{% extends 'base-uboot.jinja2' %}
{% set console_device = console_device|default('ttyS0,115200 console=ttyAT0') %}
{% set baud_rate = baud_rate|default(115200) %}
{% set device_type = "at91sam9m10g45ek" %}
{% set bootloader_prompt = bootloader_prompt|default('U-Boot>') %}
{% set bootm_kernel_addr = '0x71000000' %}
{% set bootm_ramdisk_addr = '0x73000000' %}
{% set bootm_dtb_addr = '0x70f00000' %}
{% set base_ip_args = 'ip=dhcp' %}
{% set uboot_mkimage_arch = 'arm' %}
{% set append_dtb = true %}
{% set use_xip = true %}
{% set uboot_bootx_cmd = "bootm {KERNEL_ADDR} {RAMDISK_ADDR}" %}