command or user_commands or connection_list %}
commands:
{% if connection_command %}
    connect: {{ connection_command }}
{% elif connection_list %}
    connections:
{% for hardware in connection_list %}
        {{ hardware }}:
            connect: {{ connection_commands.get(hardware) }}
{% if hardware in connection_tags %}
            tags:
{% if connection_tags.get(hardware) is not string %}
{% for tag in connection_tags.get(hardware) %}
            - {{ tag }}
{% endfor -%}  {# tag #}
{% endif -%}  {# is list #}
{% endif -%}  {# if hardware #}
{% endfor %}
{% endif -%}
{% if hard_reset_command %}
    hard_reset: {{ hard_reset_command }}
{% endif -%}
{% if soft_reset_command %}
    soft_reset: {{ soft_reset_command }}
{% endif -%}
{% if soft_reboot_command %}
    soft_reboot: {{ soft_reboot_command }}
{% endif -%}
{% if power_off_command %}
    power_off: {{ power_off_command }}
{% endif %}
{% if power_on_command %}
    power_on: {{ power_on_command }}
{% endif %}
{% if pre_power_command %}
    pre_power_command: {{ pre_power_command }}
{% endif -%}
{% if pre_os_command %}
    pre_os_command: {{ pre_os_command }}
{% endif -%}
{% if user_commands %}
    users:
{% for name, command in user_commands.items() %}
      {{ name }}:
        do: {{ command['do'] }}
{% if 'undo' in command %}
        undo: {{ command['undo'] }}
{% endif %}
{% endfor %}

{% endif %}
{% endif %}
{% endblock commands -%}

{% if device_info %}
{# LXC support for dynamic devices over usb etc. #}
{# admins need to ensure that the device dictionary sets this as a list of dictionaries, where each dictionary value can contain keys such as 'board_id', 'usb_vendor_id', 'usb_product_id'  #}
device_info: {{ device_info }}
{% endif -%}

{% if static_info %}
{# LXC support for adding static devices like energy probes. #}
{# Also used for some phones which need to stay in the bootloader to charge. #}
{# admins need to ensure that the device dictionary sets this as a list of dictionaries, where each dictionary value can contain keys such as 'board_id', 'usb_vendor_id', 'usb_product_id'  #}
static_info: {{ static_info }}
{% endif -%}

{% if storage_info %}
{# Test shell support for exposing temporary storage. #}
{# admins need to ensure that the device dictionary sets this as a list of dictionaries,
where each dictionary value can contain method names such as 'SATA' with the corresponding
value of the block device ID such as '/dev/disk/by-id/ata-ST500DM002-1BD142_W3T79GCW' #}
storage_info: {{ storage_info }}
{% endif -%}

{% block fastboot %}
{% if fastboot_serial_number %}
flash_cmds_order: {{ flash_cmds_order|default(['update', 'ptable',
                     'partition', 'hyp', 'modem', 'rpm', 'sbl1', 'sbl2',
                     'sec', 'tz', 'aboot', 'boot', 'rootfs', 'vendor',
                     'system', 'cache', 'userdata']) }}
{% endif -%}
{% endblock fastboot -%}

{% block vland %}
parameters:
{% if interfaces or device_ip or device_mac %}
  interfaces:
{% if device_ip or device_mac %}
    target:
      ip: {{ device_ip|default('') }}
      mac: '{{ device_mac|default('') }}'
{% endif %}  # device_ip or device_mac
{% for interface in interfaces %}
    {{ interface }}:
      sysfs: "{{ sysfs.get(interface) }}"
      mac: "{{ mac_addr.get(interface) }}"
{% for switch, port in map.get(interface).items() %}
      switch: "{{ switch }}"
      port: {{ port }}
{% endfor %}  # switch, port
      tags:
{% if tags.get(interface) %}
{% for tag in tags.get(interface) %}
      - {{ tag }}
{% endfor %}
{% endif %}  # tags
{% endfor %}  # interfaces
{% endif %}  # interfaces or device_ip or device_mac

{% if sata_uuid or sd_uuid or usb_uuid %}
  media:
{% if sata_uuid %}
    sata:
      UUID-required: {{ uuid_required|default(True) }}
      {{ sata_label|default('ST160LM003') }}:
        uuid: {{ sata_uuid }}
        device_id: {{ sata_id|default(0) }}
{# FIXME: merge into just sata_interface with changes in lava-dispatcher #}
        uboot_interface: {{ sata_interface|default('scsi') }}
        grub_interface: {{ sata_interface|default('hd0') }}
        boot_part: {{ boot_part|default(1) }}
{% endif %} #  sata_uuid
{% if sd_uuid %}
    sd:
      {{ sd_label }}:
        uuid: {{ sd_uuid }}
        device_id: {{ sd_device_id }}  # the bootloader device id for this media on the 'sd' interface
{% endif %} #  sd_uuid
{% if usb_uuid %}
    usb:
      {{ usb_label|default('SanDisk_Ultra') }}:
        uuid: {{ usb_uuid }}  # /dev/disk/by-id/
        device_id: {{ usb_device_id }}  # the bootloader device id for this media on the 'usb' interface
{% endif %} # usb_uuid
{% else %}
  pass:
{%- endif %} # sata_uuid_sd_uuid_usb_uuid
{% endblock vland -%}

{% block body %}{% endblock body -%}

{% block timeouts %}
timeouts:
  actions:
    apply-overlay-image:
      minutes: {{ action_timeout_apply_overlay_image | default(2) }}
    dd-image:
      minutes: {{ action_timeout_dd_image | default(10) }}
    download-retry:
      minutes: {{ action_timeout_download_retry | default(5) }}
    http-download:
      minutes: {{ action_timeout_http_download | default(5) }}
    lava-test-shell:
      minutes: {{ action_timeout_lava_test_shell | default(3) }}
    nfs-deploy:
      minutes: {{ action_timeout_nfs_deploy | default(10) }}
    power-off:
      seconds: {{ action_timeout_power_off | default(5) }}
    bootloader-commands:
      minutes: {{ action_timeout_bootloader_commands | default(3) }}
    bootloader-interrupt:
      seconds: {{ action_timeout_bootloader_interrupt | default(30) }}
    u-boot-interrupt:
      seconds: {{ action_timeout_u_boot_interrupt | default(30) }}
    umount-retry:
      seconds: {{ action_timeout_umount_retry | default(45) }}
    auto-login-action:
      minutes: {{ action_timeout_auto_login | default(2) }}
    bootloader-action:
      minutes: {{ action_timeout_bootloader_action | default(3)}}
    uboot-action:
      minutes: {{ action_timeout_uboot_action | default(3)}}
    uboot-retry:
      minutes: {{ action_timeout_uboot_retry | default(3)}}
    bootloader-retry:
      minutes: {{ action_timeout_bootloader_retry | default(3)}}
    boot-qemu-image:
      minutes: {{ action_timeout_boot_qemu_image | default(2) }}
    boot-image-retry:
      minutes: {{ action_timeout_boot_image_retry | default(2) }}
    flash-uboot-ums:
      minutes: {{ action_timeout_flash_uboot_ums | default(20) }}
  connections:
    dd-image:
      minutes: {{ connection_timeout_dd_image | default(10) }}
    uboot-retry:
      seconds: {{ connection_timeout_uboot_retry | default(30) }}
    bootloader-commands:
      seconds: {{ connection_timeout_bootloader_commands | default(30) }}
    auto-login-action:
      minutes: {{ connection_timeout_auto_login | default(2) }}
    bootloader-interrupt:
      seconds: {{ connection_timeout_bootloader_interrupt | default(30) }}
    u-boot-interrupt:
      seconds: {{ connection_timeout_u_boot_interrupt | default(30) }}
    lava-test-shell:
      seconds: {{ connection_timeout_feedback | default(10) }}
{% endblock timeouts -%}